Public report of Rigellute/spotify-tui, published 26 October 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.10.5). Watchdog signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 26 October 2026, 03:27 UTC · Survey ID cd_26c6add481224f498cba69936ad36943

Rigellute/spotify-tui

Measured 26 October 2026, 03:26 UTC, at code version c4dcf6b

No regression since the last survey Bus factor: not measured

A regression is a drop of 0.5 points or more in the score, or of 2.5 or more out of 10 in a dimension, since the last survey.

Bus factor is not measured: No living knowledge left to concentrate.

CAI score 54out of 100 At risk No change since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

Event Sourcing 100 Exemplary Performance 100 Exemplary Architecture 99 Exemplary Code Health 84 Adequate Production Readiness 57 Adequate Security and Compliance 47 Weak Maturity 44 Adequate

A small codebase: 11,135 lines of product code in 1 project, tests not counted · Estimated rebuild effort: under 0.1 person-years · Weakest lens: Maturity, 44

Findings by how serious they are

34 critical 139 serious 43 minor

24 dimensions are left out of the score. For each one, Watchdog either couldn't measure it in this code, or found no evidence of the safeguard it looks for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Watchdog
Producer
Canine Development
Analyzer
Watchdog engine 1.0.0
Measured
26 October 2026, 03:26 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds Watchdog. It is open to any tool that implements it, and today Watchdog is the only one that does.

A critical security finding is open, such as a library with a known critical vulnerability or a password or key found in the code. The score itself is unchanged, but its band shows At risk until the finding is fixed. See the Security and Compliance lens.

The score is deterministic, which means the same code always gets the same score. Watchdog works it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

44of 44 dimensions measured by tools.
201of 216 findings point to an exact file and line, so you can open each one in the code. The other 15 concern the repository as a whole, such as missing documentation.
44dimensions across 7 lenses, read from 11,135 lines of product code in 1 project.
Chapters

Executive summary

Rigellute/spotify-tui is rated At risk because critical security findings are open, most of them in the build pipeline. Its score is held back because 28 files are no longer known to anyone active in the project and the project keeps no record of its design decisions. It scores 54 out of 100, which the At risk rating leaves unchanged. We judged it as a preview release, against a lower bar.

Maturity, at 44, is the weakest lens and counts most in the score. The best first step is recording design decisions, worth about 8 points. Having someone learn and document the 28 files no active contributor knows comes next, also worth about 8. Raising Maturity to 62 would lift the score to about 58.

Twenty-two pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. Ten known security holes in the packages the code depends on can be used by attackers, and one automatic update takes new releases before a bad one can be spotted. Pinning each tool to an exact version, updating the vulnerable packages and setting a waiting period for automatic updates would close these risks. Limiting each secret to its own step would fix the secret exposed to more of the pipeline than needed.

The product code is 11,135 lines, about €11,000 to rebuild.

Code Health 84 Adequate, capped by Cognitive Complexity Architecture 99 ★ Exemplary Maturity 44 Adequate, capped by Knowledge Freshness and Architecture documentation Production Readiness 57 Adequate, capped by Observability Security and Compliance 47 Weak, capped by Static Analysis (SAST), Dependency Vulnerabilities and Supply-chain Provenance & Signing Event Sourcing 100 ★ Exemplary Performance 100 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Maturity 44 · counts for 46%Security and Compliance 47 · counts for 25%Production Readiness 57 · counts for 14%Code Health 84 · counts for 8%Architecture 99 · counts for 4%Event Sourcing 100 · counts for 2%Performance 100 · counts for 1%

If Maturity rose from 44 to 62, the lowest score rated Strong, the score would rise from 54 to about 58.

Code composition: what the lines of code are
Product code 100%
New since the last survey: 2 findings

These 2 critical or serious findings weren't in the previous survey, on 12 October 2026.

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 1 finding

This critical or serious finding was in the previous survey, on 12 October 2026, and is gone from this one.

  • Supply-chain Provenance & Signing REDACTED
Rebuild cost: about €11,000 · Estimate
Cost to rebuild€3,600 to €18,000, for 61 to 192 hours of work, under 0.1 person-years for one engineer
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 54. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeSmall: 11,135 lines of product code
What it is notNot a quotation: nobody has offered to build it for that. Not a valuation: it says nothing about what the business is worth. Not a certified figure: no professional has signed it as one.

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 1 No ADRs found finding(s) in ADR Quality.
Raises the score by about 8 points · Low effort · ADR Quality
2
Resolve the 28 Orphaned file finding(s) in Knowledge Freshness — start with util.rs (2), search_results.rs, cli_app.rs.
Raises the score by about 8 points · Medium effort · Knowledge Freshness
3
Record your significant design decisions.
Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Raises the score by about 6 points · Medium effort · Architecture documentation

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk
This code would cost about €11,000 to build again, under 0.1 person-years of work. Its weakest lens is Maturity, at 44 (Weak). Maturity is about how well the project explains and looks after itself, which decides whether a new developer, or a new supplier, can take over. Because the weakest lens counts most in the score, work on Maturity also moves the score most.
Based on: the rebuild estimate · the Maturity grade · how much each lens counts
What to do: Start with the Maturity actions in Top priorities.
If you do one thing first · First action
Resolve the 1 No ADRs found finding(s) in ADR Quality. Of all the actions in this report, it raises the score most for the work it takes: about 8 points for low effort, because it clears the 1 ADR Quality findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort
What hard-to-read code costs each year · Cost
Four dimensions measure how easy the code is to work in: two measure how tangled its logic is, one how much of it is copied, and one how well each part sticks to a single job. In this codebase they average 7.0 out of 10. Code at that level is slower to change than clean code, and Watchdog estimates the extra work at 3% to 6% on every change. The history of the code shows how much it changes: about 287 lines over the last 90 days, which is about 1,164 lines a year. At that pace, the extra work comes to an estimated 0.1 to 0.4 engineer-days a year, and it grows as more code changes.
How this is estimated: The number of changed lines is measured from the history of the code. The rest rests on two assumptions of Watchdog's own: code scoring 8 out of 10 or more adds no extra work, and each point below 8 adds 2.5% to 5.6% to every change, never less than 2% to 5% and never more than 40% to 60% in all; and an engineer changes 150 to 400 lines in a day. The result is a range for planning, not a measurement.
Based on: Cyclomatic Complexity · Cognitive Complexity · Code Duplication · Cohesion (LCOM4) · the code's change history
What to do: Start with the files listed under Churn × Complexity Hotspots, which change often and are hard to read, because that is where the extra work is paid most often.

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

42 modules, with 73 dependencies between them. One loop runs through 2 of the modules, marked above the diagonal.

The table shows the 40 modules with the most connections; 2 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →1 config2 event.key3 event.events4 network5 user_config6 app7 cli.handle8 cli.util9 util10 spotify_tui11 cli.clap12 cli.cli_app13 handlers14 handlers.album_list15 handlers.album_tracks16 handlers.analysis17 handlers.artist18 handlers.artist_albums19 handlers.artists20 handlers.basic_view21 handlers.common_key_events22 handlers.dialog23 handlers.empty24 handlers.episode_table25 handlers.error_screen26 handlers.help_menu27 handlers.home28 handlers.input29 handlers.library30 handlers.made_for_you31 handlers.playbar32 handlers.playlist33 handlers.podcasts34 handlers.recently_played35 handlers.search_results36 handlers.select_device37 handlers.track_table38 ui39 ui.audio_analysis40 ui.util
1 config
2 event.key
3 event.events1
4 network11
5 user_config2
6 app11
7 cli.handle11
8 cli.util1
9 util11
10 spotify_tui111
11 cli.clap1
12 cli.cli_app114
13 handlers11
14 handlers.album_list11
15 handlers.album_tracks11
16 handlers.analysis11
17 handlers.artist11
18 handlers.artist_albums11
19 handlers.artists11
20 handlers.basic_view11
21 handlers.common_key_events11
22 handlers.dialog11
23 handlers.empty11
24 handlers.episode_table11
25 handlers.error_screen11
26 handlers.help_menu11
27 handlers.home11
28 handlers.input11
29 handlers.library11
30 handlers.made_for_you11
31 handlers.playbar11
32 handlers.playlist11
33 handlers.podcasts11
34 handlers.recently_played11
35 handlers.search_results11
36 handlers.select_device11
37 handlers.track_table11
38 ui1
39 ui.audio_analysis1
40 ui.util13
Uses a module listed above itPart of a loopThe module itself
1 config2 event.key3 event.events4 network5 user_config6 app7 cli.handle8 cli.util9 util10 spotify_tui11 cli.clap12 cli.cli_app13 handlers14 handlers.album_list15 handlers.album_tracks16 handlers.analysis17 handlers.artist18 handlers.artist_albums19 handlers.artists20 handlers.basic_view21 handlers.common_key_events22 handlers.dialog23 handlers.empty24 handlers.episode_table25 handlers.error_screen26 handlers.help_menu27 handlers.home28 handlers.input29 handlers.library30 handlers.made_for_you31 handlers.playbar32 handlers.playlist33 handlers.podcasts34 handlers.recently_played35 handlers.search_results36 handlers.select_device37 handlers.track_table38 ui39 ui.audio_analysis40 ui.utilconfig1event.key2event.events3network4user_config5app6cli.handle7cli.util8util9spotify_tui10cli.clap11cli.cli_app12handlers13handlers.album_list14handlers.album_tracks15handlers.analysis16handlers.artist17handlers.artist_albums18handlers.artists19handlers.basic_view20handlers.common_key_events21handlers.dialog22handlers.empty23handlers.episode_table24handlers.error_screen25handlers.help_menu26handlers.home27handlers.input28handlers.library29handlers.made_for_you30handlers.playbar31handlers.playlist32handlers.podcasts33handlers.recently_played34handlers.search_results35handlers.select_device36handlers.track_table37ui38ui.audio_analysis39ui.util40111211111111111114111111111111111111111111111111111111111111111111111113+2 more modules (most-connected shown)

At a glance — Code Health · 84% · Adequate · gated by D2 ·

The Good
D3 · Rust God Classes 7.7 D4 · Rust Code Duplication 9.5 D17 · Rust Explicit Debt 9.8 X1 · Repo Async correctness 10.0 X21 · Repo Side-effecting pattern guard 10.0 X27 · Repo Collection changed while being enumerated 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X30 · Repo Support guard that admits what it rejects 10.0
The Bad
D1 · Rust Cyclomatic Complexity 5.9
The Ugly
D2 · Rust Cognitive Complexity 2.6

At a glance — Architecture · 99% · Exemplary ·

The Good
D6 · Rust Cohesion (LCOM4) 10.0 D26 · Rust Project Cohesion 10.0 D35 · Rust Change Coupling 10.0 AX10 · Repo Code composition 9.8 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 AX9 · Repo CQS / query purity 10.0

At a glance — Maturity · 44% · Adequate · gated by D34, M2 ·

The Good
D15 · Rust Churn × Complexity Hotspots 9.8 D19 · Rust Documentation Quality 10.0 M1 · Repo Documentation (README) 7.3 M3 · Repo Folder & project structure 10.0
The Ugly
D20 · Rust ADR Quality 0.0 D34 · Rust Knowledge Freshness 0.0 M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 57% · Adequate · gated by P2 ·

The Good
D9 · Rust Test Distribution 10.0 D12 · Rust Dependency Hygiene 9.8 D13 · Rust Secret Scanning 10.0 D14 · Rust License Compliance 10.0 P1 · Repo CI/CD gates 10.0 P3 · Repo Security & performance tooling 7.0 P6 · Repo Release Hygiene 10.0
The Bad
P4 · Repo Deployment & Rollback 5.0
The Ugly
P2 · Repo Observability 0.0

At a glance — Security · 47% · Weak · gated by D29, D30, D36 ·

The Good
D28 · Rust Secrets (history) 10.0 D43 · Rust Malicious Dependencies 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0
The Ugly
D29 · Rust Static Analysis (SAST) 3.4 D30 · Rust Dependency Vulnerabilities 0.0 D36 · Rust Supply-chain Provenance & Signing 0.0

At a glance — Event Sourcing · 100% · Exemplary ·

The Good
ES1 · Repo Fold determinism 10.0 ES2 · Repo Immutable events 10.0

At a glance — Performance · 100% · Exemplary ·

The Good
PF3 · Repo Async & latency hygiene 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A03:2025 — Software Supply Chain Failures47High / Critical
A05:2025 — Injection38High / Critical

Roadmap

Begin by addressing the single missing architectural decision record and establishing a standard process for documenting future significant design choices in a dedicated folder. Simultaneously, resolve the 28 orphaned files, prioritizing util.rs, search_results.rs, and cli_app.rs, to improve codebase hygiene. Next, implement structured logging using the tracing library with JSON output across your binaries to enhance observability. Finally, update the root README to clearly explain how to run the test suite.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 1 No ADRs found finding(s) in ADR Quality.+8.4 ptsLowADR Quality
Resolve the 28 Orphaned file finding(s) in Knowledge Freshness — start with util.rs (2), search_results.rs, cli_app.rs.+7.9 ptsMediumKnowledge Freshness
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.+6.2 ptsMediumArchitecture documentation
Resolve the 3 Most significant orphaned file finding(s) in Knowledge Freshness — start with mod.rs, network.rs, app.rs.+1.8 ptsLowKnowledge Freshness
Adopt `tracing` with `tracing-subscriber` (JSON output) and log at meaningful points in the binaries you run.+3.1 ptsMediumObservability
Resolve the 2 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED.+1.4 ptsLowSupply-chain Provenance & Signing
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED.+1.0 ptsLowStatic Analysis (SAST)
Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED.+1.0 ptsLowStatic Analysis (SAST)

File quality

Per-file score 0–10 — a quality signature. Of 31 files carrying findings, judged against the Preview bar: 10% slop · 19% mixed · 71% near-clean.

FileScoreBandWorst signal
REDACTED0.2SlopStatic Analysis (SAST): High: REDACTED
REDACTED0.2SlopDependency Vulnerabilities: Critical CVE: REDACTED
REDACTED0.3SlopStatic Analysis (SAST): High: REDACTED
REDACTED4.6MixedStatic Analysis (SAST): Medium: REDACTED
src/user_config.rs6.0MixedExplicit Debt: TodoComment
src/ui/mod.rs6.0MixedExplicit Debt: TodoComment
src/app.rs6.0MixedExplicit Debt: TodoComment
src/network.rs6.0MixedExplicit Debt: TodoComment
src/config.rs6.7MixedExplicit Debt: FixmeComment
src/handlers/track_table.rs7.0Near-cleanCyclomatic Complexity: spotify_tui::handlers::track_table::handler (cyclomatic 40)
src/handlers/search_results.rs7.2Near-cleanCyclomatic Complexity: spotify_tui::handlers::search_results::handler (cyclomatic 42)
src/handlers/album_tracks.rs7.2Near-cleanCyclomatic Complexity: spotify_tui::handlers::album_tracks::handler (cyclomatic 26)
src/cli/cli_app.rs7.2Near-cleanCognitive Complexity: CliApp::play (cognitive 20)
REDACTED7.2Near-cleanStatic Analysis (SAST): High: REDACTED
src/handlers/artist.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::handlers::artist::handler (cyclomatic 31)
src/cli/handle.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::cli::handle::handle_matches (cyclomatic 25)
src/handlers/recently_played.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::handlers::recently_played::handler (cyclomatic 25)
src/main.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::start_ui (cyclomatic 24)
src/handlers/input.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::handlers::input::handler (cyclomatic 24)
src/handlers/artists.rs7.8Near-cleanCyclomatic Complexity: spotify_tui::handlers::artists::handler (cyclomatic 21)

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 34

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 139

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 43

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 24

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 44 of 44 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); none rely on LLM judgement. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 44 dimensions across the health lenses
D1D2D3D4D6D9D12D13D14D15D17D19D20D26D28D29D30D34D35D36D43AX10AX3AX4AX9ES1ES2M1M2M3P1P2P3P4P6PF3X1X14X15X21X27X28X29X30

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 201 of 216 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Watchdog duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivySecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement—◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a1763e-c22f-7817-a58c-81255ffb9b3b.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.rs) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
  • D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs) and this repository declares a Cargo test suite (repository root, 13 test files), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
  • D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. All 31 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness). Counted over 28 of the 45 production source files in this repository: 14 are under the ~2,400-byte size floor this dimension measures over, and the remaining 3 have no attributable history left to measure.
  • D19 Documentation Quality — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
  • D21 Naming Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D21's deterministic naming rules are gated on C# first (docs/plans/deterministic-engine.md, P5): each other language is switched on only after its own concept suite and A/B gate pass. Until then its declarations carry no naming verdict this run — this says nothing about whether its names are consistent.
  • D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict.
  • D24 Comment Value — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
  • D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
  • D44 Platform End-of-Life — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
  • AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • AXB1 Runtime evidence locked — no reproducible boot — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Subject: 1 markup document(s) — HTML, Razor, JSX, Vue, Svelte or server templates. The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, a Dockerfile, an npm dev script, a web service's own toolchain entry point (cargo, go, dotnet, Python, Spring Boot), or an Android app's own Gradle wrapper (run on an emulator); an Apple or Flutter app needs a host it lacks. None applied, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. Watchdog then boots it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
  • GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
  • X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, TypeScript/JavaScript, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X23 Unguarded diagnostic materialisation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart and Ruby source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart or Ruby was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go and JavaScript/TypeScript source only, and no C# was loaded and no PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go, JavaScript or TypeScript was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
  • X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
  • D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
  • D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
  • D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
  • D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
  • D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
  • P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
  • P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

Dimensions

D1 · Cyclomatic Complexity5.9 / 10Adequate✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.9 / 10 · rule-coverage 100% · ceiling Prevented

18 function(s) exceeded the cyclomatic complexity threshold of 15; the worst was spotify_tui::handlers::search_results::handler at 42. A further 8 function(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being Network::handle_network_event at 50 — they are counted neither in the figure above nor in this dimension's score. 5 files carry no cyclomatic complexity row at all for this reason — every one of their over-threshold functions was excluded, so the exclusion is disclosed nowhere in the file itself: src/network.rs (Network::handle_network_event at 50), src/handlers/mod.rs (spotify_tui::handlers::handle_block_events at 22), src/event/key.rs (Key::from at 19), src/handlers/common_key_events.rs (spotify_tui::handlers::common_key_events::handle_right_event at 18), src/ui/mod.rs (spotify_tui::ui::draw_routes at 17). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.

spotify_tui::handlers::search_results::handler (cyclomatic 42) · ×15src/handlers/search_results.rs:420
UserConfig::load_keybindings (cyclomatic 27) · ×2src/user_config.rs:335
Format::inner (cyclomatic 16)src/cli/util.rs:207

What to do

  1. Bring the 3 bodies over 30 down to 30 or less in Cyclomatic Complexity — start with spotify_tui::handlers::search_results::handler (cyclomatic 42), spotify_tui::handlers::track_table::handler (cyclomatic 40), spotify_tui::handlers::artist::handler (cyclomatic 31). — This score is capped by its worst body, so a finding fixed alone moves it by almost nothing — the next one down takes its place. Refactoring these 3 together lifts Cyclomatic Complexity from 5.9 to about 6.8/10, projected with the scoring formula itself and assuming each lands exactly at 30; a cleaner split scores higher.
  2. Enforce Cyclomatic Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

D2 · Cognitive Complexity2.6 / 10Weak✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 2.6 / 10 · rule-coverage 100% · ceiling Prevented

34 function(s) exceeded the cognitive complexity threshold of 15; the worst was spotify_tui::handlers::track_table::handler at 70.

spotify_tui::handlers::track_table::handler (cognitive 70) · ×25src/handlers/track_table.rs:10
App::current_user_saved_album_delete (cognitive 24) · ×4src/app.rs:849
UserConfig::load_keybindings (cognitive 26) · ×2src/user_config.rs:335
CliApp::play (cognitive 20) · ×2src/cli/cli_app.rs:503
Network::current_user_saved_tracks_contains (cognitive 16)src/network.rs:380

What to do

  1. Bring the 1 body over 60 down to 60 or less in Cognitive Complexity — start with spotify_tui::handlers::track_table::handler (cognitive 70). — Refactoring it lifts Cognitive Complexity from 2.6 to about 3.2/10.
  2. Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

D3 · God Classes7.7 / 10Strong✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.7 / 10 · rule-coverage 100% · ceiling Prevented

13 over-large unit(s) detected — types, modules or files that carry too much.

FileTooLong: ui/mod.rs · ×3src/ui/mod.rs
ClassTooLong: Network · ×3src/network.rs:117
FunctionTooLong: spotify_tui::ui::help::get_help_docs · ×3src/ui/help.rs:3
TooManyMethods: Network · ×2src/network.rs:117
TooManyFields: Appsrc/app.rs:259

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 3 FileTooLong finding(s) in God Classes — start with mod.rs, network.rs, app.rs. — One of this dimension's main actionable groups (3 warning-level).
  2. Resolve the 3 ClassTooLong finding(s) in God Classes — start with network.rs, app.rs, cli_app.rs. — One of this dimension's main actionable groups (3 warning-level).
  3. Resolve the 3 FunctionTooLong finding(s) in God Classes — start with help.rs, mod.rs, clap.rs. — One of this dimension's main actionable groups (3 warning-level).
  4. Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

D4 · Code Duplication9.5 / 10Stronggated by 14 serious findings✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Verified

14 duplicated block group(s) detected.

Duplicated block (6 lines × 2) · ×4src/app.rs:850
Duplicated block (24 lines × 2)src/ui/mod.rs:787
Duplicated block (20–23 lines × 2)src/handlers/track_table.rs:162
Duplicated block (16–18 lines × 2)src/network.rs:404
Duplicated block (16 lines × 2)src/handlers/basic_view.rs:6

+ 6 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 4 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with app.rs (2), cli_app.rs, util.rs. — One of this dimension's main actionable groups (4 warning-level).
  2. Resolve the 1 Duplicated block (24 lines × 2) finding(s) in Code Duplication — start with mod.rs. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 Duplicated block (20–23 lines × 2) finding(s) in Code Duplication — start with track_table.rs. — One of this dimension's main actionable groups (1 warning-level).
  4. Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

D6 · Cohesion (LCOM4)10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 8 classes have LCOM4 above 3.

✓ On the Gold path — maintain.

Detailed fixes: d6_recommendation.md.

D9 · Test Distribution10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

48 test methods: 48 unit, 0 integration, 0 BDD, 0 e2e. The Rust suite contributes 48 `#[test]` function(s) across 13 file(s) declaring at least one; its unit/integration split is Cargo's own — 0 of those file(s) are integration-test targets under a crate's tests/ directory, and the rest are #[test] functions compiled into the crate they test.

✓ On the Gold path — maintain.

Detailed fixes: d9_recommendation.md.

D12 · Dependency Hygiene9.8 / 10Exemplary✓ Tool-verified

What it measures: Whether dependencies are current, secure, and not bloated.

Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (saturating for vulnerabilities, capped-linear for deprecation/outdated) per KLoC. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Verified

4 outdated, 0 yanked direct Cargo dependencies. Only DIRECT edges are graded: a transitive crate cannot be moved past what its parent's requirement admits, so reporting one would be advice its owner cannot take. A newer release is reported only where this repository's OWN requirement already admits it, so the remedy is `cargo update` and never a manifest edit — which means a release outside the declared range is deliberately NOT charged, because a written-down constraint is a decision rather than a defect. Note that a bare requirement is a CARET, and for a 0.x crate its ceiling is the minor. Whether any crate is UNMAINTAINED is not graded — crates.io publishes no maintenance status, and release age does not stand in for one. Known CVEs in this dependency graph are D30's question, read from REDACTED there.

Outdated: anyhow · ×4

✓ On the Gold path — maintain.

Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

D14 · License Compliance10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 254 shipped crate(s) use a banned license. Licences were resolved from crates.io over the crates a consumer compiles — this repository's REDACTED closed over its manifests' `[dependencies]` and `[build-dependencies]`. Crates it asks for ONLY under `[dev-dependencies]` are excluded: they are not compiled by anything that depends on this repository. This repository publishes itself under MIT OR Apache-2.0, which is its own choice and is not judged here.

✓ On the Gold path — maintain.

Detailed fixes: d14_recommendation.md.

D15 · Churn × Complexity Hotspots9.8 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Documented

Top hotspots: src/main.rs (2×24=48)

Hotspot: src/main.rssrc/main.rs:267

What to do

  1. Resolve the 1 Hotspot finding(s) in Churn × Complexity Hotspots — start with main.rs. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.

D17 · Explicit Debt9.8 / 10Stronggated by 10 serious findings✓ Tool-verified

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Prevented

10 deducted task-comment markers across 11135 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

TodoComment · ×9src/app.rs:440
FixmeCommentsrc/config.rs:21

What to do

  1. Resolve the 9 TodoComment finding(s) in Explicit Debt — start with app.rs (2), network.rs (2), user_config.rs. — One of this dimension's main actionable groups (9 warning-level).
  2. Resolve the 1 FixmeComment finding(s) in Explicit Debt — start with config.rs. — One of this dimension's main actionable groups (1 warning-level).
  3. Enforce Explicit Debt in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.

D19 · Documentation Quality10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Every README, docs/ document and root guide parsed by its markup and measured in Unicode letters. Published: a runnable or packaged .NET project whose README (or a document it links, or a root guide) shows no example, and a root README naming none of three or more projects. Overview, licence, boilerplate, wall-of-text, empty-section and XML-doc rows are measured and withheld (counted in gaps) after adjudication. Deterministic, exhaustive, advisory.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

1 of 1 documentation facets pass in full. 1 document(s) read across 1 unit(s).

✓ On the Gold path — maintain.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 1 build units (Cargo) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

D29 · Static Analysis (SAST)3.4 / 10Weak✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 3.4 / 10 · rule-coverage 100% · ceiling Documented

38 finding(s): 0 critical, 24 high, 14 medium, 0 low. 22 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  2. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  3. No action in Static Analysis (SAST) — all 22 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (22 issue-level, 0 of them charged here).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities0.0 / 10Critical✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

40 finding(s): 3 critical, 7 high, 30 medium, 0 low.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 4 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (4). — One of this dimension's main actionable groups (4 issue-level).
  2. Resolve the 3 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
  3. Resolve the 3 High vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

D34 · Knowledge Freshness0.0 / 10Critical✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

31 of 31 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/ui/mod.rs. Counted over 31 of the 45 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned file · ×28src/handlers/search_results.rs:1
Most significant orphaned file · ×3src/ui/mod.rs:1
Dormant codebase

What to do

  1. Resolve the 28 Orphaned file finding(s) in Knowledge Freshness — start with util.rs (2), search_results.rs, cli_app.rs. — One of this dimension's main actionable groups (28 recommendation-level).
  2. Resolve the 3 Most significant orphaned file finding(s) in Knowledge Freshness — start with mod.rs, network.rs, app.rs. — One of this dimension's main actionable groups (3 recommendation-level).
  3. Resolve the 1 Dormant codebase finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

D36 · Supply-chain Provenance & Signing0.0 / 10Critical✓ Tool-verified

What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.

Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

0/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 2 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 warning-level).
  2. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
  3. Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX10 · Code composition9.8 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

  • The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

AX9 · CQS / query purity10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.

Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.

Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.

ES1 · Fold determinism10.0 / 10Exemplary✓ Tool-verified

Other · Event Sourcing — Whether the recovery-replay fold is deterministic — state derived purely from each event's own fields, no clock/random/IO on the replay path.

Method: Roslyn syntax scan (event-sourcing gated): Apply/When folds checked for forbidden tokens (DateTime.Now, Guid.NewGuid, Random, IO), stripped of comments/strings. Deterministic, hard fact per fold.

ES2 · Immutable events10.0 / 10Exemplary✓ Tool-verified

Other · Event Sourcing — Whether domain events stay immutable (private fields, set once) rather than carrying mutable state.

Method: Roslyn scan (event-sourcing gated): persisted events checked for public setters; immutability verified per property/field. Deterministic, hard fact.

M1 · Documentation (README)7.3 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
  • No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
  • Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

P2 · Observability0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

  • No logging call was found in the 45 Rust production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (Rust: the log and tracing crates (info!/warn!/error!, #[instrument]), slog, env_logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.

What to do

  • Adopt `tracing` with `tracing-subscriber` (JSON output) and log at meaningful points in the binaries you run.
  • Consider OpenTelemetry tracing/metrics (opentelemetry with tracing-opentelemetry) and a health-check endpoint (a /health route on your axum/actix router) for operability.
P3 · Security & performance tooling7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

  • Dependabot is configured but does not watch `github-actions` — add that `package-ecosystem` entry to REDACTED so those dependencies get the same automatic update and advisory pressure as the ones it already covers.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

  • The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.

What to do

  • Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `for` loop leaves the `RefCell` it is walking alone — safe Rust rejects a body that changes the collection its loop borrows at compile time, except through interior mutability: a `RefCell` borrowed in the loop's header stays borrowed until the loop ends, so a `borrow_mut()` of it inside the body panics with `already borrowed: BorrowMutError` and the remaining elements are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health84%Adequate — gated by D2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture99%ExemplarySolid.
Maturity44%Adequate — gated by D34, M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness57%Adequate — gated by P2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security47%Weak — gated by D29, D30, D36Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Event Sourcing100%ExemplaryStrongest area.
Performance100%ExemplarySolid.
Not evidenced — 1 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 74 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC2 Forms & labels — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC3 Page structure — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC4 Keyboard semantics — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC5 ARIA correctness — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC6 Visual & motion safety — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC7 A11y enforcement — Frontend below the scale floor (11 DOM element(s) < 25) — too little surface to assess accessibility.
  • AX1 Captive dependencies — Not applicable: Rust with no dependency-injection crate has no container to hand one lifetime's instance to another — every value is owned by the code that builds it, and the borrow checker rejects a longer-lived value keeping a borrow of a shorter-lived one.
  • AX2 Stateful singletons — Not applicable: Rust's compiler refuses unsynchronised shared mutation — a value shared across threads must be Sync — so the race this check looks for cannot be written.
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — no test/production split to check
  • AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no data at rest for these controls to protect.
  • C2 Access Controls — No access-control surface detected in the analyzed source — this repository starts no server another machine can reach (no actix-web HttpServer, axum::serve, Rocket launch, warp::serve, poem or salvo Server, tonic Server::builder, hyper or tiny_http server outside examples and tests, none bound beyond loopback). Access control is therefore N/A here — a crate is authorized by the application that serves it, not by itself. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
  • C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
  • C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound.
  • C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over.
  • D10 Test Quality — ~0 lines of test source are present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
  • D11 Test Reliability — Test reliability not included — the .rs suite was found but not re-run
  • D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D21 Naming Consistency — Naming consistency is measured on C# only; Rust not measured.
  • D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
  • D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — D24 reads C# and Visual Basic comments only — this repository's production source is .rs, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D25 ADR Conformance — no ADRs to check
  • D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.rs), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
  • D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
  • D5 Coupling — Not applicable — this Cargo build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • D8 Code Coverage — Coverage not included — suite not readable by the collector
  • DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this lens looks for (1 domain event(s); its domain events are published by services or handlers — no domain entity raises one)
  • ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and a call made through an inferred or generic receiver has no resolvable owner in the source. Reported as guidance rather than measured
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
  • IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • M4 Documentation accuracy — Not applicable: the 1 current-state document(s) make no claim of a kind M4 checks.
  • P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
  • P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Rust source, so there is no service whose uptime a failing dependency could take down
  • P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `#[bench]`, criterion's `bench_function`/`bench_with_input`, `#[divan::bench]` or `#[library_benchmark]` in any `.rs` file, or criterion, divan, iai or a `[[bench]]` target in a Cargo.toml, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
  • PF2 Allocation hygiene — Not applicable: Rust spells out every heap allocation and makes borrowed slices (&[T], &str) its ordinary parameter types, so the allocation-aware style this card rewards elsewhere is the language's baseline rather than a rung to climb.
  • S1 Web-Security Posture — No web surface: 45 Rust file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. This repository serves no HTTP of its own — no HTTP-server crate (actix-web, axum, Rocket, warp, poem, tide, salvo, tonic, a hyper server, …) among its Cargo manifests' run-time dependencies, and no server started in its production source — so HTTPS enforcement, HSTS, cookie flags and input validation are N/A here, as they are for a C# library or worker. If this codebase starts serving HTTP, the dimension reactivates automatically.
  • X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X12 Unreachable branch — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X13 Undrained process stream — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X17 Uncapped recursion over a caller-supplied document — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X19 Unrestored process-global state — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X2 Cancellation propagation — no C# was loaded; this repository's Rust was read, and no request in it can be cancelled by a caller — a Rust request takes no token: a future is cancelled by dropping it, from outside the call (select!, a timeout, an aborted task), and reqwest, hyper and tonic take none
  • X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X22 Contradicted release guard — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X23 Unguarded diagnostic materialisation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X25 Inert configuration knob — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. Rust's compiler refuses the unsynchronised version: a collection shared between a callback's thread and the waiting body must be `Sync`, which a `Vec`, `VecDeque` or `HashMap` is only behind a `Mutex`/`RwLock`, so the race this check looks for cannot be written in safe Rust. Not a gap in the analyzer and not a finding about your code.
  • X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Rust was read, and it logs through none: the `log` crate's macros take one finished message (as log4net does in C#; its `kv` values are an opt-in its backends mostly drop), `println!`/`eprintln!` are not loggers, or it makes no log call outside its tests and examples at all. Calls through `tracing` (`tracing::info!`, or `info!` imported from it) would be judged.
  • X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 34 finding(s)
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · High CVE · ×4
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Critical CVE · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · High vulnerability · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
Serious — 139 finding(s)
D2 · Cognitive Complexity · spotify_tui · ×25
  • spotify_tui::handlers::track_table::handler (cognitive 70) src/handlers/track_table.rs:10 — spotify_tui::handlers::track_table::handler has cognitive complexity 70 (threshold 15). Drivers by points: if/else 12 (59 pts), match/switch 5 (11 pts) (nesting depth added 53). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident. This file is where this pass's cognitive complexity CONCENTRATES: src/handlers/track_table.rs holds 4 of the 34 functions over the threshold — including the worst — and 90 of the 355 points over it (25%), 2.3× the next-largest file (src/handlers/album_tracks.rs at 39). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
  • spotify_tui::start_ui (cognitive 49) src/main.rs:267 — spotify_tui::start_ui has cognitive complexity 49 (threshold 15). Drivers by points: if/else 17 (38 pts), match/switch 3 (9 pts), boolean chains 1, loops 1 (nesting depth added 27). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • spotify_tui::handlers::album_tracks::handler (cognitive 41) src/handlers/album_tracks.rs:8 — spotify_tui::handlers::album_tracks::handler has cognitive complexity 41 (threshold 15). Drivers by points: if/else 10 (32 pts), match/switch 5 (9 pts) (nesting depth added 26). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::artist::handler (cognitive 41) src/handlers/artist.rs:235 — spotify_tui::handlers::artist::handler has cognitive complexity 41 (threshold 15). Drivers by points: if/else 13 (32 pts), match/switch 4 (9 pts) (nesting depth added 24). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • spotify_tui::cli::handle::handle_matches (cognitive 37) src/cli/handle.rs:13 — spotify_tui::cli::handle::handle_matches has cognitive complexity 37 (threshold 15). Drivers by points: if/else 17 (28 pts), loops 2 (6 pts), match/switch 2, boolean chains 1 (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • spotify_tui::handlers::recently_played::handler (cognitive 36) src/handlers/recently_played.rs:4 — spotify_tui::handlers::recently_played::handler has cognitive complexity 36 (threshold 15). Drivers by points: if/else 14 (35 pts), match/switch 1 (nesting depth added 21). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::track_table::play_random_song (cognitive 35) src/handlers/track_table.rs:157 — spotify_tui::handlers::track_table::play_random_song has cognitive complexity 35 (threshold 15). Drivers by points: if/else 10 (27 pts), match/switch 3 (8 pts) (nesting depth added 22). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body. This file is where this pass's cognitive complexity CONCENTRATES: src/handlers/track_table.rs holds 4 of the 34 functions over the threshold — including the worst — and 90 of the 355 points over it (25%), 2.3× the next-largest file (src/handlers/album_tracks.rs at 39). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
  • spotify_tui::handlers::select_device::handler (cognitive 31) src/handlers/select_device.rs:8 — spotify_tui::handlers::select_device::handler has cognitive complexity 31 (threshold 15). Drivers by points: if/else 7 (20 pts), match/switch 6 (11 pts) (nesting depth added 18). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::ui::draw_playbar (cognitive 29) src/ui/mod.rs:925 — spotify_tui::ui::draw_playbar has cognitive complexity 29 (threshold 15). Drivers by points: if/else 10 (19 pts), match/switch 4 (10 pts) (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • spotify_tui::ui::draw_table (cognitive 26) src/ui/mod.rs:1752 — spotify_tui::ui::draw_table has cognitive complexity 26 (threshold 15). Drivers by points: if/else 9 (24 pts), match/switch 2 (nesting depth added 15). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
  • spotify_tui::handlers::search_results::handle_enter_event_on_selected_block (cognitive 25) src/handlers/search_results.rs:286 — spotify_tui::handlers::search_results::handle_enter_event_on_selected_block has cognitive complexity 25 (threshold 15). Drivers by points: if/else 9 (24 pts), match/switch 1 (nesting depth added 15). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::search_results::handler (cognitive 25) src/handlers/search_results.rs:420 — spotify_tui::handlers::search_results::handler has cognitive complexity 25 (threshold 15). Drivers by points: if/else 8 (15 pts), match/switch 6 (10 pts) (nesting depth added 11). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::album_tracks::handle_recommended_tracks (cognitive 24) src/handlers/album_tracks.rs:162 — spotify_tui::handlers::album_tracks::handle_recommended_tracks has cognitive complexity 24 (threshold 15). Drivers by points: if/else 7 (23 pts), match/switch 1 (nesting depth added 16). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::track_table::on_enter (cognitive 23) src/handlers/track_table.rs:311 — spotify_tui::handlers::track_table::on_enter has cognitive complexity 23 (threshold 15). Drivers by points: if/else 4 (12 pts), match/switch 4 (11 pts) (nesting depth added 15). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident. This file is where this pass's cognitive complexity CONCENTRATES: src/handlers/track_table.rs holds 4 of the 34 functions over the threshold — including the worst — and 90 of the 355 points over it (25%), 2.3× the next-largest file (src/handlers/album_tracks.rs at 39). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
  • spotify_tui::handlers::track_table::on_queue (cognitive 22) src/handlers/track_table.rs:417 — spotify_tui::handlers::track_table::on_queue has cognitive complexity 22 (threshold 15). Drivers by points: if/else 6 (19 pts), match/switch 2 (3 pts) (nesting depth added 14). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident. This file is where this pass's cognitive complexity CONCENTRATES: src/handlers/track_table.rs holds 4 of the 34 functions over the threshold — including the worst — and 90 of the 355 points over it (25%), 2.3× the next-largest file (src/handlers/album_tracks.rs at 39). No single row can show this, because each is measured only against the threshold: reducing this one file moves this dimension further than any other file in the repository.
  • spotify_tui::handlers::album_tracks::handle_save_event (cognitive 19) src/handlers/album_tracks.rs:200 — spotify_tui::handlers::album_tracks::handle_save_event has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (18 pts), match/switch 1 (nesting depth added 12). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::playlist::handler (cognitive 19) src/handlers/playlist.rs:9 — spotify_tui::handlers::playlist::handler has cognitive complexity 19 (threshold 15). Drivers by points: if/else 4 (10 pts), match/switch 6 (9 pts) (nesting depth added 9). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::search_results::handle_recommended_tracks (cognitive 19) src/handlers/search_results.rs:385 — spotify_tui::handlers::search_results::handle_recommended_tracks has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (18 pts), match/switch 1 (nesting depth added 12). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::ui::draw_search_results (cognitive 19) src/ui/mod.rs:364 — spotify_tui::ui::draw_search_results has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (13 pts), match/switch 6 (nesting depth added 7). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::input::handler (cognitive 18) src/handlers/input.rs:10 — spotify_tui::handlers::input::handler has cognitive complexity 18 (threshold 15). Drivers by points: if/else 5 (10 pts), match/switch 3 (5 pts), boolean chains 3 (nesting depth added 7). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::artists::handler (cognitive 17) src/handlers/artists.rs:8 — spotify_tui::handlers::artists::handler has cognitive complexity 17 (threshold 15). Drivers by points: if/else 8 (16 pts), match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::album_list::handler (cognitive 16) src/handlers/album_list.rs:7 — spotify_tui::handlers::album_list::handler has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (15 pts), match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::made_for_you::handler (cognitive 16) src/handlers/made_for_you.rs:8 — spotify_tui::handlers::made_for_you::handler has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (15 pts), match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::handlers::podcasts::handler (cognitive 16) src/handlers/podcasts.rs:8 — spotify_tui::handlers::podcasts::handler has cognitive complexity 16 (threshold 15). Drivers by points: if/else 7 (15 pts), match/switch 1 (nesting depth added 8). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • spotify_tui::ui::draw_artist_albums (cognitive 16) src/ui/mod.rs:1182 — spotify_tui::ui::draw_artist_albums has cognitive complexity 16 (threshold 15). Drivers by points: if/else 6 (13 pts), match/switch 1 (3 pts) (nesting depth added 9). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.
D1 · Cyclomatic Complexity · spotify_tui · ×15
  • spotify_tui::handlers::search_results::handler (cyclomatic 42) src/handlers/search_results.rs:420 — spotify_tui::handlers::search_results::handler has cyclomatic complexity 42 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
  • spotify_tui::handlers::track_table::handler (cyclomatic 40) src/handlers/track_table.rs:10 — spotify_tui::handlers::track_table::handler has cyclomatic complexity 40 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::artist::handler (cyclomatic 31) src/handlers/artist.rs:235 — spotify_tui::handlers::artist::handler has cyclomatic complexity 31 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::album_tracks::handler (cyclomatic 26) src/handlers/album_tracks.rs:8 — spotify_tui::handlers::album_tracks::handler has cyclomatic complexity 26 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::cli::handle::handle_matches (cyclomatic 25) src/cli/handle.rs:13 — spotify_tui::cli::handle::handle_matches has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::recently_played::handler (cyclomatic 25) src/handlers/recently_played.rs:4 — spotify_tui::handlers::recently_played::handler has cyclomatic complexity 25 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::start_ui (cyclomatic 24) src/main.rs:267 — spotify_tui::start_ui has cyclomatic complexity 24 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::input::handler (cyclomatic 24) src/handlers/input.rs:10 — spotify_tui::handlers::input::handler has cyclomatic complexity 24 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
  • spotify_tui::handlers::artists::handler (cyclomatic 21) src/handlers/artists.rs:8 — spotify_tui::handlers::artists::handler has cyclomatic complexity 21 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::episode_table::handler (cyclomatic 20) REDACTED:9 — spotify_tui::handlers::episode_table::handler has cyclomatic complexity 20 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
  • spotify_tui::handlers::select_device::handler (cyclomatic 20) src/handlers/select_device.rs:8 — spotify_tui::handlers::select_device::handler has cyclomatic complexity 20 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::album_list::handler (cyclomatic 18) src/handlers/album_list.rs:7 — spotify_tui::handlers::album_list::handler has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::playlist::handler (cyclomatic 18) src/handlers/playlist.rs:9 — spotify_tui::handlers::playlist::handler has cyclomatic complexity 18 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
  • spotify_tui::handlers::podcasts::handler (cyclomatic 18) src/handlers/podcasts.rs:8 — spotify_tui::handlers::podcasts::handler has cyclomatic complexity 18 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
  • spotify_tui::handlers::track_table::play_random_song (cyclomatic 16) src/handlers/track_table.rs:157 — spotify_tui::handlers::track_table::play_random_song has cyclomatic complexity 16 (threshold 15). To reduce it, separate the cases: extract each independent branch into its own named function, and where the body has guards that only reject input, fold those into early returns at the top.
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Medium advisory (unmaintained) · ×11
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D17 · Explicit Debt · TodoComment · ×9
  • TodoComment src/app.rs:440 — // TODO: handle error — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/app.rs:1114 — // TODO: replace searches when relevant endpoint is added — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/network.rs:1082 — // TODO: This should ideally use the same logic as `self.current_user_saved_tracks_contains` — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/network.rs:1476 — // TODO panic! — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/user_config.rs:133 — // TODO: Add pretty print for key — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/ui/mod.rs:1657 — //TODO — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/handlers/common_key_events.rs:144 — // TODO: This should send you back to either library or playlist based on last selection — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment src/handlers/empty.rs:92 — // TODO: test the other cases when they are implemented — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
  • TodoComment REDACTED:116 — //TODO: reverse whole list and not just currently visible episodes — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
D30 · Dependency Vulnerabilities · Medium CVE · ×8
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Medium advisory (unsound) · ×6
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Medium vulnerability · ×5
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D2 · Cognitive Complexity · App · ×4
  • App::current_user_saved_album_delete (cognitive 24) src/app.rs:849 — App::current_user_saved_album_delete has cognitive complexity 24 (threshold 15). Drivers by points: if/else 8 (23 pts), match/switch 1 (nesting depth added 15). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • App::current_user_saved_album_add (cognitive 19) src/app.rs:882 — App::current_user_saved_album_add has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (18 pts), match/switch 1 (nesting depth added 12). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • App::user_unfollow_show (cognitive 19) src/app.rs:1077 — App::user_unfollow_show has cognitive complexity 19 (threshold 15). Drivers by points: if/else 6 (16 pts), match/switch 2 (3 pts) (nesting depth added 11). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • App::user_follow_show (cognitive 18) src/app.rs:1048 — App::user_follow_show has cognitive complexity 18 (threshold 15). Drivers by points: if/else 5 (15 pts), match/switch 2 (3 pts) (nesting depth added 11). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
D4 · Code Duplication · Duplicated block (6 lines × 2) · ×4
  • Duplicated block (6 lines × 2) src/app.rs:850 — src/app.rs:850-855 | src/app.rs:883-888 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (6 lines × 2) src/app.rs:954 — src/app.rs:954-959 | src/app.rs:984-989 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (6 lines × 2) src/cli/cli_app.rs:419 — src/cli/cli_app.rs:419-424 | src/cli/cli_app.rs:431-436 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
  • Duplicated block (6 lines × 2) src/cli/util.rs:162 — src/cli/util.rs:162-167 | src/ui/util.rs:42-48 — the copies span different directories, so extracting a shared function means choosing where it lives: put it somewhere both call sites can already reach — a location they all depend on today, or a new shared one if there is none — and call it from each site; until then, every change has to be made twice.
D3 · God Classes · FileTooLong · ×3
  • FileTooLong: ui/mod.rs src/ui/mod.rs — FileTooLong — 1319 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted). The bar is 500 significant lines; this is 819 over it, 2.64× the bar. To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.
  • FileTooLong: src/network.rs src/network.rs — FileTooLong — 1007 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 90% of them inside a single declaration: Network (2 blocks, 117-1492). The bar is 500 significant lines; this is 507 over it, 2.01× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
  • FileTooLong: src/app.rs src/app.rs — FileTooLong — 817 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), about 76% of them inside a single declaration: App (3 blocks, 259-1195). The bar is 500 significant lines; this is 317 over it, 1.63× the bar. Moving the declarations that sit BESIDE it into sibling files will not shorten this file. Extract from INSIDE that declaration instead: lift each cohesive group of its body — the parts that share the same inputs and are named together — into its own unit in a sibling file, and have the original call them.
D3 · God Classes · ClassTooLong · ×3
  • ClassTooLong: Network src/network.rs:117 — ClassTooLong — 907 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 54 methods, 2 blocks, lines 117-1492. The bar is 400 significant lines; this is 507 over it, 2.27× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: App src/app.rs:259 — ClassTooLong — 621 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 50 methods, 3 blocks, lines 259-1195. The bar is 400 significant lines; this is 221 over it, 1.55× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • ClassTooLong: CliApp src/cli/cli_app.rs:10 — ClassTooLong — 440 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted), 18 methods, 2 blocks, lines 10-663. The bar is 400 significant lines; this is 40 over it, 1.10× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
D3 · God Classes · FunctionTooLong · ×3
  • FunctionTooLong: spotify_tui::ui::help::get_help_docs src/ui/help.rs:3 — FunctionTooLong — spotify_tui::ui::help::get_help_docs runs 214 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 114 over it, 2.14× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • FunctionTooLong: spotify_tui::ui::draw_search_results src/ui/mod.rs:364 — FunctionTooLong — spotify_tui::ui::draw_search_results runs 135 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 35 over it, 1.35× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
  • FunctionTooLong: spotify_tui::cli::clap::playback_subcommand src/cli/clap.rs:26 — FunctionTooLong — spotify_tui::cli::clap::playback_subcommand runs 125 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 25 over it, 1.25× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
D1 · Cyclomatic Complexity · UserConfig · ×2
  • UserConfig::load_keybindings (cyclomatic 27) src/user_config.rs:335 — UserConfig::load_keybindings has cyclomatic complexity 27 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
  • UserConfig::load_behaviorconfig (cyclomatic 16) src/user_config.rs:401 — UserConfig::load_behaviorconfig has cyclomatic complexity 16 (threshold 15). To reduce it, split the body: these branches sit side by side rather than nested inside one another, so extracting each one on its own would leave a function per branch. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages. This is NOT this file's highest cyclomatic complexity: spotify_tui::user_config::parse_theme_item (cyclomatic 19) is higher and carries no row of its own — it was excluded as a flat dispatcher (a long switch/match over independent cases: many branches, almost no nesting), which this dimension does not treat as a refactor obligation. It is named here so the ranking you see in this file is not mistaken for the whole of it; the excluded function is counted neither in this dimension's figures nor in its score.
D2 · Cognitive Complexity · UserConfig · ×2
  • UserConfig::load_keybindings (cognitive 26) src/user_config.rs:335 — UserConfig::load_keybindings has cognitive complexity 26 (threshold 15). Drivers by points: if/else 26. To reduce it, split the body: this score is breadth rather than depth — many checks laid out side by side rather than nested inside one another, so inverting conditions into early returns has nothing left to flatten. Group the statements between the checks into named steps and move each step into its own function, so the body reads as a short sequence of named stages.
  • UserConfig::load_behaviorconfig (cognitive 18) src/user_config.rs:401 — UserConfig::load_behaviorconfig has cognitive complexity 18 (threshold 15). Drivers by points: if/else 16 (18 pts) (nesting depth added 2). To reduce it, split the body: most of this score is breadth rather than depth — checks laid out side by side rather than stacked — so group the statements between the checks into named steps and move each step into its own function. Some of it IS depth: where a check sits inside another whose only job is to reach it, merge the two into one condition, and where an else follows a branch that already returns, drop the trailing else and let the rest of the body continue at one level.
D2 · Cognitive Complexity · CliApp · ×2
  • CliApp::play (cognitive 20) src/cli/cli_app.rs:503 — CliApp::play has cognitive complexity 20 (threshold 15). Drivers by points: if/else 12 (19 pts), match/switch 1 (nesting depth added 7). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
  • CliApp::query (cognitive 16) src/cli/cli_app.rs:566 — CliApp::query has cognitive complexity 16 (threshold 15). Drivers by points: if/else 10 (15 pts), match/switch 1 (nesting depth added 5). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
D3 · God Classes · TooManyMethods · ×2
  • TooManyMethods: Network src/network.rs:117 — TooManyMethods — 54 methods. The bar is 30 methods; this is 24 over it, 1.80× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
  • TooManyMethods: App src/app.rs:259 — TooManyMethods — 50 methods. The bar is 30 methods; this is 20 over it, 1.67× the bar. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
D36 · Supply-chain Provenance & Signing REDACTED · ×2
  • REDACTED
  • REDACTED
D1 · Cyclomatic Complexity · Format · ×1
  • Format::inner (cyclomatic 16) src/cli/util.rs:207 — Format::inner has cyclomatic complexity 16 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.
D15 · Churn × Complexity Hotspots · Hotspot · ×1
  • Hotspot: src/main.rs src/main.rs:267 — src/main.rs changed 2 times in last 90 days, and the most complex body those changes touched has cyclomatic complexity 24 in spotify_tui::start_ui at line 267. Frequent change and high complexity in one file compound: schedule the next change to it to include carving out the part being edited, with the area under test before it moves. Counted over 2021-08-19..2021-11-17, the 90 days ending at the analysed commit. Reproduce with `git log --since='2021-08-19 20:29:15 +00:00' --until='2021-11-17 20:29:15 +00:00' --full-history --no-merges -- src/main.rs`: merges are excluded because a merge re-states changes already counted at their own commits, and history is NOT path-simplified because a change that reached the file through a merged branch is still a change to it. That command counts raw commits and can read HIGHER than this row, which counts a cherry-picked re-land, and a revert together with the commit it undoes, once each — a difference of several commits on a file whose history was re-landed or reverted inside the window.
D17 · Explicit Debt · FixmeComment · ×1
  • FixmeComment src/config.rs:21 — // FIXME: port should be defined in `user_config` not in here — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
D2 · Cognitive Complexity · Network · ×1
  • Network::current_user_saved_tracks_contains (cognitive 16) src/network.rs:380 — Network::current_user_saved_tracks_contains has cognitive complexity 16 (threshold 15). Drivers by points: if/else 4 (13 pts), loops 1 (2 pts), match/switch 1 (nesting depth added 10). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D3 · God Classes · TooManyFields · ×1
  • TooManyFields: App src/app.rs:259 — TooManyFields — 61 stored fields beside 50 methods. The bar is 30 stored fields; this is 31 over it, 2.03× the bar. This is width in DATA, not behaviour: every reader that takes the whole type couples to all of its fields, so a change to any one of them is a change every reader has to be checked against. To reduce it, group the fields that are read together by the same callers into a smaller type of their own, and have this one hold that type as a single member — each reader then names only the group it uses.
D3 · God Classes · MethodTooLong · ×1
  • MethodTooLong: Network.handle_network_event src/network.rs:144 — MethodTooLong — handle_network_event runs 113 significant lines (blank, comment-only and punctuation-only lines excluded, and inline test code — #[cfg(test)] modules and bare #[test] functions — not counted) in one body. The bar is 100 significant lines; this is 13 over it, 1.13× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D4 · Code Duplication · Duplicated block (24 lines × 2) · ×1
  • Duplicated block (24 lines × 2) src/ui/mod.rs:787 — src/ui/mod.rs:787-810 | src/ui/mod.rs:866-889 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (20–23 lines × 2) · ×1
  • Duplicated block (20–23 lines × 2) src/handlers/track_table.rs:162 — src/handlers/track_table.rs:162-181 | src/handlers/track_table.rs:206-228 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (16–18 lines × 2) · ×1
  • Duplicated block (16–18 lines × 2) src/network.rs:404 — src/network.rs:404-419 | src/network.rs:460-477 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (16 lines × 2) · ×1
  • Duplicated block (16 lines × 2) src/handlers/basic_view.rs:6 — src/handlers/basic_view.rs:6-21 | src/handlers/playbar.rs:15-30 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
D4 · Code Duplication · Duplicated block (15 lines × 2) · ×1
  • Duplicated block (15 lines × 2) src/config.rs:49 — src/config.rs:49-63 | src/user_config.rs:309-323 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.
D4 · Code Duplication · Duplicated block (12–13 lines × 2) · ×1
  • Duplicated block (12–13 lines × 2) src/network.rs:488 — src/network.rs:488-500 | src/network.rs:1132-1143 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (12 lines × 2) · ×1
  • Duplicated block (12 lines × 2) src/app.rs:676 — src/app.rs:676-687 | src/app.rs:707-718 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (10 lines × 3) · ×1
  • Duplicated block (10 lines × 3) src/app.rs:827 — src/app.rs:827-836 | src/app.rs:908-917 | src/app.rs:931-940 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
D4 · Code Duplication · Duplicated block (10 lines × 2) · ×1
  • Duplicated block (10 lines × 2) src/handlers/track_table.rs:322 — src/handlers/track_table.rs:322-331 | src/handlers/track_table.rs:375-385 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
D4 · Code Duplication · Duplicated block (7–9 lines × 3) · ×1
  • Duplicated block (7–9 lines × 3) src/handlers/track_table.rs:44 — src/handlers/track_table.rs:44-52 | src/handlers/track_table.rs:279-285 | src/handlers/track_table.rs:469-475 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
P2 · Observability · No structured logging · ×1
  • No structured logging — No logging call was found in the 45 Rust production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (Rust: the log and tracing crates (info!/warn!/error!, #[instrument]), slog, env_logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
Minor — 39 finding(s)
D34 · Knowledge Freshness · Orphaned file · ×28
  • Orphaned file src/handlers/search_results.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/cli/cli_app.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/user_config.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/track_table.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/input.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/main.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/artist.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/cli/clap.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/album_tracks.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/ui/help.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/mod.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/cli/util.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/config.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/empty.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/common_key_events.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/cli/handle.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/ui/audio_analysis.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file REDACTED:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/recently_played.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/ui/util.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/event/key.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/album_list.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/artists.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/playlist.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/handlers/library.rs:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • + 3 more in this group — see findings.md.
D34 · Knowledge Freshness · Most significant orphaned file · ×3
  • Most significant orphaned file src/ui/mod.rs:1 — One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
  • Most significant orphaned file src/network.rs:1 — One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
  • Most significant orphaned file src/app.rs:1 — One of the orphaned files carrying the most lost knowledge — ranked by size weighted by the file's role in the codebase, the same weighting behind the score above, so core code outranks equally large plumbing. A reasonable place to start a read-through before the aggregate risk above bites.
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.
D34 · Knowledge Freshness · Dormant codebase · ×1
  • Dormant codebase — 31 of 31 significant files have no living knowledge — the codebase as a whole is dormant, not 31 separate risks. Counted over 31 of the 45 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over. Re-engage owners or document before change.
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
D36 · Supply-chain Provenance & Signing · REDACTED · ×1
  • REDACTED
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation · No architecture diagram/doc · ×1
  • No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
P4 · Deployment & Rollback · No release approval gate · ×1
  • No release approval gate — The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
Minor — 4 finding(s)
D12 · Dependency Hygiene · Outdated · ×4
  • Outdated: anyhow — `anyhow` is locked at 1.0.43 but 1.0.104 is the current stable release on crates.io, and it already satisfies the `"1.0.43"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p anyhow` and commit the updated REDACTED.
  • Outdated: backtrace — `backtrace` is locked at 0.3.57 but 0.3.76 is the current stable release on crates.io, and it already satisfies the `"0.3.57"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p backtrace` and commit the updated REDACTED.
  • Outdated: serde — `serde` is locked at 1.0.128 but 1.0.229 is the current stable release on crates.io, and it already satisfies the `"1.0"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde` and commit the updated REDACTED.
  • Outdated: serde_json — `serde_json` is locked at 1.0.67 but 1.0.154 is the current stable release on crates.io, and it already satisfies the `"1.0"` requirement declared in Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_json` and commit the updated REDACTED.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-2a48ff30ac5e453ba05a717653417442/history.json --exit-code 0 --source .0artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-2a48ff30ac5e453ba05a717653417442/tree.json --exit-code 0 --source .0artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt .38artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .40artifacts/raw/osv-scanner.json
D31 · IaC & Container Securitytrivy—trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.0—
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—
D43 · Malicious Dependenciesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .0artifacts/raw/osv-scanner.json

Run 01a1763e-c22f-7817-a58c-81255ffb9b3b · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 34 · Warnings: 139 · Recommendations: 39 · Info: 4 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 26-10-2026 @ 03:26 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md