Faraone-Dev/atomic-mesh

Executive summary

Faraone-Dev/atomic-mesh scores 51 out of 100 and is rated Adequate, while seven of its eight lenses score higher still: Event Sourcing at 100, Architecture at 95 and Performance at 91, all rated Exemplary, and Code Health at 64, Maturity at 61, Accessibility at 56 and Production Readiness at 54, all rated Adequate.

The score is lower than those seven because the weakest lens counts most, and here that is Security and Compliance, which scores 42 and is rated Weak. Its Access Controls dimension scores 0 out of 10, and until that reaches 4, Security and Compliance can't be rated higher than Adequate. The first actions are to protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do and to set security response headers on what the server sends — actix-web's `DefaultHeaders::new().add((header::X_CONTENT_TYPE_OPTIONS, "nosniff"))`, tower-http's `SetResponseHeaderLayer::overriding(…)` on an axum router, or keep Rocket's default `Shield` — with `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy on every response, and if Security and Compliance rose to 70, the score would rise from 51 to about 59.

14 findings are critical: 11 in Static Analysis (SAST) and three in Dependency Vulnerabilities.

Watchdog couldn't measure 21 dimensions in this code, among them Code Coverage, Test Reliability and Navigability, so they are left out of the score. The product code is 8,427 lines, which would take an estimated 0.1 person-years, around €8,700, to rebuild.

Code Health 64 Adequate, capped by Structured logging Architecture 95 ★ Exemplary Maturity 61 Adequate, capped by Architecture documentation Production Readiness 54 Adequate, capped by Outbound HTTP resilience Security and Compliance 42 Weak, capped by Access Controls Event Sourcing 100 ★ Exemplary Accessibility 56 Adequate Performance 91 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.

Security and Compliance 42 · counts for 45%Production Readiness 54 · counts for 25%Accessibility 56 · counts for 14%Maturity 61 · counts for 8%Code Health 64 · counts for 4%Performance 91 · counts for 2%Architecture 95 · counts for 1%Event Sourcing 100 · counts for 1%

If Security and Compliance rose from 42 to 70, the lowest score rated Strong, the score would rise from 51 to about 59.

Code composition: what the lines of code are

Product code 92%Tests 8%

New since the last survey: 7 findings

These 7 critical or serious findings weren't in the previous survey, on 7 October 2026.

Dependency Vulnerabilities · REDACTED
Supply-chain Provenance & Signing · REDACTED
Access Controls · No authorization crates/atomic-node/src/dashboard.rs
Visual & motion safety · Animation without a prefers-reduced-motion guard dashboard/index.html
Visual & motion safety · Animation without a prefers-reduced-motion guard dashboard/index.html
Visual & motion safety · Animation without a prefers-reduced-motion guard dashboard/index.html
Visual & motion safety · Animation without a prefers-reduced-motion guard dashboard/index.html

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 2 findings

These 2 critical or serious findings were in the previous survey, on 7 October 2026, and are gone from this one.

Supply-chain Provenance & Signing REDACTED
Visual & motion safety · Animation without a prefers-reduced-motion guard dashboard/index.html

Rebuild cost: about €8,700 · Estimate

Cost to rebuild	€2,900 to €15,000, for 48 to 153 hours of work, about 0.1 person-years for one engineer
Difficulty of the problem	Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor	×0.7 at a score of 51. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size	Small: 8,427 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

Raises the score by about 8 points · Medium effort · Access Controls

Set security response headers on what the server sends — actix-web's `DefaultHeaders::new().add((header::X_CONTENT_TYPE_OPTIONS, "nosniff"))`, tower-http's `SetResponseHeaderLayer::overriding(…)` on an axum router, or keep Rocket's default `Shield` — with `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy on every response.

Raises the score by about 6 points · Medium effort · Web-Security Posture

Resolve the 3 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3).

Raises the score by about 2 points · Low effort · Dependency Vulnerabilities

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk

This code would cost about €8,700 to build again, about 0.1 person-years of work. Its weakest lens is Security and Compliance, at 42 (Weak). Security and Compliance is about how well the product is protected, and how it handles personal data. Because the weakest lens counts most in the score, work on Security and Compliance also moves the score most.

Based on: the rebuild estimate · the Security and Compliance grade · how much each lens counts

What to do: Start with the Security and Compliance actions in Top priorities.

If you do one thing first · First action

Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do. Of all the actions in this report, it raises the score most for the work it takes: about 8 points for medium effort. The next survey will show the change in the score.

Based on: the ranked actions in Top priorities, by score gain and effort

Architecture — module dependency graph

Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways — a layering smell or cycle. A clean layered graph has none.

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

35 modules, with 53 dependencies between them. Every module uses only modules listed above it, so there are no loops.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →	2 atomic_core.clock	4 atomic_core.metrics	5 atomic_core.node	6 atomic_core.snapshot	7 atomic_core.types	8 atomic_feed.connector	9 atomic_transport.protocol	11 atomic_core.event	16 atomic_orderbook.book	17 atomic_risk.limits	18 atomic_strategy.inventory	20 atomic_strategy.toxicity	21 atomic_transport.mesh	24 atomic_execution.state_machine	27 atomic_node.config	28 atomic_node.recovery	29 atomic_replay.log	31 atomic_strategy.traits	33 atomic_strategy.engine
1 atomic_bus.ring
2 atomic_core.clock
3 atomic_core.error
4 atomic_core.metrics
5 atomic_core.node
6 atomic_core.snapshot
7 atomic_core.types
8 atomic_feed.connector
9 atomic_transport.protocol
10 dashboard
11 atomic_core.event			1		31
12 atomic_feed.binance						2
13 atomic_hotpath					3
14 atomic_node.bin.generate_backtest_data					1
15 atomic_node.dashboard		1
16 atomic_orderbook.book					5
17 atomic_risk.limits					5
18 atomic_strategy.inventory					1
19 atomic_strategy.microprice					2
20 atomic_strategy.toxicity					1
21 atomic_transport.mesh							1
22 atomic_bus.sequencer	1							1
23 atomic_execution.simulator					10			2
24 atomic_execution.state_machine				1	12			1
25 atomic_feed.gateway					9			1
26 atomic_feed.normalizer					3	1		1
27 atomic_node.config			1		1					1
28 atomic_node.recovery				2				1
29 atomic_replay.log								1
30 atomic_router.router					11				1
31 atomic_strategy.traits								1
32 atomic_replay.player								1									1
33 atomic_strategy.engine					1			1	1									1
34 atomic_strategy.market_maker					2			1			1	1						3
35 atomic_node.main		1			2		1						1	2	1	1	1		1

Uses a module listed above itPart of a loopThe module itself

At a glance — Code Health · 64% · Adequate · gated by X4 ·

The Good

D1 · Rust Cyclomatic Complexity 7.5 D3 · Rust God Classes 9.5 D4 · Rust Code Duplication 9.4 D17 · Rust Explicit Debt 10.0 X1 · Repo Async correctness 10.0 X21 · Repo Side-effecting pattern guard 10.0 X27 · Repo Collection changed while being enumerated 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X30 · Repo Support guard that admits what it rejects 10.0

The Ugly

D2 · Rust Cognitive Complexity 4.3 X4 · Repo Structured logging 2.0

At a glance — Architecture · 95% · Exemplary ·

The Good

D5 · Rust Coupling 8.0 D6 · Rust Cohesion (LCOM4) 10.0 D26 · Rust Project Cohesion 10.0 D35 · Rust Change Coupling 10.0 AX10 · Repo Code composition 9.2 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 AX9 · Repo CQS / query purity 10.0

The Bad

D22 · Rust Internal API Consistency 6.0

At a glance — Maturity · 61% · Adequate · gated by M2 ·

The Good

D15 · Rust Churn × Complexity Hotspots 7.9 D19 · Rust Documentation Quality 8.0 D21 · Rust Naming Consistency 10.0 M1 · Repo Documentation (README) 8.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0

The Ugly

D20 · Rust ADR Quality 0.0 M2 · Repo Architecture documentation 2.0

At a glance — Readiness · 54% · Adequate · gated by P7 ·

The Good

D9 · Rust Test Distribution 9.3 D12 · Rust Dependency Hygiene 9.3 D13 · Rust Secret Scanning 10.0 D14 · Rust License Compliance 10.0 P1 · Repo CI/CD gates 8.0 P2 · Repo Observability 7.0

The Bad

P10 · Repo Library API & versioning 6.0 P3 · Repo Security & performance tooling 5.0 P6 · Repo Release Hygiene 5.0

The Ugly

P7 · Repo Outbound HTTP resilience 3.0

At a glance — Security · 42% · Weak · gated by C2 ·

The Good

D28 · Rust Secrets (history) 10.0 D29 · Rust Static Analysis (SAST) 10.0 D43 · Rust Malicious Dependencies 10.0 X14 · Repo Bypassable address classification 10.0

The Bad

D30 · Rust Dependency Vulnerabilities 6.6 S1 · Repo Web-Security Posture 6.0

The Ugly

C2 · Repo Access Controls 0.0 X15 · Repo Unvalidated length from an untrusted reader 3.5

At a glance — Event Sourcing · 100% · Exemplary ·

The Good

ES1 · Repo Fold determinism 10.0 ES2 · Repo Immutable events 10.0

At a glance — Accessibility · 56% · Adequate ·

The Good

AC2 · Repo Forms & labels 10.0

The Bad

AC3 · Repo Page structure 5.4 AC6 · Repo Visual & motion safety 5.5

The Ugly

AC7 · Repo A11y enforcement 4.0

At a glance — Performance · 91% · Exemplary ·

The Good

PF1 · Repo Benchmark discipline 8.5 PF3 · Repo Async & latency hygiene 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP category	Findings	Severity
A03:2025 — Software Supply Chain Failures	12	High / Critical
A05:2025 — Injection	11	High / Critical

Roadmap

First, implement a global authentication guard with explicit public opt-outs and named role rules to protect all endpoints by default. Second, enforce security response headers such as Content-Security-Policy and X-Content-Type-Options on every server response to harden the web security posture. Third, resolve the three high-severity dependency vulnerabilities identified in the lock file to eliminate known risks. Finally, establish architectural decision records to document key design choices and configure request timeouts with retry logic for all outbound HTTP calls to ensure system resilience.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.	+7.7 pts	Medium	Access Controls
Set security response headers on what the server sends — actix-web's `DefaultHeaders::new().add((header::X_CONTENT_TYPE_OPTIONS, "nosniff"))`, tower-http's `SetResponseHeaderLayer::overriding(…)` on an axum router, or keep Rocket's default `Shield` — with `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy on every response.	+5.6 pts	Medium	Web-Security Posture
Resolve the 3 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3).	+2.3 pts	Low	Dependency Vulnerabilities
Resolve the 1 No ADRs found finding(s) in ADR Quality.	+1.4 pts	Low	ADR Quality
Resolve the 2 Hotspot finding(s) in Churn × Complexity Hotspots — start with main.rs, limits.rs.	+1.0 pts	Medium	Churn × Complexity Hotspots
Resolve the 3 Medium advisory (unsound) finding(s) in Dependency Vulnerabilities — start with REDACTED (3).	+1.0 pts	Low	Dependency Vulnerabilities
Resolve the 3 Medium vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (3).	+1.0 pts	Low	Dependency Vulnerabilities
Give every client a whole-request bound: `reqwest::Client::builder().timeout(Duration::from_secs(10))` (never `reqwest::get` or `Client::new()`, which have none), ureq's `timeout_global`, or wrap the call in `tokio::time::timeout`; add retry with back-off (`reqwest-retry`'s `RetryTransientMiddleware`, `backoff`) around dependencies that fail.	+1.4 pts	Medium	Outbound HTTP resilience

File quality

Per-file score 0–10 — a quality signature. Of 12 files carrying findings, judged against the Production bar: 17% slop · 41% mixed · 42% near-clean.

File	Score	Band	Worst signal
REDACTED	0.2	Slop	Dependency Vulnerabilities: High CVE: REDACTED
REDACTED	2.3	Slop	Static Analysis (SAST): High: REDACTED
crates/atomic-node/src/main.rs	7.0	Mixed	Cyclomatic Complexity: atomic_node::main (cyclomatic 125)
dashboard/index.html	7.2	Mixed	Cyclomatic Complexity: index.html.updateTopbar (cyclomatic 20)
crates/atomic-feed/src/gateway.rs	7.2	Mixed	Cognitive Complexity: ExecutionGateway::start_user_data_stream (cognitive 24)
crates/atomic-execution/src/simulator.rs	7.4	Mixed	Cyclomatic Complexity: SimulatedExchange::submit_order (cyclomatic 16)
crates/atomic-core/src/types.rs	7.8	Mixed	Code Duplication: Duplicated block (6 lines × 2)
crates/atomic-feed/src/binance.rs	8.5	Near-clean	Cognitive Complexity: BinanceConnector::connect (cognitive 29)
crates/atomic-risk/src/limits.rs	8.5	Near-clean	Cognitive Complexity: RiskEngine::check_order (cognitive 19)
crates/atomic-strategy/src/market_maker.rs	8.5	Near-clean	Cognitive Complexity: MarketMaker::on_event (cognitive 19)
crates/atomic-router/src/router.rs	8.5	Near-clean	Cognitive Complexity: SmartOrderRouter::route_best_venue (cognitive 17)
crates/atomic-node/src/dashboard.rs	8.5	Near-clean	Code Duplication: Duplicated block (5 lines × 2)

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 14

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 59

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 63

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 23

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 51 of 55 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 4 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 55 dimensions across the health lenses

D1D2D3D4D5D6D9D12D13D14D15D17D19D20D21D22D26D28D29D30D35D43AC2AC3AC6AC7AX10AX3AX4AX9C2ES1ES2M1M2M3M4P1P10P2P3P6P7PF1PF3S1X1X14X15X21X27X28X29X30X4

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 105 of 136 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
Watchdog duplication detector (in-process)	Code duplication	1.0.0	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.400	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.400	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a1609b-9328-75a6-8f4c-f16285626be1.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.rs) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs) and this repository declares a Cargo test suite (repository root, 18 test files), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
D15 Churn × Complexity Hotspots — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Git history depth insufficient — this repository has 24 commit(s), too few for a reliable trend signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.
D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-contributor repository — bus factor is not applicable (1 contributor(s) across 24 commit(s) sampled, automation and bot accounts excluded). Concentration needs a team to concentrate: with one contributor there is nobody to spread the knowledge to, so there is nothing here for the owner to act on.
D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
D34 Knowledge Freshness — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Too few commits to judge knowledge freshness (24 commit(s) sampled).
D35 Change Coupling — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Git history depth insufficient — this repository has 24 commit(s), too few for a reliable change-coupling signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.
D44 Platform End-of-Life — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via ToolchainServer (crates/atomic-node). the service did not build — `cargo build --locked --bin 'atomic-node'` exited 101: libatomic_hotpath-14226530bd01476d.rlib rust-lld: error: undefined symbol: hp_on_trade >>> referenced by lib.rs:201 (crates/atomic-hotpath/src/lib.rs:201) >>>…; runtime evidence skipped (launch chosen because 'axum' dependency in crates/atomic-node/Cargo.toml, binary 'atomic-node').
GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Rust, c, cpp is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Rust, c, cpp is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, TypeScript/JavaScript, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded, and this repository's C, C++, Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X23 Unguarded diagnostic materialisation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart and Ruby source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart or Ruby was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X26 Unsynchronised callback handoff — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, Kotlin, Scala, Go, Swift, Python and Ruby source only, and no C# was loaded, no Java, Kotlin, Scala, Go, Swift, Python or Ruby was found, and this repository's C, C++ is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go and JavaScript/TypeScript source only, and no C# was loaded and no PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go, JavaScript or TypeScript was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X4 Structured logging — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 78 further occurrence(s) are not listed individually; the score already reflects all 118.
X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's C, Cpp, Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D22 Internal API Consistency: API-surface coherence is an LLM judgement over a sample of the public surface — consistency of intent across the whole API is approximated, not exhaustively verified.
D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
AC2 Forms & labels: Label association is read from static markup — a label wired up at runtime (JS-set aria-labelledby, framework-injected ids) reads as missing, a present label says nothing about whether its text is correct. A known UI-library field component (e.g. a JSX <TextField>) is now checked conservatively — flagged only when it carries NO label/aria-label/aria-labelledby/id/name — but wrapper/context-labelled libraries (Chakra/Radix FormControl+FormLabel) aren't statically visible (possible false positive) and non-JSX lowercased components are still skipped. A click handler on a plain element is now asked for a name too (it is a control the author declared), but the subtree test that answers it is deliberately generous: any DYNAMIC text expression in the subtree counts as a name, so an icon chosen by a ternary ({cond ? <IconA/> : <IconB/>}) reads as named, and a glyph component from a library the icon-import list does not know still names its parent. A clean result is "no unlabelled control found", not a labelling proof.
AC3 Page structure: Page structure is read from the static markup tree — landmarks, headings and lang injected at runtime aren't seen, heading ORDER is checked structurally (not against the rendered visual hierarchy), and lang/title/main fire only on full documents, never partials, and the data-table check sees header-cell presence (a <th> exists), not whether each header correctly associates with its cells. Static readiness, not conformance.
AC6 Visual & motion safety: Contrast and motion safety are PARTIAL by construction — literal colours (hex/rgb/hsl/named) in inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS top-level declarations are read (same-rule/same-element colour+background pairs only); computed/runtime/theme colour, external-CDN stylesheets, CSS-in-JS dynamic (${…}) and nested-selector colours, cross-element pairs and image contrast stay out of reach, so a clean result is bounded by what the static CSS itself shows.
AC7 A11y enforcement: Enforcement is scored from in-repo config/CI evidence only — an a11y gate enforced in external tooling with no in-repo trace can't be credited, and a configured linter is presence, not proof the rules actually run or block a merge.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (4): D19, D21, D22, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity7.5 / 10Strong✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.5 / 10 · rule-coverage 100% · ceiling Prevented

4 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was atomic_node::main at 125.

atomic_node::main (cyclomatic 125) · ×2crates/atomic-node/src/main.rs:95

index.html.updateTopbar (cyclomatic 20)dashboard/index.html:633

SimulatedExchange::submit_order (cyclomatic 16)crates/atomic-execution/src/simulator.rs:182

What to do

Bring the 1 body over 60 down to 60 or less in Cyclomatic Complexity — start with atomic_node::main (cyclomatic 125). — Refactoring it lifts Cyclomatic Complexity from 7.5 to about 8.2/10.
Enforce Cyclomatic Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D2 · Cognitive Complexity4.3 / 10Weak✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 4.3 / 10 · rule-coverage 100% · ceiling Prevented

12 method(s) exceeded the cognitive complexity threshold of 15; the worst was atomic_node::main at 332.

atomic_node::main (cognitive 332) · ×2crates/atomic-node/src/main.rs:95

BinanceConnector::connect (cognitive 29)crates/atomic-feed/src/binance.rs:28

ExecutionGateway::start_user_data_stream (cognitive 24)crates/atomic-feed/src/gateway.rs:339

index.html.onOrder (cognitive 24)dashboard/index.html:790

RiskEngine::check_order (cognitive 19)crates/atomic-risk/src/limits.rs:104

+ 6 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Bring the 2 bodies over 30 down to 30 or less in Cognitive Complexity — start with atomic_node::main (cognitive 332), atomic_node::run_backtest (cognitive 96). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 2 together lifts Cognitive Complexity from 4.3 to about 8.0/10, projected with the scoring formula itself and assuming each lands exactly at 30; a cleaner split scores higher.
Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D3 · God Classes9.5 / 10Stronggated by 3 serious findings✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Prevented

3 over-large unit(s) detected — types, modules or files that carry too much.

FunctionTooLong: atomic_node::main · ×2crates/atomic-node/src/main.rs:95

FileTooLong: src/main.rscrates/atomic-node/src/main.rs

What to do

Resolve the 2 FunctionTooLong finding(s) in God Classes — start with main.rs (2). — One of this dimension's main actionable groups (2 warning-level).
Resolve the 1 FileTooLong finding(s) in God Classes — start with main.rs. — One of this dimension's main actionable groups (1 warning-level).
Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D4 · Code Duplication9.4 / 10Stronggated by 12 serious findings✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.4 / 10 · rule-coverage 100% · ceiling Verified

12 duplicated block group(s) detected.

Duplicated block (15–16 lines × 2) · ×2crates/atomic-feed/src/gateway.rs:228

Duplicated block (6 lines × 2) · ×2crates/atomic-core/src/types.rs:256

Duplicated block (17 lines × 2)crates/atomic-node/src/main.rs:1483

Duplicated block (4–15 lines × 3)crates/atomic-node/src/main.rs:814

Duplicated block (12 lines × 3)crates/atomic-node/src/main.rs:586

+ 5 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 2 Duplicated block (15–16 lines × 2) finding(s) in Code Duplication — start with gateway.rs (2). — One of this dimension's main actionable groups (2 warning-level).
Resolve the 2 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with types.rs (2). — One of this dimension's main actionable groups (2 warning-level).
Resolve the 1 Duplicated block (17 lines × 2) finding(s) in Code Duplication — start with main.rs. — One of this dimension's main actionable groups (1 warning-level).
Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D5 · Coupling8.0 / 10Strong✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 8.0 / 10 · rule-coverage 100% · ceiling Prevented

12 production modules (Cargo), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 3 module(s) off the main sequence.

Off the main sequence: atomic-core · ×3

What to do

Resolve the 3 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (3 warning-level).
Enforce Coupling in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D6 · Cohesion (LCOM4)10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 29 classes have LCOM4 above 3.

✓ On the Gold path — maintain.

Detailed fixes: d6_recommendation.md.

Do you agree with this assessment?

D9 · Test Distribution9.3 / 10Exemplary✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Documented

92 test methods: 85 unit, 2 integration, 0 BDD, 5 e2e. The Rust suite contributes 92 `#[test]` function(s) across 18 file(s) declaring at least one; its unit/integration split is Cargo's own — 1 of those file(s) are integration-test targets under a crate's tests/ directory, and the rest are #[test] functions compiled into the crate they test.

✓ On the Gold path — maintain.

Detailed fixes: d9_recommendation.md.

Do you agree with this assessment?

D12 · Dependency Hygiene9.3 / 10Exemplary✓ Tool-verified

What it measures: Whether dependencies are current, secure, and not bloated.

Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (saturating for vulnerabilities, capped-linear for deprecation/outdated) per KLoC. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Verified

14 outdated, 0 yanked direct Cargo dependencies. Only DIRECT edges are graded: a transitive crate cannot be moved past what its parent's requirement admits, so reporting one would be advice its owner cannot take. A newer release is reported only where this repository's OWN requirement already admits it, so the remedy is `cargo update` and never a manifest edit — which means a release outside the declared range is deliberately NOT charged, because a written-down constraint is a decision rather than a defect. Note that a bare requirement is a CARET, and for a 0.x crate its ceiling is the minor. Whether any crate is UNMAINTAINED is not graded — crates.io publishes no maintenance status, and release age does not stand in for one. Known CVEs in this dependency graph are D30's question, read from REDACTED there.

Outdated: async-trait · ×14

✓ On the Gold path — maintain.

Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D14 · License Compliance10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 307 shipped crate(s) use a banned license. Licences were resolved from crates.io over the crates a consumer compiles — this repository's REDACTED closed over its manifests' `[dependencies]` and `[build-dependencies]`. Crates it asks for ONLY under `[dev-dependencies]` are excluded: they are not compiled by anything that depends on this repository. This repository publishes itself under MIT, which is its own choice and is not judged here.

✓ On the Gold path — maintain.

Detailed fixes: d14_recommendation.md.

Do you agree with this assessment?

D15 · Churn × Complexity Hotspots7.9 / 10Strong✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 7.9 / 10 · rule-coverage 100% · ceiling Documented

Top hotspots: crates/atomic-node/src/main.rs (8×125=1000); crates/atomic-risk/src/limits.rs (4×15=60)

Hotspot: crates/atomic-node/src/main.rs · ×2crates/atomic-node/src/main.rs:95

What to do

Resolve the 2 Hotspot finding(s) in Churn × Complexity Hotspots — start with main.rs, limits.rs. — One of this dimension's main actionable groups (2 warning-level).

Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D17 · Explicit Debt10.0 / 10Exemplary○ Nothing flagged

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 deducted task-comment markers across 8427 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

✓ On the Gold path — maintain.

Detailed fixes: d17_recommendation.md.

Do you agree with this assessment?

D19 · Documentation QualityStrong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The repository's single README is a comprehensive root-level overview of the project: it states what ATOMIC MESH is and its performance goals (sub-microsecond strategy compute time), shows the license badge with a legal link, and describes the architecture in an outlineable diagram. It also includes a disclaimer that this is a research showcase not production-ready trading software.

What to do

Improve Documentation Quality — currently 8.0/10. — The repository's single README is a comprehensive root-level overview of the project: it states what ATOMIC MESH is and its performance goals (sub-microsecond strategy compute time), shows the license badge with a legal link, and describes the architecture in an outlineable diagram. It also includes a disclaimer that this is a research showcase not production-ready trading software.

Detailed fixes: d19_recommendation.md.

Do you agree with this assessment?

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D22 · Internal API ConsistencyAdequate◐ Sampled · advisory

What it measures: Whether the internal API surface is consistent and coherent.

Method: Judged by language model at low temperature over a sample of the public API surface (IsPackable or .Contracts types). Sampled, advisory; confidence discounted by model uncertainty.

Maturity: Documented → Verified → Prevented · effective Adequate / 10 · rule-coverage 100% · ceiling Verified

5 API inconsistencies across a 400-member sample of 96 exposed types.

Inconsistent iterator/consumer semantics for sequential data. `EventSequencer` uses `drain` (implying removal/consumption) and `peek` (read-only). `ReplayPlayer` uses `next` (consumption) and `peek` (read-only). The naming `drain` vs `next` is confusing when both serve the role of advancing the cursor and returning the current item.

Ambiguous naming for sequence generation. `EventSequencer.sequence` takes an event and returns a u64 (likely the assigned sequence number), while `SequenceGenerator.next` returns a u64 (the next sequence number). It is unclear if `sequence` is a verb (assigning) or a noun (fetching). Furthermore, `EventSequencer` has `current_seq()` while `SequenceGenerator` has `peek()`. `peek` usually implies looking at the *next* value without consuming, whereas `current_seq` implies the *last* or *current* value. This creates confusion about whether the API exposes the next available ID or the last assigned ID.

Inconsistent error handling for empty/failed operations. `SpscRing.try_pop` returns `T` directly (implying it never fails or panics on empty, or `T` is an Option/Result wrapper not shown but implied by 'try'). `SpscRing.try_push` returns `Result`. `EventSequencer.drain` and `ReplayPlayer.next` return `Event` directly. If `try_pop` can fail, it should return `Result<T>` or `Option<T>` to match `try_push`. If `drain`/`next` can fail (e.g., empty), they should also return `Result` or `Option`. The mix of direct returns and Result types for similar 'get next item' operations is inconsistent.

Inconsistent return types for collection queries. `open_orders` returns `LiveOrder` (singular) but implies a collection. `open_order_ids` returns `OrderId` (singular). `stale_order_ids` returns `OrderId` (singular). These methods likely return collections (Vec/HashMap) but are named and typed as if returning a single item. This is a critical API design flaw.

Inconsistent return types for similar queries. `OrderBook.best_bid()` returns a `Level` (price + qty), while `HotPathEngine.best_bid()` returns a `Price`. While the domains are distinct (OrderBook vs HotPathEngine), the semantic intent is the same (get best bid). Users must know which type to use based on the engine. If `HotPathEngine` is a simplified view, it should be documented, but the inconsistency in 'best' accessors is notable.

What to do

Resolve the 1 Inconsistent iterator/consumer semantics for sequential data.… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Ambiguous naming for sequence generation. `EventSequencer.sequence`… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Inconsistent error handling for empty/failed operations.… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d22_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 13 build units (Cargo) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)10.0 / 10Adequategated by 11 critical findings○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

11 finding(s): 0 critical, 11 high, 0 medium, 0 low. 11 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens.

REDACTED

What to do

No action in Static Analysis (SAST) — all 11 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (11 issue-level, 0 of them charged here).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D30 · Dependency Vulnerabilities6.6 / 10Adequate✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 6.6 / 10 · rule-coverage 100% · ceiling Documented

12 finding(s): 0 critical, 3 high, 8 medium, 1 low.

REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 3 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
Resolve the 3 Medium advisory (unsound) finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 warning-level).
Resolve the 3 Medium vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 warning-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AC2 · Forms & labels10.0 / 10Exemplary○ Nothing flagged

Other · Accessibility — Whether form controls have a programmatic label (an associated label, aria-label or aria-labelledby), buttons have text, links have an accessible name, a click handler on a plain element names the control it declares, fieldsets have a non-empty legend, known UI-library field components carry a label prop, and a placeholder isn't used as the only label. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: inputs/selects/textareas checked for an associated label[for]/wrapping label/aria-label/aria-labelledby (per document), buttons for accessible text, fieldsets for a legend; placeholder-only labelling flagged. Deterministic, hard fact per control.

Coverage: Population: form controls, buttons, links, fieldsets and known UI-library field components in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and spread/dynamic-attribute elements are skipped, so a control whose label arrives through a spread or a runtime expression is deliberately not judged. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

Do you agree with this assessment?

AC3 · Page structure5.4 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether pages declare a language (well-formed BCP-47) and a non-empty title, expose exactly one main landmark and a sane heading order with non-empty headings, keep zoom enabled, title their iframes, give data tables header cells, and avoid meta-refresh. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: html lang, document <title>, a main landmark and heading order on full documents only, plus zoom-disabling viewports, untitled iframes and meta-refresh anywhere. Deterministic, per structural checkpoint.

Coverage: Population: the PARSED MARKUP documents (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx). The page-level checks — lang, title, single main landmark — fire ONCE PER FULL DOCUMENT (an <html> root) and never on a partial or component fragment, so a repo of fragments is assessed only on the per-element checks (heading order, table headers, iframe titles, meta-refresh, zoom). Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>. — dashboard/index.html:2

What to do

Declare <html lang>, a document <title> and a <main> landmark, keep headings in order, leave zoom enabled, title iframes and drop meta-refresh.

Do you agree with this assessment?

AC6 · Visual & motion safety5.5 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether focus outlines aren't removed without a replacement, motion respects prefers-reduced-motion, and literal CSS colour pairs meet contrast — PARTIAL: inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS literals are read (hex/rgb/hsl/named), never computed/runtime/external-CDN colour. Static markup readiness, not a WCAG conformance claim.

Method: Static markup/CSS scan: inline outline:none/0, literal inline colour/background contrast against the 4.5:1 AA floor, and <style>-block animation without a prefers-reduced-motion guard. Deterministic but PARTIAL — only inline styles and in-repo CSS literals are visible.

Coverage: Population: styled elements in the PARSED MARKUP files (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx), plus in-repo <style> blocks, in-repo .css files and CSS-in-JS literals. Colour contrast is computed from LITERAL colour pairs only (hex/rgb/hsl/named, including var() tokens and Tailwind neutral utilities) — computed, runtime-themed and external-CDN colour is never resolved, so this is a partial read of contrast by construction. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

`.risk-card .bar-fill` moves (`transition: width .3s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce. — dashboard/index.html:159
`.toast` moves (`animation: fadeInOut 3s ease-in-out forwards`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce. — dashboard/index.html:182
`.strat-toggle::after` moves (`transition: left .2s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce. — dashboard/index.html:217
`.pnl-bar` moves (`transition: height .3s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce. — dashboard/index.html:232

What to do

Keep a visible focus style (don't remove the outline without a replacement), guard animation with prefers-reduced-motion, and raise low-contrast colour pairs to at least 4.5:1.

Do you agree with this assessment?

AC7 · A11y enforcement4.0 / 10Weak✓ Tool-verified

Other · Accessibility — Whether accessibility is ENFORCED in the toolchain — an accessibility checker configured over the markup (an a11y lint rule set, e.g. eslint-plugin-jsx-a11y or vuejs-accessibility where the project lints JavaScript) and an automated accessibility assertion wired into tests or CI (axe/pa11y/Lighthouse or an equivalent) — on the Documented→Verified→Prevented ladder.

Method: Repo config/CI scan: an accessibility checker configured over the markup (an a11y lint rule set such as eslint-plugin-jsx-a11y / vuejs-accessibility where JavaScript is linted) and an automated accessibility assertion in tests or CI (axe/pa11y/Lighthouse or equivalent), graded on the Documented→Verified→Prevented rungs. Deterministic, presence/rung detection.

Coverage: Population: the repository's own tooling configuration — lint config, test and CI files — NOT the markup. It is read for a configured accessibility checker and an automated accessibility assertion (axe/pa11y/Lighthouse, or a native-toolkit equivalent), and it credits an INVOCATION, never a mention: a licence filename, an import comment or a doc reference earns no rung. Enforcement configured entirely outside the repository leaves no evidence here and cannot be credited.

No accessibility enforcement found — no automated accessibility check runs over the HTML your app renders. Assert the accessibility invariants over that HTML in the test suite you already have (parse the output and assert, or drive a browser), and gate that test in CI so a regression blocks the merge. What was searched, so you can tell an absence from a miss: the 1 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.

What to do

Enforce accessibility in the test suite you already have: assert the accessibility invariants over the HTML your app renders — parse the rendered output in an existing test, or drive a real browser from one — and gate that test in CI so a regression blocks the merge.

Do you agree with this assessment?

AX10 · Code composition9.2 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.

Do you agree with this assessment?

AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

Do you agree with this assessment?

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

Do you agree with this assessment?

AX9 · CQS / query purity10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.

Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.

Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.

Do you agree with this assessment?

C2 · Access Controls0.0 / 10Critical✓ Tool-verified

Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.

Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.

This repository serves requests — a server (axum::serve) (crates/atomic-node/src/dashboard.rs:174) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected. — crates/atomic-node/src/dashboard.rs:174

What to do

Protect endpoints by default-deny: a global authentication guard or middleware with explicit public opt-outs, or a guard on every route, plus named role/permission rules for what an authenticated caller may do.

Do you agree with this assessment?

ES1 · Fold determinism10.0 / 10Exemplary✓ Tool-verified

Other · Event Sourcing — Whether the recovery-replay fold is deterministic — state derived purely from each event's own fields, no clock/random/IO on the replay path.

Method: Roslyn syntax scan (event-sourcing gated): Apply/When folds checked for forbidden tokens (DateTime.Now, Guid.NewGuid, Random, IO), stripped of comments/strings. Deterministic, hard fact per fold.

Do you agree with this assessment?

ES2 · Immutable events10.0 / 10Exemplary✓ Tool-verified

Other · Event Sourcing — Whether domain events stay immutable (private fields, set once) rather than carrying mutable state.

Method: Roslyn scan (event-sourcing gated): persisted events checked for public setters; immutability verified per property/field. Deterministic, hard fact.

Do you agree with this assessment?

M1 · Documentation (README)8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a README to the 12 of 12 project(s) that lack one — worth up to 2 pts.

Do you agree with this assessment?

M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.

Do you agree with this assessment?

M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Do you agree with this assessment?

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

Do you agree with this assessment?

P1 · CI/CD gates8.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

A CI pipeline exists but no build step was matched — changes may merge without the build ever running. A build step may be invoked directly as a command, or declared as a task that a runner named in the pipeline resolves.

What to do

Add an explicit build step to your CI pipeline — your stack's own build command, or, if the pipeline delegates to a task runner, a build task that runner executes in CI — so every change is built before merge.

Do you agree with this assessment?

P10 · Library API & versioning6.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.

Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.

89/108 types (82%) declared in the published library are public. For a library, every public type is a stability contract — keep implementation types off the surface and expose only the intended API.

What to do

Keep implementation types off the public surface (Rust: `pub(crate)`, or keep the module private) so internals can change without breaking consumers.

Do you agree with this assessment?

P2 · Observability7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

What to do

Consider OpenTelemetry tracing/metrics (opentelemetry with tracing-opentelemetry) and a health-check endpoint (a /health route on your axum/actix router) for operability.

Do you agree with this assessment?

P3 · Security & performance tooling5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.

Do you agree with this assessment?

P7 · Outbound HTTP resilience3.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether outbound HTTP calls are wrapped in resilience (retry/timeout/circuit-breaker) so a failing dependency doesn't cascade.

Method: Source scan: outbound HTTP clients and what bounds them — resilience handlers (Polly, AddStandardResilienceHandler) on .NET; on Go, the JVM, Python, JavaScript/TypeScript, Ruby, PHP, Rust, Elixir, Swift, Dart and Erlang, a timeout, deadline, retry or breaker beside each call, or a process-wide client default (a framework-wide deadline such as Drupal core's, Laravel's or actix's awc counts). Exhaustive, deterministic.

`reqwest::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout. — crates/atomic-feed/src/gateway.rs:113

What to do

Give every client a whole-request bound: `reqwest::Client::builder().timeout(Duration::from_secs(10))` (never `reqwest::get` or `Client::new()`, which have none), ureq's `timeout_global`, or wrap the call in `tokio::time::timeout`; add retry with back-off (`reqwest-retry`'s `RetryTransientMiddleware`, `backoff`) around dependencies that fail.

Do you agree with this assessment?

PF1 · Benchmark discipline8.5 / 10Strong✓ Tool-verified

Readiness · Performance — Whether the code protects its performance with benchmarks — a benchmark suite, allocation/memory measurement, and (ideally) a CI gate. Presence is credited as a bonus, never a deduction.

Method: Repo + source scan: BenchmarkDotNet referenced (csproj/source), [Benchmark]/[MemoryDiagnoser] attribute counts, and a benchmark step in CI; off .NET, the same ladder over Go testing.B, Rust criterion/#[bench]/divan, JMH/kotlinx-benchmark, pytest-benchmark/asv/pyperf, tinybench/mitata/vitest bench/benchmark.js and Swift package-benchmark — scored as a bonus ladder (absence is neutral, never a deduction). Deterministic, presence detection.

Do you agree with this assessment?

PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

Do you agree with this assessment?

S1 · Web-Security Posture6.0 / 10Adequate✓ Tool-verified

Other · Security — Read from this repository's Rust source: cryptographic hygiene (weak hash or cipher, key material fixed in the source) and outbound TLS (certificate validation, protocol version) — facts about code that hold whether or not it serves anything itself. This repository serves HTTP itself (`axum::serve(` (crates/atomic-node/src/dashboard.rs:174)), so its Rust source was also read for the server controls: TLS served or HSTS set, security response headers, cookie flags and inbound validation — each credited where its Rust spelling appears in production source, not proven on every route. A Rocket 0.5 application is credited the headers Rocket's default `Shield` sends unless it attaches its own, and its cookie jar's SameSite=Strict default; a session middleware its default cookie flags.

Method: Roslyn plus filesystem scan: HSTS/security headers, secure cookies, input validation, middleware order, weak crypto (MD5/SHA1/DES); HTTPS-metadata context-aware. On a repository with no .NET source it reads JavaScript/TypeScript, Dart, Ruby, Scala, Rust or Elixir source itself (test, vendored, generated and minified paths not) for the arms that hold whether or not the code serves HTTP: a weak hash or cipher, key material fixed in the source, a TLS client that accepts any certificate, and (JavaScript/TypeScript, Ruby, Scala, Rust and Elixir) an obsolete TLS version; the server controls are not assessed there, and a Dart, Ruby, Scala, Rust or Elixir repository that serves no HTTP of its own is N/A on them. Deterministic.

None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Rust server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: `axum::serve(` (crates/atomic-node/src/dashboard.rs:174).
No handler of this repository's Rust server answers 400, 413 or 422 (`StatusCode::BAD_REQUEST`, `HttpResponse::BadRequest()`, `Status::BadRequest`, tonic `Status::invalid_argument`), and nothing declares validation — no `validator`/`garde` derive, no body limit (`DefaultBodyLimit::max`, `RequestBodyLimitLayer`, `JsonConfig::default().limit(…)`, Rocket `Limits`) — nothing shows inbound requests being checked, and refused, before a handler acts on them. A check that answers its failure with 200 and an error body is not seen. (−2.0 on this card.) The server: `axum::serve(` (crates/atomic-node/src/dashboard.rs:174).

What to do

Set security response headers on what the server sends — actix-web's `DefaultHeaders::new().add((header::X_CONTENT_TYPE_OPTIONS, "nosniff"))`, tower-http's `SetResponseHeaderLayer::overriding(…)` on an axum router, or keep Rocket's default `Shield` — with `Content-Security-Policy`, `X-Content-Type-Options` and a frame policy on every response.
Validate what the server reads from a request — path, query, headers, body size and shape — and answer what fails with 400 (413 for an oversized body) before a handler acts on it: derive `validator::Validate` (or `garde::Validate`) on the request types and reject with `StatusCode::BAD_REQUEST`, and cap bodies with `DefaultBodyLimit::max`/`RequestBodyLimitLayer` or actix's `JsonConfig::default().limit(…)`.

Do you agree with this assessment?

X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

Do you agree with this assessment?

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X15 · Unvalidated length from an untrusted reader3.5 / 10Weak✓ Tool-verified

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

`len` is read from the bytes being parsed at line 79 (`u32::from_le_bytes`), then used to size a `vec![…; n]` at line 80 — and nowhere in its scope is `len` compared to anything, clamped, or bounded against the input that remains. Whoever wrote those bytes therefore chooses the allocation directly: it reserves the whole length before a single byte of the payload is known to exist, so a 32-bit length asks for up to 4 GiB, and an allocation the allocator refuses aborts the process with `memory allocation of … bytes failed` — an abort, not a panic, so no `catch_unwind` intercepts it and the whole process dies; a 64-bit length past `isize::MAX` panics with `capacity overflow` instead, out of a parser whose failure path was written for malformed input, not for hostile input. Bound `len` against the bytes actually remaining and a maximum the format allows before allocating. — crates/atomic-replay/src/log.rs:80

What to do

Each finding names the read that takes the length from the input and the site that spends it, and states that the value is never compared in between. Confirm from the two, then bound the length against the remaining stream before using it.

Do you agree with this assessment?

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `for` loop leaves the `RefCell` it is walking alone — safe Rust rejects a body that changes the collection its loop borrows at compile time, except through interior mutability: a `RefCell` borrowed in the loop's header stays borrowed until the loop ends, so a `borrow_mut()` of it inside the body panics with `already borrowed: BorrowMutError` and the remaining elements are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X4 · Structured logging2.0 / 10Critical✓ Tool-verified

Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.

Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.

`warn!` at line 204 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:204
`info!` at line 272 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:272
`warn!` at line 274 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:274
`error!` at line 278 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:278
`info!` at line 321 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:321
`warn!` at line 324 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:324
`error!` at line 329 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:329
`info!` at line 358 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:358
`error!` at line 381 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:381
`error!` at line 422 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:422
`info!` at line 510 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:510
`warn!` at line 528 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:528
`warn!` at line 565 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:565
`info!` at line 652 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:652
`info!` at line 658 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:658
`warn!` at line 672 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/gateway.rs:672
`info!` at line 52 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:52
`info!` at line 53 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:53
`error!` at line 71 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:71
`info!` at line 78 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:78
`error!` at line 95 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:95
`error!` at line 99 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-feed/src/binance.rs:99
`info!` at line 59 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/recovery.rs:59
`info!` at line 80 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/recovery.rs:80
`warn!` at line 115 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/recovery.rs:115
`warn!` at line 124 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/recovery.rs:124
`info!` at line 138 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. (×2) — crates/atomic-node/src/recovery.rs:138, crates/atomic-node/src/main.rs:138
`info!` at line 113 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:113
`info!` at line 115 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:115
`warn!` at line 116 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:116
`info!` at line 120 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:120
`error!` at line 131 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:131
`info!` at line 137 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:137
`info!` at line 139 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:139
`info!` at line 140 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:140
`info!` at line 141 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:141
`info!` at line 156 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:156
`warn!` at line 165 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:165
`info!` at line 178 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — crates/atomic-node/src/main.rs:178

What to do

Interpolated log message defeats structured logging

Do you agree with this assessment?

WCAG coverage — what static analysis assessed

Statically assessed 10 of 55 WCAG 2.2 Level A/AA success criteria (18%; ≈20% of the 50 WCAG 2.1 AA criteria for EN 301 549). The other 45 require runtime or manual evaluation. Partial signal only (a clean result is necessary, not sufficient; static analysis fully verifies none). This is accessibility readiness, not a conformance claim — a WCAG conformance claim requires manual evaluation (WCAG-EM 1.0).

Dimension	WCAG 2.2 A/AA criteria	Coverage
AC2 · Forms & labels	1.3.1, 3.3.2, 4.1.2	Partial signal
AC3 · Page structure	1.4.4, 2.2.1, 2.4.1, 2.4.2, 3.1.1, 4.1.2	Partial signal
AC6 · Visual & motion safety	1.4.3, 2.4.7	Partial — literal CSS only
AC7 · A11y enforcement	enforcement — no page criterion	Enforcement posture (process)

Not statically assessed — these 45 Level A/AA criteria need runtime or manual evaluation (WCAG-EM): 1.1.1, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.4.1, 1.4.2, 1.4.5, 1.4.10, 1.4.11, 1.4.12, 1.4.13, 2.1.1, 2.1.2, 2.1.4, 2.2.2, 2.3.1, 2.4.3, 2.4.4, 2.4.5, 2.4.6, 2.4.11, 2.5.1, 2.5.2, 2.5.3, 2.5.4, 2.5.7, 2.5.8, 3.1.2, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 3.2.6, 3.3.1, 3.3.3, 3.3.4, 3.3.7, 3.3.8, 4.1.3.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	64%	Adequate — gated by X4	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture	95%	Exemplary	Solid.
Maturity	61%	Adequate — gated by M2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	54%	Adequate — gated by P7	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	42%	Weak — gated by C2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Event Sourcing	100%	Exemplary	Strongest area.
Accessibility	56%	Adequate	Acceptable, with room to improve.
Performance	91%	Exemplary	Solid.

Unscored — 1 check(s) recorded observations but carry no score

These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.

D36 Supply-chain Provenance & Signing — 1 observation(s) recorded · The CI pipeline builds and tests but publishes no released artifact — no package publish, container push, GitHub release or deployment step. Supply-chain provenance, signing and SBOM attest RELEASED artifacts, so there is nothing to attest here. Add them to the release pipeline when this repo starts shipping artifacts (a published package, a container image, a deployed service or a tagged release). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.

Not evidenced — 2 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control

Not included — 63 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — No image/media element found in the parsed markup — AC1 not applicable here.
AC4 Keyboard semantics — No interactive element found in the parsed markup — AC4 not applicable here.
AC5 ARIA correctness — No ARIA usage found in the parsed markup — AC5 not applicable here.
AX1 Captive dependencies — Not applicable: Rust with no dependency-injection crate has no container to hand one lifetime's instance to another — every value is owned by the code that builds it, and the borrow checker rejects a longer-lived value keeping a borrow of a shorter-lived one.
AX2 Stateful singletons — Not applicable: Rust's compiler refuses unsynchronised shared mutation — a value shared across threads must be Sync — so the race this check looks for cannot be written.
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
AXR1 Runtime accessibility — the service did not build — `cargo build --locked --bin 'atomic-node'` exited 101: libatomic_hotpath-14226530bd01476d.rlib rust-lld: error: undefined symbol: hp_on_trade >>> referenced by lib.rs:201 (crates/atomic-hotpath/src/lib.rs:201) >>>…; runtime evidence skipped (launch chosen because 'axum' dependency in crates/atomic-node/Cargo.toml, binary 'atomic-node') This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no data at rest for these controls to protect.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over.
D10 Test Quality — ~719 lines of test source are present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included — the .rs suite was found but not re-run
D16 Bus Factor — single-contributor repository — bus factor is not applicable
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.rs), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
D34 Knowledge Freshness — too few commits to judge knowledge freshness
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (1 domain event(s); its domain events are published by services or handlers — no domain entity raises one)
ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and a call made through an inferred or generic receiver has no resolvable owner in the source. Reported as guidance rather than measured
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
PF2 Allocation hygiene — Not applicable: Rust spells out every heap allocation and makes borrowed slices (&[T], &str) its ordinary parameter types, so the allocation-aware style this card rewards elsewhere is the language's baseline rather than a rung to climb.
X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X12 Unreachable branch — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X13 Undrained process stream — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X17 Uncapped recursion over a caller-supplied document — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X19 Unrestored process-global state — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — no C# was loaded; this repository's Rust was read, and no request in it can be cancelled by a caller — a Rust request takes no token: a future is cancelled by dropping it, from outside the call (select!, a timeout, an aborted task), and reqwest, hyper and tonic take none
X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X22 Contradicted release guard — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X23 Unguarded diagnostic materialisation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X25 Inert configuration knob — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X26 Unsynchronised callback handoff — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 14 finding(s)

D29 · Static Analysis (SAST) · REDACTED

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

D30 · Dependency Vulnerabilities · High CVE · ×3

REDACTED
REDACTED
REDACTED

Serious — 59 finding(s)

AC6 · Visual & motion safety · Animation without a prefers-reduced-motion guard · ×4

Animation without a prefers-reduced-motion guard dashboard/index.html:159 — `.risk-card .bar-fill` moves (`transition: width .3s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce.
Animation without a prefers-reduced-motion guard dashboard/index.html:182 — `.toast` moves (`animation: fadeInOut 3s ease-in-out forwards`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce.
Animation without a prefers-reduced-motion guard dashboard/index.html:217 — `.strat-toggle::after` moves (`transition: left .2s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce.
Animation without a prefers-reduced-motion guard dashboard/index.html:232 — `.pnl-bar` moves (`transition: height .3s`) and nothing reads prefers-reduced-motion for it — no @media (prefers-reduced-motion) rule for this element, no reset this project loads — so a motion-sensitive user cannot turn it off (WCAG 2.3.3). Declare it under @media (prefers-reduced-motion: no-preference), or neutralise it under reduce.

D30 · Dependency Vulnerabilities · Medium advisory (unsound) · ×3

REDACTED
REDACTED
REDACTED

D30 · Dependency Vulnerabilities · Medium vulnerability · ×3

REDACTED
REDACTED
REDACTED

D5 · Coupling · Off the main sequence · ×3

Off the main sequence: atomic-core — atomic-core: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 11 project(s), so it's rigid to change.
Off the main sequence: atomic-bus — atomic-bus: abstractness 0.00, instability 0.25, distance 0.75 — zone of pain — concrete and depended on by 3 project(s), so it's rigid to change.
Off the main sequence: atomic-orderbook — atomic-orderbook: abstractness 0.00, instability 0.25, distance 0.75 — zone of pain — concrete and depended on by 3 project(s), so it's rigid to change.

D1 · Cyclomatic Complexity · atomic_node · ×2

atomic_node::main (cyclomatic 125) crates/atomic-node/src/main.rs:95 — atomic_node::main has cyclomatic complexity 125 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This file is where this pass's cyclomatic complexity CONCENTRATES: crates/atomic-node/src/main.rs holds 2 of the 4 functions over the threshold — including the worst — and 130 of the 136 points over it (96%), 26× the next-largest file (dashboard/index.html at 5). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
atomic_node::run_backtest (cyclomatic 35) crates/atomic-node/src/main.rs:1379 — atomic_node::run_backtest has cyclomatic complexity 35 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top. This file is where this pass's cyclomatic complexity CONCENTRATES: crates/atomic-node/src/main.rs holds 2 of the 4 functions over the threshold — including the worst — and 130 of the 136 points over it (96%), 26× the next-largest file (dashboard/index.html at 5). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.

D15 · Churn × Complexity Hotspots · Hotspot · ×2

Hotspot: crates/atomic-node/src/main.rs crates/atomic-node/src/main.rs:95 — crates/atomic-node/src/main.rs changed 8 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 125 in atomic_node::main at line 95. 2 of those changes were fix/bug commits, and the other 6 changed it for other reasons — this file is under both repair and feature pressure. Before the next change lands here, make sure the area it touches is under test, then split that area out of the file so the following change is smaller than this one — a file this often edited pays the complexity back every time. Counted over 2026-03-07..2026-06-05, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-03-07 20:21:09 +02:00' --until='2026-06-05 20:21:09 +02:00' --full-history --no-merges -- crates/atomic-node/src/main.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
Hotspot: crates/atomic-risk/src/limits.rs crates/atomic-risk/src/limits.rs:104 — crates/atomic-risk/src/limits.rs changed 4 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 15 in RiskEngine::check_order at line 104. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2026-03-07..2026-06-05, the 90 days ending at the analysed commit. Reproduce with `git log --since='2026-03-07 20:21:09 +02:00' --until='2026-06-05 20:21:09 +02:00' --full-history --no-merges -- crates/atomic-risk/src/limits.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.

D2 · Cognitive Complexity · atomic_node · ×2

atomic_node::main (cognitive 332) crates/atomic-node/src/main.rs:95 — atomic_node::main has cognitive complexity 332 (threshold 15). Drivers by points: if/else 91 (239 pts), loops 17 (48 pts), match/switch 18 (43 pts), boolean chains 2 (nesting depth added 204). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body. This file is where this pass's cognitive complexity CONCENTRATES: crates/atomic-node/src/main.rs holds 2 of the 12 functions over the threshold — including the worst — and 398 of the 450 points over it (88%), 28.4× the next-largest file (crates/atomic-feed/src/binance.rs at 14). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
atomic_node::run_backtest (cognitive 96) crates/atomic-node/src/main.rs:1379 — atomic_node::run_backtest has cognitive complexity 96 (threshold 15). Drivers by points: if/else 24 (64 pts), match/switch 7 (17 pts), loops 5 (15 pts) (nesting depth added 60). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body. This file is where this pass's cognitive complexity CONCENTRATES: crates/atomic-node/src/main.rs holds 2 of the 12 functions over the threshold — including the worst — and 398 of the 450 points over it (88%), 28.4× the next-largest file (crates/atomic-feed/src/binance.rs at 14). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.

D3 · God Classes · FunctionTooLong · ×2

FunctionTooLong: atomic_node::main crates/atomic-node/src/main.rs:95 — FunctionTooLong — atomic_node::main runs 837 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 737 over it, 8.37× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
FunctionTooLong: atomic_node::run_backtest crates/atomic-node/src/main.rs:1379 — FunctionTooLong — atomic_node::run_backtest runs 234 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 134 over it, 2.34× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.

D4 · Code Duplication · Duplicated block (15–16 lines × 2) · ×2

Duplicated block (15–16 lines × 2) crates/atomic-feed/src/gateway.rs:228 — crates/atomic-feed/src/gateway.rs:228-243 | crates/atomic-feed/src/gateway.rs:286-300 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (15–16 lines × 2) crates/atomic-feed/src/gateway.rs:245 — crates/atomic-feed/src/gateway.rs:245-260 | crates/atomic-feed/src/gateway.rs:302-316 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (6 lines × 2) · ×2

Duplicated block (6 lines × 2) crates/atomic-core/src/types.rs:256 — crates/atomic-core/src/types.rs:256-261 | crates/atomic-orderbook/src/book.rs:85-90 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
Duplicated block (6 lines × 2) crates/atomic-core/src/types.rs:263 — crates/atomic-core/src/types.rs:263-268 | crates/atomic-orderbook/src/book.rs:93-98 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.

AC3 · Page structure · Page without a main landmark · ×1

Page without a main landmark dashboard/index.html:2 — No <main> (or role="main") means no "skip to content" target and a weaker landmark map. Wrap the primary content in <main>.

AC7 · A11y enforcement · Accessibility enforcement below the top rung · ×1

Accessibility enforcement below the top rung — No accessibility enforcement found — no automated accessibility check runs over the HTML your app renders. Assert the accessibility invariants over that HTML in the test suite you already have (parse the output and assert, or drive a browser), and gate that test in CI so a regression blocks the merge. What was searched, so you can tell an absence from a miss: the 1 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.

C2 · Access Controls · No authorization · ×1

No authorization crates/atomic-node/src/dashboard.rs:174 — This repository serves requests — a server (axum::serve) (crates/atomic-node/src/dashboard.rs:174) — and no route guard, auth-gate middleware, global guard or imperative check that refuses a caller (401/403, an Unauthorized/Forbidden error) was found: its endpoints may be unprotected.

D1 · Cyclomatic Complexity · index.html.updateTopbar (cyclomatic 20) · ×1

index.html.updateTopbar (cyclomatic 20) dashboard/index.html:633 — index.html.updateTopbar has cyclomatic complexity 20 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.

D1 · Cyclomatic Complexity · SimulatedExchange · ×1

SimulatedExchange::submit_order (cyclomatic 16) crates/atomic-execution/src/simulator.rs:182 — SimulatedExchange::submit_order has cyclomatic complexity 16 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D2 · Cognitive Complexity · BinanceConnector · ×1

BinanceConnector::connect (cognitive 29) crates/atomic-feed/src/binance.rs:28 — BinanceConnector::connect has cognitive complexity 29 (threshold 15). Drivers by points: if/else 7 (17 pts), match/switch 3 (9 pts), loops 2 (3 pts) (nesting depth added 17). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · ExecutionGateway · ×1

ExecutionGateway::start_user_data_stream (cognitive 24) crates/atomic-feed/src/gateway.rs:339 — ExecutionGateway::start_user_data_stream has cognitive complexity 24 (threshold 15). Drivers by points: if/else 5 (13 pts), match/switch 3 (6 pts), loops 3 (5 pts) (nesting depth added 13). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · index.html.onOrder (cognitive 24) · ×1

index.html.onOrder (cognitive 24) dashboard/index.html:790 — index.html.onOrder has cognitive complexity 24 (threshold 15). Drivers by points: if/else 13 (23 pts), ternaries 1 (nesting depth added 10). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · RiskEngine · ×1

RiskEngine::check_order (cognitive 19) crates/atomic-risk/src/limits.rs:104 — RiskEngine::check_order has cognitive complexity 19 (threshold 15). Drivers by points: if/else 14 (18 pts), boolean chains 1 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.

D2 · Cognitive Complexity · MarketMaker · ×1

MarketMaker::on_event (cognitive 19) crates/atomic-strategy/src/market_maker.rs:166 — MarketMaker::on_event has cognitive complexity 19 (threshold 15). Drivers by points: if/else 8 (16 pts), boolean chains 2, match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D2 · Cognitive Complexity · index.html.updateTopbar (cognitive 19) · ×1

index.html.updateTopbar (cognitive 19) dashboard/index.html:633 — index.html.updateTopbar has cognitive complexity 19 (threshold 15). Drivers by points: boolean chains 10, if/else 7 (9 pts) (nesting depth added 2). To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.

D2 · Cognitive Complexity · SimulatedExchange · ×1

SimulatedExchange::submit_order (cognitive 18) crates/atomic-execution/src/simulator.rs:182 — SimulatedExchange::submit_order has cognitive complexity 18 (threshold 15). Drivers by points: if/else 7 (9 pts), match/switch 6 (8 pts), loops 1 (nesting depth added 4). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.

D2 · Cognitive Complexity · atomic_execution · ×1

atomic_execution::simulator::match_order (cognitive 17) crates/atomic-execution/src/simulator.rs:95 — atomic_execution::simulator::match_order has cognitive complexity 17 (threshold 15). Drivers by points: if/else 5 (10 pts), match/switch 3 (6 pts), loops 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · SmartOrderRouter · ×1

SmartOrderRouter::route_best_venue (cognitive 17) crates/atomic-router/src/router.rs:63 — SmartOrderRouter::route_best_venue has cognitive complexity 17 (threshold 15). Drivers by points: if/else 5 (10 pts), match/switch 3 (6 pts), loops 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · index.html.renderOrders (cognitive 16) · ×1

index.html.renderOrders (cognitive 16) dashboard/index.html:947 — index.html.renderOrders has cognitive complexity 16 (threshold 15). Drivers by points: if/else 9 (10 pts), boolean chains 5, ternaries 1 (nesting depth added 1). None of this is in the body itself: all 16 points belong to one function literal inside it that branches (line 950). The decisions are inside the literal, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literal's work into a named function or method at the enclosing scope and have the literal call it, then reduce whichever part then reads as the largest.

D22 · Internal API Consistency · Inconsistent iterator/consumer semantics for sequential data. `EventSequencer` uses `drain` (implying removal/consumption) and `peek` (read-only). `ReplayPlayer` uses `next` (consumption) and `peek` (read-only). The naming `drain` vs `next` is confusing when both serve the role of advancing the cursor and returning the current item. · ×1

Inconsistent iterator/consumer semantics for sequential data. `EventSequencer` uses `drain` (implying removal/consumption) and `peek` (read-only). `ReplayPlayer` uses `next` (consumption) and `peek` (read-only). The naming `drain` vs `next` is confusing when both serve the role of advancing the cursor and returning the current item. — Unify consumption methods to `next()` or `pop()`. Rename `EventSequencer.drain` to `next()` to match `ReplayPlayer` and standard iterator patterns, or rename `ReplayPlayer.next` to `drain` if the intent is strictly batch/consumption removal. Given `peek` exists in both, `next` is the standard pair. (signatures: EventSequencer.drain(): Event | EventSequencer.peek(): Event | ReplayPlayer.peek(): Event | ReplayPlayer.next(): Event)

D22 · Internal API Consistency · Ambiguous naming for sequence generation. `EventSequencer.sequence` takes an event and returns a u64 (likely the assigned sequence number), while `SequenceGenerator.next` returns a u64 (the next sequence number). It is unclear if `sequence` is a verb (assigning) or a noun (fetching). Furthermore, `EventSequencer` has `current_seq()` while `SequenceGenerator` has `peek()`. `peek` usually implies looking at the *next* value without consuming, whereas `current_seq` implies the *last* or *current* value. This creates confusion about whether the API exposes the next available ID or the last assigned ID. · ×1

Ambiguous naming for sequence generation. `EventSequencer.sequence` takes an event and returns a u64 (likely the assigned sequence number), while `SequenceGenerator.next` returns a u64 (the next sequence number). It is unclear if `sequence` is a verb (assigning) or a noun (fetching). Furthermore, `EventSequencer` has `current_seq()` while `SequenceGenerator` has `peek()`. `peek` usually implies looking at the *next* value without consuming, whereas `current_seq` implies the *last* or *current* value. This creates confusion about whether the API exposes the next available ID or the last assigned ID. — Rename `EventSequencer.sequence` to `assign` or `next`. Rename `EventSequencer.current_seq` to `last_seq` or `peek` to align with `SequenceGenerator`'s `peek` (if it returns the next value) or `next` (if it consumes). Ensure `peek` vs `next` semantics are consistent across all sequence-generating types. (signatures: EventSequencer.sequence(event: Event): u64 | SequenceGenerator.next(): u64 | SequenceGenerator.peek(): u64)

D22 · Internal API Consistency · Inconsistent error handling for empty/failed operations. `SpscRing.try_pop` returns `T` directly (implying it never fails or panics on empty, or `T` is an Option/Result wrapper not shown but implied by 'try'). `SpscRing.try_push` returns `Result`. `EventSequencer.drain` and `ReplayPlayer.next` return `Event` directly. If `try_pop` can fail, it should return `Result<T>` or `Option<T>` to match `try_push`. If `drain`/`next` can fail (e.g., empty), they should also return `Result` or `Option`. The mix of direct returns and Result types for similar 'get next item' operations is inconsistent. · ×1

Inconsistent error handling for empty/failed operations. `SpscRing.try_pop` returns `T` directly (implying it never fails or panics on empty, or `T` is an Option/Result wrapper not shown but implied by 'try'). `SpscRing.try_push` returns `Result`. `EventSequencer.drain` and `ReplayPlayer.next` return `Event` directly. If `try_pop` can fail, it should return `Result<T>` or `Option<T>` to match `try_push`. If `drain`/`next` can fail (e.g., empty), they should also return `Result` or `Option`. The mix of direct returns and Result types for similar 'get next item' operations is inconsistent. — Standardize on `Option<T>` or `Result<T, E>` for all 'try' or 'next' operations that might fail due to empty state. If `try_pop` returns `T`, it likely panics or returns a default, which is dangerous. Align `EventSequencer.drain` and `ReplayPlayer.next` to return `Option<Event>` or `Result<Event>` if they can be empty. (signatures: SpscRing.try_push(value: T): Result | SpscRing.try_pop(): T | EventSequencer.drain(): Event | ReplayPlayer.next(): Event)

D22 · Internal API Consistency · Inconsistent return types for collection queries. `open_orders` returns `LiveOrder` (singular) but implies a collection. `open_order_ids` returns `OrderId` (singular). `stale_order_ids` returns `OrderId` (singular). These methods likely return collections (Vec/HashMap) but are named and typed as if returning a single item. This is a critical API design flaw. · ×1

Inconsistent return types for collection queries. `open_orders` returns `LiveOrder` (singular) but implies a collection. `open_order_ids` returns `OrderId` (singular). `stale_order_ids` returns `OrderId` (singular). These methods likely return collections (Vec/HashMap) but are named and typed as if returning a single item. This is a critical API design flaw. — Rename these methods to `open_orders() -> Vec<LiveOrder>`, `open_order_ids() -> Vec<OrderId>`, and `stale_order_ids() -> Vec<OrderId>` to accurately reflect that they return multiple items. (signatures: ExecutionEngine.open_orders(): LiveOrder | ExecutionEngine.open_order_ids(): OrderId | ExecutionEngine.stale_order_ids(now_ns: u64, timeout_ns: u64): OrderId)

D22 · Internal API Consistency · Inconsistent return types for similar queries. `OrderBook.best_bid()` returns a `Level` (price + qty), while `HotPathEngine.best_bid()` returns a `Price`. While the domains are distinct (OrderBook vs HotPathEngine), the semantic intent is the same (get best bid). Users must know which type to use based on the engine. If `HotPathEngine` is a simplified view, it should be documented, but the inconsistency in 'best' accessors is notable. · ×1

Inconsistent return types for similar queries. `OrderBook.best_bid()` returns a `Level` (price + qty), while `HotPathEngine.best_bid()` returns a `Price`. While the domains are distinct (OrderBook vs HotPathEngine), the semantic intent is the same (get best bid). Users must know which type to use based on the engine. If `HotPathEngine` is a simplified view, it should be documented, but the inconsistency in 'best' accessors is notable. — Consider if `HotPathEngine` should also return `Level` for consistency, or if `OrderBook` should have a `best_bid_price()` method. If the distinction is intentional, ensure the naming clearly reflects the granularity (e.g., `best_bid_level` vs `best_bid_price`). (signatures: OrderBook.best_bid(): Level | OrderBook.best_ask(): Level | HotPathEngine.best_bid(): Price | HotPathEngine.best_ask(): Price)

D3 · God Classes · FileTooLong · ×1

FileTooLong: src/main.rs crates/atomic-node/src/main.rs — FileTooLong — 1263 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted). The bar is 500 significant lines; this is 763 over it, 2.53× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.

D30 · Dependency Vulnerabilities · Medium CVE · ×1

REDACTED

D30 · Dependency Vulnerabilities · Medium advisory (unmaintained) · ×1

REDACTED

D36 · Supply-chain Provenance & Signing REDACTED · ×1

REDACTED

D4 · Code Duplication · Duplicated block (17 lines × 2) · ×1

Duplicated block (17 lines × 2) crates/atomic-node/src/main.rs:1483 — crates/atomic-node/src/main.rs:1483-1499 | crates/atomic-node/src/main.rs:1505-1521 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (4–15 lines × 3) · ×1

Duplicated block (4–15 lines × 3) crates/atomic-node/src/main.rs:814 — crates/atomic-node/src/main.rs:814-828 | crates/atomic-node/src/main.rs:1058-1072 | crates/atomic-node/src/main.rs:1218-1221 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

D4 · Code Duplication · Duplicated block (12 lines × 3) · ×1

Duplicated block (12 lines × 3) crates/atomic-node/src/main.rs:586 — crates/atomic-node/src/main.rs:586-597 | crates/atomic-node/src/main.rs:601-612 | crates/atomic-node/src/main.rs:616-627 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

D4 · Code Duplication · Duplicated block (9 lines × 3) · ×1

Duplicated block (9 lines × 3) crates/atomic-feed/src/gateway.rs:191 — crates/atomic-feed/src/gateway.rs:191-200 | crates/atomic-feed/src/gateway.rs:251-260 | crates/atomic-feed/src/gateway.rs:308-316 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

D4 · Code Duplication · Duplicated block (9 lines × 2) · ×1

Duplicated block (9 lines × 2) crates/atomic-node/src/main.rs:840 — crates/atomic-node/src/main.rs:840-848 | crates/atomic-node/src/main.rs:1166-1174 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (8 lines × 2) · ×1

Duplicated block (8 lines × 2) crates/atomic-node/src/main.rs:670 — crates/atomic-node/src/main.rs:670-677 | crates/atomic-node/src/main.rs:681-688 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (5 lines × 2) · ×1

Duplicated block (5 lines × 2) crates/atomic-node/src/dashboard.rs:199 — crates/atomic-node/src/dashboard.rs:199-203 | crates/atomic-node/src/dashboard.rs:257-261 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (4–5 lines × 3) · ×1

Duplicated block (4–5 lines × 3) crates/atomic-node/src/main.rs:831 — crates/atomic-node/src/main.rs:831-835 | crates/atomic-node/src/main.rs:1075-1079 | crates/atomic-node/src/main.rs:1222-1225 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

P7 · Outbound HTTP resilience · Outbound HTTP without resilience · ×1

Outbound HTTP without resilience crates/atomic-feed/src/gateway.rs:113 — `reqwest::Client::new(` makes an outbound HTTP call, and nothing bounds it: no timeout, deadline, retry or circuit breaker is set for it here, and the client has no process-wide default. A slow or failing dependency will hold this service's request, thread or connection until the call gives up on its own — or never, for a client with no default timeout.

X15 · Unvalidated length from an untrusted reader · Length read from the parsed input is spent without ever being bounded · ×1

Length read from the parsed input is spent without ever being bounded crates/atomic-replay/src/log.rs:80 — `len` is read from the bytes being parsed at line 79 (`u32::from_le_bytes`), then used to size a `vec![…; n]` at line 80 — and nowhere in its scope is `len` compared to anything, clamped, or bounded against the input that remains. Whoever wrote those bytes therefore chooses the allocation directly: it reserves the whole length before a single byte of the payload is known to exist, so a 32-bit length asks for up to 4 GiB, and an allocation the allocator refuses aborts the process with `memory allocation of … bytes failed` — an abort, not a panic, so no `catch_unwind` intercepts it and the whole process dies; a 64-bit length past `isize::MAX` panics with `capacity overflow` instead, out of a parser whose failure path was written for malformed input, not for hostile input. Bound `len` against the bytes actually remaining and a maximum the format allows before allocating.

Minor — 49 finding(s)

X4 · Structured logging · Interpolated log message defeats structured logging · ×40

Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:204 — `warn!` at line 204 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:272 — `info!` at line 272 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:274 — `warn!` at line 274 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:278 — `error!` at line 278 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:321 — `info!` at line 321 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:324 — `warn!` at line 324 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:329 — `error!` at line 329 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:358 — `info!` at line 358 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:381 — `error!` at line 381 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:422 — `error!` at line 422 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:510 — `info!` at line 510 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:528 — `warn!` at line 528 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:565 — `warn!` at line 565 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:652 — `info!` at line 652 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:658 — `info!` at line 658 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/gateway.rs:672 — `warn!` at line 672 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:52 — `info!` at line 52 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:53 — `info!` at line 53 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:71 — `error!` at line 71 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:78 — `info!` at line 78 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:95 — `error!` at line 95 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-feed/src/binance.rs:99 — `error!` at line 99 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-node/src/recovery.rs:59 — `info!` at line 59 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-node/src/recovery.rs:80 — `info!` at line 80 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging crates/atomic-node/src/recovery.rs:115 — `warn!` at line 115 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
+ 15 more in this group — see findings.md.

D20 · ADR Quality · No ADRs found · ×1

No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.

D30 · Dependency Vulnerabilities · Low vulnerability · ×1

REDACTED

D36 · Supply-chain Provenance & Signing · REDACTED · ×1

REDACTED

M2 · Architecture documentation · No ADRs · ×1

No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

P1 · CI/CD gates · CI build step not evidenced · ×1

CI build step not evidenced — A CI pipeline exists but no build step was matched — changes may merge without the build ever running. A build step may be invoked directly as a command, or declared as a task that a runner named in the pipeline resolves.

P10 · Library API & versioning · Large public API surface · ×1

Large public API surface — 89/108 types (82%) declared in the published library are public. For a library, every public type is a stability contract — keep implementation types off the surface and expose only the intended API.

P6 · Release Hygiene · No changelog · ×1

No changelog — No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

S1 · Web-Security Posture · No security response headers detected · ×1

No security response headers detected — None of the 11 security response headers the OWASP Secure Headers Project recommends (Content-Security-Policy, Strict-Transport-Security, X-Content-Type-Options, X-Frame-Options, …) is set on a response this repository's Rust server sends — defense in depth, even when a proxy could set them. (−2.0 on this card.) The server: `axum::serve(` (crates/atomic-node/src/dashboard.rs:174).

S1 · Web-Security Posture · No inbound request validation detected · ×1

No inbound request validation detected — No handler of this repository's Rust server answers 400, 413 or 422 (`StatusCode::BAD_REQUEST`, `HttpResponse::BadRequest()`, `Status::BadRequest`, tonic `Status::invalid_argument`), and nothing declares validation — no `validator`/`garde` derive, no body limit (`DefaultBodyLimit::max`, `RequestBodyLimitLayer`, `JsonConfig::default().limit(…)`, Rocket `Limits`) — nothing shows inbound requests being checked, and refused, before a handler acts on them. A check that answers its failure with 200 and an error body is not seen. (−2.0 on this card.) The server: `axum::serve(` (crates/atomic-node/src/dashboard.rs:174).

Minor — 14 finding(s)

D12 · Dependency Hygiene · Outdated · ×14

Outdated: async-trait — `async-trait` is locked at 0.1.89 but 0.1.92 is the current stable release on crates.io, and it already satisfies the `"0.1"` requirement declared in crates/atomic-feed/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p async-trait` and commit the updated REDACTED.
Outdated: axum — `axum` is locked at 0.8.8 but 0.8.9 is the current stable release on crates.io, and it already satisfies the `"0.8"` requirement declared in crates/atomic-node/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p axum` and commit the updated REDACTED.
Outdated: cc — `cc` is locked at 1.2.57 but 1.9.0 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in crates/atomic-hotpath/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p cc` and commit the updated REDACTED.
Outdated: chrono — `chrono` is locked at 0.4.44 but 0.4.45 is the current stable release on crates.io, and it already satisfies the `"0.4"` requirement declared in crates/atomic-core/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p chrono` and commit the updated REDACTED.
Outdated: clap — `clap` is locked at 4.6.0 but 4.6.7 is the current stable release on crates.io, and it already satisfies the `"4"` requirement declared in crates/atomic-node/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p clap` and commit the updated REDACTED.
Outdated: futures-util — `futures-util` is locked at 0.3.32 but 0.3.34 is the current stable release on crates.io, and it already satisfies the `"0.3"` requirement declared in crates/atomic-feed/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p futures-util` and commit the updated REDACTED.
Outdated: open — `open` is locked at 5.3.3 but 5.4.4 is the current stable release on crates.io, and it already satisfies the `"5"` requirement declared in crates/atomic-node/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p open` and commit the updated REDACTED.
Outdated: quinn — `quinn` is locked at 0.11.9 but 0.11.12 is the current stable release on crates.io, and it already satisfies the `"0.11"` requirement declared in crates/atomic-transport/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p quinn` and commit the updated REDACTED.
Outdated: rustls — `rustls` is locked at 0.23.37 but 0.23.46 is the current stable release on crates.io, and it already satisfies the `"0.23"` requirement declared in crates/atomic-transport/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p rustls` and commit the updated REDACTED.
Outdated: serde — `serde` is locked at 1.0.228 but 1.0.229 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in crates/atomic-bus/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde` and commit the updated REDACTED.
Outdated: serde_json — `serde_json` is locked at 1.0.149 but 1.0.154 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in crates/atomic-core/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_json` and commit the updated REDACTED.
Outdated: thiserror — `thiserror` is locked at 2.0.18 but 2.0.21 is the current stable release on crates.io, and it already satisfies the `"2"` requirement declared in crates/atomic-bus/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p thiserror` and commit the updated REDACTED.
Outdated: tokio — `tokio` is locked at 1.50.0 but 1.54.1 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in crates/atomic-bus/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tokio` and commit the updated REDACTED.
Outdated: xxhash-rust — `xxhash-rust` is locked at 0.8.15 but 0.8.19 is the current stable release on crates.io, and it already satisfies the `"0.8"` requirement declared in crates/atomic-core/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p xxhash-rust` and commit the updated REDACTED.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Findings	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-cd292e7071e043aeb407f658ba9289b4/history.json --exit-code 0 --source .	0	artifacts/raw/gitleaks-history.json
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-cd292e7071e043aeb407f658ba9289b4/tree.json --exit-code 0 --source .	0	artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .	11	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	osv-scanner	—	osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .	12	artifacts/raw/osv-scanner.json
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.	0	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.	0	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	0	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	0	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	0	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	0	—
D43 · Malicious Dependencies	osv-scanner	—	osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .	0	artifacts/raw/osv-scanner.json

Run 01a1609b-9328-75a6-8f4c-f16285626be1 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Findings by how serious they are

This survey was produced by

Executive summary

Top priorities

Diagnosis: what the measurements show together

Architecture — module dependency graph

Architecture: which parts of the code depend on which

At a glance — Code Health · 64% · Adequate · gated by X4 ·

At a glance — Architecture · 95% · Exemplary ·

At a glance — Maturity · 61% · Adequate · gated by M2 ·

At a glance — Readiness · 54% · Adequate · gated by P7 ·

At a glance — Security · 42% · Weak · gated by C2 ·

At a glance — Event Sourcing · 100% · Exemplary ·

At a glance — Accessibility · 56% · Adequate ·

At a glance — Performance · 91% · Exemplary ·

Security & Compliance — OWASP Top-10 mapping

Roadmap

File quality

How the grades work

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

WCAG coverage — what static analysis assessed

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts