Public report — Fli, published 6 Aug 2026. Concrete security findings (CVE IDs, secret matches, dependency versions) are hidden in this version; ask the repo owner for the full report.
Watchdogby Canine Development 06-08-2026 @ 04:24 UTC Public
Code Health Audit

CaptnCodr/Fli

coverage not measured
67% Adequate
CriticalWeakAdequateStrongExemplary
upper third — near Strong
Security 90% Exemplary Architecture 69% Adequate Maturity 66% Adequate Readiness 63% Adequate

Hobby · 682 LoC · weakest lens: Readiness (63%)

Grounded in facts. Every number here is computed, not narrated — reproducible, tool-backed, and traceable to a line of code. How to trust this ▸

14/16dimensions tool-verifieddeterministic · confidence 1.0 · 2 LLM-assisted, advisory
3findings with an exact file:lineof 8 — the remainder are repo-wide signals (a dimension-level measurement, not a single line); open any file:line and verify
16/93dimensions across the health lenses682 LoC — wide & deep

Executive summary

Read through the Production lens — the standard calibration. *Green* means good enough to run in production. The score is absolute and comparable across repos.

CaptnCodr/Fli is sound in substance but carries real gaps (67%). It is not in crisis, but the issues below raise the cost of changing it — friction its consumers ultimately inherit.

It is strongest in Security (90%) — its security and compliance posture is in good shape.

The area that most needs attention is Readiness (63%) — releases are harder to depend on — versioning, release notes and dependency hygiene are thin, so consumers can't easily tell what changed or trust an upgrade. Maturity (66%) is the next concern — onboarding is slow — key decisions and the architecture aren't written down, so contributors have to reverse-engineer the intent.

Leadership focus, highest impact first: Record significant decisions one document per decision (Architecture documentation); 'Testing' section to the root README (Documentation (README)); 1 The Usage examples show only one command type (`Shell CMD` (Documentation Quality).

For scale: Hobby (~682 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

It builds on a genuinely strong Security foundation (90%); the priorities above are the highest-leverage way to bring the rest up to that level.

Architecture 69% Adequate Maturity 66% Adequate · gated by M2 Readiness 63% Adequate · gated by P3 Security 90% ★ Exemplary
How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.
Readiness 63% · 50% weightMaturity 66% · 27% weightArchitecture 69% · 15% weightSecurity 90% · 8% weight

Raise Readiness 63 → 70 (the Healthy floor) ⇒ headline 67 → ~69.

Code composition — where the lines go
Tests 100%
Rebuild cost & value ~ Modeled — €790–€4,000
Cost to rebuild€790–€4,000 (0.1 person-years (13–42 h), ~1 engineer)
Domain complexityStandard — harder problems cost more per line
Quality factor0.9× (at 67% quality) — the last 20% of quality is most of the work
Size & shapeHobby · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.0) — standard service × a 0.9× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

1
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).
+4.9 pts · Medium effort · Architecture documentation
2
Add a 'Testing' section to the root README — how to run the test suite.
+4.8 pts · Medium effort · Documentation (README)
3
Resolve the 1 The Usage examples show only one command type (`Shell CMD`, `Exec`), but… finding(s) in Documentation Quality — start with README.md.
+1.9 pts · Low effort · Documentation Quality

Diagnosis — what's actually going on

Highest-leverage move · Medium · Leverage
Of everything flagged, the best return on effort is: Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form). The rest can wait behind it.
Evidence: priority ranking: top of 4 ranked by impact/effort
→ Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

At a glance — Architecture · 69% · Adequate

The Good
D35 · .NET / C# Change Coupling 10.0

At a glance — Maturity · 66% · Adequate · gated by M2

The Good
D16 · .NET / C# Bus Factor 10.0 D19 · .NET / C# Documentation Quality 8.0 D21 · .NET / C# Naming Consistency 10.0 D34 · .NET / C# Knowledge Freshness 10.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0
The Bad
M1 · Repo Documentation (README) 6.7
The Ugly
M2 · Repo Architecture documentation 2.0

At a glance — Readiness · 63% · Adequate · gated by P3

The Good
D13 · .NET / C# Secret Scanning 10.0 P1 · Repo CI/CD gates 10.0 P6 · Repo Release Hygiene 10.0
The Ugly
P3 · Repo Security & performance tooling 0.0

At a glance — Security · 90% · Exemplary

The Good
D28 · .NET / C# Secrets (history) 10.0 D29 · .NET / C# Static Analysis (SAST) 7.1 D30 · .NET / C# Dependency Vulnerabilities 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A03:2021 — Injection2High / Critical

Roadmap

Begin by establishing a formal architecture decision record process, creating dated documents that capture context, decisions, and consequences within a dedicated directory. Next, update the root README to include a dedicated section explaining how to run the test suite. Then, address the identified gaps in documentation quality, starting with the README. Finally, resolve the high-priority static analysis findings, beginning with the build configuration.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).+4.9 ptsMediumArchitecture documentation
Add a 'Testing' section to the root README — how to run the test suite.+4.8 ptsMediumDocumentation (README)
Resolve the 1 The Usage examples show only one command type (`Shell CMD`, `Exec`), but… finding(s) in Documentation Quality — start with README.md.+1.9 ptsLowDocumentation Quality
Resolve the 2 High finding(s) in Static Analysis (SAST) — start with build.yml (2).+0.8 ptsLowStatic Analysis (SAST)
Enable measurement for Text alternatives.unlocks measurementLowText alternatives
Enable measurement for Forms & labels.unlocks measurementLowForms & labels
Enable measurement for Page structure.unlocks measurementLowPage structure
Enable measurement for Keyboard semantics.unlocks measurementLowKeyboard semantics

File quality

Per-file score 0–10 — a quality signature. Of 2 files carrying findings, judged against the Production bar: 0% slop · 50% mixed · 50% near-clean.

FileScoreBandWorst signal
.github/workflows/build.yml5.8MixedStatic Analysis (SAST): High: github-actions-mutable-action-tag
README.md9.5Near-cleanDocumentation Quality: The Usage examples show only one command type (`Shell CMD`, `Exec`), but the architecture docs outline Output, printing fields, `Command.toString`, and builder operations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 14 of 16 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 2 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.3 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 16 dimensions across the health lenses
D13D16D19D21D28D29D30D34D35M1M2M3M4P1P3P6

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 3 of 8 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
jscpdCode duplication—✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.302✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.302✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivySecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurementLocal LLM◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019fd551-132c-7803-92de-f375c81235ef.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

A clean run — every tool resolved and ran, and every applicable dimension was measured at full confidence. No scanner was unavailable, no analysis timed out or crashed, and nothing fell back to a degraded estimate.

When something does degrade — a missing scanner, a shallow clone, an LLM hiccup — it is named here explicitly and its exact cause recorded in diagnostics.md, never absorbed silently into the score.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
  • D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement.
  • D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and the advisory database — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen.
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
  • P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

D16 · Bus Factor10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether knowledge is concentrated in too few people (the "bus factor").

Method: Living knowledge per author via time-decayed commit attribution (6-month half-life, focus weighting) across largest source files. Deterministic, avoids blame's mechanical-refactor false positives.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No source file's living knowledge is concentrated in a single author.

✓ On the Gold path — maintain.

Detailed fixes: d16_recommendation.md.

D19 · Documentation Quality / 10Strong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The single README is a clear, well-written documentation file for the Fli CLI tool. It states the project's purpose and features (easy process starting, computation-expression syntax, authenticated tool wrapping), gives install instructions, and shows runnable usage examples with code blocks that match the API. The document is complete as it appears before being clipped mid-sentence; its outline lists all visible sections and more.

The Usage examples show only one command type (`Shell CMD`, `Exec`), but the architecture docs outline Output, printing fields, `Command.toString`, and builder operations.README.md

What to do

  1. Resolve the 1 The Usage examples show only one command type (`Shell CMD`, `Exec`), but… finding(s) in Documentation Quality — start with README.md. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d19_recommendation.md · top locations in Appendix A, every location in findings.md.

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

D29 · Static Analysis (SAST)7.1 / 10Strong✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 7.1 / 10 · rule-coverage 100% · ceiling Documented

2 finding(s): 0 critical, 2 high, 0 medium, 0 low.

High: github-actions-mutable-action-tag · ×2.github/workflows/build.yml:22detected by semgrep finding

What to do

  1. Resolve the 2 High finding(s) in Static Analysis (SAST) — start with build.yml (2). — One of this dimension's main actionable groups (2 issue-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any dependencies have known published vulnerabilities (CVEs), direct or transitive.

Method: NuGet CVE scan via dotnet list package --vulnerable including transitive; severity tally (Critical/High/Medium/Low) to 0-10 tight normalizer. Exhaustive, deterministic; degrades when absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No known-vulnerable NuGet packages (direct or transitive).

✓ On the Gold path — maintain.

Detailed fixes: d30_recommendation.md.

D34 · Knowledge Freshness10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

Every significant source file has living knowledge — recently and meaningfully worked.

✓ On the Gold path — maintain.

Detailed fixes: d34_recommendation.md.

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

M1 · Documentation (README)6.7 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Add a 'Testing' section to the root README — how to run the test suite.
  • Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no `NNNN-title.md` documents and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

  • Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

  • No static application security testing detected. For this repository's stack, add `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) as a CI step.

What to do

  • Add a SAST step to CI running what this repository's stack ships: `semgrep --config=auto` plus gitleaks for committed secrets (F# is not a CodeQL language and has no language-specific SAST engine) — so a security regression fails the build instead of landing.
  • Enable Dependabot/Renovate or a dependency-review gate.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Architecture69%AdequateAcceptable, with room to improve.
Maturity66%Adequate — gated by M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness63%Adequate — gated by P3Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security90%ExemplaryStrongest area.
Not included — 77 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
  • AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
  • AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
  • AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
  • AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
  • AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
  • AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
  • AX1 Captive dependencies — no DI registrations detected
  • AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX2 Stateful singletons — no singleton implementations detected
  • AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • D1 Cyclomatic Complexity — Most of this repository's production source (.fs) had no cyclomatic complexity computed for it, so cyclomatic complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
  • D10 Test Quality — ~1259 lines of test source are present (.fs) but the test-quality collector reads C# only, so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
  • D11 Test Reliability — Test reliability not included
  • D12 Dependency Hygiene — Dependency hygiene not measured — no packages were read
  • D14 License Compliance — Not scored — this repository's projects are MSBuild/NuGet projects, whose package licenses are exactly what this dimension reads, but no license could be resolved for them (the .NET license collector did not run, or restore failed). A gap in the analysis run, NOT a finding that the repository's licenses are compliant.
  • D15 Churn × Complexity Hotspots — complexity unreadable for .fs — churn × complexity hotspots could not be measured
  • D17 Explicit Debt — the C# workspace loaded 0 projects, so explicit-debt density could not be measured
  • D18 Solution Shape — D18 scores the shape of a C#/VB .NET solution; this repository's .NET projects are all F# (.fsproj), which the C#/VB workspace does not load, so the dimension does not apply.
  • D2 Cognitive Complexity — Most of this repository's production source (.fs) had no cognitive complexity computed for it, so cognitive complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
  • D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
  • D22 Internal API Consistency — No exposed public API
  • D23 Boundary Type-Coupling — Production source is present (.fs) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — No inline comments to assess — comment value is not applicable here.
  • D25 ADR Conformance — no ADRs to check
  • D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
  • D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
  • D3 God Classes — Most of this repository's production source (.fs) was not read by god-class detection, so class size was not assessed for the languages that are the product — whatever else this pass did read is not this repository's class size. Not scored — this is a gap in the analyzer, not a verdict about this repository.
  • D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
  • D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
  • D33 JS/npm Dependency Vulnerabilities — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.
  • D36 Supply-chain Provenance & Signing — The CI pipeline builds and tests but publishes no released artifact — no package publish, container push, GitHub release or deployment step. Supply-chain provenance, signing and SBOM attest RELEASED artifacts, so there is nothing to attest here. Add them to the release pipeline when this repo starts shipping artifacts (a published package, a container image, a deployed service or a tagged release).
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D38 OSV Dependency Vulnerabilities — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.
  • D39 IL Efficiency — The target did not build, so no IL was available to measure.
  • D4 Code Duplication — Most of this repository's production source (.fs) was not read by duplication detection, so code duplication was not measured — whatever else this pass did read is not this repository's duplication. Not scored: no source of those file kinds was exposed to the token comparison by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
  • D6 Cohesion (LCOM4) — Cohesion (LCOM4) is measured over a C#/VB class graph, and this repository's production source is .fs, which this pass does not read — so no class could be assessed. Not scored — this is a gap in the analyzer, not a finding about this repository.
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • D8 Code Coverage — Coverage not measured — no coverage collector is wired up
  • D9 Test Distribution — Test source is present (.fs) but the test-pyramid classifier reads C# only, so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
  • DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this check looks for
  • ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
  • GD1 Unfinished & placeholder code — no source files
  • IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
  • P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
  • P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
  • P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
  • P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (Cobertura — `dotnet test --collect:"XPlat Code Coverage"` with a `coverlet.collector` PackageReference) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Issue — 2 finding(s)
D29 · Static Analysis (SAST) · High · ×2
  • High: github-actions-mutable-action-tag .github/workflows/build.yml:22 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v3`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v3 --jq .sha`.
  • High: github-actions-mutable-action-tag .github/workflows/build.yml:24 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/setup-dotnet@<40-character SHA>`. This step references `actions/setup-dotnet@v3`; resolve the SHA it points at today with `gh api repos/actions/setup-dotnet/commits/v3 --jq .sha`.
Warning — 1 finding(s)
D8 · Code Coverage · Coverage not measured · ×1
  • Coverage not measured — no coverage collector is wired up — Coverage NOT MEASURED: the test suite built and its tests PASSED, but the run produced no coverage data — `--collect:"XPlat Code Coverage"` found no data collector, which is what a test project with no `coverlet.collector` PackageReference does. Nothing is wrong with the suite or the build; there is simply no coverage instrumentation wired up. Add a `coverlet.collector` PackageReference to the test project(s) (or commit the Cobertura/OpenCover/lcov report your CI produces) and real coverage will be measured. It is excluded from the score rather than counted as a near-zero defect.
Recommendation — 3 finding(s)
D11 · Test Reliability · Test reliability not included · ×1
  • Test reliability not included — Test source is present (.fs) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
D15 · Churn × Complexity Hotspots · complexity unreadable for .fs · ×1
  • complexity unreadable for .fs — churn × complexity hotspots could not be measured — A hotspot is churn × complexity. Churn was measured (430 line(s) across the 90-day window), but no complexity could be computed for .fs, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.
D19 · Documentation Quality · The Usage examples show only one command type (`Shell CMD`, `Exec`), but the architecture docs outline Output, printing fields, `Command.toString`, and builder operations. · ×1
  • The Usage examples show only one command type (`Shell CMD`, `Exec`), but the architecture docs outline Output, printing fields, `Command.toString`, and builder operations. README.md — Link to a dedicated 'Usage by Command Type' doc so new users can find each API without reading through the entire README.
Info — 2 finding(s)
D12 · Dependency Hygiene · Dependency hygiene not measured · ×1
  • Dependency hygiene not measured — no packages were read — This repository's projects (.fs) are MSBuild/NuGet projects and their `<PackageReference>` dependencies are exactly what this dimension assesses — but `dotnet list package` returned no packages for them, so there was nothing to assess. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED. This is a gap in the analysis run (restore or project-load failed for these projects), not a verdict about this repository.
D22 · Internal API Consistency · No exposed public API · ×1
  • No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .0artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --json --quiet --timeout 0 --metrics off .2artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesdotnet—dotnet list src/Fli.sln package --vulnerable --include-transitive --format json0artifacts/raw/dotnet-vulnerable.json
D31 · IaC & Container Securitytrivy—trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.0—
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.0—
D33 · JS/npm Dependency Vulnerabilitiestrivy—trivy: not applicable — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.0—
D36 · Supply-chain Provenance & Signingprovenance—provenance: not applicable — The CI pipeline builds and tests but publishes no released artifact — no package publish, container push, GitHub release or deployment step. Supply-chain provenance, signing and SBOM attest RELEASED artifacts, so there is nothing to attest here. Add them to the release pipeline when this repo starts shipping artifacts (a published package, a container image, a deployed service or a tagged release).0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D38 · OSV Dependency Vulnerabilitiesosv-scanner—osv-scanner: not applicable — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—

Run 019fd551-132c-7803-92de-f375c81235ef · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 2 · Warnings: 1 · Recommendations: 3 · Info: 2 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 06-08-2026 @ 04:24 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md