akka-cqrs-activator — Watchdog Audit

Executive summary

Read through the Production lens — the standard calibration. *Green* means good enough to run in production. The score is absolute and comparable across repos.

BranislavLazic/akka-cqrs-activator carries serious gaps (39%). Several issues below can materially affect correctness, security, or the cost of changing it — and propagate to everything that depends on it.

Most urgent: a critical security exposure was detected (see the Security & Compliance lens). Treat it as a priority regardless of the overall grade.

The area that most needs attention is Readiness (24%) — releases are harder to depend on — versioning, release notes and dependency hygiene are thin, so consumers can't easily tell what changed or trust an upgrade. Maturity (33%) is the next concern — onboarding is slow — key decisions and the architecture aren't written down, so contributors have to reverse-engineer the intent.

Leadership focus, highest impact first: CI workflow that builds and runs the test suite on every push/PR (CI/CD gates); eslint and type checking (adopt TypeScript (Tooling); `healthcheck:` to the served compose service — probing… (Deployment & Rollback).

For scale: Hobby (~1,013 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

Code Health 69% Adequate · gated by R1 Architecture 69% Adequate Maturity 33% Weak · gated by D34, M2 Readiness 24% ⚠ Critical · gated by R6, P1, P3 Security 72% Adequate · gated by D38

How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.

Readiness 24% · 47% weightMaturity 33% · 26% weightArchitecture 69% · 14% weightCode Health 69% · 8% weightSecurity 72% · 4% weight

Raise Readiness 24 → 70 (the Healthy floor) ⇒ headline 39 → ~52.

Code composition — where the lines go

Tests 100%

New since the last scan (12+)

12 finding(s) are new versus the previous scan (2026-07-30) — surfaced by this scheduled scan itself, no pull request required.

D38 · Critical CVE: [GHSA redacted] ui/yarn.lock
D38 · Critical CVE: [GHSA redacted] ui/yarn.lock
D38 · Critical CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock
D38 · High CVE: [GHSA redacted] ui/yarn.lock

A full-fidelity diff against the previous run's complete recorded findings — line-move tolerant: a finding that only shifted line counts as unchanged, only genuinely new titles/files surface here.

Rebuild cost & value ~ Modeled — €390–€1,900

Cost to rebuild	€390–€1,900 (0.1 person-years (6–20 h), ~1 engineer)
Domain complexity	Standard — harder problems cost more per line
Quality factor	0.7× (at 39% quality) — the last 20% of quality is most of the work
Size & shape	Hobby · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)
Dead frontend code	~1 LoC unreachable (1 file(s)) — that slice of this estimate buys code with zero runtime value; deleting it is the cheapest win in this report (the R7 card lists every file)

This codebase represents roughly ~0.1 person-years of build effort (about ~€1,200 to rebuild). Its weakest lens is Readiness at 24% — the part of that asset most exposed by the findings below.

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.0) — standard service × a 0.7× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness.

+10.9 pts · Low effort · Knowledge Freshness

Add a CI workflow that builds and runs the test suite on every push/PR.

+15.0 pts · Medium effort · CI/CD gates

Add eslint and type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.

+14.6 pts · Medium effort · Tooling

Diagnosis — what's actually going on

Highest-leverage move · Medium · Leverage

Of everything flagged, the best return on effort is: Add a CI workflow that builds and runs the test suite on every push/PR. The rest can wait behind it.

Evidence: priority ranking: top of 5 ranked by impact/effort

→ Add a CI workflow that builds and runs the test suite on every push/PR.

Architecture — module dependency matrix

11 modules, 5 dependencies — every dependency points down the layering, so there are no cycles. Rows and columns are the same modules, ordered so that a module only depends on ones above it. A cell means the row depends on the column, and its number is how many type pairs create that dependency. Read one thing: is anything above the diagonal? A mark there is a dependency cycle. (A cycle is all this shows — an unusual but cycle-free dependency sits below the diagonal like any other.)

At a glance — Code Health · 69% · Adequate · gated by R1

The Good

D3 · Scala God Classes 10.0 D4 · Scala Code Duplication 10.0 R10 · React / TS Code Duplication 10.0 R2 · React / TS Cyclomatic Complexity 10.0 R3 · React / TS Large Files 10.0 R7 · React / TS Dead Code 10.0

The Ugly

R1 · React / TS Type Safety 0.0

At a glance — Architecture · 69% · Adequate

The Good

D35 · Scala Change Coupling 10.0 R9 · React / TS Circular Imports 10.0

At a glance — Maturity · 33% · Weak · gated by D34, M2

The Good

D19 · Scala Documentation Quality 7.0 D21 · Scala Naming Consistency 10.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 7.5

The Bad

M1 · Repo Documentation (README) 6.7

The Ugly

D34 · Scala Knowledge Freshness 0.0 M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 24% · Critical · gated by R6, P1, P3

The Good

D13 · Scala Secret Scanning 10.0

The Bad

P4 · Repo Deployment & Rollback 5.0 R8 · React / TS Dependency Hygiene 5.0

The Ugly

P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0 R6 · React / TS Tooling 3.4

At a glance — Security · 72% · Adequate · gated by D38

The Good

D28 · Scala Secrets (history) 9.0 D29 · Scala Static Analysis (SAST) 10.0 D33 · Scala JS/npm Dependency Vulnerabilities 10.0

The Ugly

D38 · Scala OSV Dependency Vulnerabilities 0.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP category	Findings	Severity
A06:2021 — Vulnerable & Outdated Components	50	High / Critical
A02:2021 — Cryptographic Failures	2	High / Critical

Roadmap

First, establish a continuous integration workflow to build and test every change. Next, enforce code quality by adding linting and type checking to the build process. Then, improve deployment reliability by adding health checks and ensuring immutable image tags for easy rollbacks. After that, clean up the project by removing unused dependencies and explicitly declaring all imports. Finally, resolve orphaned files to keep the codebase organized.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness.	+10.9 pts	Low	Knowledge Freshness
Add a CI workflow that builds and runs the test suite on every push/PR.	+15.0 pts	Medium	CI/CD gates
Add eslint and type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.	+14.6 pts	Medium	Tooling
Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.	+13.9 pts	Medium	Deployment & Rollback
Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.	+13.9 pts	Medium	Dependency Hygiene
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).	+10.9 pts	Medium	Architecture documentation
Add a 'Testing' section to the root README — how to run the test suite.	+8.6 pts	Medium	Documentation (README)
Reconcile the README with reality: README claims Akka HTTP but no Akka HTTP actor or routes exist.	+6.5 pts	Medium	Documentation accuracy

File quality

Per-file score 0–10 — a quality signature. Of 2 files carrying findings, judged against the Production bar: 0% slop · 100% mixed · 0% near-clean.

File	Score	Band	Worst signal
ui/yarn.lock	4.4	Mixed	OSV Dependency Vulnerabilities: Critical CVE: [GHSA redacted]
src/main/resources/application.conf	7.2	Mixed	Secrets (history): Secret: generic-api-key

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 24 of 26 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 2 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.4 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 26 dimensions across the health lenses

D3D4D13D19D21D28D29D33D34D35D38M1M2M3M4P1P3P4R1R10R2R3R6R7R8R9

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 51 of 59 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
jscpd	Code duplication	—	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.302	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.302	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019fca6b-45f0-7f8a-96ad-6fb6c0a93f6a.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D30 Dependency Vulnerabilities — scanner not present in this environment — The backing tool was not installed where this scan ran, so this dimension was not scored. Install the tool (or run in the hosted environment, where it is always present) for a graded result.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity (jscpd) — it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D33 JS/npm Dependency Vulnerabilities: JS/npm CVE matching reads package manifests and lockfiles — risk from how a dependency is used, and advisories not yet published, fall outside this scan.
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 god class(es) detected.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

Do you agree with this assessment?

D4 · Code Duplication10.0 / 10Exemplary✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 duplicated block group(s) detected.

✓ On the Gold path — maintain.

Detailed fixes: d4_recommendation.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D19 · Documentation Quality / 10Strong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

Akka CQRS activator's README is a solid single-file documentation document that describes the application as an issue-tracking demo showing event sourcing and CQRS with Akka. It states technical requirements (Scala 2.12, docker-compose 1.8, SBT, Node), walks through up-and-running steps (docker-compose up -d to start Cassandra; sbt yarn reStart to build frontend), shows a screenshot of the issue tracker, and explains the data-store design with an FSM-based write side and recovery semantics for actors. It also briefly mentions a read-side data store and four actor states plus a tag ('issue-tag') on each repository. The document is clear but lacks coverage of the outlined sections beyond what is shown in the visible portion (e.g. Read side, Http API, Frontend), so those are present per outline and should not be flagged as missing.

What to do

Improve Documentation Quality — currently 7.0/10. — Akka CQRS activator's README is a solid single-file documentation document that describes the application as an issue-tracking demo showing event sourcing and CQRS with Akka. It states technical requirements (Scala 2.12, docker-compose 1.8, SBT, Node), walks through up-and-running steps (docker-compose up -d to start Cassandra; sbt yarn reStart to build frontend), shows a screenshot of the issue tracker, and explains the data-store design with an FSM-based write side and recovery semantics for actors. It also briefly mentions a read-side data store and four actor states plus a tag ('issue-tag') on each repository. The document is clear but lacks coverage of the outlined sections beyond what is shown in the visible portion (e.g. Read side, Http API, Frontend), so those are present per outline and should not be flagged as missing.

Detailed fixes: d19_recommendation.md.

Do you agree with this assessment?

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)9.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 9.0 / 10 · rule-coverage 100% · ceiling Documented

1 finding(s): 0 critical, 1 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

Secret: generic-api-keysrc/main/resources/application.conf:32detected by gitleaks finding

Rotate the exposed credentials — git history can't be un-committed

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)10.0 / 10Exemplary○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

semgrep found no security issues.

✓ On the Gold path — maintain.

Detailed fixes: d29_recommendation.md.

Do you agree with this assessment?

D33 · JS/npm Dependency Vulnerabilities10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether JavaScript/npm dependencies have known published vulnerabilities (CVEs) — the npm ecosystem's biggest risk.

Method: JS/npm CVE scan via trivy fs --scanners vuln over JS manifests (package.json/yarn.lock/pnpm-lock/bun.lockb); 0-10 tight normalizer. NotApplicable without JS manifests. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No known-vulnerable JS/npm dependencies.

✓ On the Gold path — maintain.

Detailed fixes: d33_recommendation.md.

Do you agree with this assessment?

D34 · Knowledge Freshness0.0 / 10Critical✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

5 of 5 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/main/scala/org/akkacqrs/write/IssueRepository.scala.

Further orphaned files (smaller)

What to do

Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

D38 · OSV Dependency Vulnerabilities0.0 / 10Critical✓ Tool-verified

What it measures: Whether dependencies have known published vulnerabilities (CVEs) per the OSV database — read natively from whatever lockfile the repository ships (Cargo, npm, Go, Python, Maven, RubyGems, …). D33 and D30 add ecosystem-specific scanners on top for npm and .NET.

Method: Multi-ecosystem dependency-CVE scan via osv-scanner --recursive (queries the osv.dev database + parses lockfiles natively across ecosystems: npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven/Gradle pom.xml/gradle.lockfile, PyPI requirements.txt/poetry.lock/Pipfile.lock, Composer composer.lock, RubyGems Gemfile.lock, Hex mix.lock, pub pubspec.lock, Swift Package.resolved); severity tally (Critical/High/Medium/Low) to 0-10 tight normalizer (8.0). NotApplicable only when the repo declares no supported non-.NET dependency lockfile (a NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain); coverage needs a resolved lockfile. Additive to D33 (trivy fs); exhaustive + deterministic, DB kept fresh.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

98 finding(s): 16 critical, 52 high, 22 medium, 8 low.

High CVE: [GHSA redacted] · ×33ui/yarn.lockdetected by osv-scanner finding

Critical CVE: [GHSA redacted] · ×15ui/yarn.lockdetected by osv-scanner finding

Critical vulnerability: [GHSA redacted]ui/yarn.lockdetected by osv-scanner finding

High vulnerability: [GHSA redacted]ui/yarn.lockdetected by osv-scanner finding

What to do

Resolve the 33 High CVE finding(s) in OSV Dependency Vulnerabilities — start with yarn.lock (33). — One of this dimension's main actionable groups (33 issue-level).
Resolve the 15 Critical CVE finding(s) in OSV Dependency Vulnerabilities — start with yarn.lock (15). — One of this dimension's main actionable groups (15 issue-level).
Resolve the 1 Critical vulnerability finding(s) in OSV Dependency Vulnerabilities — start with yarn.lock. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d38_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

M1 · Documentation (README)6.7 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a 'Testing' section to the root README — how to run the test suite.
Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
Add a README to the 1 of 1 project(s) that lack one — worth up to 2 pts.

Do you agree with this assessment?

M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no `NNNN-title.md` documents and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
No C4/PlantUML/Mermaid diagram or architecture.md — the high-level shape isn't documented.

What to do

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).
Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.

Do you agree with this assessment?

M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Do you agree with this assessment?

M4 · Documentation accuracy7.5 / 10Strong◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

README claims Akka HTTP but no Akka HTTP actor or routes exist

What to do

Reconcile the README with reality: README claims Akka HTTP but no Akka HTTP actor or routes exist.

Do you agree with this assessment?

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

Add a CI workflow that builds and runs the test suite on every push/PR.

Do you agree with this assessment?

P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

No static application security testing detected. For this repository's stack, add scalafix or scapegoat (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build.

What to do

Run what this repository's stack ships: scalafix or scapegoat — or `semgrep --config=auto`, which runs on any language — — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.

What to do

Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.
Add an approval/environment gate (required reviewers / protection rules) before production promotion.

Do you agree with this assessment?

R1 · Type Safety0.0 / 10Critical✓ Tool-verified

React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.

Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.

0 typed · 16 plain JS — the untyped files are ui/src/App.js, ui/src/components/Calendar/Calendar.js, ui/src/components/Calendar/index.js, ui/src/components/IssuePage/BreadcrumbNav/BreadcrumbNav.js, ui/src/components/IssuePage/BreadcrumbNav/index.js, ui/src/components/IssuePage/IssueModal/IssueForm/IssueForm.js (+10 more).

What to do

Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up.

Do you agree with this assessment?

R10 · Code Duplication10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Copy-pasted token-identical blocks across the frontend (the D4 clone algorithm over JS/TS tokens, D-386).

Method: Copy-pasted token-identical blocks across the frontend (the D4 clone algorithm run over JS/TS tokens). Deterministic.

Do you agree with this assessment?

R2 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.

Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.

Do you agree with this assessment?

R3 · Large Files10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How many source files exceed the large-file threshold.

Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.

Do you agree with this assessment?

R6 · Tooling3.4 / 10Weak✓ Tool-verified

React / JS · Readiness — Whether the project wires up test, lint and typecheck — detected from each package.json script's COMMAND (eslint / tsc / vitest / jest / playwright), not just its name, and corroborated against CI-workflow invocations so a tool run only in CI still counts.

Method: package.json scanned for test/lint/typecheck script wiring. Deterministic presence check.

test ✓ · lint ✗ · typecheck ✗

What to do

Add eslint and type checking (adopt TypeScript, or type-check the existing JavaScript with `checkJs`) as package.json scripts and run them in CI.

Do you agree with this assessment?

R7 · Dead Code10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Files unreachable from every application/tooling/test entry point, and exports nothing imports (module-graph reachability, D-386).

Method: Dead code: files unreachable from every application/tooling/test entry point plus exports nothing imports, via module-graph reachability. Deterministic, exhaustive over the import graph.

Unreachable from the 2 application, 1 tooling and 1 test entry point(s) detected in this repo. Gate removals on your build/type-check — an undetected custom entry would make these reachable.
no import path from any entry point (2 application, 1 tooling, 1 test roots considered) — index.js

Do you agree with this assessment?

R8 · Dependency Hygiene5.0 / 10Adequate✓ Tool-verified

React / JS · Readiness — npm dependency truthfulness (D-386): unused dependencies, imports not declared anywhere, and type-/test-only packages shipped as production deps.

Method: npm dependency truthfulness: unused dependencies, imports declared nowhere, and type-/test-only packages shipped as production deps — from the manifest + import graph. Deterministic.

Imported but not declared in any reachable package.json — installs work only by hoisting accident. (×2) — BreadcrumbNav.js:4, App.js:3
Declared in ui/package.json but never imported anywhere in that package or its workspace members — dead weight and attack surface. Verify against build tooling before removing. (×2)

What to do

Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.

Do you agree with this assessment?

R9 · Circular Imports10.0 / 10Exemplary✓ Tool-verified

React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.

Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	69%	Adequate — gated by R1	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture	69%	Adequate	Strongest area.
Maturity	33%	Weak — gated by D34, M2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	24%	Critical — gated by R6, P1, P3	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	72%	Adequate — gated by D38	Capped at Fair by a Critical contributor — resolve it before relying on this lens.

Not included — 80 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC2 Forms & labels — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC3 Page structure — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC4 Keyboard semantics — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC5 ARIA correctness — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC6 Visual & motion safety — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AC7 A11y enforcement — Frontend below the scale floor (8 DOM element(s) < 25) — too little surface to assess accessibility.
AX1 Captive dependencies — no DI registrations detected
AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX2 Stateful singletons — no singleton implementations detected
AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
D1 Cyclomatic Complexity — Most of this repository's production source (.scala) had no cyclomatic complexity computed for it, so cyclomatic complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D10 Test Quality — ~352 lines of test source are present (.scala) but the test-quality collector reads C# only, so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included
D12 Dependency Hygiene — Dependency hygiene not measured — dependency manifest found but not parsed for hygiene
D14 License Compliance — Not scored — this repository's package manifest is not parsed for licence data yet. A gap in the analyzer's language coverage, NOT a finding that the repository's licenses are compliant (an sbt build (build.sbt) and package.json), which this pass does not parse yet — so this dimension asserts nothing about this repository's licensing in either direction.
D15 Churn × Complexity Hotspots — complexity unreadable for .scala — churn × complexity hotspots could not be measured
D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D2 Cognitive Complexity — Most of this repository's production source (.scala) had no cognitive complexity computed for it, so cognitive complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
D22 Internal API Consistency — No exposed public API
D23 Boundary Type-Coupling — Production source is present (.scala) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) and package.json — not scanned yet) — where an OSV-supported manifest exists, dependency vulnerabilities for this repository are reported under D38 instead.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
D6 Cohesion (LCOM4) — Cohesion (LCOM4) is measured over a C#/VB class graph, and this repository's production source is .scala, which this pass does not read — so no class could be assessed. Not scored — this is a gap in the analyzer, not a finding about this repository.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
D9 Test Distribution — Test source is present (.scala) but the test-pyramid classifier reads C# only, so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
DM1 Domain Modelling — applicable but not scored (2 of 2 signals for this style — below the bar we score at): 14 value object(s); 1 domain event(s)
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
GD1 Unfinished & placeholder code — no source files
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — no CI workflow found
P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (`sbt clean coverage test coverageReport` via sbt-scoverage) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
R4 Test Coverage — 1 test file(s) reach none of 15 production file(s) via imports — exercised outside the JS import graph (integration/bundled), not import-reachable
R5 Dependency Freshness — uses a yarn lockfile — dependency freshness not measured here; JS/npm CVEs are scored in D33 (JS/npm Dependency Vulnerabilities)
S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Issue — 51 finding(s)

D38 · OSV Dependency Vulnerabilities · High CVE · ×33

High CVE: [GHSA redacted] ui/yarn.lock — ansi-html 0.0.7: [GHSA redacted] — ansi-html is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin ansi-html to 0.0.8 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — ansi-regex 3.0.0: [GHSA redacted] — ansi-regex is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin ansi-regex to 3.0.1 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — ansi-regex 4.1.0: [GHSA redacted] — ansi-regex is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin ansi-regex to 4.1.1 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — ansi-regex 5.0.0: [GHSA redacted] — ansi-regex is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin ansi-regex to 5.0.1 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — async 2.6.3: [GHSA redacted] — async is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin async to 2.6.4 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — axios 0.21.1: [GHSA redacted] — upgrade to 0.31.1. This is 1 of 24 advisories with a published fix this scan raises against axios 0.21.1, and their fixed versions do not agree — anything below 0.33.0 still leaves at least one of them open. Take this package to 0.33.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 24 advisories this scan raises against axios 0.21.1: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — body-parser 1.19.0: [GHSA redacted] — body-parser is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin body-parser to 1.20.3 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 2 advisories with a published fix this scan raises against body-parser 1.19.0, and their fixed versions do not agree — anything below 1.20.6 still leaves at least one of them open. Take this package to 1.20.6 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against body-parser 1.19.0: [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — brace-expansion 1.1.11: [GHSA redacted] — brace-expansion is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin brace-expansion to 1.1.16 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 5 advisories with a published fix this scan raises against brace-expansion 1.1.11, and their fixed versions do not agree — anything below 1.1.18 still leaves at least one of them open. Take this package to 1.1.18 or later: that is the floor for the package, not this row's target alone. This one row stands for the 5 advisories this scan raises against brace-expansion 1.1.11: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — braces 2.3.2: [GHSA redacted] — braces is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (— 3.0.3 is a MAJOR ahead of the resolved 2.3.2, so an `overrides` pin would force a breaking version under a dependent written against 2.3.2; upgrading the declaring package is the remedy, and where no patched release exists in your major line, record the exposure instead).
High CVE: [GHSA redacted] ui/yarn.lock — braces 3.0.2: [GHSA redacted] — braces is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin braces to 3.0.3 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — browserify-sign 4.0.4: [GHSA redacted] — browserify-sign is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin browserify-sign to 4.2.2 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — cross-spawn 6.0.5: [GHSA redacted] — cross-spawn is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin cross-spawn to 6.0.6 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — cross-spawn 7.0.1: [GHSA redacted] — cross-spawn is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin cross-spawn to 7.0.5 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — decode-uri-component 0.2.0: [GHSA redacted] — decode-uri-component is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin decode-uri-component to 0.2.1 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — flatted 2.0.1: [GHSA redacted] — flatted is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (— 3.4.0 is a MAJOR ahead of the resolved 2.0.1, so an `overrides` pin would force a breaking version under a dependent written against 2.0.1; upgrading the declaring package is the remedy, and where no patched release exists in your major line, record the exposure instead). This is 1 of 2 advisories with a published fix this scan raises against flatted 2.0.1, and their fixed versions do not agree — anything below 3.4.2 still leaves at least one of them open. Take this package to 3.4.2 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against flatted 2.0.1: [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — follow-redirects 1.13.1: [GHSA redacted] — follow-redirects is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin follow-redirects to 1.14.7 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 5 advisories with a published fix this scan raises against follow-redirects 1.13.1, and their fixed versions do not agree — anything below 1.16.0 still leaves at least one of them open. Take this package to 1.16.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 5 advisories this scan raises against follow-redirects 1.13.1: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — glob-parent 5.1.0: [GHSA redacted] — glob-parent is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin glob-parent to 5.1.2 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — http-proxy-middleware 0.19.1: [GHSA redacted] — http-proxy-middleware is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (— 2.0.7 is a MAJOR ahead of the resolved 0.19.1, so an `overrides` pin would force a breaking version under a dependent written against 0.19.1; upgrading the declaring package is the remedy, and where no patched release exists in your major line, record the exposure instead). This is 1 of 2 advisories with a published fix this scan raises against http-proxy-middleware 0.19.1, and their fixed versions do not agree — anything below 2.0.10 still leaves at least one of them open. Take this package to 2.0.10 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against http-proxy-middleware 0.19.1: [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — ini 1.3.5: [GHSA redacted] — ini is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin ini to 1.3.6 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — ip 1.1.5: [GHSA redacted] — no fixed version has been published yet. Track the advisory; ip is not declared in this repo's manifests: it is pulled in transitively, so the action is on the dependency that requires it — upgrade or replace that dependent. This one row stands for the 2 advisories this scan raises against ip 1.1.5: [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — is-svg 3.0.0: [GHSA redacted] — is-svg is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (— 4.2.2 is a MAJOR ahead of the resolved 3.0.0, so an `overrides` pin would force a breaking version under a dependent written against 3.0.0; upgrading the declaring package is the remedy, and where no patched release exists in your major line, record the exposure instead). This is 1 of 2 advisories with a published fix this scan raises against is-svg 3.0.0, and their fixed versions do not agree — anything below 4.3.0 still leaves at least one of them open. Take this package to 4.3.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against is-svg 3.0.0: [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — js-yaml 3.13.1: [GHSA redacted] — js-yaml is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin js-yaml to 3.15.0 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 3 advisories with a published fix this scan raises against js-yaml 3.13.1, and their fixed versions do not agree — anything below 3.15.0 still leaves at least one of them open. Take this package to 3.15.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 3 advisories this scan raises against js-yaml 3.13.1: [GHSA redacted], [GHSA redacted], [GHSA redacted].
High CVE: [GHSA redacted] ui/yarn.lock — json5 1.0.1: [GHSA redacted] — json5 is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin json5 to 1.0.2 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — json5 2.1.2: [GHSA redacted] — json5 is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin json5 to 2.2.2 with an `overrides` entry (`resolutions` if you use Yarn)).
High CVE: [GHSA redacted] ui/yarn.lock — lodash 4.17.15: [GHSA redacted] — lodash is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin lodash to 4.17.21 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 4 advisories with a published fix this scan raises against lodash 4.17.15, and their fixed versions do not agree — anything below 4.18.0 still leaves at least one of them open. Take this package to 4.18.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 4 advisories this scan raises against lodash 4.17.15: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].
+ 8 more in this group — see findings.md.

D38 · OSV Dependency Vulnerabilities · Critical CVE · ×15

Critical CVE: [GHSA redacted] ui/yarn.lock — @babel/traverse 7.9.0: [GHSA redacted] — @babel/traverse is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin @babel/traverse to 7.23.2 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — cipher-base 1.0.4: [GHSA redacted] — cipher-base is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin cipher-base to 1.0.5 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — eventsource 1.0.7: [GHSA redacted] — eventsource is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin eventsource to 1.1.1 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — form-data 2.3.3: [GHSA redacted] — form-data is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin form-data to 2.5.4 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 2 advisories with a published fix this scan raises against form-data 2.3.3, and their fixed versions do not agree — anything below 2.5.6 still leaves at least one of them open. Take this package to 2.5.6 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against form-data 2.3.3: [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — json-schema 0.2.3: [GHSA redacted] — json-schema is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin json-schema to 0.4.0 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — loader-utils 1.2.3: [GHSA redacted] — loader-utils is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin loader-utils to 1.4.1 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 3 advisories with a published fix this scan raises against loader-utils 1.2.3, and their fixed versions do not agree — anything below 1.4.2 still leaves at least one of them open. Take this package to 1.4.2 or later: that is the floor for the package, not this row's target alone. This one row stands for the 3 advisories this scan raises against loader-utils 1.2.3: [GHSA redacted], [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — loader-utils 1.4.0: [GHSA redacted] — loader-utils is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin loader-utils to 1.4.1 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 3 advisories with a published fix this scan raises against loader-utils 1.4.0, and their fixed versions do not agree — anything below 1.4.2 still leaves at least one of them open. Take this package to 1.4.2 or later: that is the floor for the package, not this row's target alone. This one row stands for the 3 advisories this scan raises against loader-utils 1.4.0: [GHSA redacted], [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — merge-deep 3.0.2: [GHSA redacted] — merge-deep is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin merge-deep to 3.0.3 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — minimist 0.0.8: [GHSA redacted] — minimist is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin minimist to 0.2.4 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 2 advisories with a published fix this scan raises against minimist 0.0.8, and their fixed versions do not agree — anything below 0.2.4 still leaves at least one of them open. Take this package to 0.2.4 or later: that is the floor for the package, not this row's target alone. This one row stands for the 2 advisories this scan raises against minimist 0.0.8: [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — minimist 1.2.5: [GHSA redacted] — minimist is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin minimist to 1.2.6 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — pbkdf2 3.0.17: [GHSA redacted] — pbkdf2 is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin pbkdf2 to 3.1.3 with an `overrides` entry (`resolutions` if you use Yarn)). This one row stands for the 2 advisories this scan raises against pbkdf2 3.0.17: [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — sha.js 2.4.11: [GHSA redacted] — sha.js is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin sha.js to 2.4.12 with an `overrides` entry (`resolutions` if you use Yarn)).
Critical CVE: [GHSA redacted] ui/yarn.lock — shell-quote 1.7.2: [GHSA redacted] — shell-quote is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin shell-quote to 1.7.3 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 3 advisories with a published fix this scan raises against shell-quote 1.7.2, and their fixed versions do not agree — anything below 1.9.0 still leaves at least one of them open. Take this package to 1.9.0 or later: that is the floor for the package, not this row's target alone. This one row stands for the 3 advisories this scan raises against shell-quote 1.7.2: [GHSA redacted], [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — url-parse 1.4.7: [GHSA redacted] — url-parse is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin url-parse to 1.5.8 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 6 advisories with a published fix this scan raises against url-parse 1.4.7, and their fixed versions do not agree — anything below 1.5.9 still leaves at least one of them open. Take this package to 1.5.9 or later: that is the floor for the package, not this row's target alone. This one row stands for the 6 advisories this scan raises against url-parse 1.4.7: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].
Critical CVE: [GHSA redacted] ui/yarn.lock — websocket-driver 0.7.3: [GHSA redacted] — websocket-driver is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin websocket-driver to 0.7.5 with an `overrides` entry (`resolutions` if you use Yarn)). This one row stands for the 2 advisories this scan raises against websocket-driver 0.7.3: [GHSA redacted], [GHSA redacted].

D28 · Secrets (history) · Secret · ×1

Secret: generic-api-key src/main/resources/application.conf:32 — matched rule 'generic-api-key'

D38 · OSV Dependency Vulnerabilities · Critical vulnerability · ×1

Critical vulnerability: [GHSA redacted] ui/yarn.lock — elliptic 6.5.2: [GHSA redacted] — elliptic is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin elliptic to 6.6.1 with an `overrides` entry (`resolutions` if you use Yarn)). This is 1 of 8 advisories with a published fix this scan raises against elliptic 6.5.2, and their fixed versions do not agree — anything below 6.6.1 still leaves at least one of them open. Take this package to 6.6.1 or later: that is the floor for the package, not this row's target alone. This one row stands for the 9 advisories this scan raises against elliptic 6.5.2: [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted], [GHSA redacted].

D38 · OSV Dependency Vulnerabilities · High vulnerability · ×1

High vulnerability: [GHSA redacted] ui/yarn.lock — http-proxy 1.18.0: [GHSA redacted] — http-proxy is not declared in this repo's manifests: it is pulled in transitively, so upgrade the dependency that requires it (or pin http-proxy to 1.18.1 with an `overrides` entry (`resolutions` if you use Yarn)).

Warning — 1 finding(s)

D16 · Bus Factor · dormant codebase · ×1

dormant codebase — no living knowledge left to concentrate — All 2 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness).

Recommendation — 5 finding(s)

D11 · Test Reliability · Test reliability not included · ×1

Test reliability not included — Test source is present (.scala) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.

D15 · Churn × Complexity Hotspots · complexity unreadable for .scala · ×1

complexity unreadable for .scala — churn × complexity hotspots could not be measured — A hotspot is churn × complexity. Churn was measured (0 line(s) across the 90-day window), but no complexity could be computed for .scala, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.

D28 · Secrets (history) · Rotate the exposed credentials · ×1

Rotate the exposed credentials — git history can't be un-committed — Some of these secrets are in git HISTORY: deleting the file does not remove them (the commit persists on every clone, fork and backup). The remediation is to ROTATE each historically-exposed credential and treat it as compromised — not to delete the file. Rewriting history is disruptive and unreliable across existing forks. (Working-tree-only secrets — no commit — can instead be removed from the file and moved to a secret store.)

D34 · Knowledge Freshness · Further orphaned files (smaller) · ×1

Further orphaned files (smaller) — 5 of 5 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 100 lines or more, excluding tests, vendored, generated and example/demo trees, largest first). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — largest first: src/main/scala/org/akkacqrs/write/IssueRepository.scala, src/main/scala/org/akkacqrs/api/IssueRoutes.scala, src/main/scala/org/akkacqrs/read/IssueService.scala (and 2 more). Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.

D8 · Code Coverage · Coverage not included · ×1

Coverage not included — suite not readable by the collector — Coverage NOT MEASURED: test source is present (.scala) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (`sbt clean coverage test coverageReport` via sbt-scoverage) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored.

Info — 2 finding(s)

D12 · Dependency Hygiene · Dependency hygiene not measured · ×1

Dependency hygiene not measured — dependency manifest found but not parsed for hygiene — This repository's dependency manifests (an sbt build (build.sbt) and package.json) were found, but this pass cannot parse them for hygiene, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D38 wherever the manifest is OSV-readable.

D22 · Internal API Consistency · No exposed public API · ×1

No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Findings	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .	1	artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --json --quiet --timeout 0 --metrics off .	0	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	none (no readable dependency manifest)	—	none (no readable dependency manifest): not present in this environment	0	—
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.	0	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.	0	—
D33 · JS/npm Dependency Vulnerabilities	trivy	—	trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs /bin/ --skip-dirs /obj/ . --skip-db-update	0	—
D36 · Supply-chain Provenance & Signing	provenance	—	provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.	0	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	0	—
D38 · OSV Dependency Vulnerabilities	osv-scanner	—	osv-scanner --format json --recursive .	98	artifacts/raw/osv-scanner.json
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	0	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	0	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	0	—

Run 019fca6b-45f0-7f8a-96ad-6fb6c0a93f6a · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

BranislavLazic/akka-Cqrs-Activator

Executive summary

Top priorities

Diagnosis — what's actually going on

Architecture — module dependency matrix

At a glance — Code Health · 69% · Adequate · gated by R1

At a glance — Architecture · 69% · Adequate

At a glance — Maturity · 33% · Weak · gated by D34, M2

At a glance — Readiness · 24% · Critical · gated by R6, P1, P3

At a glance — Security · 72% · Adequate · gated by D38

Security & Compliance — OWASP Top-10 mapping

Roadmap

File quality

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts