MoatazBadawy/Mawaqeet-Todo_and_Habits

Executive summary

MoatazBadawy/Mawaqeet-Todo_and_Habits scores 52 out of 100 and is rated Adequate, while four of its six lenses score higher still: Security and Compliance and Performance at 100, Code Health at 98 and Architecture at 95, all rated Exemplary.

The score is lower than those four because the weakest lens counts most, and here that is Production Readiness, which scores 26 and is rated Weak. Its CI/CD gates dimension scores 0 out of 10, and until that reaches 4, Production Readiness can't be rated higher than Adequate. The first actions are to resolve the 1 No ADRs found finding(s) in ADR Quality and to resolve the 15 Orphaned file finding(s) in Knowledge Freshness, and if Production Readiness rose to 70, the score would rise from 52 to about 69.

No finding in this survey is critical.

Watchdog couldn't measure 13 dimensions in this code, among them Code Coverage, Test Reliability and Dependency Hygiene, so they are left out of the score. The product code is 2,915 lines, which would take an estimated 0.1 person-years, around €3,100, to rebuild.

Code Health 98 ★ Exemplary Architecture 95 ★ Exemplary Maturity 50 Adequate, capped by Knowledge Freshness and Architecture documentation Production Readiness 26 Weak, capped by CI/CD gates and Security & performance tooling Security and Compliance 100 ★ Exemplary Performance 100 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.

Production Readiness 26 · counts for 46%Maturity 50 · counts for 25%Architecture 95 · counts for 14%Code Health 98 · counts for 8%Security and Compliance 100 · counts for 4%Performance 100 · counts for 2%

If Production Readiness rose from 26 to 70, the lowest score rated Strong, the score would rise from 52 to about 69.

Code composition: what the lines of code are

Product code 90%Tests 10%

Rebuild cost: about €3,100 · Estimate

Cost to rebuild	€1,000 to €5,200, for 17 to 55 hours of work, about 0.1 person-years for one engineer
Difficulty of the problem	Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor	×0.7 at a score of 52. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size	Small: 2,915 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

Resolve the 1 No ADRs found finding(s) in ADR Quality.

Raises the score by about 8 points · Low effort · ADR Quality

Resolve the 15 Orphaned file finding(s) in Knowledge Freshness — start with build.gradle (2), HabitAddingDialogScreen.kt, HabitEditScreen.kt.

Raises the score by about 12 points · Medium effort · Knowledge Freshness

Add a CI workflow that builds and runs the test suite on every push/PR.

Raises the score by about 11 points · Medium effort · CI/CD gates

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk

This code would cost about €3,100 to build again, about 0.1 person-years of work. Its weakest lens is Production Readiness, at 26 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.

Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts

What to do: Start with the Production Readiness actions in Top priorities.

If you do one thing first · First action

Resolve the 1 No ADRs found finding(s) in ADR Quality. Of all the actions in this report, it raises the score most for the work it takes: about 8 points for low effort, because it clears the 1 ADR Quality findings. The next survey will show the change in the score.

Based on: the ranked actions in Top priorities, by score gain and effort

Architecture — module dependency graph

Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways — a layering smell or cycle. A clean layered graph has none.

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

48 modules, with 47 dependencies between them. Every module uses only modules listed above it, so there are no loops.

The table shows the 40 modules with the most connections; 8 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →	2 habits.data.local	4 habits.domain.entities	6 habits.ui.view.navigation	8 habits.ui.viewmodel.models	9 habits.ui.viewmodel.utils	10 mawaqeet.main.navigation	11 todos.data.local	12 todos.domain.entities	13 todos.ui.view.navigation	14 todos.ui.viewmodel.models	15 common.data	17 habits.domain.repository	24 todos.domain.repository	28 habits.data.repositories	29 habits.domain.usecases	30 todos.data.repositories	31 todos.domain.usecases	32 habits.ui.viewmodel	34 todos.ui.viewmodel
1 common.data.utils
2 habits.data.local
3 habits.data.local.utils
4 habits.domain.entities
5 habits.domain.entities.utils
6 habits.ui.view.navigation
7 habits.ui.view.theme
8 habits.ui.viewmodel.models
9 habits.ui.viewmodel.utils
10 mawaqeet.main.navigation
11 todos.data.local
12 todos.domain.entities
13 todos.ui.view.navigation
14 todos.ui.viewmodel.models
15 common.data	1						1
16 habits.data.repositories.mapper	1	1
17 habits.domain.repository		1
18 habits.ui.view.component				1
19 habits.ui.view.navigation.Screen			3
20 habits.ui.viewmodel.mapper				1
21 habits.ui.viewmodel.utils.HabitType					4
22 mawaqeet.main.navigation.MainScreens						2
23 todos.data.repositories.mapper							1	1
24 todos.domain.repository								1
25 todos.ui.view.component										1
26 todos.ui.view.navigation.Screen									3
27 todos.ui.viewmodel.mapper								1		1
28 habits.data.repositories	1	1										1
29 habits.domain.usecases		2										6
30 todos.data.repositories							1	1					1
31 todos.domain.usecases								1					5
32 habits.ui.viewmodel				1	2										6
33 mawaqeet.di	1						1				1	1	1	1		1
34 todos.ui.viewmodel										1							5
35 habits.ui.view.screens.habit_add																		1
36 habits.ui.view.screens.habit_edit																		1
37 habits.ui.view.screens.habits				1														1
38 todos.ui.view.screens.todo_add																			1
39 todos.ui.view.screens.todo_edit																			1
40 todos.ui.view.screens.todos										1									1

Uses a module listed above itPart of a loopThe module itself

At a glance — Code Health · 98% · Exemplary ·

The Good

D1 · Kotlin Cyclomatic Complexity 10.0 D2 · Kotlin Cognitive Complexity 10.0 D3 · Kotlin God Classes 10.0 D4 · Kotlin Code Duplication 8.6 D17 · Kotlin Explicit Debt 10.0 X1 · Repo Async correctness 10.0 X12 · Repo Unreachable branch 10.0 X13 · Repo Undrained process stream 10.0 X16 · Repo Unfloored truncation loop 10.0 X18 · Repo Disposal-pattern correctness 10.0 X19 · Repo Unrestored process-global state 10.0 X20 · Repo Mistyped argument guard 10.0 X21 · Repo Side-effecting pattern guard 10.0 X22 · Repo Contradicted release guard 10.0 X23 · Repo Unguarded diagnostic materialisation 10.0 X25 · Repo Inert configuration knob 10.0 X26 · Repo Unsynchronised callback handoff 10.0 X27 · Repo Collection changed while being enumerated 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X3 · Repo Exception handling 10.0 X30 · Repo Support guard that admits what it rejects 10.0 X5 · Repo Nullable reference types 9.8

At a glance — Architecture · 95% · Exemplary ·

The Good

D5 · Kotlin Coupling 9.1 D6 · Kotlin Cohesion (LCOM4) 10.0 D26 · Kotlin Project Cohesion 10.0 D35 · Kotlin Change Coupling 10.0 AX10 · Repo Code composition 9.1 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0

At a glance — Maturity · 50% · Adequate · gated by D34, M2 ·

The Good

D15 · Kotlin Churn × Complexity Hotspots 10.0 D19 · Kotlin Documentation Quality 7.0 D21 · Kotlin Naming Consistency 10.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0

The Bad

M1 · Repo Documentation (README) 6.7

The Ugly

D20 · Kotlin ADR Quality 0.0 D34 · Kotlin Knowledge Freshness 0.0 M2 · Repo Architecture documentation 2.0

At a glance — Readiness · 26% · Weak · gated by P1, P3 ·

The Good

D13 · Kotlin Secret Scanning 10.0

The Bad

P6 · Repo Release Hygiene 5.0

The Ugly

P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0

At a glance — Security · 100% · Exemplary ·

The Good

D28 · Kotlin Secrets (history) 10.0 D29 · Kotlin Static Analysis (SAST) 10.0 D44 · Kotlin Platform End-of-Life 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0 X17 · Repo Uncapped recursion over a caller-supplied document 10.0

At a glance — Performance · 100% · Exemplary ·

The Good

PF3 · Repo Async & latency hygiene 10.0

Roadmap

Begin by resolving the 15 orphaned file issues in Knowledge Freshness, prioritizing build.gradle and key UI screens, while simultaneously establishing a CI/CD pipeline to automate testing on every push. Next, address the lack of architectural governance by creating an Architecture Decision Record (ADR) for significant design choices and documenting them in a dedicated folder. Finally, maintain release hygiene by implementing a changelog to clearly track what ships in each version.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Resolve the 1 No ADRs found finding(s) in ADR Quality.	+8.5 pts	Low	ADR Quality
Resolve the 15 Orphaned file finding(s) in Knowledge Freshness — start with build.gradle (2), HabitAddingDialogScreen.kt, HabitEditScreen.kt.	+11.7 pts	Medium	Knowledge Freshness
Add a CI workflow that builds and runs the test suite on every push/PR.	+11.1 pts	Medium	CI/CD gates
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.	+5.7 pts	Medium	Architecture documentation
Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.	+4.8 pts	Medium	Release Hygiene
Improve Documentation Quality — currently 7.0/10.	+2.5 pts	Medium	Documentation Quality
Add a build/run (quick start) section to the root README — the first thing a newcomer needs.	+1.7 pts	Medium	Documentation (README)
Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness.	+0.8 pts	Low	Knowledge Freshness

File quality

Per-file score 0–10 — a quality signature. Of 6 files carrying findings, judged against the Production bar: 0% slop · 67% mixed · 33% near-clean.

File	Score	Band	Worst signal
habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt	7.0	Mixed	Code Duplication: Near-duplicate member family (4 members, 24 shared lines)
app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt	7.4	Mixed	Code Duplication: Duplicated block (49 lines × 2)
habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt	7.8	Mixed	Code Duplication: Members sharing a duplicated core (4 members, 50+ identical tokens)
habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt	7.8	Mixed	Code Duplication: Duplicated block (25 lines × 2)
todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt	8.5	Near-clean	Code Duplication: Duplicated block (38 lines × 2)
habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt	8.5	Near-clean	Code Duplication: Duplicated block (19 lines × 2)

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 0

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 19

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 20

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 15

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 47 of 50 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 50 dimensions across the health lenses

D1D2D3D4D5D6D13D15D17D19D20D21D26D28D29D34D35D44AX10AX3AX4M1M2M3M4P1P3P6PF3X1X12X13X14X15X16X17X18X19X20X21X22X23X25X26X27X28X29X3X30X5

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 31 of 39 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
Watchdog duplication detector (in-process)	Code duplication	1.0.0	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.400	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.400	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a1633f-be86-76c8-9ad1-c4ae1cc17bbc.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.kt) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.kt) and this repository declares a JVM test suite (repository root, Gradle), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
D12 Dependency Hygiene — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — 17 Maven/Gradle manifest(s) were read, stating a version for 103 dependency(ies) and leaving 0 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-contributor repository — bus factor is not applicable (1 contributor(s) across 168 commit(s) sampled, automation and bot accounts excluded). Concentration needs a team to concentrate: with one contributor there is nobody to spread the knowledge to, so there is nothing here for the owner to act on.
D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: it declares a published package (common/data/build.gradle), but no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict.
D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Boot via AndroidApp (app). the Android app did not build — `./gradlew :app:assembleDebug` exited 1: 0.15', apply: false] was not found in any of the following sources: - Gradle Core Plugins (plugin is not in 'org.gradle' namespace) - Plugin Repositories (could not resolve plugin artifact 'com.googl…; runtime evidence skipped (launch chosen because app/build.gradle applies the Android application plugin and gradlew builds it).
C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Kotlin is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Kotlin is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cyclomatic complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d1_recommendation.md.

Do you agree with this assessment?

D2 · Cognitive Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cognitive complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d2_recommendation.md.

Do you agree with this assessment?

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 god class(es) detected.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

Do you agree with this assessment?

D4 · Code Duplication8.6 / 10Strong✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.6 / 10 · rule-coverage 100% · ceiling Verified

14 duplicated block group(s) detected. A further 2 rows report members as variants of one another; they aggregate block groups already counted above and are not themselves counted.

Duplicated block (6 lines × 2) · ×2app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:79

Near-duplicate member family (4 members, 24 shared lines)habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:57

Members sharing a duplicated core (4 members, 50+ identical tokens)habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:22

Duplicated block (49 lines × 2)app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:27

Duplicated block (38 lines × 2)todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:61

+ 10 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 2 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with HabitAlertMorningNotification.kt, HabitAddingDialogScreen.kt. — One of this dimension's main actionable groups (2 warning-level).
Resolve the 1 Near-duplicate member family (4 members, 24 shared lines) finding(s) in Code Duplication — start with HabitAddingDialogScreen.kt. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Members sharing a duplicated core (4 members, 50+ identical tokens) finding(s) in Code Duplication — start with HabitsEmpty.kt. — One of this dimension's main actionable groups (1 warning-level).
Stand up a CI pipeline, then gate Code Duplication in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D5 · Coupling9.1 / 10Stronggated by 2 serious findings✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 9.1 / 10 · rule-coverage 100% · ceiling Prevented

17 production modules (Gradle), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; edges a convention plugin adds from buildSrc or build-logic are not visible there; 2 module(s) off the main sequence, with abstractness counted on 16 of the 17 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).

Off the main sequence: :habits:domain:entities · ×2

What to do

Resolve the 2 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (2 warning-level).
Stand up a CI pipeline, then gate Coupling in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D6 · Cohesion (LCOM4)10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 7 classes have LCOM4 above 3.

✓ On the Gold path — maintain.

Detailed fixes: d6_recommendation.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

Do you agree with this assessment?

D17 · Explicit Debt10.0 / 10Exemplary○ Nothing flagged

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 deducted task-comment markers across 2915 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

✓ On the Gold path — maintain.

Detailed fixes: d17_recommendation.md.

Do you agree with this assessment?

D19 · Documentation QualityStrong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The root README is a well-illustrated marketing document for the app Mawaqeet (a modern Android to-do/habits companion), with an overview, a clear download link, and a strong visual. It describes the project's architecture ('Clean architecture', 'MVVM'), its tech stack ('Hilt, Coroutines, Flow, Jetpack (Room, ViewModel, Navigation)', 'Lottie', 'Material Design'), and outlines future sections such as 'Project Architecture', 'Structure (App Modules)', 'Tech stack & Open-source libraries', 'Contributions', and a license section. The visible content is strong but the document ends in clip mode mid-paragraph ('Dive into a visually appealing design that enhances usab') before any of the outlined architecture, tech-stack, or contribution sections appear; these are not penalized by the clip discipline.

What to do

Improve Documentation Quality — currently 7.0/10. — The root README is a well-illustrated marketing document for the app Mawaqeet (a modern Android to-do/habits companion), with an overview, a clear download link, and a strong visual. It describes the project's architecture ('Clean architecture', 'MVVM'), its tech stack ('Hilt, Coroutines, Flow, Jetpack (Room, ViewModel, Navigation)', 'Lottie', 'Material Design'), and outlines future sections such as 'Project Architecture', 'Structure (App Modules)', 'Tech stack & Open-source libraries', 'Contributions', and a license section. The visible content is strong but the document ends in clip mode mid-paragraph ('Dive into a visually appealing design that enhances usab') before any of the outlined architecture, tech-stack, or contribution sections appear; these are not penalized by the clip discipline.

Detailed fixes: d19_recommendation.md.

Do you agree with this assessment?

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 16 build units (Gradle) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)10.0 / 10Exemplary○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

semgrep found no security issues. semgrep hit a parse error in 1 file(s) — `gradlew` (line 177) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.

✓ On the Gold path — maintain.

Detailed fixes: d29_recommendation.md.

Do you agree with this assessment?

D34 · Knowledge Freshness0.0 / 10Critical✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

15 of 15 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt. Counted over 15 of the 104 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned file · ×15habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:1

Orphaned files with no living knowledge

What to do

Resolve the 15 Orphaned file finding(s) in Knowledge Freshness — start with build.gradle (2), HabitAddingDialogScreen.kt, HabitEditScreen.kt. — One of this dimension's main actionable groups (15 recommendation-level).
Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

D44 · Platform End-of-Life10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 16 platform declaration(s) and 108 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

✓ On the Gold path — maintain.

Detailed fixes: d44_recommendation.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX10 · Code composition9.1 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.

Do you agree with this assessment?

AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

Do you agree with this assessment?

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

Do you agree with this assessment?

M1 · Documentation (README)6.7 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
Add a README to the 16 of 16 project(s) that lack one — worth up to 2 pts.

Do you agree with this assessment?

M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.

Do you agree with this assessment?

M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Do you agree with this assessment?

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

Do you agree with this assessment?

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

Add a CI workflow that builds and runs the test suite on every push/PR.

Do you agree with this assessment?

P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

No static application security testing detected. For this repository's stack, add spotbugs with find-sec-bugs (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

What to do

Run what this repository's stack ships: spotbugs with find-sec-bugs — or `semgrep --config=auto`, which runs on any language — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.

Do you agree with this assessment?

PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

Do you agree with this assessment?

X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

Do you agree with this assessment?

X12 · Unreachable branch10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.

Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X13 · Undrained process stream10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.

Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X16 · Unfloored truncation loop10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.

Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X17 · Uncapped recursion over a caller-supplied document10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a walk that recurses through a JSON/XML tree handed in by its caller bounds how deep it will go — an uncapped walk lets the document's nesting choose the stack depth, and the resulting StackOverflowException cannot be caught.

Method: Roslyn syntax + semantics: methods that take a JSON/XML document node and call themselves with a child of it, reachable from an externally-callable member of the same type that accepts a document, checked for any depth parameter, descent counter or threaded arithmetic anywhere in the walk. On a repository with no .NET source it reads TypeScript off the engine’s own token stream (test, vendored, generated and minified paths and `.d.ts` not) with the same rule: a function or method with a parameter typed as a document value — `unknown`, `any`, `object`, `Record<string, unknown|any>`, a JSON alias (`JsonValue`, `JSONObject`, …) or a DOM node global the file does not rebind — that calls itself (bare, or through `this` for a method, or hands itself to a call over the value as in `value.map(walk)`) with something it took out of that value and never through an ancestor accessor such as `closest()` or `parentElement`, that is exported or reached from an exported function (a public method of the same exported class) taking such a value, and that names no depth, level, nesting, recursion, remaining or budget anywhere and threads no `+`/`-` arithmetic through a self-call. Plain JavaScript is not read: with no annotation nothing tells a parsed document from a tree the code built itself. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X18 · Disposal-pattern correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.

Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X19 · Unrestored process-global state10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that temporarily changes state belonging to the whole process — the working directory, an environment variable — puts it back on EVERY path: a restore reached only when nothing throws leaks the change to the rest of the process.

Method: Roslyn syntax + semantics: method bodies that write the process working directory or an environment variable and write it back in the same body, checked for whether that restore sits in a `finally`/`catch` or only on the straight-line path. On a repository with no .NET source the same rule reads production JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not): `process.chdir`, `process.env.NAME =`/`["NAME"] =` and `delete process.env.NAME`, and Deno’s `Deno.chdir`/`Deno.env.set`/`Deno.env.delete`, paired per function body (a nested function or arrow is its own body, and module top-level code is none), where the last write puts back a local the body captured from the same global or deletes a variable the first write set, with at least one statement between them; a write in a `catch`/`finally` of that body silences it. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X20 · Mistyped argument guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether an argument guard throws the exception its own condition describes — a guard that rejects a value for being EMPTY and reports it as `NullPointerException` (Java, Kotlin, Scala), `ArgumentError.notNull` (Dart) or `ArgumentNullException` (F#'s `nullArg`) tells the caller a parameter was null when it provably was not.

Method: Roslyn syntax: `throw new ArgumentNullException(nameof(p))` statements controlled by an `if`, whose condition is read for a test that is true of a NON-null `p` — an emptiness test that dereferences it (`p.Count == 0`, `!p.Any()`) or a BCL predicate documented true of the empty value (`string.IsNullOrEmpty(p)`). Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X22 · Contradicted release guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that TAKES a lock or semaphore and gives it back from a flag-guarded `finally` returns the value that flag implies — reporting success while the guard hands the primitive back admits a second caller the exclusion was there to keep out, and reporting failure while the guard keeps it leaves nothing to ever give it back.

Method: Roslyn syntax: `try` statements whose `finally` releases a synchronisation primitive under a bare local-bool guard, where the method also TOOK that same primitive before the `try`, checked for a `return` of a bool literal whose value disagrees with the flag state the method's own straight-line assignments put it in. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X23 · Unguarded diagnostic materialisation10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the work a diagnostic log line costs is paid only when that line is wanted — C# evaluates a call's arguments BEFORE the call, so a trace/debug message joined or projected out of a collection is built in full on every pass, and then discarded by a sink the shipped configuration leaves switched off.

Method: Roslyn syntax: log calls at a diagnostic level (a `Log`-prefixed method naming Trace/Debug/Verbose, or a bare `Debug`/`Trace`/`Verbose` on a receiver named for a logger), whose argument list is read for a call whose cost scales with a sequence — a LINQ operator, a materialisation, `string.Join`, a serializer — with no enclosing level check or conditional-compilation region. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `debug`/`trace`/`verbose` call on a receiver named for a logger, or a `log`-prefixed method naming the level, whose argument calls an array operator (`map`/`filter`/`reduce`/`sort`/…), `Array.from`, `Object.keys/values/entries`, `JSON.stringify`/`util.inspect` over anything but a literal, or an array `join` — outside any arrow or function passed as an argument, which the logger calls only when the level is on — with no enclosing `if`, `&&` or `?:` whose condition names a level, a level string, or the `NODE_ENV`/`__DEV__`/`DEV` build switch. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X25 · Inert configuration knob10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.

Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X26 · Unsynchronised callback handoff10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value handed from a callback to the body that waits on it crosses on something built to be crossed — a `Queue<T>`/`List<T>`/`Dictionary<K,V>` written inside an event handler and read back outside it is mutated by two flows at once, and the semaphore or completion source beside it orders how MANY items exist while leaving the collection's own head, tail and backing array unprotected.

Method: Roslyn syntax: method, accessor, local-function and lambda bodies that declare BOTH a non-thread-safe generic collection (`Queue`/`Stack`/`List`/`Dictionary`/`HashSet`/`Sorted*`/`LinkedList`) and a synchronisation primitive (`SemaphoreSlim`/`TaskCompletionSource`/`ManualResetEvent(Slim)`/`AutoResetEvent`/`CountdownEvent`) as locals, then read for a `+=`-registered lambda that raises that primitive while the body outside every lambda waits on it — and, in that scope, a mutating call on the collection inside the lambda paired with a mention of it outside. Any `lock` in the scope abstains it. On a repository with no .NET source the same handoff is read in Java off the engine’s own token stream (test source sets, vendored and demonstration paths not): an `ArrayList`/`LinkedList`/`ArrayDeque`/`PriorityQueue`/`Hash*`/`LinkedHash*`/`Tree*` local and a `CountDownLatch`/`Semaphore`/`CompletableFuture` local, a lambda or anonymous class that raises the primitive and mutates the collection, and a wait outside it; any `synchronized` or `lock()` abstains the body. Because each of those primitives orders what the callback wrote before raising it, only a touch that provably overlaps the callback is convicted: one after the registration and before the next wait, or one in a loop registered-before, waiting on every pass and not declaring the collection. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `for (x in c)` or `c.forEach { … }` leaves the collection it is walking alone — a `mutableListOf`/`ArrayList`, `mutableMapOf`/`HashMap` or `mutableSetOf`/`HashSet` is a `java.util` collection on the JVM and is walked by its own fail-fast iterator, so a body that adds to or removes from the very collection the loop is walking makes the next step throw `ConcurrentModificationException` and the remaining elements are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X3 · Exception handling10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.

Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.

Do you agree with this assessment?

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X5 · Nullable reference types9.8 / 10Exemplary✓ Tool-verified

Other · Code Health — Whether Kotlin's null safety is not undermined by not-null assertions — `String` cannot hold null and `String?` must be checked before use in every Kotlin module, and each `!!` is a run-time `NullPointerException` the author has told the compiler cannot happen.

Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	98%	Exemplary	Solid.
Architecture	95%	Exemplary	Solid.
Maturity	50%	Adequate — gated by D34, M2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	26%	Weak — gated by P1, P3	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	100%	Exemplary	Strongest area.
Performance	100%	Exemplary	Solid.

Not evidenced — 2 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control

Not included — 67 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
AX1 Captive dependencies — Not applicable: Dagger rejects, at compile time, a component that holds a binding with a narrower scope than its own.
AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No class in this Kotlin code is a Spring, JSR-330 or CDI singleton bean.
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
AXR1 Runtime accessibility — the Android app did not build — `./gradlew :app:assembleDebug` exited 1: 0.15', apply: false] was not found in any of the following sources: - Gradle Core Plugins (plugin is not in 'org.gradle' namespace) - Plugin Repositories (could not resolve plugin artifact 'com.googl…; runtime evidence skipped (launch chosen because app/build.gradle applies the Android application plugin and gradlew builds it) This is a statement about this run, not a statement about your application: nothing here says the app is inaccessible, only that it was never run.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no data at rest for these controls to protect.
C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named column (email, first_name, date_of_birth, phone_number, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no personal data whose lifetime a retention limit would bound.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no personal data for a data subject to erase, export or consent over.
D10 Test Quality — ~340 lines of test source are present (.kt) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included — the .kt suite was found but not re-run
D12 Dependency Hygiene — Not scored — 17 Maven/Gradle manifest(s) were read, stating a version for 103 dependency(ies) and leaving 0 to a parent or an imported BOM, but no build resolved the dependency graph, so the outdated signal was not established. NOT a finding that these dependencies are current or healthy.
D14 License Compliance — Not scored — this repository's 103 declared JVM dependency coordinate(s) were read from its 17 Maven/Gradle manifest(s), but Maven Central could not be asked for the licence of 29 of them (HTTP 429 Too Many Requests from https://repo1.maven.org/maven2/androidx/core/core-ktx/1.12.0/core-ktx-1.12.0.pom), and a licence verdict over part of a dependency graph is not a licence verdict. Nothing is asserted about this repository's licensing in either direction.
D16 Bus Factor — single-contributor repository — bus factor is not applicable
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.kt), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Gradle build (build.gradle/build.gradle.kts) — not scanned yet).
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D43 Malicious Dependencies — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Gradle build (build.gradle/build.gradle.kts) — not scanned yet).
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
D9 Test Distribution — Test source is present (.kt) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
DM1 Domain Modelling — applicable but not scored (2 of 3 signals for this style — below the bar we score at): 4 value object(s); a Domain/Aggregates/ValueObjects layer
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — no CI workflow found
P2 Observability — This repository's JVM source (16 module(s), 86 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JVM source, so there is no service whose uptime a failing dependency could take down
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `@Benchmark` in a Java, Kotlin or Scala file importing JMH or kotlinx-benchmark, Jetpack Benchmark's `measureRepeated` in a file importing androidx.benchmark, or JMH/kotlinx-benchmark/androidx.benchmark in a pom.xml, Gradle or sbt build, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
PF2 Allocation hygiene — Not applicable: allocation awareness is rated where code engineers for it — at least 400 production lines that ship benchmarks or already use allocation-aware idioms (8 or more). This repository's Kotlin code has 3,235 production line(s), 0 such use(s) and no benchmarks, so there is no allocation work to rate. The card is reward-only: its absence costs nothing.
S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X2 Cancellation propagation — no C# was loaded; this repository's Kotlin was read, and no request in it can be cancelled by a caller (Ktor, OkHttp's newCall or a URL stream, from a suspend function) — a Kotlin request outside a suspend function has no caller's cancellation to honour
X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Kotlin was read, and it logs through none that an assembled message defeats: Android's `Log` and Timber, java.util.logging and log4j-api-kotlin take one finished message (as log4net does in C#), or it makes no call through a named logger at all. Calls made through SLF4J, log4j 2 or kotlin-logging (`LoggerFactory.getLogger`, `KotlinLogging.logger {}`) would be judged.
X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Serious — 19 finding(s)

D4 · Code Duplication · Duplicated block (6 lines × 2) · ×2

Duplicated block (6 lines × 2) app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:79 — app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:79-84 | app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt:78-83 — before extracting anything, compare `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt` and `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 71 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:79` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.
Duplicated block (6 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:166 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:166-171 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habits/HabitsScreen.kt:86-91 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:166` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.

D5 · Coupling · Off the main sequence · ×2

Off the main sequence: :habits:domain:entities — :habits:domain:entities: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 2 project(s), so it's rigid to change.
Off the main sequence: :todos:domain:entities — :todos:domain:entities: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 2 project(s), so it's rigid to change.

D4 · Code Duplication · Near-duplicate member family (4 members, 24 shared lines) · ×1

Near-duplicate member family (4 members, 24 shared lines) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:57 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:57-160 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:54-166 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:47-130 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:48-143 — These 4 members are variants of one another: a block of 24 lines reported below appears in every one of them, and the pairwise near-duplicate rows they would otherwise produce are collapsed into this row. Read them as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.

D4 · Code Duplication · Members sharing a duplicated core (4 members, 50+ identical tokens) · ×1

Members sharing a duplicated core (4 members, 50+ identical tokens) habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:22 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:22-39 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsError.kt:22-39 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodosEmpty.kt:22-39 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodosError.kt:22-39 — These 4 members share a duplicated core: a run of at least 50 identical tokens appears in every one of them. That run is NOT broken out as duplicated-block rows below — it is what admitted this row, and the blocks below cover only the part of it that clears the block floor, so they understate the correspondence. Read the members as one construct written 4 times. The repair is at the members' grain — factor the shared implementation out once and have all of them call it with their differences as parameters or as an injected step, or, where the difference is systematic, generate them from one template. Extracting the individual blocks below is not the same fix: it leaves every body in place and the next edit still has to be made 4 times.

D4 · Code Duplication · Duplicated block (49 lines × 2) · ×1

Duplicated block (49 lines × 2) app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:27 — app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:27-75 | app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt:26-74 — before extracting anything, compare `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt` and `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 71 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:27` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.

D4 · Code Duplication · Duplicated block (38 lines × 2) · ×1

Duplicated block (38 lines × 2) todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:61 — todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:61-98 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:62-99 — before extracting anything, compare `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 63 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:61` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it.

D4 · Code Duplication · Duplicated block (25 lines × 2) · ×1

Duplicated block (25 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt:79 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt:79-103 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt:79-103 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt` as WHOLE FILES: 83% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 2 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (21 lines × 2) · ×1

Duplicated block (21 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:140 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:140-160 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:110-130 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 46 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:140` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (19 lines × 2) · ×1

Duplicated block (19 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:135 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:135-153 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:112-130 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 60 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:135` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (17 lines × 2) · ×1

Duplicated block (17 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:72 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:72-88 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:70-86 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:72` it runs out through the closing brace of the declaration holding it and carries on into the declaration that follows — the window is the tail of one member plus the head of the next, so no call can be substituted for those exact lines, and the smallest declaration that contains all of them is the type they sit in. The repeated unit is the member each site sits in: where those members' bodies are the same, move one whole member to the shared location and have the others delegate to it; where the copies are a run of near-identical overloads or wrappers that differ only in their signatures, the repetition IS the run — a one-line delegation has no helper inside it to lift — so generate the run from the set it enumerates, or accept it and keep each member's own documentation with it. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just after the matched lines, `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:90` calls `HabitTypeChips`, `Spacer`, `height` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:88` does not — after which the two agree again for 3 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.

D4 · Code Duplication · Duplicated block (16 lines × 3) · ×1

Duplicated block (16 lines × 3) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:117 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:117-132 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:111-126 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:88-103 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:117` it begins part-way through the construct above it, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.

D4 · Code Duplication · Duplicated block (16 lines × 2) · ×1

Duplicated block (16 lines × 2) app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:86 — app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:86-101 | app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt:85-100 — before extracting anything, compare `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt` and `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt` as WHOLE FILES: this scan already matched 3 separate duplicated blocks between them, totalling at least 71 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:86` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that.

D4 · Code Duplication · Duplicated block (15 lines × 4) · ×1

Duplicated block (15 lines × 4) habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:25 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:25-39 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsError.kt:25-39 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodosEmpty.kt:25-39 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodosError.kt:25-39 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsError.kt` as WHOLE FILES: 91% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 1 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. If that is what happened, the fix is to keep one copy and have the other call it (or delete it), which resolves this row and its siblings together — extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitsEmpty.kt:25` it runs out through the closing brace of the declaration holding it — the window is that declaration's tail, not a fragment that begins part-way through something, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (14 lines × 4) · ×1

Duplicated block (14 lines × 4) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:98 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:98-111 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:92-105 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:68-81 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:69-82 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:98` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (14 lines × 2) · ×1

Duplicated block (14 lines × 2) habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt:118 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt:118-131 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt:118-131 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt` as WHOLE FILES: 83% of the shorter file's lines also appear in the other, so this reads as one file having been copied from the other rather than as a helper waiting to be extracted. The 2 duplicated block(s) this scan matched between them are fragments of that copy, not the extent of it — treat the file pair as the unit. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Each matched range is the entire body of the declaration above it, so the region is already a complete unit: move that whole declaration to the shared location and have each site call it, rather than lifting the lines out of their bodies. Any `return` inside it is the body's own exit and keeps its meaning in the moved unit. Note first that the copies are not typed on the same thing: `Black` names `com.moataz.habits.ui.view.theme.Black` in one and `com.moataz.todos.ui.view.theme.Black` in another — different types that share a simple name, which is why the text matched. A single extracted unit cannot be given a parameter type that fits both, so unifying those types (or introducing a shared abstraction over them) is the step that has to come BEFORE the extraction above; if they are deliberately separate, the duplication is the price of that separation and the honest resolution is to record the decision rather than to extract.

D4 · Code Duplication · Duplicated block (10–11 lines × 4) · ×1

Duplicated block (10–11 lines × 4) habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:61 — habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:61-70 | habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:58-68 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:50-59 | todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:51-60 — before extracting anything, compare `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt` and `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt` as WHOLE FILES: this scan already matched 4 separate duplicated blocks between them, totalling at least 58 lines, which is the signature of one file having been copied from the other rather than of a helper waiting to be extracted. The two sit in different directories, so one cannot simply be deleted in favour of the other while both are reached separately: hoist the shared part into a location both already depend on and have each file call it, and retire whichever file turns out to have no caller of its own left. Extracting one helper per block leaves the fork in place. Read the line range as the matched WINDOW rather than a finished unit: at `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:61` it does not close everything it opens, so those exact lines cannot be lifted as they stand — widen the region to the smallest complete statement or declaration that contains it, and extract that. ★ These copies have DRIFTED, and that is worth reading before extracting anything: just before the matched lines, `habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:59` calls `rememberLottieComposition`, `RawRes` and `todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:48` does not — after which the two agree again for 4 more lines. One of those two behaviours is the intended one and the other is what a copy-paste left behind, so decide which BEFORE unifying them: extracting the shared part will silently settle it, and if the copy that skips the call is the wrong one, that bug is already live.

P1 · CI/CD gates · No CI pipeline · ×1

No CI pipeline — No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

Minor — 20 finding(s)

D34 · Knowledge Freshness · Orphaned file · ×15

Orphaned file habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habits/HabitsScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertNightNotification.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todos/TodosScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file habits/ui/viewmodel/src/main/java/com/moataz/habits/ui/viewmodel/HabitsViewModel.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file app/build.gradle:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file app/src/main/java/com/moataz/mawaqeet/main/MainActivity.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file app/src/main/java/com/moataz/mawaqeet/main/MainScreen.kt:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
Orphaned file habits/ui/view/build.gradle:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.

D20 · ADR Quality · No ADRs found · ×1

No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.

D34 · Knowledge Freshness · Orphaned files with no living knowledge · ×1

Orphaned files with no living knowledge — 15 of 15 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated and example/demo trees and test files identified by path convention, largest first; 15 of the 104 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_add/HabitAddingDialogScreen.kt, habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habit_edit/HabitEditScreen.kt, todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_edit/TodoEditScreen.kt, todos/ui/view/src/main/java/com/moataz/todos/ui/view/screens/todo_add/TodoAddScreen.kt, habits/ui/view/src/main/java/com/moataz/habits/ui/view/screens/habits/HabitsScreen.kt, habits/ui/view/src/main/java/com/moataz/habits/ui/view/component/HabitItem.kt, todos/ui/view/src/main/java/com/moataz/todos/ui/view/component/TodoItem.kt, app/src/main/java/com/moataz/mawaqeet/components/notification/HabitAlertMorningNotification.kt (and 7 more). Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.

M2 · Architecture documentation · No ADRs · ×1

No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

P3 · Security & performance tooling · No SAST · ×1

No SAST — No static application security testing detected. For this repository's stack, add spotbugs with find-sec-bugs (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

P6 · Release Hygiene · No changelog · ×1

No changelog — No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4bda084dc6ea4df4945d87adc0f073aa/history.json --exit-code 0 --source .	artifacts/raw/gitleaks-history.json
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4bda084dc6ea4df4945d87adc0f073aa/tree.json --exit-code 0 --source .	artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	none (dependency manifest found, not scanned for vulnerabilities here)	—	none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Gradle build (build.gradle/build.gradle.kts) — not scanned yet).	—
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.	—
D36 · Supply-chain Provenance & Signing	provenance	—	provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	—
D43 · Malicious Dependencies	none (dependency manifest found, not scanned for vulnerabilities here)	—	none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Gradle build (build.gradle/build.gradle.kts) — not scanned yet).	—

Run 01a1633f-be86-76c8-9ad1-c4ae1cc17bbc · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Findings by how serious they are

This survey was produced by

Executive summary

Top priorities

Diagnosis: what the measurements show together

Architecture — module dependency graph

Architecture: which parts of the code depend on which

At a glance — Code Health · 98% · Exemplary ·

At a glance — Architecture · 95% · Exemplary ·

At a glance — Maturity · 50% · Adequate · gated by D34, M2 ·

At a glance — Readiness · 26% · Weak · gated by P1, P3 ·

At a glance — Security · 100% · Exemplary ·

At a glance — Performance · 100% · Exemplary ·

Roadmap

File quality

How the grades work

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts