Public report of Angular2Guy/MovieManager, published 22 October 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.10.5). Watchdog signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 22 October 2026, 08:29 UTC · Survey ID cd_f856ccb4a5e84ca6878642bc0e9fd040

Angular2Guy/MovieManager

Measured 22 October 2026, 08:27 UTC, at code version 67173c1

Code coverage: not measuredTest reliability: not measuredKnowledge freshness: not measured

Code coverage is not measured: JavaScript/TypeScript suite (CouldNotMeasureRepoBuildError).

Test reliability is not measured: The JS/TS suite's lockfile was refused.

Knowledge freshness is not measured: Freshness signal contradicted by repo activity.

CAI score 44out of 100 At risk Down 1 since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

Domain Modelling 95 Exemplary Architecture 91 Exemplary Maturity 76 Strong Code Health 67 Adequate Security and Compliance 60 Adequate Accessibility 35 Weak Production Readiness 33 Weak

A small codebase: 6,901 lines of product code in 3 projects, tests not counted · Estimated rebuild effort: about 0.1 person-years · Weakest lens: Production Readiness, 33

Findings by how serious they are

62 critical 104 serious 34 minor

13 dimensions are left out of the score. For each one, Watchdog either couldn't measure it in this code, or found no evidence of the safeguard it looks for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Watchdog
Producer
Canine Development
Analyzer
Watchdog engine 1.0.0
Measured
22 October 2026, 08:27 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds Watchdog. It is open to any tool that implements it, and today Watchdog is the only one that does.

A critical security finding is open, such as a library with a known critical vulnerability or a password or key found in the code. The score itself is unchanged, but its band shows At risk until the finding is fixed. See the Security and Compliance lens.

The score is deterministic, which means the same code always gets the same score. Watchdog works it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

90of 93 dimensions measured by tools. The other 3 are advisory notes from an AI model, which explain the code but don't count towards the score.
179of 200 findings point to an exact file and line, so you can open each one in the code. The other 21 concern the repository as a whole, such as missing documentation.
93dimensions across 7 lenses, read from 6,901 lines of product code in 3 projects.
Chapters

Executive summary

Angular2Guy/MovieManager scores 44 out of 100, but it is rated At risk while a critical security finding is open; the score itself is unchanged.

The weakest lens counts most in the score, and here that is Production Readiness, which scores 33 and is rated Weak. Its DR & Backup dimension scores 0 out of 10, and until that reaches 4, Production Readiness can't be rated higher than Adequate. The first actions are to resolve the 1 Leaked secret finding(s) in Secret Scanning and to resolve the 14 No assertions finding(s) in Test Quality, and if Production Readiness rose to 70, the score would rise from 44 to about 52.

62 findings are critical: 25 in Dependency Vulnerabilities, 11 in Forms & labels, six in Static Analysis (SAST), five in Secrets (history), four in IaC & Container Security, four in Page structure, three in Text alternatives, one in ARIA correctness, one in Secret Scanning, one in Test Quality and one in Test Reliability.

Watchdog couldn't measure 13 dimensions in this code, among them Dependency Hygiene, License Compliance and Internal API Consistency, so they are left out of the score. The product code is 6,901 lines, which would take an estimated 0.1 person-years, around €7,900, to rebuild.

Code Health 67 Adequate, capped by Nullable reference types Architecture 91 ★ Exemplary Maturity 76 Strong Production Readiness 33 Weak, capped by Test Quality, Test Coverage and DR & Backup Security and Compliance 60 Adequate, capped by Dependency Vulnerabilities and Supply-chain Provenance & Signing Domain Modelling 95 ★ Exemplary Accessibility 35 Weak, capped by Text alternatives and Keyboard semantics

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Production Readiness 33 · counts for 46%Accessibility 35 · counts for 25%Security and Compliance 60 · counts for 14%Code Health 67 · counts for 8%Maturity 76 · counts for 4%Architecture 91 · counts for 2%Domain Modelling 95 · counts for 1%

If Production Readiness rose from 33 to 70, the lowest score rated Strong, the score would rise from 44 to about 52.

Code composition: what the lines of code are
Product code 88%Tests 12%
New since the last survey: 43 findings

These 43 critical or serious findings weren't in the previous survey, on 8 October 2026.

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 33 findings

These 33 critical or serious findings were in the previous survey, on 8 October 2026, and are gone from this one.

  • Dependency Vulnerabilities · Critical CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · Critical CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: [GHSA redacted] REDACTED
  • Dependency Vulnerabilities · High CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · Medium CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · Medium CVE: [GHSA redacted] backend/pom.xml
  • Dependency Vulnerabilities · Medium CVE: REDACTED REDACTED
  • Dependency Vulnerabilities · Medium CVE: REDACTED REDACTED
  • Supply-chain Provenance & Signing REDACTED
  • Test Coverage · No test reaches this file frontend/src/angular/src/test.ts
  • Dependency Freshness · Dependency Freshness
  • Dead Code · Dead file (~17 LoC) frontend/src/angular/src/test.ts
  • Dependency Hygiene · Unused dependency 'istanbul-lib-instrument'
  • Page structure · <html> without a lang backend/target/classes/static/index.html
  • Page structure · Document without a <title> backend/target/classes/static/index.html
  • Page structure · Page without a main landmark backend/target/classes/static/index.html
Rebuild cost: about €7,900 · Estimate
Cost to rebuild€2,600 to €13,000, for 43 to 138 hours of work, about 0.1 person-years for one engineer
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 44. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeSmall: 6,901 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 1 Leaked secret finding(s) in Secret Scanning — start with REDACTED.
Raises the score by about 9 points · Low effort · Secret Scanning
2
Resolve the 14 No assertions finding(s) in Test Quality — start with ActorControllerTest.java (6), MyArchitectureTests.java (5), MovieControllerTest.java (3).
Raises the score by about 8 points · Medium effort · Test Quality
3
Resolve the 1 No assertions (empty test) finding(s) in Test Quality — start with MoviemanagerApplicationTests.java.
Raises the score by about 3 points · Low effort · Test Quality

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk
This code would cost about €7,900 to build again, about 0.1 person-years of work. Its weakest lens is Production Readiness, at 33 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.
Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts
What to do: Start with the Production Readiness actions in Top priorities.
If you do one thing first · First action
Resolve the 1 Leaked secret finding(s) in Secret Scanning. Of all the actions in this report, it raises the score most for the work it takes: about 9 points for low effort, because it clears the 1 Secret Scanning findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

41 modules, with 44 dependencies between them. Every module uses only modules listed above it, so there are no loops.

The table shows the 40 modules with the most connections; 1 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →1 ch.xxx.moviemanager2 ch.xxx.moviemanager.domain.common3 ch.xxx.moviemanager.domain.exceptions4 ch.xxx.moviemanager.domain.model.dto5 ch.xxx.moviemanager.domain.utils6 frontend.src.angular.e2e.src.app_po7 frontend.src.angular.src8 frontend.src.angular.src.app.app_component9 frontend.src.angular.src.app.model.actor10 frontend.src.angular.src.app.model.common11 frontend.src.angular.src.app.model.genere12 frontend.src.angular.src.app.model.movie13 frontend.src.angular.src.app.model.movie-filter-criteria14 frontend.src.angular.src.app.model.search-phrase15 frontend.src.angular.src.app.model.search-string16 frontend.src.angular.src.app.model.search-term17 frontend.src.angular.src.app.model.user18 frontend.src.angular.src.app.services.users_service19 ch.xxx.moviemanager.domain.client20 ch.xxx.moviemanager.domain.model.entity21 ch.xxx.moviemanager.domain.producer22 frontend.src.angular.src.app.login.login_component23 frontend.src.angular.src.app.model.actor-filter-criteria24 frontend.src.angular.src.app.model.cast25 frontend.src.angular.src.app.services.movies_service26 ch.xxx.moviemanager.adapter.client27 ch.xxx.moviemanager.adapter.repository28 ch.xxx.moviemanager.usecase.mapper29 frontend.src.angular.src.app.filter-movies.filter-movies_component30 frontend.src.angular.src.app.movie-import.movie-import_component31 frontend.src.angular.src.app.movies.movies_component32 frontend.src.angular.src.app.services.actors_service33 ch.xxx.moviemanager.usecase.service34 frontend.src.angular.src.app.actors.actors_component35 frontend.src.angular.src.app.filter-actors.filter-actors_component36 frontend.src.angular.src.app.search.search_component37 ch.xxx.moviemanager.adapter.config38 ch.xxx.moviemanager.adapter.controller39 ch.xxx.moviemanager.adapter.cron40 ch.xxx.moviemanager.adapter.events
1 ch.xxx.moviemanager
2 ch.xxx.moviemanager.domain.common
3 ch.xxx.moviemanager.domain.exceptions
4 ch.xxx.moviemanager.domain.model.dto
5 ch.xxx.moviemanager.domain.utils
6 frontend.src.angular.e2e.src.app_po
7 frontend.src.angular.src
8 frontend.src.angular.src.app.app_component
9 frontend.src.angular.src.app.model.actor
10 frontend.src.angular.src.app.model.common
11 frontend.src.angular.src.app.model.genere
12 frontend.src.angular.src.app.model.movie
13 frontend.src.angular.src.app.model.movie-filter-criteria
14 frontend.src.angular.src.app.model.search-phrase
15 frontend.src.angular.src.app.model.search-string
16 frontend.src.angular.src.app.model.search-term
17 frontend.src.angular.src.app.model.user
18 frontend.src.angular.src.app.services.users_service
19 ch.xxx.moviemanager.domain.client5
20 ch.xxx.moviemanager.domain.model.entity6
21 ch.xxx.moviemanager.domain.producer5
22 frontend.src.angular.src.app.login.login_component1
23 frontend.src.angular.src.app.model.actor-filter-criteria1
24 frontend.src.angular.src.app.model.cast11
25 frontend.src.angular.src.app.services.movies_service1
26 ch.xxx.moviemanager.adapter.client51
27 ch.xxx.moviemanager.adapter.repository615
28 ch.xxx.moviemanager.usecase.mapper66
29 frontend.src.angular.src.app.filter-movies.filter-movies_component1111
30 frontend.src.angular.src.app.movie-import.movie-import_component11
31 frontend.src.angular.src.app.movies.movies_component1
32 frontend.src.angular.src.app.services.actors_service1
33 ch.xxx.moviemanager.usecase.service116312027
34 frontend.src.angular.src.app.actors.actors_component1
35 frontend.src.angular.src.app.filter-actors.filter-actors_component111
36 frontend.src.angular.src.app.search.search_component111
37 ch.xxx.moviemanager.adapter.config2
38 ch.xxx.moviemanager.adapter.controller1224
39 ch.xxx.moviemanager.adapter.cron4
40 ch.xxx.moviemanager.adapter.events621
Uses a module listed above itPart of a loopThe module itself
1 ch.xxx.moviemanager2 ch.xxx.moviemanager.domain.common3 ch.xxx.moviemanager.domain.exceptions4 ch.xxx.moviemanager.domain.model.dto5 ch.xxx.moviemanager.domain.utils6 frontend.src.angular.e2e.src.app_po7 frontend.src.angular.src8 frontend.src.angular.src.app.app_component9 frontend.src.angular.src.app.model.actor10 frontend.src.angular.src.app.model.common11 frontend.src.angular.src.app.model.genere12 frontend.src.angular.src.app.model.movie13 frontend.src.angular.src.app.model.movie-filter-criteria14 frontend.src.angular.src.app.model.search-phrase15 frontend.src.angular.src.app.model.search-string16 frontend.src.angular.src.app.model.search-term17 frontend.src.angular.src.app.model.user18 frontend.src.angular.src.app.services.users_service19 ch.xxx.moviemanager.domain.client20 ch.xxx.moviemanager.domain.model.entity21 ch.xxx.moviemanager.domain.producer22 frontend.src.angular.src.app.login.login_component23 frontend.src.angular.src.app.model.actor-filter-criteria24 frontend.src.angular.src.app.model.cast25 frontend.src.angular.src.app.services.movies_service26 ch.xxx.moviemanager.adapter.client27 ch.xxx.moviemanager.adapter.repository28 ch.xxx.moviemanager.usecase.mapper29 frontend.src.angular.src.app.filter-movies.filter-movies_component30 frontend.src.angular.src.app.movie-import.movie-import_component31 frontend.src.angular.src.app.movies.movies_component32 frontend.src.angular.src.app.services.actors_service33 ch.xxx.moviemanager.usecase.service34 frontend.src.angular.src.app.actors.actors_component35 frontend.src.angular.src.app.filter-actors.filter-actors_component36 frontend.src.angular.src.app.search.search_component37 ch.xxx.moviemanager.adapter.config38 ch.xxx.moviemanager.adapter.controller39 ch.xxx.moviemanager.adapter.cron40 ch.xxx.moviemanager.adapter.eventsch.xxx.moviemanager1ch.xxx.moviemanager.domain.common2ch.xxx.moviemanager.domain.exceptions3ch.xxx.moviemanager.domain.model.dto4ch.xxx.moviemanager.domain.utils5frontend.src.angular.e2e.src.app_po6frontend.src.angular.src7frontend.src.angular.src.app.app_component8frontend.src.angular.src.app.model.actor9frontend.src.angular.src.app.model.common10frontend.src.angular.src.app.model.genere11frontend.src.angular.src.app.model.movie12frontend.src.angular.src.app.model.movie-filter-criteria13frontend.src.angular.src.app.model.search-phrase14frontend.src.angular.src.app.model.search-string15frontend.src.angular.src.app.model.search-term16frontend.src.angular.src.app.model.user17frontend.src.angular.src.app.services.users_service18ch.xxx.moviemanager.domain.client19ch.xxx.moviemanager.domain.model.entity20ch.xxx.moviemanager.domain.producer21frontend.src.angular.src.app.login.login_component22frontend.src.angular.src.app.model.actor-filter-criteria23frontend.src.angular.src.app.model.cast24frontend.src.angular.src.app.services.movies_service25ch.xxx.moviemanager.adapter.client26ch.xxx.moviemanager.adapter.repository27ch.xxx.moviemanager.usecase.mapper28frontend.src.angular.src.app.filter-movies.filter-movies_component29frontend.src.angular.src.app.movie-import.movie-import_component30frontend.src.angular.src.app.movies.movies_component31frontend.src.angular.src.app.services.actors_service32ch.xxx.moviemanager.usecase.service33frontend.src.angular.src.app.actors.actors_component34frontend.src.angular.src.app.filter-actors.filter-actors_component35frontend.src.angular.src.app.search.search_component36ch.xxx.moviemanager.adapter.config37ch.xxx.moviemanager.adapter.controller38ch.xxx.moviemanager.adapter.cron39ch.xxx.moviemanager.adapter.events40565111115161566111111111163120271111111212244621+1 more modules (most-connected shown)

At a glance — Code Health · 67% · Adequate · gated by X5 ·

The Good
D1 · .NET / C# Cyclomatic Complexity 10.0 D2 · .NET / C# Cognitive Complexity 9.8 D3 · .NET / C# God Classes 10.0 D4 · .NET / C# Code Duplication 9.6 D17 · .NET / C# Explicit Debt 10.0 IC1 · Repo Incompleteness & stubs 10.0 R1 · React / TS Type Safety 10.0 R10 · React / TS Code Duplication 8.9 R2 · React / TS Cyclomatic Complexity 10.0 R3 · React / TS Large Files 10.0 R7 · React / TS Dead Code 9.9 X1 · Repo Async correctness 10.0 X12 · Repo Unreachable branch 10.0 X13 · Repo Undrained process stream 10.0 X16 · Repo Unfloored truncation loop 10.0 X18 · Repo Disposal-pattern correctness 10.0 X19 · Repo Unrestored process-global state 10.0 X20 · Repo Mistyped argument guard 10.0 X21 · Repo Side-effecting pattern guard 10.0 X22 · Repo Contradicted release guard 10.0 X23 · Repo Unguarded diagnostic materialisation 10.0 X25 · Repo Inert configuration knob 10.0 X26 · Repo Unsynchronised callback handoff 10.0 X27 · Repo Collection changed while being enumerated 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X3 · Repo Exception handling 10.0 X30 · Repo Support guard that admits what it rejects 10.0
The Bad
X4 · Repo Structured logging 5.3
The Ugly
X5 · Repo Nullable reference types 1.4

At a glance — Architecture · 91% · Exemplary ·

The Good
D5 · .NET / C# Coupling 10.0 D6 · .NET / C# Cohesion (LCOM4) 10.0 D26 · .NET / C# Project Cohesion 10.0 D35 · .NET / C# Change Coupling 8.8 AX1 · Repo Captive dependencies 10.0 AX10 · Repo Code composition 7.2 AX2 · Repo Stateful singletons 10.0 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 AX6 · Repo Interface segregation 10.0 R9 · React / TS Circular Imports 10.0

At a glance — Maturity · 76% · Strong ·

The Good
D15 · .NET / C# Churn × Complexity Hotspots 10.0 D21 · .NET / C# Naming Consistency 10.0 M1 · Repo Documentation (README) 8.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0
The Bad
D19 · .NET / C# Documentation Quality 6.0 M2 · Repo Architecture documentation 5.0
The Ugly
D20 · .NET / C# ADR Quality 0.0

At a glance — Readiness · 33% · Weak · gated by D10, R4, P5 ·

The Good
D9 · .NET / C# Test Distribution 9.7 P1 · Repo CI/CD gates 8.5 P2 · Repo Observability 10.0 P4 · Repo Deployment & Rollback 8.0 P7 · Repo Outbound HTTP resilience 10.0 P8 · Repo Schema migrations 10.0 R5 · React / TS Dependency Freshness 8.4 R8 · React / TS Dependency Hygiene 8.5
The Bad
D13 · .NET / C# Secret Scanning 5.0 P6 · Repo Release Hygiene 5.0 R6 · React / TS Tooling 6.7
The Ugly
D10 · .NET / C# Test Quality 3.1 P3 · Repo Security & performance tooling 4.0 P5 · Repo DR & Backup 0.0 R4 · React / TS Test Coverage 0.5

At a glance — Security · 60% · Adequate · gated by D30, D36 ·

The Good
D29 · .NET / C# Static Analysis (SAST) 7.2 D32 · .NET / C# Data Compliance (PII/GDPR) 9.0 D43 · .NET / C# Malicious Dependencies 10.0 D44 · .NET / C# Platform End-of-Life 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0 X17 · Repo Uncapped recursion over a caller-supplied document 10.0 X24 · Repo Document value interpolated into markup unescaped 10.0
The Bad
D28 · .NET / C# Secrets (history) 5.0 D31 · .NET / C# IaC & Container Security 6.4 D40 · .NET / C# Network Egress Confinement 6.0 D41 · .NET / C# Kernel & Syscall Confinement 6.0
The Ugly
D30 · .NET / C# Dependency Vulnerabilities 0.0 D36 · .NET / C# Supply-chain Provenance & Signing 0.0

At a glance — Domain Modelling · 95% · Exemplary ·

The Good
DM10 · Repo One transaction, one aggregate 9.2 DM11 · Repo Constructible invalid state 8.8 DM12 · Repo Ambient inputs in the domain 10.0 DM4 · Repo Rich vs anemic model 10.0 DM5 · Repo Encapsulated state 10.0 DM6 · Repo Domain ↔ infrastructure boundary 10.0 DM7 · Repo Repository granularity 10.0 DM8 · Repo Value-object opportunities 10.0 DM9 · Repo Scattered domain decisions 10.0

At a glance — Accessibility · 35% · Weak · gated by AC1, AC4 ·

The Bad
AC2 · Repo Forms & labels 5.3 AC5 · Repo ARIA correctness 5.4 AC7 · Repo A11y enforcement 6.0
The Ugly
AC1 · Repo Text alternatives 1.0 AC3 · Repo Page structure 4.3 AC4 · Repo Keyboard semantics 3.5

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A03:2025 — Software Supply Chain Failures51High / Critical
A02:2025 — Security Misconfiguration33High / Critical
A05:2025 — Injection9High / Critical
A07:2025 — Authentication Failures7High / Critical
A01:2025 — Broken Access Control1Medium

Roadmap

Immediately resolve the leaked secret in REDACTED and address the fourteen test cases lacking assertions, prioritizing the actor, architecture, and movie controller tests. Enhance accessibility by adding appropriate text alternatives to all images, SVGs, and videos, while simultaneously codifying disaster recovery and backup procedures in infrastructure as code. Finally, expand test coverage to include the currently unreached production modules to ensure comprehensive validation of the codebase.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 1 Leaked secret finding(s) in Secret Scanning — start with REDACTED.+9.0 ptsLowSecret Scanning
Resolve the 14 No assertions finding(s) in Test Quality — start with ActorControllerTest.java (6), MyArchitectureTests.java (5), MovieControllerTest.java (3).+7.8 ptsMediumTest Quality
Resolve the 1 No assertions (empty test) finding(s) in Test Quality — start with MoviemanagerApplicationTests.java.+2.9 ptsLowTest Quality
Add a text alternative — alt on images (alt="" for purely decorative ones), a title or aria-label on meaningful svg, an aria-label or inner fallback content on canvas, and a captions <track> on video.+3.7 ptsMediumText alternatives
Codify backups + geo-recovery in IaC and document RTO/RPO and the restore procedure — a persistence guard alone is not disaster recovery.+3.3 ptsMediumDR & Backup
Add tests that import the unreached modules (directly or through their public entry).+3.0 ptsMediumTest Coverage
Make custom controls keyboard-operable (role + tabindex + key handler), drop positive tabindex, and give anchors a real href.+1.8 ptsMediumKeyboard semantics
Resolve the 1 No ADRs found finding(s) in ADR Quality.+0.8 ptsLowADR Quality

File quality

Per-file score 0–10 — a quality signature. Of 19 files carrying findings, judged against the Production bar: 21% slop · 53% mixed · 26% near-clean.

FileScoreBandWorst signal
REDACTED0.0SlopSecret Scanning: Leaked secret: REDACTED
REDACTED0.3SlopIaC & Container Security: High IaC: REDACTED
REDACTED0.6SlopStatic Analysis (SAST): High: REDACTED
REDACTED1.8SlopIaC & Container Security: High IaC: REDACTED
REDACTED5.1MixedIaC & Container Security: High IaC: REDACTED
backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java5.5MixedCode Duplication: Duplicated block (5 lines × 2)
REDACTED6.2MixedIaC & Container Security: Medium IaC: REDACTED
backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java6.3MixedCognitive Complexity: MovieService.importMovie (cognitive 17)
backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java7.1MixedTest Quality: No assertions: testGetActorSearchByIdFound
backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java7.1MixedTest Quality: No assertions: ruleControllerAnnotations
REDACTED7.2MixedStatic Analysis (SAST): High: REDACTED
backend/src/test/java/ch/xxx/moviemanager/adapter/controller/MovieControllerTest.java7.4MixedTest Quality: No assertions: movieSearchByIdFoundTest
backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java7.8MixedCode Duplication: Duplicated block (9 lines × 2)
REDACTED7.9MixedData Compliance (PII/GDPR): Medium: REDACTED
backend/src/test/java/ch/xxx/moviemanager/MoviemanagerApplicationTests.java8.0Near-cleanTest Quality: No assertions (empty test): contextLoads
backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java8.5Near-cleanCode Duplication: Duplicated block (5 lines × 4)
backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java8.5Near-cleanCode Duplication: Duplicated block (10 lines × 2)
frontend/src/angular/src/app/filter-actors/filter-actors.component.ts8.5Near-cleanChange Coupling: Change coupling: filter-actors.component.ts ↔ filter-movies.component.ts
backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaActorRepository.java8.5Near-cleanChange Coupling: Change coupling: JpaActorRepository.java ↔ JpaMovieRepository.java

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 62

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 104

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 34

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 13

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 90 of 93 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 93 dimensions across the health lenses
D1D2D3D4D5D6D9D10D13D15D17D19D20D21D26D28D29D30D31D32D35D36D40D41D43D44AC1AC2AC3AC4AC5AC7AX1AX10AX2AX3AX4AX6DM10DM11DM12DM4DM5DM6DM7DM8DM9IC1M1M2M3M4P1P2P3P4P5P6P7P8R1R10R2R3R4R5R6R7R8R9X1X12X13X14X15X16X17X18X19X20X21X22X23X24X25X26X27X28X29X3X30X4X5

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 179 of 200 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Watchdog duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivy · checkovSecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3 · 3.2.533✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurementLocal LLM◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a162b8-94a0-792c-8f3f-90a092eb5e5d.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D10 Test Quality — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. The 35 test(s) behind this row are the ones the code-model census could read, and this repository also carries at least 3 test source file(s) (.ts) that it cannot: it reads the test types the .java frontend declared, so a suite in any other language is invisible to it. Skipped tests, zero-assertion tests and the other quality signals on this row are UNMEASURED in that suite — their absence from the counts above is a gap in this analyzer's language coverage, not a finding that those tests are sound.
  • D12 Dependency Hygiene — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — 3 Maven/Gradle manifest(s) were read, stating a version for 10 dependency(ies) and leaving 25 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
  • D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (2 contributor(s) across 882 commit(s) sampled, automation and bot accounts excluded). One of them holds 100% of the history; the other 1 hold 0% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
  • D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict. For npm the surface is what a published package.json's entry points (exports, main, module, types) export, followed through the source; an entry that names build output the tree does not commit (dist/, build/) is not followed back to source, because only a tsconfig outDir/rootDir pair states that mapping and a bundler's input lives in executable configuration this engine does not evaluate.
  • D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
  • D34 Knowledge Freshness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. File-level freshness contradicts repo activity: 31 commits in the last 90 days, yet 30 of 38 significant files carry no living knowledge. Those two readings cannot both be true, so the per-file recency signal is treated as unreliable here and freshness is not scored for this run.
  • D41 Kernel & Syscall Confinement — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Helm/kafka/templates/kubTemplate.yaml:53, REDACTED:97, REDACTED:53, REDACTED:104, REDACTED:63, REDACTED:114, REDACTED:167 did not read as a pod spec (a templated manifest such as Helm's that is not YAML until rendered, or a workload whose pod spec this check does not locate), so the seccomp/AppArmor profile in force there was not judged and no row about them can appear on this card.
  • AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via REDACTED (REDACTED). docker build failed (exit 1) — DEPRECATED: The legacy builder is deprecated and will be removed in a future release. Install the buildx component to build images with BuildKit: https://docs.docker.com/go/bui…; runtime evidence skipped.
  • C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
  • C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
  • C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
  • C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
  • C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
  • ED5 Idempotency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check decides whether a handler's mutation is safe to re-run by recognising its persistence writes (a database save, a repository write, an event publish) and its guards. Those markers are .NET member names, so in this repository's language a write such as `repository.save(order)` is not recognised and a same-named call on an unrelated library type could be. The handlers were found; their idempotency was neither confirmed nor ruled out.
  • GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and this repository's Java is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • P1 CI/CD gates — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A CI pipeline exists and the word "test" appears, but no explicit test-runner invocation (your stack's test command, or a test job) was matched — so either the gate runs tests through a step this pass could not recognise, or "test" is incidental here (a path, "latest", a reporter). Which of the two it is cannot be settled from this dimension's evidence; the coverage dimensions report whether a suite exists at all. You can widen what we reach: name the test runner explicitly in the pipeline step (your stack's test command, or a job named for the suite) so the gate is unambiguous to a reader and to this pass.
  • S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
  • D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
  • D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
  • D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
  • D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
  • D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
  • D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
  • D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
  • D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
  • D32 Data Compliance (PII/GDPR): PII/GDPR signals are heuristic pattern matches in code — they flag likely handling concerns, not legal compliance, and cannot trace where data actually flows at runtime.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D40 Network Egress Confinement: Egress confinement is read from committed Kubernetes manifests — a policy applied out-of-band (cluster-default deny, a service mesh, or a cloud firewall/security group off-repo) is invisible, and a present NetworkPolicy is declared config, not proof the cluster admission-controller actually enforces it at runtime.
  • D41 Kernel & Syscall Confinement: Syscall/MAC confinement is read from committed manifests — a profile applied by a cluster-wide PodSecurity default or a mutating webhook off-repo isn't seen, and a declared seccomp/AppArmor profile is config presence, not proof the node's kernel actually loaded and enforced it.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a REDACTED (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
  • AC1 Text alternatives: Alt-text is detected structurally — the scan sees that an alternative EXISTS, not whether it meaningfully describes the image, and decorative-vs-missing is judged by attribute shape; runtime-injected images and a non-role=img decorative svg are out of scope. This is accessibility readiness, never a WCAG conformance claim.
  • AC2 Forms & labels: Label association is read from static markup — a label wired up at runtime (JS-set aria-labelledby, framework-injected ids) reads as missing, a present label says nothing about whether its text is correct. A known UI-library field component (e.g. a JSX <TextField>) is now checked conservatively — flagged only when it carries NO label/aria-label/aria-labelledby/id/name — but wrapper/context-labelled libraries (Chakra/Radix FormControl+FormLabel) aren't statically visible (possible false positive) and non-JSX lowercased components are still skipped. A click handler on a plain element is now asked for a name too (it is a control the author declared), but the subtree test that answers it is deliberately generous: any DYNAMIC text expression in the subtree counts as a name, so an icon chosen by a ternary ({cond ? <IconA/> : <IconB/>}) reads as named, and a glyph component from a library the icon-import list does not know still names its parent. A clean result is "no unlabelled control found", not a labelling proof.
  • AC3 Page structure: Page structure is read from the static markup tree — landmarks, headings and lang injected at runtime aren't seen, heading ORDER is checked structurally (not against the rendered visual hierarchy), and lang/title/main fire only on full documents, never partials, and the data-table check sees header-cell presence (a <th> exists), not whether each header correctly associates with its cells. Static readiness, not conformance.
  • AC4 Keyboard semantics: Keyboard semantics are inferred from markup attributes — interactivity wired purely in script, focus managed at runtime, and component-level handlers are invisible. A clean result means "no static keyboard-trap shape", not a keyboard-operability proof.
  • AC5 ARIA correctness: ARIA correctness is checked against the static role/attribute shape — roles/attributes set dynamically aren't seen, a valid role says nothing about whether it matches the element's real behaviour, and required-state checks are suppressed when a JSX spread could supply them. The two-branch toggle check (a control whose state is conveyed only by which of two mutually exclusive branches renders) reads CONDITIONALS THAT ARE ATTRIBUTES — Vue v-if/v-else/v-show and Alpine x-if/x-show — so the same toggle written as a Svelte {#if} block or a JSX ternary is control flow the markup model never projects as a branch and is not seen at all.
  • AC7 A11y enforcement: Enforcement is scored from in-repo config/CI evidence only — an a11y gate enforced in external tooling with no in-repo trace can't be credited, and a configured linter is presence, not proof the rules actually run or block a merge.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • DM4 Rich vs anemic model: Behaviour is detected as state mutation inside a method body — a method that enforces an invariant by validating-and-throwing without mutating reads as a query, and mutation delegated through an interface the scan can't resolve isn't credited; entities with zero public properties still drop out of the population. It detects that state changes, not whether the rule is correct.
  • DM6 Domain ↔ infrastructure boundary: Infrastructure reached through a hand-rolled wrapper, a domain-named facade, reflection, or a string-keyed service locator resolves to a non-infra type and isn't seen; the body scan is symbol resolution over syntax, not full dataflow. A clean result means "no resolved infra reference in a domain body", not a proof of purity.
  • M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
  • P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
  • P5 DR & Backup: Backup/restore and disaster-recovery readiness is judged from in-repo evidence — a config that exists is not a tested restore, so the absence of positive evidence is reported as "not evidenced", never scored as present.
  • P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cyclomatic complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d1_recommendation.md.

D2 · Cognitive Complexity9.8 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Prevented

1 method(s) exceeded the cognitive complexity threshold of 15; the worst was MovieService.importMovie at 17.

MovieService.importMovie (cognitive 17)backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:185

What to do

  1. Bring the 1 body over 15 down to 15 or less in Cognitive Complexity — start with MovieService.importMovie (cognitive 17). — Refactoring it lifts Cognitive Complexity from 9.8 to about 10.0/10.
  2. Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 god class(es) detected.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

D4 · Code Duplication9.6 / 10Stronggated by 7 serious findings✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Verified

7 duplicated block group(s) detected. Measured on part of this repository only: .ts (25% of production source) was not exposed to THIS dimension's token comparison and is not in this count; duplication there is measured by R10 Code Duplication, the frontend lens's card running the same clone algorithm over the JS/TS token stream.

Duplicated block (5 lines × 2) · ×3backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:162
Duplicated block (9 lines × 2)backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:77
Duplicated block (7 lines × 2)backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:94
Duplicated block (5 lines × 4)backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java:50
Duplicated block (10 lines × 2)backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:97

What to do

  1. Resolve the 3 Duplicated block (5 lines × 2) finding(s) in Code Duplication — start with ActorRepositoryBean.java (2), MovieService.java. — One of this dimension's main actionable groups (3 warning-level).
  2. Resolve the 1 Duplicated block (9 lines × 2) finding(s) in Code Duplication — start with DefaultMapper.java. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 Duplicated block (7 lines × 2) finding(s) in Code Duplication — start with DefaultMapper.java. — One of this dimension's main actionable groups (1 warning-level).
  4. Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

D5 · Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

3 production modules (Maven+npm), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 0 module(s) off the main sequence, with abstractness counted on 2 of the 3 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).

✓ On the Gold path — maintain.

Detailed fixes: d5_recommendation.md.

D6 · Cohesion (LCOM4)10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 16 classes have LCOM4 above 3.

✓ On the Gold path — maintain.

Detailed fixes: d6_recommendation.md.

D9 · Test Distribution9.7 / 10Exemplary✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.7 / 10 · rule-coverage 100% · ceiling Documented

38 test methods: 37 unit, 0 integration, 0 BDD, 1 e2e. The JavaScript/TypeScript suite contributes 3 `it`/`test` case(s) across 2 test file(s) declaring at least one beside 35 .NET test method(s); its tier split is read from package names and paths only.

✓ On the Gold path — maintain.

Detailed fixes: d9_recommendation.md.

D10 · Test Quality3.1 / 10Weak✓ Tool-verified

What it measures: Whether the tests truly assert behaviour rather than just running the code.

Method: Per-test assertions, skips, and mock references analyzed via Roslyn; structured skip-reason tags (BUG:/ENV:) separate documented deferrals from debt. Deterministic.

Maturity: Documented → Verified → Prevented · effective 3.1 / 10 · rule-coverage 100% · ceiling Prevented

0 skipped, 15 zero-assertion, no mocking-framework packages referenced (hand-written doubles or no mocking) across 35 tests. Measured on the .java suite only — at least 3 test source file(s) (.ts) went unread, so its test quality is unmeasured and is not in these counts.

No assertions (empty test): contextLoadsbackend/src/test/java/ch/xxx/moviemanager/MoviemanagerApplicationTests.java:25
No assertions: testGetActorSearchByIdFound · ×14backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:111

What to do

  1. Resolve the 14 No assertions finding(s) in Test Quality — start with ActorControllerTest.java (6), MyArchitectureTests.java (5), MovieControllerTest.java (3). — One of this dimension's main actionable groups (14 warning-level).
  2. Resolve the 1 No assertions (empty test) finding(s) in Test Quality — start with MoviemanagerApplicationTests.java. — One of this dimension's main actionable groups (1 issue-level).
  3. Enforce Test Quality in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d10_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · Secret Scanning5.0 / 10Adequate✓ Tool-verified

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.0 / 10 · rule-coverage 100% · ceiling Prevented

1 secret(s) detected.

REDACTED

What to do

  1. Resolve the 1 Leaked secret finding(s) in Secret Scanning — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  2. Enforce Secret Scanning in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d13_recommendation.md · top locations in Appendix A, every location in findings.md.

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

D17 · Explicit Debt10.0 / 10Exemplary○ Nothing flagged

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 deducted task-comment markers across 6901 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

✓ On the Gold path — maintain.

Detailed fixes: d17_recommendation.md.

D19 · Documentation QualityAdequate◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Adequate / 10 · rule-coverage 100% · ceiling Documented

The repository's root README is a well-written project overview that states MovieManager is an Angular/Spring Boot app managing movies with H2 and Postgresql databases, initialized via Liquibase, fulltext search using Hibernate Search, and links to articles. The frontend/src/angular/README documents the directory it belongs to (the angular subdirectory), which is accurate per its own heading; the root README's scope is broader but does not cover the package or its licence, so those are judged against the root.

What to do

  1. Improve Documentation Quality — currently 6.0/10. — The repository's root README is a well-written project overview that states MovieManager is an Angular/Spring Boot app managing movies with H2 and Postgresql databases, initialized via Liquibase, fulltext search using Hibernate Search, and links to articles. The frontend/src/angular/README documents the directory it belongs to (the angular subdirectory), which is accurate per its own heading; the root README's scope is broader but does not cover the package or its licence, so those are judged against the root.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 2 build units (Maven, npm) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

D28 · Secrets (history)5.0 / 10Adequate✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 5.0 / 10 · rule-coverage 100% · ceiling Documented

5 finding(s): 0 critical, 5 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

REDACTED
REDACTED

What to do

  1. Resolve the 5 High secret finding(s) in Secrets (history) — start with REDACTED (5). — One of this dimension's main actionable groups (5 issue-level).
  2. Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

D29 · Static Analysis (SAST)7.2 / 10Adequategated by 6 critical findings✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 7.2 / 10 · rule-coverage 100% · ceiling Documented

9 finding(s): 0 critical, 6 high, 3 medium, 0 low. 5 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 4 file(s) — `REDACTED`, `helm/minikubeSetup.sh` (line 6, line 17), `REDACTED`, `REDACTED` — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.

REDACTED
REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  2. Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
  3. No action in Static Analysis (SAST) — all 5 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (5 issue-level, 0 of them charged here).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities0.0 / 10Critical✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

45 finding(s): 3 critical, 22 high, 14 medium, 6 low.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 22 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (22). — One of this dimension's main actionable groups (22 issue-level).
  2. Resolve the 12 Medium CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (12). — One of this dimension's main actionable groups (12 warning-level).
  3. Resolve the 3 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

D31 · IaC & Container Security6.4 / 10Adequate✓ Tool-verified

What it measures: Whether Dockerfiles / Terraform / Kubernetes config follow security best practices.

Method: IaC/container misconfiguration scan via trivy config (REDACTED/Terraform/K8s/Helm/CloudFormation); severity rules to 0-10 moderate normalizer. NotApplicable without manifests. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 6.4 / 10 · rule-coverage 100% · ceiling Documented

33 finding(s): 0 critical, 4 high, 20 medium, 9 low.

REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 20 Medium IaC finding(s) in IaC & Container Security — start with REDACTED (19), REDACTED. — One of this dimension's main actionable groups (20 warning-level).
  2. Resolve the 4 High IaC finding(s) in IaC & Container Security — start with REDACTED (3), REDACTED. — One of this dimension's main actionable groups (4 issue-level).
  3. Resolve the 9 Low IaC finding(s) in IaC & Container Security — start with REDACTED (9). — One of this dimension's main actionable groups (9 recommendation-level).

Detailed fixes: d31_recommendation.md · top locations in Appendix A, every location in findings.md.

D32 · Data Compliance (PII/GDPR)9.0 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Likely personal-data (PII / GDPR) handling concerns — logging or storing data without safeguards.

Method: Heuristic PII/GDPR LEAK scan via semgrep across the repo, using Watchdog's own ruleset: personal data crossing a boundary it should not — reaching a log/console sink, a URL or query string, or unprotected browser storage. Matches map to severity and a 0-10 wide normalizer. A clean sweep is unscored rather than an unearned 10, and is a statement about the leak paths checked only — this dimension does not inventory the personal data a repository holds (the personal-data map and the C1-C5 compliance cards do that), so it never reports that a repository has no personal-data surface. Reported LOUDLY as a measurement gap if the ruleset is missing from the analyzer image. Exhaustive over the leak paths, advisory-leaning; degrades on parse failure.

Maturity: Documented → Verified → Prevented · effective 9.0 / 10 · rule-coverage 100% · ceiling Documented

1 finding(s): 0 critical, 0 high, 1 medium, 0 low.

REDACTED

What to do

  1. Resolve the 1 REDACTED finding(s) in Data Compliance (PII/GDPR) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d32_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling8.8 / 10Strong✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 8.8 / 10 · rule-coverage 100% · ceiling Documented

Strongest change-coupling: filter-actors.component.ts↔filter-movies.component.ts 85%; JpaActorRepository.java↔JpaMovieRepository.java 80%; ActorService.java↔MovieService.java 65%

Change coupling: filter-actors.component.ts ↔ filter-movies.component.ts · ×4frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:1
Change-coupling hub: MovieService.java → JpaActorRepository.java, JpaMovieRepository.java, MovieRepositoryBean.java, ActorService.javabackend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java

What to do

  1. Resolve the 4 Change coupling finding(s) in Change Coupling — start with ActorRepositoryBean.java (2), filter-actors.component.ts, JpaActorRepository.java. — One of this dimension's main actionable groups (4 warning-level).
  2. Resolve the 1 Change-coupling hub finding(s) in Change Coupling — start with MovieService.java. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

D36 · Supply-chain Provenance & Signing0.0 / 10Critical✓ Tool-verified

What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.

Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

0/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
  2. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.

D40 · Network Egress Confinement6.0 / 10Adequate✓ Tool-verified

What it measures: Whether Kubernetes workloads restrict network EGRESS with a NetworkPolicy (or Cilium policy), limiting where a compromised pod can send data or reach a command-and-control server. Presence of committed egress-restricting policy, not runtime enforcement.

Method: Deterministic YAML-manifest inspection (no external tool, no Roslyn — language-agnostic): Kubernetes workloads gate applicability; credits a NetworkPolicy / Cilium policy that restricts egress (policyTypes: [Egress] / egress rules). Reward-leaning (neutral floor climbing to 10, never a deduction — baseline misconfigs stay with D31). Deterministic.

Maturity: Documented → Verified → Prevented · effective 6.0 / 10 · rule-coverage 100% · ceiling Documented

0/2 network-egress controls present (network policy, egress restriction).

No network policy

What to do

  1. Resolve the 1 No network policy finding(s) in Network Egress Confinement. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d40_recommendation.md · top locations in Appendix A, every location in findings.md.

D41 · Kernel & Syscall Confinement6.0 / 10Adequate✓ Tool-verified

What it measures: Whether Kubernetes workloads confine the kernel boundary — a seccomp profile (RuntimeDefault/Localhost) plus an AppArmor/SELinux mandatory-access-control layer — shrinking the syscall attack surface a container escape would use. Presence of committed confinement config, not runtime enforcement.

Method: Deterministic YAML-manifest inspection (no external tool, no Roslyn): on Kubernetes workloads, credits a seccomp profile (RuntimeDefault/Localhost) and an AppArmor/SELinux MAC layer. Reward-leaning (neutral floor climbing to 10); NotApplicable without workloads. Deterministic.

Maturity: Documented → Verified → Prevented · effective 6.0 / 10 · rule-coverage 100% · ceiling Documented

No workload manifest could be read as a pod spec, so no confinement was judged.

What to do

  1. Improve Kernel & Syscall Confinement — currently 6.0/10. — No workload manifest could be read as a pod spec, so no confinement was judged.

Detailed fixes: d41_recommendation.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

D44 · Platform End-of-Life10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 2 platform declaration(s) and 14 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

✓ On the Gold path — maintain.

Detailed fixes: d44_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AC1 · Text alternatives1.0 / 10Critical✓ Tool-verified

Other · Accessibility — Whether non-text content carries a text alternative — img/area/input[type=image] have alt, a meaningful svg has a title or aria-label, video has a captions track, and object/embed/canvas have a name or fallback content. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: every img/area/input[type=image] checked for alt, svg[role=img] for a title/aria-label, video for a captions <track>. Components skipped, spreads suppressed. Deterministic, hard fact per element.

Coverage: Population: image/media elements — img, area, input[type=image], svg, video, object, embed, canvas — across the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and dynamic-attribute elements are skipped. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is NOT read by any producer, so it contributes no element to this population; where such a frontend is present the card discloses it as an analyzer gap rather than scoring around it.

  • An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative. (×3) — frontend/src/angular/src/app/filter-actors/filter-actors.component.html:263, frontend/src/angular/src/app/filter-movies/filter-movies.component.html:300, frontend/src/angular/src/app/movie-import/movie-import.component.html:50

What to do

  • Add a text alternative — alt on images (alt="" for purely decorative ones), a title or aria-label on meaningful svg, an aria-label or inner fallback content on canvas, and a captions <track> on video.
AC2 · Forms & labels5.3 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether form controls have a programmatic label (an associated label, aria-label or aria-labelledby), buttons have text, links have an accessible name, a click handler on a plain element names the control it declares, fieldsets have a non-empty legend, known UI-library field components carry a label prop, and a placeholder isn't used as the only label. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: inputs/selects/textareas checked for an associated label[for]/wrapping label/aria-label/aria-labelledby (per document), buttons for accessible text, fieldsets for a legend; placeholder-only labelling flagged. Deterministic, hard fact per control.

Coverage: Population: form controls, buttons, links, fieldsets and known UI-library field components in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and spread/dynamic-attribute elements are skipped, so a control whose label arrives through a spread or a runtime expression is deliberately not judged. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

  • A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one). (×4) — frontend/src/angular/src/app/filter-actors/filter-actors.component.html:35, frontend/src/angular/src/app/filter-actors/filter-actors.component.html:57, frontend/src/angular/src/app/filter-movies/filter-movies.component.html:35, …
  • This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label. (×6) — frontend/src/angular/src/app/filter-actors/filter-actors.component.html:126, frontend/src/angular/src/app/filter-actors/filter-actors.component.html:166, frontend/src/angular/src/app/filter-movies/filter-movies.component.html:203, …
  • This control has no associated label. Add a <label for> / wrapping <label> / aria-label / aria-labelledby so assistive tech can name it. — frontend/src/angular/src/app/filter-actors/filter-actors.component.html:204

What to do

  • Give every control a programmatic label (a <label for> / wrapping <label> / aria-label) and every button text — a placeholder is not a label.
AC3 · Page structure4.3 / 10Weak✓ Tool-verified

Other · Accessibility — Whether pages declare a language (well-formed BCP-47) and a non-empty title, expose exactly one main landmark and a sane heading order with non-empty headings, keep zoom enabled, title their iframes, give data tables header cells, and avoid meta-refresh. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: html lang, document <title>, a main landmark and heading order on full documents only, plus zoom-disabling viewports, untitled iframes and meta-refresh anywhere. Deterministic, per structural checkpoint.

Coverage: Population: the PARSED MARKUP documents (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx). The page-level checks — lang, title, single main landmark — fire ONCE PER FULL DOCUMENT (an <html> root) and never on a partial or component fragment, so a repo of fragments is assessed only on the per-element checks (heading order, table headers, iframe titles, meta-refresh, zoom). Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

  • The page declares no language, so assistive tech can't pick the right pronunciation. Add lang (e.g. lang="en"). (×2) — backend/src/main/resources/static/index.html:2, frontend/src/angular/base/index.html:2
  • A page with no <title> gives no name in the tab, history or screen-reader page list. Add a descriptive <title> in <head>. (×2) — backend/src/main/resources/static/index.html:2, frontend/src/angular/base/index.html:2
  • No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>. (×2) — backend/src/main/resources/static/index.html:2, frontend/src/angular/base/index.html:2

What to do

  • Declare <html lang>, a document <title> and a <main> landmark, keep headings in order, leave zoom enabled, title iframes and drop meta-refresh.
AC4 · Keyboard semantics3.5 / 10Weak✓ Tool-verified

Other · Accessibility — Whether interactive behaviour is keyboard-reachable — no click handler on a non-interactive element lacking a role, tabindex and key handler, no element the repo's own CSS styles `cursor: pointer` without giving it any of the three, no unfocusable element whose only binding is a mouse enter/leave pair or a double-click, no positive tabindex, no href-less anchor, no placeholder-href (#/javascript) link acting as a button. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: click handlers on non-interactive elements lacking role+tabindex+key handler, positive tabindex values, and href-less anchors. Components skipped, spreads suppressed. Deterministic, hard fact per element.

Coverage: Population: elements that pose a keyboard-semantics question, in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx) — a non-natively-interactive element carrying a click handler, a double-click or hover enter/leave binding, a pointer-only gesture on a tabindex="0" element, or `cursor: pointer` from the repo's own CSS; an href-less or placeholder-href (#, javascript:) anchor; and any element with a positive tabindex. Natively interactive elements used correctly (<button>, <a href>, form controls) are NOT in the population — there is nothing to judge — so a page of nothing but correct controls gives AC4 nothing to measure. Keyboard reachability is judged from the markup, never from a rendered page. ★ An interactive element declared in a tagged-template (html`…`) or hyperscript frontend is NOT in this population — no producer reads either — so an empty population is reported as an analyzer gap, never as "this repository has no interactive elements".

  • An <a> with no href, role or tabindex isn't focusable or keyboard-activatable. Give it a real href, or use a <button> for an action. — frontend/src/angular/src/app/search/search.component.html:117

What to do

  • Make custom controls keyboard-operable (role + tabindex + key handler), drop positive tabindex, and give anchors a real href.
AC5 · ARIA correctness5.4 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether ARIA is used correctly — valid non-abstract roles, the ARIA state a role requires, valid (non-misspelled) aria-* attribute names, in-enum values for token-typed aria-* attributes, and no aria-hidden on (or wrapping) a focusable element. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: role values checked against the WAI-ARIA role set (abstract/invalid flagged), required ARIA state for a role, and aria-hidden on a focusable element. Deterministic, role/attribute level.

Coverage: Population: elements in the PARSED MARKUP files (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx) that carry a role or an aria-* attribute; roles and token values are checked against the ARIA enums exhaustively within that set. An expression-valued (dynamic) role or aria-* value is skipped rather than guessed, and markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

  • aria-hidden="true" here hides the subtree from assistive tech, but a focusable descendant stays in the tab order — a keyboard user can land on a control screen readers can't see. Add inert, take the descendants out of the tab order (tabindex="-1"), or drop aria-hidden. — frontend/src/angular/src/app/login/login.component.html:1

What to do

  • Use valid, non-abstract roles, supply the ARIA state each role requires, and never put aria-hidden on a focusable element.
AC7 · A11y enforcement6.0 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether accessibility is ENFORCED in the toolchain — an accessibility checker configured over the markup (an a11y lint rule set, e.g. eslint-plugin-jsx-a11y or vuejs-accessibility where the project lints JavaScript) and an automated accessibility assertion wired into tests or CI (axe/pa11y/Lighthouse or an equivalent) — on the Documented→Verified→Prevented ladder.

Method: Repo config/CI scan: an accessibility checker configured over the markup (an a11y lint rule set such as eslint-plugin-jsx-a11y / vuejs-accessibility where JavaScript is linted) and an automated accessibility assertion in tests or CI (axe/pa11y/Lighthouse or equivalent), graded on the Documented→Verified→Prevented rungs. Deterministic, presence/rung detection.

Coverage: Population: the repository's own tooling configuration — lint config, test and CI files — NOT the markup. It is read for a configured accessibility checker and an automated accessibility assertion (axe/pa11y/Lighthouse, or a native-toolkit equivalent), and it credits an INVOCATION, never a mention: a licence filename, an import comment or a doc reference earns no rung. Enforcement configured entirely outside the repository leaves no evidence here and cannot be credited.

  • An a11y linter is configured (Documented) but there's no automated a11y test or CI gate. Add vitest-axe to verify at runtime, then gate it in CI. What was searched, so you can tell an absence from a miss: the 11 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.

What to do

  • Accessibility linting is already configured — assert with vitest-axe in tests, then gate axe/pa11y/Lighthouse in CI.
AX1 · Captive dependencies10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether any singleton service captures a scoped/transient dependency — a silent lifetime/threading bug.

Method: Roslyn scan: DI registrations parsed from AddSingleton/Scoped/Transient; each singleton checked for captured shorter-lifetime dependencies. Exhaustive, deterministic.

AX10 · Code composition7.2 / 10Strong✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

AX2 · Stateful singletons10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether singleton services avoid mutable shared instance state that concurrent callers would race on.

Method: Roslyn scan: singleton field mutations unguarded by lock or Interlocked, per type; syntax-based guard detection. Deterministic, traceable per field.

AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

AX6 · Interface segregation10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether interfaces stay focused rather than fat — the Interface-Segregation principle (SOLID 'I').

Method: Roslyn scan: public interface declared-member counts (accessors fold into their property/event); fat-interface threshold (over 15 declared members) flagged per type. Each finding also reports the distinct-OPERATION count — members counted by name, so an overload group counts once — which decides whether it states the caller-side ISP harm or the implementer-side burden of an overload set. TypeScript: exported interfaces that declare behaviour, counted over their REQUIRED operations (method signatures and function-typed properties with no `?`, once per signature) — data-shape interfaces and ambient .d.ts declarations are outside the population; JavaScript declares no interfaces and is not applicable. Deterministic, type-level.

DM10 · One transaction, one aggregate9.2 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether a single operation mutates more than one aggregate root. An aggregate is a consistency boundary, so saving two together fuses them into one — the second's invariants come to depend on the first's transaction, and the pair can no longer be separated. Reads of other aggregates are not counted.

Method: Neutral body surface (DDD-gated): every method body scanned for repository WRITE calls (Add/Update/Save/Remove/Delete/Insert/Store and their async forms), keyed on the ARGUMENT type rather than the repository type — three `IRepository<T>` writes collapse to one repository but are three distinct aggregates. Reads (Get/Find/Load/Query) are excluded, so loading another aggregate for context never counts. Score is offending methods over methods that write at all. Deterministic.

  • `MovieService.importMovie` saves `CastRepository`, `ActorRepository` in a single operation. Each is its own consistency boundary, so committing them together makes the second's invariants depend on the first's transaction, holds a lock across both for the whole operation, and means the pair can no longer be separated — into different services, or different databases. Mutate one aggregate here and let the others follow from a domain event. — backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:185

What to do

  • Mutate one aggregate per operation and let the others follow from a domain event — the second aggregate reaching consistency a moment later is the design, not a compromise.
DM11 · Constructible invalid state8.8 / 10Strong✓ Tool-verified

Other · Domain Modelling — Whether an aggregate can be constructed in a state its own rules forbid — a public constructor that takes a raw primitive, stores it, and validates nothing, with no factory beside it. A constructor taking only value objects is not counted: each parameter has already validated itself.

Method: Neutral surface (DDD-gated): each non-abstract entity/aggregate checked for a PUBLIC constructor taking at least one RAW PRIMITIVE parameter whose body contains no guard token (throw / Guard. / Ensure. / ArgumentException / CheckRule), on a type that also offers no static Create/Of/From/New factory. A constructor taking only value objects is never charged -- measured: 64 of 87 unguarded public constructors on the C# corpus take value objects only, so ignoring parameter types would be 73% false positives. One finding per entity. Deterministic.

  • `RevokedToken`'s public constructor takes `name`, `uuid` as raw primitives, and neither of the two things that would make that safe was found. What was searched, so you can tell an absence from a miss: for VALIDATION, the constructor body was scanned for `throw`, `Guard.`, `Ensure.`, `ArgumentNullException`, `ArgumentException`, `CheckRule` or `Requires.` — a guard reached through a helper method those tokens do not name is not seen; for a FACTORY, only this type's OWN static members were read, and only names beginning `Create`, `Of`, `From`, `New` or `Build` — one inherited from a base type, one on a companion builder, or one called `Parse`, `Make` or `Rehydrate` is not seen. If either exists, this row is wrong. If neither does, a caller can build a `RevokedToken` that breaks the rules it exists to enforce, and every rule downstream then has to cope with a state the model said was impossible. Guard in the constructor, take value objects that validate themselves, or make the constructor private behind a `Create` that can refuse. — backend/src/main/java/ch/xxx/moviemanager/domain/model/entity/RevokedToken.java:37

What to do

  • Give each aggregate one way in that can refuse — a guarded constructor, value-object parameters that validate themselves, or a private constructor behind a factory that returns a failure.
DM12 · Ambient inputs in the domain10.0 / 10Exemplary○ Nothing flagged

Other · Domain Modelling — Whether domain types receive the time and randomness their rules depend on, rather than reading the process clock or a global random source directly — an ambient read makes the rule it feeds untestable at the instant that matters and lets two reads inside one operation disagree.

Method: Roslyn (DDD-gated, C#/VB only): domain-layer types scanned for ambient reads — DateTime/DateTimeOffset.Now/UtcNow/Today, Random.Shared, new Random(), Stopwatch.GetTimestamp — resolved against the semantic model, with a comment/string-stripped token fallback only where resolution fails. Body reads are scored; field/property initialisers are surfaced unscored. Apply/When folds excluded (ES1 owns them). Deterministic, symbol-resolved.

DM4 · Rich vs anemic model10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether aggregates/entities carry the behaviour that protects their invariants, rather than being data bags driven by external services.

Method: Roslyn (DDD-gated): entity method BODIES classified mutator-vs-query — only methods that mutate the entity's own declared state count as invariant-protecting behaviour, so a getter/passthrough doesn't rescue an anemic class. Deterministic, exhaustive over domain-layer entities.

Coverage: Population: entities by name/base convention; rich-vs-anemic judged by classifying each method body mutator-vs-query — logic-bearing domain types outside the convention are invisible.

DM5 · Encapsulated state10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether entities protect their state — private/init-only setters, and collections handed out as read-only views rather than the mutable backing collection — instead of exposing writable state that bypasses invariants. Softened when a rehydration framework (Marten/EF) is present.

Method: Roslyn (DDD-gated): entities scanned for publicly writable state — public setters, and (C#/VB) own mutable collections handed out through an auto-property, a public field or a bare-field expression getter, where a computed/copying getter is never charged. One finding per entity; score softened when Marten/EF rehydration frameworks present. Deterministic, framework-aware.

Coverage: Population: entities by convention; encapsulation (setter shape) checked exhaustively within the set.

DM6 · Domain ↔ infrastructure boundary10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether the domain layer stays free of infrastructure dependencies (EF/Marten/HTTP/ASP.NET) — the clean-architecture dependency rule.

Method: Roslyn (DDD-gated): domain-layer types scanned for infrastructure usage in member SIGNATURES and inside method/accessor BODIES — resolved calls and object-creations into EF/Marten/HTTP/Mongo/Redis/message-bus types (not just a namespace allowlist). Deterministic, symbol-resolved, exhaustive over domain-layer bodies, DDD-native.

Coverage: Domain layer identified by NAMESPACE heuristic; infrastructure then resolved by symbol in member SIGNATURES and method/accessor BODIES — rename the layer and the check evaporates.

DM7 · Repository granularity10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether repositories are per aggregate root (not per child entity) and keep the persistence query handle behind the contract, so the root's invariants can't be bypassed.

Method: Roslyn (DDD-gated): repository abstraction detection; repositories over non-aggregate-root entities flagged, and (C#/VB) repository INTERFACES whose members return a live persistence query handle (IQueryable/DbSet/IMongoQueryable) — implementations and specification evaluators are out of population by design, since composing a query internally is what an implementation is for. Deterministic, DDD-native.

Coverage: Population: repositories + aggregate roots by NAME convention; per-root repository rule checked within the set.

DM8 · Value-object opportunities10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether clusters of primitives that travel together (a missing value object) are extracted — a low-weight suggestion, LLM-confirmed when configured.

Method: Roslyn (DDD-gated): primitive parameter clusters recurring three or more times across signatures extracted, then confirmed by language model when configured. Advisory, low-weight.

DM9 · Scattered domain decisions10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether one domain rule is decided — or one measurement produced — in more than one place, rather than living on the type that owns it.

Method: Neutral body surface plus Roslyn (DDD-gated), two arms. DECISION (Roslyn only): a predicate over a domain type's members judged in two or more types, where none of those decisions live on the owning type — operands of comparisons and relational property patterns only, so a member merely passed as an argument is not judged. DERIVATION: a plain all-numeric carrier of ≥2 members, with no base type and exactly one constructor, CONSTRUCTED as the result of a method (returned or assigned, never inline as an argument) in two or more types other than its own — the same measurement produced twice, which centralising the judgement does not fix. DERIVATION runs on every language whose frontend declares the produced-or-passed fact per construction (Roslyn and the Java sidecar today); a target with only the derivation arm carries an engine gap naming the decision arm as not assessed, and a frontend that declares nothing keeps the dimension not measured rather than clean. Single-member rules, test code and generated code are out of population for both. Advisory.

IC1 · Incompleteness & stubs10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Unfinished work detected by code SHAPE, not keywords, in this repository's Java: methods that only throw a "not implemented" exception, methods that take inputs and return a constant or do nothing, dead `if (false)` branches, and skeleton classes most of whose methods are holes.

Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.

M1 · Documentation (README)8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
  • Add a README to the 2 of 3 project(s) that lack one — worth up to 1.3 pts.
M2 · Architecture documentation5.0 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

P1 · CI/CD gates8.5 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

What to do

  • Run the test suite in CI via an explicit runner step for your stack, and gate merges on it.
P2 · Observability10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

P3 · Security & performance tooling4.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

  • Enable Dependabot/Renovate or a dependency-review gate.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback8.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

What to do

  • Add an approval/environment gate (required reviewers / protection rules) before production promotion.
P5 · DR & Backup0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether disaster recovery is planned and codified — backups, geo-recovery, RTO/RPO, persistence guarantees — from IaC + container manifests + docs, never the live cloud.

Method: Filesystem scan: disaster recovery, backup, geo-recovery, RTO/RPO, persistence guarantees from IaC, manifests, and docs. Exhaustive, deterministic, never a live environment.

  • A persistence guard (data volume / purge-protection) was found, but no backup, geo-recovery or RTO/RPO controls were evidenced — a volume that survives a container recreate is not a tested restore from catastrophic loss.

What to do

  • Codify backups + geo-recovery in IaC and document RTO/RPO and the restore procedure — a persistence guard alone is not disaster recovery.
P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

  • No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

  • Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
P7 · Outbound HTTP resilience10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether outbound HTTP calls are wrapped in resilience (retry/timeout/circuit-breaker) so a failing dependency doesn't cascade.

Method: Source scan: outbound HTTP clients and what bounds them — resilience handlers (Polly, AddStandardResilienceHandler) on .NET; on Go, the JVM, Python, JavaScript/TypeScript, Ruby, PHP, Rust, Elixir, Swift, Dart and Erlang, a timeout, deadline, retry or breaker beside each call, or a process-wide client default (a framework-wide deadline such as Drupal core's, Laravel's or actix's awc counts). Exhaustive, deterministic.

P8 · Schema migrations10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether database schema changes go through versioned migrations rather than being auto-created from the model at startup.

Method: Roslyn scan: EF Core DbContext for a versioned migrations directory versus bare EnsureCreated usage; off .NET, a file scan of dependency manifests, migration histories (Flyway, Liquibase, Alembic, Django, Rails, Prisma, TypeORM, Knex/Sequelize, golang-migrate, goose, Laravel, Doctrine, Diesel/sqlx) and schema auto-create in production source or config. Exhaustive, deterministic.

R1 · Type Safety10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.

Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.

R10 · Code Duplication8.9 / 10Strong✓ Tool-verified

React / JS · Code Health — Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm over JS/TS tokens, D-386): a block is reported only where its copies still agree on most of their own identifiers and literals, or were renamed as they were pasted but kept most of their constants, and where the copies carry enough code to stand on their own or the copied extent reaches 30 lines — so a re-implementation sharing neither names nor values, and a small pasted declaration, are both found and deliberately not reported, and a clean R10 is not a claim that nothing was copied.

Method: Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm run over JS/TS tokens). Masking finds the candidates; a block is reported when its copies still agree on most of their own identifiers and literals, or when a renamed copy still agrees on most of its constants, AND the copies carry enough code to stand on their own — or when the copied extent reaches 30 lines. So a re-implementation sharing neither names nor values, and a small pasted declaration, are deliberately not counted. Deterministic.

  • frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:123 · frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:109 — the two spans are one implementation copied and then locally edited — 657 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:123
  • frontend/src/angular/src/app/search/search.component.ts:66 · frontend/src/angular/src/app/search/search.component.ts:87 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — frontend/src/angular/src/app/search/search.component.ts:66
  • frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:86 · frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:98 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another. — frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:86
  • frontend/src/angular/src/app/services/actors.service.ts:38 · frontend/src/angular/src/app/services/movies.service.ts:69 · frontend/src/angular/src/app/services/movies.service.ts:96 — the 2 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it. — frontend/src/angular/src/app/services/actors.service.ts:38

What to do

  • Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R2 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.

Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.

  • hasActiveFilter has cyclomatic complexity 11 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:152
R3 · Large Files10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How many source files exceed the large-file threshold.

Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.

R4 · Test Coverage0.5 / 10Critical✓ Tool-verified

React / JS · Readiness — Static test reachability (D-386): the share of production files reachable from any test via the import graph — measured without running anything.

Method: Static test reachability: the share of production files reachable from any test via the import graph — measured without running anything. Deterministic.

  • No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one. (×20) — frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:1, frontend/src/angular/src/app/search/search.component.ts:1, frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:1, …

What to do

  • Add tests that import the unreached modules (directly or through their public entry).
R5 · Dependency Freshness8.4 / 10Strong✓ Tool-verified

React / JS · Readiness — How outdated the npm dependencies are (a maturity signal). JS/npm CVEs are scored separately in D30 (JS/npm Dependency Vulnerabilities).

Method: npm dependency staleness from manifest/registry metadata (a maturity signal; JS/npm CVEs are scored separately in D30, which answers dependency vulnerabilities for every ecosystem). Deterministic.

What to do

  • Bump outdated dependencies to current versions to limit upgrade debt.
R6 · Tooling6.7 / 10Adequate✓ Tool-verified

React / JS · Readiness — Whether the project wires up test, lint and typecheck — detected from each package.json script's COMMAND (eslint / tsc / vitest / jest / playwright), not just its name, and corroborated against CI-workflow invocations so a tool run only in CI still counts.

Method: package.json scanned for test/lint/typecheck script wiring. Deterministic presence check.

  • test ✓ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.

What to do

  • Add `tsc --noEmit` as package.json scripts and run them in CI.
R7 · Dead Code9.9 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Files unreachable from every application/tooling/test entry point, and exports nothing imports (module-graph reachability, D-386).

Method: Dead code: files unreachable from every application/tooling/test entry point plus exports nothing imports, via module-graph reachability. Deterministic, exhaustive over the import graph.

  • Nothing in its class reads or assigns this private field (for a constructor parameter property: it is stored and never read), and no string key or test reaches it by name. Remove it, or use it where it was meant to take effect. — frontend/src/angular/src/app/services/users.service.ts:28
R8 · Dependency Hygiene8.5 / 10Strong✓ Tool-verified

React / JS · Readiness — npm dependency truthfulness (D-386): unused dependencies, imports not declared anywhere, and type-/test-only packages shipped as production deps.

Method: npm dependency truthfulness: unused dependencies, imports declared nowhere, and type-/test-only packages shipped as production deps — from the manifest + import graph. Deterministic.

  • Declared in frontend/src/angular/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it. (×3)

What to do

  • Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
R9 · Circular Imports10.0 / 10Exemplary✓ Tool-verified

React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.

Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.

X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

X12 · Unreachable branch10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.

Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.

X13 · Undrained process stream10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.

Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

X16 · Unfloored truncation loop10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.

Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.

X17 · Uncapped recursion over a caller-supplied document10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a walk that recurses through a JSON/XML tree handed in by its caller bounds how deep it will go — an uncapped walk lets the document's nesting choose the stack depth, and the resulting StackOverflowException cannot be caught.

Method: Roslyn syntax + semantics: methods that take a JSON/XML document node and call themselves with a child of it, reachable from an externally-callable member of the same type that accepts a document, checked for any depth parameter, descent counter or threaded arithmetic anywhere in the walk. On a repository with no .NET source it reads TypeScript off the engine’s own token stream (test, vendored, generated and minified paths and `.d.ts` not) with the same rule: a function or method with a parameter typed as a document value — `unknown`, `any`, `object`, `Record<string, unknown|any>`, a JSON alias (`JsonValue`, `JSONObject`, …) or a DOM node global the file does not rebind — that calls itself (bare, or through `this` for a method, or hands itself to a call over the value as in `value.map(walk)`) with something it took out of that value and never through an ancestor accessor such as `closest()` or `parentElement`, that is exported or reached from an exported function (a public method of the same exported class) taking such a value, and that names no depth, level, nesting, recursion, remaining or budget anywhere and threads no `+`/`-` arithmetic through a self-call. Plain JavaScript is not read: with no annotation nothing tells a parsed document from a tree the code built itself. Deterministic, provable per finding. Advisory.

X18 · Disposal-pattern correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.

Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.

X19 · Unrestored process-global state10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that temporarily changes state belonging to the whole process — the working directory, an environment variable — puts it back on EVERY path: a restore reached only when nothing throws leaks the change to the rest of the process.

Method: Roslyn syntax + semantics: method bodies that write the process working directory or an environment variable and write it back in the same body, checked for whether that restore sits in a `finally`/`catch` or only on the straight-line path. On a repository with no .NET source the same rule reads production JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not): `process.chdir`, `process.env.NAME =`/`["NAME"] =` and `delete process.env.NAME`, and Deno’s `Deno.chdir`/`Deno.env.set`/`Deno.env.delete`, paired per function body (a nested function or arrow is its own body, and module top-level code is none), where the last write puts back a local the body captured from the same global or deletes a variable the first write set, with at least one statement between them; a write in a `catch`/`finally` of that body silences it. Deterministic, provable per finding. Advisory.

X20 · Mistyped argument guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether an argument guard throws the exception its own condition describes — a guard that rejects a value for being EMPTY and reports it as `NullPointerException` (Java, Kotlin, Scala), `ArgumentError.notNull` (Dart) or `ArgumentNullException` (F#'s `nullArg`) tells the caller a parameter was null when it provably was not.

Method: Roslyn syntax: `throw new ArgumentNullException(nameof(p))` statements controlled by an `if`, whose condition is read for a test that is true of a NON-null `p` — an emptiness test that dereferences it (`p.Count == 0`, `!p.Any()`) or a BCL predicate documented true of the empty value (`string.IsNullOrEmpty(p)`). Deterministic, provable per finding. Advisory.

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X22 · Contradicted release guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that TAKES a lock or semaphore and gives it back from a flag-guarded `finally` returns the value that flag implies — reporting success while the guard hands the primitive back admits a second caller the exclusion was there to keep out, and reporting failure while the guard keeps it leaves nothing to ever give it back.

Method: Roslyn syntax: `try` statements whose `finally` releases a synchronisation primitive under a bare local-bool guard, where the method also TOOK that same primitive before the `try`, checked for a `return` of a bool literal whose value disagrees with the flag state the method's own straight-line assignments put it in. Deterministic, provable per finding. Advisory.

X23 · Unguarded diagnostic materialisation10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the work a diagnostic log line costs is paid only when that line is wanted — C# evaluates a call's arguments BEFORE the call, so a trace/debug message joined or projected out of a collection is built in full on every pass, and then discarded by a sink the shipped configuration leaves switched off.

Method: Roslyn syntax: log calls at a diagnostic level (a `Log`-prefixed method naming Trace/Debug/Verbose, or a bare `Debug`/`Trace`/`Verbose` on a receiver named for a logger), whose argument list is read for a call whose cost scales with a sequence — a LINQ operator, a materialisation, `string.Join`, a serializer — with no enclosing level check or conditional-compilation region. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `debug`/`trace`/`verbose` call on a receiver named for a logger, or a `log`-prefixed method naming the level, whose argument calls an array operator (`map`/`filter`/`reduce`/`sort`/…), `Array.from`, `Object.keys/values/entries`, `JSON.stringify`/`util.inspect` over anything but a literal, or an array `join` — outside any arrow or function passed as an argument, which the logger calls only when the level is on — with no enclosing `if`, `&&` or `?:` whose condition names a level, a level string, or the `NODE_ENV`/`__DEV__`/`DEV` build switch. Deterministic, provable per finding. Advisory.

X24 · Document value interpolated into markup unescaped10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether text read out of the document being converted is escaped before it is written into generated markup — a value the document's author chose, interpolated into an attribute the surrounding literal delimits, can close that attribute and open another.

Method: Roslyn semantic model over the whole compilation: a string-typed `Value`/`InnerText`/`InnerXml`/`Text` member declared inside `DocumentFormat.OpenXml` or `System.Xml` is a taint SOURCE, propagated through assignments, returns, arguments, tuple elements and string composition to its transitive closure, then read at interpolated-string holes that sit in a markup position the surrounding literal itself delimits. Escaper/encoder calls and enclosing validator conditions cut the flow. Flow- and container-insensitive by construction. A second arm needs no provenance at all and reports a type that CONTRADICTS ITSELF — the same expression escaped at one delimited markup hole and interpolated raw at another hole in the same markup position of the same type, which the type's own escaping proves is a defect without knowing where the value came from. On a repository with no .NET source it reads JavaScript/TypeScript off the token stream with the same rule: a DOM read of raw document text (`getAttribute`, `textContent`, `innerText`, `nodeValue`) is the source, propagated through local bindings and string composition, and judged at template-literal and concatenation holes in the same two delimited markup positions; escapers and validating conditions cut it, and documentation-site, test, vendored and minified scripts are not read. Deterministic, provable per finding. Advisory.

X25 · Inert configuration knob10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.

Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.

X26 · Unsynchronised callback handoff10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value handed from a callback to the body that waits on it crosses on something built to be crossed — a `Queue<T>`/`List<T>`/`Dictionary<K,V>` written inside an event handler and read back outside it is mutated by two flows at once, and the semaphore or completion source beside it orders how MANY items exist while leaving the collection's own head, tail and backing array unprotected.

Method: Roslyn syntax: method, accessor, local-function and lambda bodies that declare BOTH a non-thread-safe generic collection (`Queue`/`Stack`/`List`/`Dictionary`/`HashSet`/`Sorted*`/`LinkedList`) and a synchronisation primitive (`SemaphoreSlim`/`TaskCompletionSource`/`ManualResetEvent(Slim)`/`AutoResetEvent`/`CountdownEvent`) as locals, then read for a `+=`-registered lambda that raises that primitive while the body outside every lambda waits on it — and, in that scope, a mutating call on the collection inside the lambda paired with a mention of it outside. Any `lock` in the scope abstains it. On a repository with no .NET source the same handoff is read in Java off the engine’s own token stream (test source sets, vendored and demonstration paths not): an `ArrayList`/`LinkedList`/`ArrayDeque`/`PriorityQueue`/`Hash*`/`LinkedHash*`/`Tree*` local and a `CountDownLatch`/`Semaphore`/`CompletableFuture` local, a lambda or anonymous class that raises the primitive and mutates the collection, and a wait outside it; any `synchronized` or `lock()` abstains the body. Because each of those primitives orders what the callback wrote before raising it, only a touch that provably overlaps the callback is convicted: one after the registration and before the next wait, or one in a loop registered-before, waiting on every pass and not declaring the collection. Deterministic, provable per finding. Advisory.

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether an enhanced `for` leaves the collection it is walking alone — a body that adds to or removes from the very collection the loop is iterating invalidates the fail-fast iterator it is holding, so the next `next()` throws `ConcurrentModificationException` and the remaining elements are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

X3 · Exception handling10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.

Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

X4 · Structured logging5.3 / 10Adequate✓ Tool-verified

Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.

Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.

  • `info` at line 61 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — backend/src/main/java/ch/xxx/moviemanager/adapter/config/CronJobConfiguration.java:61
  • `debug` at line 94 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.debug("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — backend/src/main/java/ch/xxx/moviemanager/adapter/controller/MovieController.java:94
  • `info` at line 64 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — backend/src/main/java/ch/xxx/moviemanager/adapter/events/KafkaConsumer.java:64
  • `info` at line 287 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — REDACTED:287
  • `info` at line 166 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:166
  • `info` at line 50 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text. — backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:50

What to do

  • Interpolated log message defeats structured logging
X5 · Nullable reference types1.4 / 10Critical✓ Tool-verified

Other · Code Health — Whether strict null checking is enabled and not undermined by heavy `!` assertion — TypeScript's `strictNullChecks` (which `strict` turns on) is what makes `string` exclude `null` and `undefined`, and the postfix `!` is the operator that silences it.

Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.

  • 0/3 of this repository's type-checking configuration(s) turn on strict null checking (`"strict": true`, or `"strictNullChecks": true`). A configuration that states neither is counted as OFF, because off is tsc's own default; a solution-style one whose `"files"` is empty and whose `"references"` point at other projects is in neither number, because it checks no source itself. Where it is off, `string` admits `null` and `undefined`: passing a value that is null compiles silently and throws on the first property access.
  • ~7.1 `!` null assertions per 1k TypeScript source lines — 13 assertion(s) across the 1836 source line(s) of the 27 TypeScript file(s) read, which is the only code the operator asserts anything in (a `!` in a `.js` file is not this operator and was not counted, and one in a file whose null checking is off silences nothing). Densest: frontend/src/angular/src/app/filter-actors/filter-actors.component.ts (6), frontend/src/angular/src/app/filter-movies/filter-movies.component.ts (6), frontend/src/angular/src/app/search/search.component.ts (1). Each one tells the compiler to trust the author about null, suppressing the very diagnostic `strictNullChecks` exists to produce.

What to do

  • The findings name the configuration each number was taken from and, for the assertions, the files that hold them. Turn null checking on where it is off — `"strict": true` in the base tsconfig that the others extend switches `strictNullChecks` on with the rest of the family — and then resolve the assertions rather than adding to them. A `!` on a value the checker could show to be null is a promise the author cannot check from where they are standing, and each one is a `TypeError: Cannot read properties of null` waiting for the path that makes it true; where the value genuinely cannot be null, say something the checker can see instead (narrow it with a test, make the property required, drop the `?`).

WCAG coverage — what static analysis assessed

Statically assessed 13 of 55 WCAG 2.2 Level A/AA success criteria (24%; ≈26% of the 50 WCAG 2.1 AA criteria for EN 301 549). The other 42 require runtime or manual evaluation. Partial signal only (a clean result is necessary, not sufficient; static analysis fully verifies none). This is accessibility readiness, not a conformance claim — a WCAG conformance claim requires manual evaluation (WCAG-EM 1.0).

DimensionWCAG 2.2 A/AA criteriaCoverage
AC1 · Text alternatives1.1.1, 1.2.2, 1.2.5Partial signal
AC2 · Forms & labels1.3.1, 3.3.2, 4.1.2Partial signal
AC3 · Page structure1.4.4, 2.2.1, 2.4.1, 2.4.2, 3.1.1, 4.1.2Partial signal
AC4 · Keyboard semantics2.1.1, 2.4.3Partial signal
AC5 · ARIA correctness4.1.2Partial signal
AC7 · A11y enforcementenforcement — no page criterionEnforcement posture (process)

Not statically assessed — these 42 Level A/AA criteria need runtime or manual evaluation (WCAG-EM): 1.2.1, 1.2.3, 1.2.4, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.4.1, 1.4.2, 1.4.3, 1.4.5, 1.4.10, 1.4.11, 1.4.12, 1.4.13, 2.1.2, 2.1.4, 2.2.2, 2.3.1, 2.4.4, 2.4.5, 2.4.6, 2.4.7, 2.4.11, 2.5.1, 2.5.2, 2.5.3, 2.5.4, 2.5.7, 2.5.8, 3.1.2, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 3.2.6, 3.3.1, 3.3.3, 3.3.4, 3.3.7, 3.3.8, 4.1.3.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health67%Adequate — gated by X5Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture91%ExemplarySolid.
Maturity76%StrongSolid.
Readiness33%Weak — gated by D10, R4, P5Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security60%Adequate — gated by D30, D36Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Domain Modelling95%ExemplaryStrongest area.
Accessibility35%Weak — gated by AC1, AC4Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Not evidenced — 3 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
Not included — 46 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC6 Visual & motion safety — No styled element found in the parsed markup — AC6 not applicable here.
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — no test/production split to check
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXR1 Runtime accessibility — docker build failed (exit 1) — DEPRECATED: The legacy builder is deprecated and will be removed in a future release. Install the buildx component to build images with BuildKit: https://docs.docker.com/go/bui…; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
  • C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • D11 Test Reliability — Test reliability NOT MEASURED: the JavaScript/TypeScript suite's dependency install refused the committed lockfile, so no test ever ran and flakiness could not be exercised — the dependency install for frontend/src/angular/ refused the committed lockfile (npm error code EUSAGE), so the suite never ran. It is excluded from the score rather than counted as a defect; a lockfile in sync with package.json is what lets the suite be re-run.
  • D12 Dependency Hygiene — Not scored — 3 Maven/Gradle manifest(s) were read, stating a version for 10 dependency(ies) and leaving 25 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
  • D14 License Compliance — Not scored — this repository's 10 declared JVM dependency coordinate(s) were read from its 3 Maven/Gradle manifest(s), but Maven Central could not be asked for the licence of 10 of them (HTTP 429 Too Many Requests from https://repo1.maven.org/maven2/org/hibernate/search/hibernate-search-mapper-orm/8.4.0.Final/hibernate-search-mapper-orm-8.4.0.Final.pom), and a licence verdict over part of a dependency graph is not a licence verdict. Nothing is asserted about this repository's licensing in either direction.
  • D16 Bus Factor — single-maintainer repository — bus factor is not applicable
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
  • D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — No inline comments to assess — comment value is not applicable here.
  • D25 ADR Conformance — no ADRs to check
  • D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.java), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D34 Knowledge Freshness — knowledge concentrated in recent work — freshness signal contradicted by repo activity
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
  • D42 Runtime Threat Enforcement — The repository ships application workloads but no cluster-governance resources (CRDs, admission webhooks, or a committed policy engine). Runtime threat-detection (Falco/Tetragon) and admission control (Kyverno/OPA-Gatekeeper/PodSecurity) are cluster-OPERATOR controls owned by the platform, not shipped by an application repo/chart — nothing for this repo to assess.
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • D8 Code Coverage — Coverage NOT MEASURED: the JavaScript/TypeScript half could not be measured — the dependency install for frontend/src/angular/ refused the committed lockfile (npm error code EUSAGE), so the suite never ran. Coverage is excluded from the score rather than counted as a near-zero. The named suite step is one the repository's maintainers can perform; once it passes, the real number is measured on the next scan. Alternatively, commit the lcov/Cobertura report your CI produces and it is read without a re-run.
  • DM1 Aggregate boundaries — no aggregates detected — aggregate-boundary check not applicable
  • DM2 Strongly-typed ids — no id-bearing domain types detected — strongly-typed-id adoption not assessable
  • DM3 Integration-event coupling — no integration events detected — coupling check not applicable
  • ED1 Event-Driven — not scored — this repository shows only 1 of the 3 signals this lens looks for (3 event handler(s))
  • ED5 Idempotency — Not assessed, and this one is on us: 3 command handler(s) or message consumer(s) were found here, but this check does not yet recognise persistence writes in this repository's language. Idempotency was neither confirmed nor ruled out — this is a limit of the analyzer, not a finding about your code.
  • ES1 Event Sourcing — not scored — this repository shows only 1 of the 3 signals this lens looks for (an Axon event-sourcing framework (@Aggregate/@CommandHandler/@EventSourcingHandler annotations))
  • GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
  • P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (JaCoCo XML — `mvn jacoco:report`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `@Benchmark` in a Java, Kotlin or Scala file importing JMH or kotlinx-benchmark, Jetpack Benchmark's `measureRepeated` in a file importing androidx.benchmark, or JMH/kotlinx-benchmark/androidx.benchmark in a pom.xml, Gradle or sbt build, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
  • PF2 Allocation hygiene — Not applicable: allocation awareness is rated where code engineers for it — at least 400 production lines that ship benchmarks or already use allocation-aware idioms (8 or more). This repository's Java code has 5,895 production line(s), 0 such use(s) and no benchmarks, so there is no allocation work to rate. The card is reward-only: its absence costs nothing.
  • PF3 Async & latency hygiene — Not applicable: this repository declares no async functions, so there is no asynchronous code for a blocking call to stall.
  • R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
  • S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X2 Cancellation propagation — no C# was loaded; this repository's Java was read, and no request in it can be cancelled by a caller — a Java request off Android takes no token: it is cancelled through the handle it returns (Future.cancel, Call.cancel, a Disposable), ambiently (io.grpc.Context) or by interrupting its thread, not through a parameter
  • X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 62 finding(s)
D30 · Dependency Vulnerabilities · High CVE · ×22
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
AC2 · Forms & labels · <input> without a programmatic label · ×6
  • <input> without a programmatic label frontend/src/angular/src/app/filter-actors/filter-actors.component.html:126 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
  • <input> without a programmatic label frontend/src/angular/src/app/filter-actors/filter-actors.component.html:166 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
  • <input> without a programmatic label frontend/src/angular/src/app/filter-movies/filter-movies.component.html:203 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
  • <input> without a programmatic label frontend/src/angular/src/app/login/login.component.html:27 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
  • <input> without a programmatic label frontend/src/angular/src/app/login/login.component.html:37 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
  • <input> without a programmatic label frontend/src/angular/src/app/login/login.component.html:47 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label for>, a wrapping <label>, or aria-label.
D28 · Secrets (history) · High secret · ×5
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
AC2 · Forms & labels · <button> with no accessible text · ×4
  • <button> with no accessible text frontend/src/angular/src/app/filter-actors/filter-actors.component.html:35 — A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one).
  • <button> with no accessible text frontend/src/angular/src/app/filter-actors/filter-actors.component.html:57 — A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one).
  • <button> with no accessible text frontend/src/angular/src/app/filter-movies/filter-movies.component.html:35 — A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one).
  • <button> with no accessible text frontend/src/angular/src/app/filter-movies/filter-movies.component.html:57 — A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one).
D31 · IaC & Container Security · High IaC · ×4
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
AC1 · Text alternatives · <img> without a text alternative · ×3
  • <img> without a text alternative frontend/src/angular/src/app/filter-actors/filter-actors.component.html:263 — An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
  • <img> without a text alternative frontend/src/angular/src/app/filter-movies/filter-movies.component.html:300 — An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
  • <img> without a text alternative frontend/src/angular/src/app/movie-import/movie-import.component.html:50 — An image with no alt (and no aria-label/aria-labelledby) is unreadable to assistive tech. Add alt — alt="" if it's purely decorative.
D30 · Dependency Vulnerabilities · Critical CVE · ×3
  • REDACTED
  • REDACTED
  • REDACTED
AC3 · Page structure · <html> without a lang · ×2
  • <html> without a lang backend/src/main/resources/static/index.html:2 — The page declares no language, so assistive tech can't pick the right pronunciation. Add lang (e.g. lang="en").
  • <html> without a lang frontend/src/angular/base/index.html:2 — The page declares no language, so assistive tech can't pick the right pronunciation. Add lang (e.g. lang="en").
AC3 · Page structure · Document without a <title> · ×2
  • Document without a <title> backend/src/main/resources/static/index.html:2 — A page with no <title> gives no name in the tab, history or screen-reader page list. Add a descriptive <title> in <head>.
  • Document without a <title> frontend/src/angular/base/index.html:2 — A page with no <title> gives no name in the tab, history or screen-reader page list. Add a descriptive <title> in <head>.
AC2 · Forms & labels · <textarea> without a programmatic label · ×1
  • <textarea> without a programmatic label frontend/src/angular/src/app/filter-actors/filter-actors.component.html:204 — This control has no associated label. Add a <label for> / wrapping <label> / aria-label / aria-labelledby so assistive tech can name it.
AC5 · ARIA correctness · aria-hidden hides a focusable element · ×1
  • aria-hidden hides a focusable element frontend/src/angular/src/app/login/login.component.html:1 — aria-hidden="true" here hides the subtree from assistive tech, but a focusable descendant stays in the tab order — a keyboard user can land on a control screen readers can't see. Add inert, take the descendants out of the tab order (tabindex="-1"), or drop aria-hidden.
D10 · Test Quality · No assertions (empty test) · ×1
  • No assertions (empty test): contextLoads backend/src/test/java/ch/xxx/moviemanager/MoviemanagerApplicationTests.java:25 — Test method has an empty body — it asserts nothing and exercises no code.
D11 · Test Reliability · Test suite cannot be installed from its own lockfile · ×1
  • Test suite cannot be installed from its own lockfile: frontend/src/angular/ — The vitest suite in frontend/src/angular/ was never exercised because its dependency install refused the committed lockfile — the dependency install for frontend/src/angular/ refused the committed lockfile (npm error code EUSAGE), so the suite never ran. The suite is declared and committed but cannot be installed from what the repository ships, so neither this scan nor a new contributor can run it. The ask is the one the owner performs: run the install locally and commit the lockfile it writes.
D13 · Secret Scanning · Leaked secret · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
Serious — 104 finding(s)
D31 · IaC & Container Security · Medium IaC · ×20
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
R4 · Test Coverage · No test reaches this file · ×20
  • No test reaches this file frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/search/search.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/login/login.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/services/movies.service.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/movie-import/movie-import.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/movies/movies.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/services/users.service.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/services/actors.service.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/actors/actors.component.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/app-routing.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/actor.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/movie-filter-criteria.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/actor-filter-criteria.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/main.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/common.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/search-string.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/user.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/search-term.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file frontend/src/angular/src/app/model/search-phrase.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
D10 · Test Quality · No assertions · ×14
  • No assertions: testGetActorSearchByIdFound backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:111 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: testGetActorSearchByIdNotFound backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:125 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: testGetActorSearchByName backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:97 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: testGetActorsByCriteria backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:148 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: testGetPagesByNumber backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:135 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: testPostSearchTerm backend/src/test/java/ch/xxx/moviemanager/adapter/controller/ActorControllerTest.java:164 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: movieSearchByIdFoundTest backend/src/test/java/ch/xxx/moviemanager/adapter/controller/MovieControllerTest.java:100 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: movieSearchByIdNotFoundTest backend/src/test/java/ch/xxx/moviemanager/adapter/controller/MovieControllerTest.java:113 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: movieSearchByNameTest backend/src/test/java/ch/xxx/moviemanager/adapter/controller/MovieControllerTest.java:80 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: ruleControllerAnnotations backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java:81 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: ruleCronJobMethodsAnnotations backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java:95 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: ruleExceptionsType backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java:88 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: ruleGeneralCodingRules backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java:110 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
  • No assertions: ruleGeneralCodingRulesLoggers backend/src/test/java/ch/xxx/moviemanager/architecture/MyArchitectureTests.java:104 — This method's body runs code, and no assertion call was recognised in it. Recognised by name: Assert*, *Should*/ShouldBe*, Verify, Expect, Throws, Record, Received/DidNotReceive, MustHaveHappened/MustNotHaveHappened, EnsureSuccessStatusCode and *AndEnsure* — so verification routed through a helper of your own naming, through a base-class or callback object whose members hold the assertions, or through a harness that fails by throwing under some other name, is not visible to this check and is not counted here. Read it as 'no assertion this check knows how to see', and if that is right, add one.
D30 · Dependency Vulnerabilities · Medium CVE · ×12
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D35 · Change Coupling · Change coupling · ×4
  • Change coupling: filter-actors.component.ts ↔ filter-movies.component.ts frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:1 — `frontend/src/angular/src/app/filter-actors/filter-actors.component.ts` and `frontend/src/angular/src/app/filter-movies/filter-movies.component.ts` change together 85% of the time (11 of the 13 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 11 shared commits counted here, the most recent 3 are `1888eb71` feat: use signals; `ccbbbe2b` feat: use signals; `ae9d28ff` feat: use signals — run `git show` on any of them.
  • Change coupling: JpaActorRepository.java ↔ JpaMovieRepository.java backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaActorRepository.java:1 — `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaActorRepository.java` and `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaMovieRepository.java` change together 80% of the time (8 of the 10 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets). They sit in the same directory, and in this ecosystem sibling files there normally share one namespace/package — so a direct reference between them needs no import and this pass cannot see whether one exists. Read the pair before acting: if one file only DECLARES what the other consumes (a constants/types file beside its user), the co-change is definitional and the question is whether the split earns its keep; if they duplicate structure, extract the common part into a shared function or type they both call; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `d09d7f17` fix: import; `0c7991a1` fix: performance; `554f5300` add limit (at that commit the files were still `src/main/java/ch/xxx/moviemanager/adapter/repository/JpaActorRepository.java` and `src/main/java/ch/xxx/moviemanager/adapter/repository/JpaMovieRepository.java`) — run `git show` on any of them.
  • Change coupling: ActorRepositoryBean.java ↔ MovieRepositoryBean.java backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:1 — `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java` and `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/MovieRepositoryBean.java` change together 50% of the time (8 of the 16 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets). They sit in the same directory, and in this ecosystem sibling files there normally share one namespace/package — so a direct reference between them needs no import and this pass cannot see whether one exists. Read the pair before acting: if one file only DECLARES what the other consumes (a constants/types file beside its user), the co-change is definitional and the question is whether the split earns its keep; if they duplicate structure, extract the common part into a shared function or type they both call; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `84349315` fix: cleanup; `8806f823` feat: add actor search; `9e69bb66` refactor: clean up — run `git show` on any of them.
  • Change coupling: ActorRepositoryBean.java ↔ ActorService.java backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:1 — `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java` and `backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java` change together 50% of the time (8 of the 16 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 8 shared commits counted here, the most recent 3 are `84349315` fix: cleanup; `d09d7f17` fix: import; `8806f823` feat: add actor search — run `git show` on any of them.
D4 · Code Duplication · Duplicated block (5 lines × 2) · ×3
  • Duplicated block (5 lines × 2) backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:162 — backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:162-166 | backend/src/main/java/ch/xxx/moviemanager/adapter/repository/MovieRepositoryBean.java:177-182 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:162` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
  • Duplicated block (5 lines × 2) backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:92 — backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:92-96 | REDACTED:93-97 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
  • Duplicated block (5 lines × 2) backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:140 — backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:140-144 | backend/src/main/java/ch/xxx/moviemanager/adapter/repository/MovieRepositoryBean.java:156-160 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/ActorRepositoryBean.java:140` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
AC3 · Page structure · Page without a main landmark · ×2
  • Page without a main landmark backend/src/main/resources/static/index.html:2 — No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>.
  • Page without a main landmark frontend/src/angular/base/index.html:2 — No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>.
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Medium vulnerability · ×2
  • REDACTED
  • REDACTED
AC4 · Keyboard semantics · Anchor without href · ×1
  • Anchor without href frontend/src/angular/src/app/search/search.component.html:117 — An <a> with no href, role or tabindex isn't focusable or keyboard-activatable. Give it a real href, or use a <button> for an action.
D11 · Test Reliability · Test reliability not measured · ×1
  • Test reliability not measured — JavaScript/TypeScript suite install refused the lockfile — Test reliability NOT MEASURED: the JavaScript/TypeScript suite's dependency install refused the committed lockfile, so no test ever ran and flakiness could not be exercised — the dependency install for frontend/src/angular/ refused the committed lockfile (npm error code EUSAGE), so the suite never ran. It is excluded from the score rather than counted as a defect; a lockfile in sync with package.json is what lets the suite be re-run.
D2 · Cognitive Complexity · MovieService.importMovie (cognitive 17) · ×1
  • MovieService.importMovie (cognitive 17) backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:185 — MovieService.importMovie has cognitive complexity 17 (threshold 15). Drivers by points: if/else 6 (12 pts), loops 2 (4 pts), boolean chains 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D32 · Data Compliance (PII/GDPR) · REDACTED · ×1
  • REDACTED
D35 · Change Coupling · Change-coupling hub · ×1
  • Change-coupling hub: MovieService.java → JpaActorRepository.java, JpaMovieRepository.java, MovieRepositoryBean.java, ActorService.java backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java — `backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java` changes together with 4 other files — `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaActorRepository.java`, `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/JpaMovieRepository.java`, `backend/src/main/java/ch/xxx/moviemanager/adapter/repository/MovieRepositoryBean.java`, `backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java` — none of which declares a dependency on it: one file is the hub of 4 separate couplings, not 4 unrelated pairs. Read the hub first: if the others each duplicate a part of what it does, the shared concern belongs in ONE unit and extracting it clears every edge at once; if the hub is a registry, dispatcher or barrel that must name each of them, the coupling is structural and the question is whether that list can be discovered instead of enumerated. Fixing the hub is one change; breaking the couplings one pair at a time is 4.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing REDACTED · ×1
  • REDACTED
D4 · Code Duplication · Duplicated block (9 lines × 2) · ×1
  • Duplicated block (9 lines × 2) backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:77 — backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:77-85 | backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:115-123 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:87` calls `getGeneres`, `forEach`, `getMyGenere` and `backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:124` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (7 lines × 2) · ×1
  • Duplicated block (7 lines × 2) backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:94 — backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:94-100 | backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:138-144 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:101` calls `setId`, `getId`, `setActorId` and `backend/src/main/java/ch/xxx/moviemanager/usecase/mapper/DefaultMapper.java:145` does not — after which the two agree again for 2 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.
D4 · Code Duplication · Duplicated block (5 lines × 4) · ×1
  • Duplicated block (5 lines × 4) backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java:50 — backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java:50-54 | backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java:84-88 | backend/src/main/java/ch/xxx/moviemanager/adapter/controller/MovieController.java:79-83 | backend/src/main/java/ch/xxx/moviemanager/adapter/controller/MovieController.java:109-113 — there are 4 copies across 2 file(s) — more copies than files, so at least one file holds the block twice. Extract it once into a single shared function every call site can reach and call it from all 4 sites; resolving a subset leaves the remainder to drift apart. Read the line range as the matched WINDOW rather than a finished unit: at `backend/src/main/java/ch/xxx/moviemanager/adapter/controller/ActorController.java:50` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. The `return` at the foot of the matched lines is the enclosing body's own terminal exit, not an early one: it moves with them unchanged, and each site calls the extracted unit from the position that `return` occupied — no decision has to be handed back and re-acted on.
D4 · Code Duplication · Duplicated block (10 lines × 2) · ×1
  • Duplicated block (10 lines × 2) backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:97 — backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:97-106 | backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:288-297 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once. Read the line range as the matched WINDOW rather than a finished unit: at `backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:97` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
D8 · Code Coverage · Coverage not measured · ×1
  • Coverage not measured — JavaScript/TypeScript suite — Coverage NOT MEASURED: the JavaScript/TypeScript half could not be measured — the dependency install for frontend/src/angular/ refused the committed lockfile (npm error code EUSAGE), so the suite never ran. Coverage is excluded from the score rather than counted as a near-zero. The named suite step is one the repository's maintainers can perform; once it passes, the real number is measured on the next scan. Alternatively, commit the lcov/Cobertura report your CI produces and it is read without a re-run.
DM10 · One transaction, one aggregate · One operation mutates 2 aggregates · ×1
  • One operation mutates 2 aggregates: MovieService.importMovie backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:185 — `MovieService.importMovie` saves `CastRepository`, `ActorRepository` in a single operation. Each is its own consistency boundary, so committing them together makes the second's invariants depend on the first's transaction, holds a lock across both for the whole operation, and means the pair can no longer be separated — into different services, or different databases. Mutate one aggregate here and let the others follow from a domain event.
DM11 · Constructible invalid state · Constructible in an invalid state · ×1
  • Constructible in an invalid state: RevokedToken backend/src/main/java/ch/xxx/moviemanager/domain/model/entity/RevokedToken.java:37 — `RevokedToken`'s public constructor takes `name`, `uuid` as raw primitives, and neither of the two things that would make that safe was found. What was searched, so you can tell an absence from a miss: for VALIDATION, the constructor body was scanned for `throw`, `Guard.`, `Ensure.`, `ArgumentNullException`, `ArgumentException`, `CheckRule` or `Requires.` — a guard reached through a helper method those tokens do not name is not seen; for a FACTORY, only this type's OWN static members were read, and only names beginning `Create`, `Of`, `From`, `New` or `Build` — one inherited from a base type, one on a companion builder, or one called `Parse`, `Make` or `Rehydrate` is not seen. If either exists, this row is wrong. If neither does, a caller can build a `RevokedToken` that breaks the rules it exists to enforce, and every rule downstream then has to cope with a state the model said was impossible. Guard in the constructor, take value objects that validate themselves, or make the constructor private behind a `Create` that can refuse.
P5 · DR & Backup · No DR/backup evidence · ×1
  • No DR/backup evidence — A persistence guard (data volume / purge-protection) was found, but no backup, geo-recovery or RTO/RPO controls were evidenced — a volume that survives a container recreate is not a tested restore from catastrophic loss.
R10 · Code Duplication · Duplicated block with local edits (92 matched lines × 2 locations) · ×1
  • Duplicated block with local edits (92 matched lines × 2 locations) frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:123 — frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:123 · frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:109 — the two spans are one implementation copied and then locally edited — 657 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication · Duplicated block (21 lines × 2 locations) · ×1
  • Duplicated block (21 lines × 2 locations) frontend/src/angular/src/app/search/search.component.ts:66 — frontend/src/angular/src/app/search/search.component.ts:66 · frontend/src/angular/src/app/search/search.component.ts:87 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R10 · Code Duplication · Duplicated block (13 lines × 2 locations) · ×1
  • Duplicated block (13 lines × 2 locations) frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:86 — frontend/src/angular/src/app/filter-actors/filter-actors.component.ts:86 · frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:98 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another.
R10 · Code Duplication · Duplicated block (13 lines × 3 locations) · ×1
  • Duplicated block (13 lines × 3 locations) frontend/src/angular/src/app/services/actors.service.ts:38 — frontend/src/angular/src/app/services/actors.service.ts:38 · frontend/src/angular/src/app/services/movies.service.ts:69 · frontend/src/angular/src/app/services/movies.service.ts:96 — the 2 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it.
R2 · Cyclomatic Complexity · Complex function hasActiveFilter (cyclomatic 11, cognitive 10) · ×1
  • Complex function hasActiveFilter (cyclomatic 11, cognitive 10) frontend/src/angular/src/app/filter-movies/filter-movies.component.ts:152 — hasActiveFilter has cyclomatic complexity 11 and cognitive complexity 10; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
R6 · Tooling · No typecheck script · ×1
  • No typecheck script — test ✓ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
R8 · Dependency Hygiene · Unused dependency '@angular-eslint/schematics' · ×1
  • Unused dependency '@angular-eslint/schematics' — Declared in frontend/src/angular/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
R8 · Dependency Hygiene · Unused dependency '@angular/language-service' · ×1
  • Unused dependency '@angular/language-service' — Declared in frontend/src/angular/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
R8 · Dependency Hygiene · Unused dependency 'npm-run-all' · ×1
  • Unused dependency 'npm-run-all' — Declared in frontend/src/angular/package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
Minor — 34 finding(s)
D31 · IaC & Container Security · Low IaC · ×9
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
X4 · Structured logging · Interpolated log message defeats structured logging · ×6
  • Interpolated log message defeats structured logging backend/src/main/java/ch/xxx/moviemanager/adapter/config/CronJobConfiguration.java:61 — `info` at line 61 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
  • Interpolated log message defeats structured logging backend/src/main/java/ch/xxx/moviemanager/adapter/controller/MovieController.java:94 — `debug` at line 94 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.debug("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
  • Interpolated log message defeats structured logging backend/src/main/java/ch/xxx/moviemanager/adapter/events/KafkaConsumer.java:64 — `info` at line 64 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
  • Interpolated log message defeats structured logging REDACTED:287 — `info` at line 287 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
  • Interpolated log message defeats structured logging backend/src/main/java/ch/xxx/moviemanager/usecase/service/MovieService.java:166 — `info` at line 166 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
  • Interpolated log message defeats structured logging backend/src/main/java/ch/xxx/moviemanager/usecase/service/ActorService.java:50 — `info` at line 50 is handed a message assembled at the call — a string concatenated with a value, or `String.format` — through SLF4J or log4j 2, so the logger receives one finished string: the values in it cannot be queried, filtered or aggregated as fields, every occurrence reads as a different message, and the string is built even when the level is filtered out. Pass a constant pattern and the values beside it instead: `log.info("Order {} moved to {}", orderId, status)`, which keeps the pattern and its arguments apart on the event for a structured encoder (logstash-logback-encoder, log4j 2's JsonTemplateLayout, OpenTelemetry), or `log.atInfo().addKeyValue("order_id", orderId).log("order moved")` with SLF4J 2's fluent API. An exception goes last, as the throwable argument, not into the text.
D30 · Dependency Vulnerabilities · Low vulnerability · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Low CVE · ×3
  • REDACTED
  • REDACTED
  • REDACTED
AC7 · A11y enforcement · Accessibility enforcement below the top rung · ×1
  • Accessibility enforcement below the top rung — An a11y linter is configured (Documented) but there's no automated a11y test or CI gate. Add vitest-axe to verify at runtime, then gate it in CI. What was searched, so you can tell an absence from a miss: the 11 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.
D28 · Secrets (history) · Rotate the exposed credentials · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D40 · Network Egress Confinement · No network policy · ×1
  • No network policy — No Kubernetes NetworkPolicy (or Cilium policy) found. Without one, every pod can talk to every other pod and reach out to the internet by default. Add a default-deny policy and open only the flows you need.
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
P6 · Release Hygiene · No changelog · ×1
  • No changelog — No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
R7 · Dead Code · Unused private field 'router' · ×1
  • Unused private field 'router' frontend/src/angular/src/app/services/users.service.ts:28 — Nothing in its class reads or assigns this private field (for a constructor parameter property: it is stored and never read), and no string key or test reaches it by name. Remove it, or use it where it was meant to take effect.
X5 · Nullable reference types · Strict null checking is not enabled everywhere the repository type-checks · ×1
  • Strict null checking is not enabled everywhere the repository type-checks — 0/3 of this repository's type-checking configuration(s) turn on strict null checking (`"strict": true`, or `"strictNullChecks": true`). A configuration that states neither is counted as OFF, because off is tsc's own default; a solution-style one whose `"files"` is empty and whose `"references"` point at other projects is in neither number, because it checks no source itself. Where it is off, `string` admits `null` and `undefined`: passing a value that is null compiles silently and throws on the first property access.
X5 · Nullable reference types · Null assertions (`!`) reduce the strict null checking score · ×1
  • Null assertions (`!`) reduce the strict null checking score — ~7.1 `!` null assertions per 1k TypeScript source lines — 13 assertion(s) across the 1836 source line(s) of the 27 TypeScript file(s) read, which is the only code the operator asserts anything in (a `!` in a `.js` file is not this operator and was not counted, and one in a file whose null checking is off silences nothing). Densest: frontend/src/angular/src/app/filter-actors/filter-actors.component.ts (6), frontend/src/angular/src/app/filter-movies/filter-movies.component.ts (6), frontend/src/angular/src/app/search/search.component.ts (1). Each one tells the compiler to trust the author about null, suppressing the very diagnostic `strictNullChecks` exists to produce.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-a754d50406114ea9943b917bfc8ad1c8/history.json --exit-code 0 --source .0artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-a754d50406114ea9943b917bfc8ad1c8/tree.json --exit-code 0 --source .0artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .9artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update45artifacts/raw/trivy-fs.json
D31 · IaC & Container Securitytrivy—trivy config --format json --quiet .33artifacts/raw/trivy-config.json
D32 · Data Compliance (PII/GDPR)semgrep—semgrep --config /opt/semgrep-rules/gdpr.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .1artifacts/raw/semgrep-gdpr.json
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — The repository ships application workloads but no cluster-governance resources (CRDs, admission webhooks, or a committed policy engine). Runtime threat-detection (Falco/Tetragon) and admission control (Kyverno/OPA-Gatekeeper/PodSecurity) are cluster-OPERATOR controls owned by the platform, not shipped by an application repo/chart — nothing for this repo to assess.0—
D43 · Malicious Dependenciestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update0artifacts/raw/trivy-fs.json

Run 01a162b8-94a0-792c-8f3f-90a092eb5e5d · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 62 · Warnings: 104 · Recommendations: 34 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 22-10-2026 @ 08:27 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md