cosmonic-labs/concordance

Executive summary

cosmonic-labs/concordance scores 53 out of 100 and is rated Adequate, while four of its six lenses score higher still: Performance at 100 and Architecture at 92, both rated Exemplary, and Security and Compliance at 76 and Code Health at 74, both rated Adequate.

The score is lower than those four because the weakest lens counts most, and here that is Production Readiness, which scores 36 and is rated Weak. Its CI/CD gates dimension scores 0 out of 10, and until that reaches 4, Production Readiness can't be rated higher than Adequate. The first actions are to resolve the 1 No ADRs found finding(s) in ADR Quality and to resolve the 1 Banned license finding(s) in License Compliance, and if Production Readiness rose to 70, the score would rise from 53 to about 65.

Ten findings are critical: seven in Dependency Vulnerabilities, two in Secrets (history) and one in License Compliance.

Watchdog couldn't measure 21 dimensions in this code, among them Code Coverage, Test Reliability and Documentation Quality, so they are left out of the score. The product code is 3,636 lines, which would take an estimated 0.1 person-years, around €4,700, to rebuild.

Code Health 74 Adequate, capped by Structured logging Architecture 92 ★ Exemplary Maturity 53 Adequate, capped by Architecture documentation Production Readiness 36 Weak, capped by CI/CD gates and Security & performance tooling Security and Compliance 76 Adequate, capped by Dependency Vulnerabilities Performance 100 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.

Production Readiness 36 · counts for 46%Maturity 53 · counts for 25%Code Health 74 · counts for 14%Security and Compliance 76 · counts for 8%Architecture 92 · counts for 4%Performance 100 · counts for 2%

If Production Readiness rose from 36 to 70, the lowest score rated Strong, the score would rise from 53 to about 65.

Code composition: what the lines of code are

Product code 74%Tests 26%

New since the last survey: 2 findings

These 2 critical or serious findings weren't in the previous survey, on 7 October 2026.

Dependency Vulnerabilities · REDACTED
Dependency Vulnerabilities · REDACTED

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Rebuild cost: about €4,700 · Estimate

Cost to rebuild	€1,600 to €7,900, for 26 to 83 hours of work, about 0.1 person-years for one engineer
Difficulty of the problem	Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor	×0.7 at a score of 53. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
Size	Small: 3,636 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

Resolve the 1 No ADRs found finding(s) in ADR Quality.

Raises the score by about 7 points · Low effort · ADR Quality

Resolve the 1 Banned license finding(s) in License Compliance.

Raises the score by about 5 points · Low effort · License Compliance

Add a CI workflow that builds and runs the test suite on every push/PR.

Raises the score by about 7 points · Medium effort · CI/CD gates

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk

This code would cost about €4,700 to build again, about 0.1 person-years of work. Its weakest lens is Production Readiness, at 36 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.

Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts

What to do: Start with the Production Readiness actions in Top priorities.

If you do one thing first · First action

Resolve the 1 No ADRs found finding(s) in ADR Quality. Of all the actions in this report, it raises the score most for the work it takes: about 7 points for low effort, because it clears the 1 ADR Quality findings. The next survey will show the change in the score.

Based on: the ranked actions in Top priorities, by score gain and effort

Architecture — module dependency graph

Project dependencies, layered top-to-bottom; arrows show direction. Any dashed red edge points upward or sideways — a layering smell or cycle. A clean layered graph has none.

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

29 modules, with 47 dependencies between them. One loop runs through 2 of the modules, marked above the diagonal.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →	3 concordance.config	4 concordance.eventsourcing	5 concordance.natsclient	10 concordance.consumers	11 concordance.consumers.manager	12 concordance.state	14 concordance_gen_core.model.eventcatalog	15 concordance.consumers.command_consumer	24 concordance_gen_core.model
1 concordance.bin.bootstrap
2 concordance.bin.concordance
3 concordance.config
4 concordance.eventsourcing
5 concordance.natsclient
6 concordance.natsclient.natsconn
7 concordance_gen
8 concordance_gen_core.generator
9 concordance_gen_core.templates
10 concordance.consumers	1		1
11 concordance.consumers.manager	2
12 concordance.state	2
13 concordance_gen.eventsourcing		24
14 concordance_gen_core.model.eventcatalog									3
15 concordance.consumers.command_consumer	1			1
16 concordance.consumers.event_consumer	1			1
17 concordance.wcprovider	2				1	1
18 concordance.workers.aggregate_command	1		1	1		1
19 concordance.workers.aggregate_event	1		1	1		1
20 concordance.workers.general_event	1		1	1		1
21 concordance.workers.notifier	1		1	1		1
22 concordance.workers.process_manager	1	1	1	1		1
23 concordance.workers.projector	1		1	1		1
24 concordance_gen_core.model							4
25 concordance_gen_macro							1
26 concordance.events								1
27 concordance_gen_core.generator.aggregate							1		3
28 concordance_gen_core.generator.genhandler							1		2
29 concordance_gen_core.generator.procmgr							1		2

Uses a module listed above itPart of a loopThe module itself

At a glance — Code Health · 74% · Adequate · gated by X4 ·

The Good

D1 · Rust Cyclomatic Complexity 10.0 D2 · Rust Cognitive Complexity 9.7 D3 · Rust God Classes 10.0 D4 · Rust Code Duplication 9.3 D17 · Rust Explicit Debt 9.8 X1 · Repo Async correctness 10.0 X21 · Repo Side-effecting pattern guard 10.0 X27 · Repo Collection changed while being enumerated 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X30 · Repo Support guard that admits what it rejects 10.0

The Ugly

X4 · Repo Structured logging 3.3

At a glance — Architecture · 92% · Exemplary ·

The Good

D5 · Rust Coupling 8.0 D6 · Rust Cohesion (LCOM4) 9.5 D22 · Rust Internal API Consistency 9.0 D26 · Rust Project Cohesion 10.0 D35 · Rust Change Coupling 10.0 AX10 · Repo Code composition 8.3 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 AX9 · Repo CQS / query purity 10.0

At a glance — Maturity · 53% · Adequate · gated by M2 ·

The Good

D15 · Rust Churn × Complexity Hotspots 10.0 D21 · Rust Naming Consistency 10.0 M1 · Repo Documentation (README) 7.7 M3 · Repo Folder & project structure 8.0 M4 · Repo Documentation accuracy 7.0

The Ugly

D20 · Rust ADR Quality 0.0 M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 36% · Weak · gated by P1, P3 ·

The Good

D9 · Rust Test Distribution 10.0 D13 · Rust REDACTED Scanning 10.0 D14 · Rust License Compliance 8.0 P10 · Repo Library API & versioning 10.0 P2 · Repo Observability 7.0

The Bad

D12 · Rust Dependency Hygiene 6.5 P4 · Repo Deployment & Rollback 5.0

The Ugly

P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0

At a glance — Security · 76% · Adequate · gated by D30 ·

The Good

D28 · Rust Secrets (history) 8.0 D29 · Rust Static Analysis (SAST) 10.0 D31 · Rust IaC & Container Security 10.0 D43 · Rust Malicious Dependencies 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0

The Ugly

D30 · Rust Dependency Vulnerabilities 0.0

At a glance — Performance · 100% · Exemplary ·

The Good

PF3 · Repo Async & latency hygiene 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP category	Findings	Severity
A03:2025 — Software Supply Chain Failures	45	High / Critical
A07:2025 — Authentication Failures	3	High / Critical

Roadmap

First, establish a CI workflow to automatically build and test every change, and resolve any banned license issues to ensure compliance. Next, document significant design decisions in a dedicated folder to improve architectural clarity and maintainability. Finally, implement a draft release or approval gate to prevent bad builds from reaching users, ensuring a safe and controlled deployment process.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Resolve the 1 No ADRs found finding(s) in ADR Quality.	+7.2 pts	Low	ADR Quality
Resolve the 1 Banned license finding(s) in License Compliance.	+4.6 pts	Low	License Compliance
Add a CI workflow that builds and runs the test suite on every push/PR.	+7.3 pts	Medium	CI/CD gates
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.	+6.5 pts	Medium	Architecture documentation
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.	+2.5 pts	Medium	Deployment & Rollback
Interpolated log message defeats structured logging	+1.7 pts	Medium	Structured logging
Add a build/run (quick start) section to the root README — the first thing a newcomer needs.	+1.3 pts	Medium	Documentation (README)
Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root.	+1.0 pts	Medium	Folder & project structure

File quality

Per-file score 0–10 — a quality signature. Of 16 files carrying findings, judged against the Production bar: 12% slop · 50% mixed · 38% near-clean.

File	Score	Band	Worst signal
REDACTED	0.6	Slop	Dependency Vulnerabilities: High CVE: REDACTED
REDACTED	0.9	Slop	Dependency Vulnerabilities: High CVE: REDACTED
REDACTED	6.3	Mixed	Dependency Vulnerabilities: Medium advisory (unmaintained): REDACTED
crates/concordance-gen-core/src/model/eventcatalog.rs	7.0	Mixed	Code Duplication: Duplicated block (10 lines × 2)
REDACTED	7.2	Mixed	Secrets (history): REDACTED: REDACTED
REDACTED	7.2	Mixed	Secrets (history): REDACTED: REDACTED
capability-provider/src/consumers/event_consumer.rs	7.3	Mixed	Explicit Debt: TodoComment
capability-provider/src/workers/aggregate_command.rs	7.3	Mixed	Explicit Debt: TodoComment
capability-provider/src/wcprovider.rs	7.8	Mixed	Code Duplication: Duplicated block (16 lines × 3)
capability-provider/src/workers/aggregate_event.rs	7.8	Mixed	Code Duplication: Duplicated block (7–9 lines × 2)
crates/concordance-gen-core/src/model/mod.rs	8.2	Near-clean	Explicit Debt: TodoComment
examples/lunar_frontiers/rover-aggregate/src/commands.rs	8.2	Near-clean	Explicit Debt: TodoComment
crates/concordance-gen-macro/src/lib.rs	8.5	Near-clean	Cognitive Complexity: EventCatalogConfig::parse (cognitive 19)
crates/concordance-gen-core/src/generator/aggregate.rs	8.5	Near-clean	Code Duplication: Duplicated block (7–9 lines × 3)
capability-provider/src/workers/notifier.rs	8.5	Near-clean	Code Duplication: Duplicated block (7 lines × 2)
capability-provider/src/consumers/command_consumer.rs	8.5	Near-clean	Code Duplication: Duplicated block (8 lines × 2)

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 10

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 56

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 50

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 23

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 42 of 45 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.9 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 45 dimensions across the health lenses

D1D2D3D4D5D6D9D12D13D14D15D17D20D21D22D26D28D29D30D31D35D43AX10AX3AX4AX9M1M2M3M4P1P10P2P3P4PF3X1X14X15X21X27X28X29X30X4

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 95 of 116 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
Watchdog duplication detector (in-process)	Code duplication	1.0.0	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.400	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.400	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy · checkov	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3 · 3.2.533	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a1609e-0af4-7417-9c19-ee25f6a92ff9.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.rs) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs) and this repository declares a Cargo test suite (capability-provider, 8 test files), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Too few commits for a meaningful bus factor (40 commit(s) sampled, fewer than the 50 this dimension needs before a bus factor means anything).
D19 Documentation Quality — LLM provider failed — The model provider returned an unusable result, so this LLM-assisted dimension fell back to a measurement gap (confidence 0) rather than a penalty. Re-run with a reachable provider to score it.
D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
D34 Knowledge Freshness — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Too few commits to judge knowledge freshness (40 commit(s) sampled).
D44 Platform End-of-Life — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via Dockerfile (examples/bankaccount/eventcatalog/Dockerfile). docker build failed (exit 1) — DEPRECATED: The legacy builder is deprecated and will be removed in a future release. Install the buildx component to build images with BuildKit: https://docs.docker.com/go/bui…; runtime evidence skipped.
GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Java, TypeScript/JavaScript, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X23 Unguarded diagnostic materialisation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart and Ruby source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Erlang, Python, Dart or Ruby was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go and JavaScript/TypeScript source only, and no C# was loaded and no PHP, Java, Kotlin, Python, Ruby, Scala, Dart, Swift, Erlang, Go, JavaScript or TypeScript was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax and MSBuild project configuration, TypeScript source and its tsconfig files, Java source and its package and module declarations, PHP source and its PHPStan and Psalm configuration, Dart source and its pubspec language version, Ruby source and its Sorbet and Steep configuration, Scala source and its build's explicit-nulls, WartRemover and Scalafix settings, and Kotlin source only, and no C# was loaded, no TypeScript was found, and this repository's Rust is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
D13 REDACTED Scanning: REDACTED detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D22 Internal API Consistency: API-surface coherence is an LLM judgement over a sample of the public surface — consistency of intent across the whole API is approximated, not exhaustively verified.
D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".

The LLM boundary

LLM-set scores this run (3): D21, D22, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 function(s) exceeded the cyclomatic complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d1_recommendation.md.

Do you agree with this assessment?

D2 · Cognitive Complexity9.7 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.7 / 10 · rule-coverage 100% · ceiling Prevented

1 function(s) exceeded the cognitive complexity threshold of 15; the worst was EventCatalogConfig::parse at 19.

EventCatalogConfig::parse (cognitive 19)crates/concordance-gen-macro/src/lib.rs:75

What to do

Bring the 1 body over 15 down to 15 or less in Cognitive Complexity — start with EventCatalogConfig::parse (cognitive 19). — Refactoring it lifts Cognitive Complexity from 9.7 to about 10.0/10.
Stand up a CI pipeline, then gate Cognitive Complexity in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 over-large unit(s) detected — types, modules or files that carry too much.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

Do you agree with this assessment?

D4 · Code Duplication9.3 / 10Stronggated by 8 serious findings✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Verified

8 duplicated block group(s) detected.

Duplicated block (16 lines × 3)capability-provider/src/wcprovider.rs:74

Duplicated block (10 lines × 2)crates/concordance-gen-core/src/model/eventcatalog.rs:66

Duplicated block (7–9 lines × 3)crates/concordance-gen-core/src/generator/aggregate.rs:63

Duplicated block (7–9 lines × 2)capability-provider/src/workers/aggregate_event.rs:58

Duplicated block (7 lines × 2)capability-provider/src/workers/notifier.rs:23

+ 3 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 1 Duplicated block (16 lines × 3) finding(s) in Code Duplication — start with wcprovider.rs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Duplicated block (10 lines × 2) finding(s) in Code Duplication — start with eventcatalog.rs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Duplicated block (7–9 lines × 3) finding(s) in Code Duplication — start with aggregate.rs. — One of this dimension's main actionable groups (1 warning-level).
Stand up a CI pipeline, then gate Code Duplication in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D5 · Coupling8.0 / 10Strong✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 8.0 / 10 · rule-coverage 100% · ceiling Prevented

4 production modules (Cargo), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 1 module(s) off the main sequence, with abstractness counted on 2 of the 4 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).

Off the main sequence: concordance-gen-core

What to do

Resolve the 1 Off the main sequence finding(s) in Coupling. — One of this dimension's main actionable groups (1 warning-level).
Stand up a CI pipeline, then gate Coupling in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d5_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D6 · Cohesion (LCOM4)9.5 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Verified

1 of 23 classes have LCOM4 above 3.

Low cohesion: EventCatalogSite (LCOM4 5)crates/concordance-gen-core/src/model/eventcatalog.rs:18

What to do

Resolve the 1 Low cohesion finding(s) in Cohesion (LCOM4) — start with eventcatalog.rs. — One of this dimension's main actionable groups (1 warning-level).
Stand up a CI pipeline, then gate Cohesion (LCOM4) in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d6_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D9 · Test Distribution10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

22 test methods: 22 unit, 0 integration, 0 BDD, 0 e2e. The Rust suite contributes 22 `#[test]` function(s) across 8 file(s) declaring at least one; its unit/integration split is Cargo's own — 0 of those file(s) are integration-test targets under a crate's tests/ directory, and the rest are #[test] functions compiled into the crate they test.

✓ On the Gold path — maintain.

Detailed fixes: d9_recommendation.md.

Do you agree with this assessment?

D12 · Dependency Hygiene~~9.4~~ 6.5 / 10Adequate✓ Tool-verified

What it measures: Whether dependencies are current, secure, and not bloated.

Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (saturating for vulnerabilities, capped-linear for deprecation/outdated) per KLoC. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 6.5 / 10 · rule-coverage 69% · ceiling Verified

12 outdated, 0 yanked direct Cargo dependencies. 20 of 29 direct crates were graded against crates.io (0 not published there, 9 not resolved by a committed REDACTED). Only DIRECT edges are graded: a transitive crate cannot be moved past what its parent's requirement admits, so reporting one would be advice its owner cannot take. A newer release is reported only where this repository's OWN requirement already admits it, so the remedy is `cargo update` and never a manifest edit — which means a release outside the declared range is deliberately NOT charged, because a written-down constraint is a decision rather than a defect. Note that a bare requirement is a CARET, and for a 0.x crate its ceiling is the minor. Whether any crate is UNMAINTAINED is not graded — crates.io publishes no maintenance status, and release age does not stand in for one. Known CVEs in this dependency graph are D30's question, read from REDACTED there.

Outdated: anyhow · ×12

What to do

Stand up a CI pipeline, then gate Dependency Hygiene in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D13 · REDACTED Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

REDACTED scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D14 · License Compliance8.0 / 10Adequategated by 1 critical finding✓ Tool-verified

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 8.0 / 10 · rule-coverage 100% · ceiling Verified

1 of 321 shipped crate(s) use a banned license. Licences were resolved from crates.io over the crates a consumer compiles — this repository's REDACTED closed over its manifests' `[dependencies]` and `[build-dependencies]`. Crates it asks for ONLY under `[dev-dependencies]` are excluded: they are not compiled by anything that depends on this repository.

Banned license: downloader

What to do

Resolve the 1 Banned license finding(s) in License Compliance. — One of this dimension's main actionable groups (1 issue-level).
Stand up a CI pipeline, then gate License Compliance in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d14_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

Do you agree with this assessment?

D17 · Explicit Debt9.8 / 10Stronggated by 6 serious findings✓ Tool-verified

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Prevented

6 deducted task-comment markers across 3636 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

TodoComment · ×6capability-provider/src/consumers/event_consumer.rs:55

What to do

Resolve the 6 TodoComment finding(s) in Explicit Debt — start with event_consumer.rs (2), aggregate_command.rs (2), mod.rs. — One of this dimension's main actionable groups (6 warning-level).
Stand up a CI pipeline, then gate Explicit Debt in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D22 · Internal API ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether the internal API surface is consistent and coherent.

Method: Judged by language model at low temperature over a sample of the public API surface (IsPackable or .Contracts types). Sampled, advisory; confidence discounted by model uncertainty.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 API inconsistencies across 32 exposed types.

✓ On the Gold path — maintain.

Detailed fixes: d22_recommendation.md.

Do you agree with this assessment?

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 4 build units (Cargo) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)8.0 / 10Adequategated by 2 critical findings✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: REDACTED scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 8.0 / 10 · rule-coverage 100% · ceiling Documented

2 finding(s): 0 critical, 2 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

REDACTED

What to do

Resolve the 2 REDACTED finding(s) in Secrets (history) — start with REDACTED, REDACTED. — One of this dimension's main actionable groups (2 issue-level).
Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)10.0 / 10Exemplary○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

semgrep found no security issues.

✓ On the Gold path — maintain.

Detailed fixes: d29_recommendation.md.

Do you agree with this assessment?

D30 · Dependency Vulnerabilities0.0 / 10Critical✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

45 finding(s): 0 critical, 7 high, 38 medium, 0 low.

REDACTED

+ 1 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 15 Medium CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (15). — One of this dimension's main actionable groups (15 warning-level).
Resolve the 6 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (6). — One of this dimension's main actionable groups (6 issue-level).
Resolve the 1 High vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D31 · IaC & Container Security10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether Dockerfiles / Terraform / Kubernetes config follow security best practices.

Method: IaC/container misconfiguration scan via trivy config (Dockerfile/Terraform/K8s/Helm/CloudFormation); severity rules to 0-10 moderate normalizer. NotApplicable without manifests. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

trivy and checkov found no infrastructure-as-code or container misconfigurations.

✓ On the Gold path — maintain.

Detailed fixes: d31_recommendation.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX10 · Code composition8.3 / 10Strong✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.

Do you agree with this assessment?

AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

Do you agree with this assessment?

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

Do you agree with this assessment?

AX9 · CQS / query purity10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether read (query) handlers stay side-effect-free — a query that writes persistent state or raises events breaks CQS and makes reads unsafe to retry, cache, or route to a read replica.

Method: Roslyn scan: CQRS handlers classified query-vs-command by interface (IQueryHandler/ICommandHandler/IRequestHandler<TQuery,TResult>) and name convention (*Query/Get*/Find* vs *Command); each query handler's body checked for persistent-state writes (SaveChanges/repository Add-Update) or event publishes by resolved invocation. Deterministic, type-level, exhaustive over the detected handlers.

Coverage: Population: CQRS handlers identified by IQueryHandler/ICommandHandler/IRequestHandler interface + *Query/Get*/Find*/*Command NAME convention; query purity then checked exhaustively within that set — a query handler using neither convention is invisible, and mutation is a resolved persistence/publish CALL, not full dataflow.

Do you agree with this assessment?

M1 · Documentation (README)7.7 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
Add a README to the 2 of 12 project(s) that lack one — worth up to 0.3 pts.

Do you agree with this assessment?

M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.

What to do

Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.

Do you agree with this assessment?

M3 · Folder & project structure8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Production code isn't grouped under a src/ folder — it's spread across several top-level directories, so there's no one place that says 'this is the product'.

What to do

Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root.

Do you agree with this assessment?

M4 · Documentation accuracy7.0 / 10Strong◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

Do you agree with this assessment?

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

Add a CI workflow that builds and runs the test suite on every push/PR.

Do you agree with this assessment?

P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.

Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.

Do you agree with this assessment?

P2 · Observability7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

Do you agree with this assessment?

P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

No static application security testing detected. For this repository's stack, add cargo-audit / cargo-deny (or clippy) (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

What to do

Run what this repository's stack ships: cargo-audit / cargo-deny (or clippy) — or `semgrep --config=auto`, which runs on any language — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

What to do

Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.

Do you agree with this assessment?

PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

Do you agree with this assessment?

X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

Do you agree with this assessment?

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X27 · Collection changed while being enumerated10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `for` loop leaves the `RefCell` it is walking alone — safe Rust rejects a body that changes the collection its loop borrows at compile time, except through interior mutability: a `RefCell` borrowed in the loop's header stays borrowed until the loop ends, so a `borrow_mut()` of it inside the body panics with `already borrowed: BorrowMutError` and the remaining elements are never seen.

Method: Roslyn syntax + semantics: `foreach` statements whose body calls a structural mutator (`Add`/`Remove`/`Clear`/`Insert`/…) on the very expression the loop is enumerating. Two arms. ARM A — the source is a concrete fragile BCL collection, or a live `Keys`/`Values` view over one, and the mutator resolves to that same collection's own member; concurrent and immutable collections and arrays are outside the population by construction, since their enumerators survive a structural change. ARM B — the source is an argument-less accessor CALL on a receiver whose body is in source: the accessor must return a stored field VERBATIM and a sibling member must structurally change that same field, both read off the implementations rather than from the members' names. A mutation the loop provably exits immediately after (`break`/`return`/`throw`/`goto`), or one written inside a nested loop or a lambda, is counted and never reported. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

Do you agree with this assessment?

X4 · Structured logging3.3 / 10Weak✓ Tool-verified

Other · Code Health — Whether log calls use message templates (queryable) rather than interpolated strings.

Method: Roslyn syntax scan: every log call-site counted; interpolated-string first-argument violations flagged. Population is all log calls, not estimated. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `trace`/`debug`/`info`/`warn`/`error`/`fatal`/`verbose`/`silly`/`http`/`log` call on a receiver named for a logger, in a package whose own or an enclosing `package.json` declares a logger that carries values as fields (pino, pino-http, nestjs-pino, Fastify, winston, bunyan, tslog, LogTape, roarr), whose first deciding argument is a template literal with substitutions; an object-literal fields argument is stepped over, a plain string message clears the call. Python is read the same way: a `debug`/`info`/`warning`/`error`/`exception`/`critical`/`log` call on a logger in a file that imports the standard library’s `logging` or structlog (loguru, which formats at the call, is not judged), whose message is a whole f-string with a non-constant field; a `%`-formatted, `.format()`-ed or concatenated message is not convicted, as in C#. PHP is read the same way: a PSR-3 level call (`emergency`…`debug`, `log`) on a logger (`$logger`, `$this->logger`, Laravel’s `Log::`, `logger()`, `\Drupal::logger()`) in a package whose `composer.json` requires a PSR-3 logger or a framework that hands one out (psr/log, Monolog, Laravel, Symfony, Drupal, CakePHP), or a file that imports one, whose message is a double-quoted string interpolating a variable; a single-quoted message clears the call, and `sprintf` or `.` concatenation is not convicted, as in C#. Dart is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on Sentry’s structured logger (`Sentry.logger`) whose message is a whole string literal interpolating a value (`$name`, `${…}`); the `Sentry.logger.fmt` template API clears the call. Dart that logs only through loggers with one message and no fields (package:logging, package:logger, talker, dart:developer) is not applicable rather than a reach gap. Ruby is read the same way: a `trace`/`debug`/`info`/`warn`/`error`/`fatal` call on the console gem’s `Console` (declared by a Gemfile, gemspec or Gemfile.lock, or required) or, where SemanticLogger, Ougai or dry-logger is declared or required, on a receiver named for a logger (`logger`, `@logger`, `Rails.logger`, `log`), whose first deciding argument is, as the whole argument, a double-quoted string interpolating a non-constant value (`#{…}`, `#@ivar`); a plain literal clears the call, keyword arguments are the fields, and a block, `%`-format or `+` concatenation is not convicted. Ruby that logs only through the standard Logger (Rails.logger) is not applicable rather than a reach gap. Deterministic.

`warn!` at line 60 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:60
`error!` at line 82 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:82
`error!` at line 105 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:105
`error!` at line 132 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:132
`error!` at line 158 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:158
`error!` at line 184 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/wcprovider.rs:184
`error!` at line 91 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/state.rs:91
`error!` at line 432 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/config.rs:432
`info!` at line 20 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/bin/concordance.rs:20
`info!` at line 23 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/bin/concordance.rs:23
`warn!` at line 82 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:82
`trace!` at line 88 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:88
`trace!` at line 93 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:93
`trace!` at line 158 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. (×2) — capability-provider/src/workers/process_manager.rs:158, capability-provider/src/workers/aggregate_event.rs:158
`error!` at line 161 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:161
`trace!` at line 173 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:173
`error!` at line 176 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/process_manager.rs:176
`trace!` at line 54 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/general_event.rs:54
`error!` at line 70 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/general_event.rs:70
`trace!` at line 53 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:53
`warn!` at line 74 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:74
`trace!` at line 85 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:85
`error!` at line 122 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:122
`error!` at line 134 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:134
`error!` at line 162 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:162
`trace!` at line 187 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:187
`error!` at line 191 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_event.rs:191
`trace!` at line 60 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_command.rs:60
`trace!` at line 78 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_command.rs:78
`trace!` at line 94 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_command.rs:94
`error!` at line 109 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`. — capability-provider/src/workers/aggregate_command.rs:109

What to do

Interpolated log message defeats structured logging

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	74%	Adequate — gated by X4	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture	92%	Exemplary	Solid.
Maturity	53%	Adequate — gated by M2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	36%	Weak — gated by P1, P3	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	76%	Adequate — gated by D30	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Performance	100%	Exemplary	Strongest area.

Not evidenced — 2 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo

Not included — 74 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC2 Forms & labels — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC3 Page structure — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC4 Keyboard semantics — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC5 ARIA correctness — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC6 Visual & motion safety — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AC7 A11y enforcement — Frontend below the scale floor (4 DOM element(s) < 25) — too little surface to assess accessibility.
AX1 Captive dependencies — Not applicable: Rust with no dependency-injection crate has no container to hand one lifetime's instance to another — every value is owned by the code that builds it, and the borrow checker rejects a longer-lived value keeping a borrow of a shorter-lived one.
AX2 Stateful singletons — Not applicable: Rust's compiler refuses unsynchronised shared mutation — a value shared across threads must be Sync — so the race this check looks for cannot be written.
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — no test/production split to check
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
AXR1 Runtime accessibility — docker build failed (exit 1) — DEPRECATED: The legacy builder is deprecated and will be removed in a future release. Install the buildx component to build images with BuildKit: https://docs.docker.com/go/bui…; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no data at rest for these controls to protect.
C2 Access Controls — No access-control surface detected in the analyzed source — this repository starts no server another machine can reach (no actix-web HttpServer, axum::serve, Rocket launch, warp::serve, poem or salvo Server, tonic Server::builder, hyper or tiny_http server outside examples and tests, none bound beyond loopback). Access control is therefore N/A here — a crate is authorized by the application that serves it, not by itself. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound.
C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, first_name, date_of_birth, phone, …) or stored credential in a Diesel schema, a SeaORM entity, a Diesel or sqlx row struct, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store crate (sqlx, Diesel, SeaORM, rusqlite, tokio-postgres, MongoDB, …) in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over.
D10 Test Quality — ~1257 lines of test source are present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included — the .rs suite was found but not re-run
D16 Bus Factor — too few commits for a meaningful bus factor
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D19 Documentation Quality — LLM evaluation failed
D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.rs), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
D34 Knowledge Freshness — too few commits to judge knowledge freshness
D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and a call made through an inferred or generic receiver has no resolvable owner in the source. Reported as guidance rather than measured
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — no CI workflow found
P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Rust source, so there is no service whose uptime a failing dependency could take down
P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `#[bench]`, criterion's `bench_function`/`bench_with_input`, `#[divan::bench]` or `#[library_benchmark]` in any `.rs` file, or criterion, divan, iai or a `[[bench]]` target in a Cargo.toml, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
PF2 Allocation hygiene — Not applicable: Rust spells out every heap allocation and makes borrowed slices (&[T], &str) its ordinary parameter types, so the allocation-aware style this card rewards elsewhere is the language's baseline rather than a rung to climb.
S1 Web-Security Posture — No web surface: 30 Rust file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. This repository serves no HTTP of its own — no HTTP-server crate (actix-web, axum, Rocket, warp, poem, tide, salvo, tonic, a hyper server, …) among its Cargo manifests' run-time dependencies, and no server started in its production source — so HTTPS enforcement, HSTS, cookie flags and input validation are N/A here, as they are for a C# library or worker. If this codebase starts serving HTTP, the dimension reactivates automatically.
SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X12 Unreachable branch — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X13 Undrained process stream — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X17 Uncapped recursion over a caller-supplied document — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X19 Unrestored process-global state — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — no C# was loaded; this repository's Rust was read, and no request in it can be cancelled by a caller — a Rust request takes no token: a future is cancelled by dropping it, from outside the call (select!, a timeout, an aborted task), and reqwest, hyper and tonic take none
X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X22 Contradicted release guard — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X23 Unguarded diagnostic materialisation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X25 Inert configuration knob — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. Rust's compiler refuses the unsynchronised version: a collection shared between a callback's thread and the waiting body must be `Sync`, which a `Vec`, `VecDeque` or `HashMap` is only behind a `Mutex`/`RwLock`, so the race this check looks for cannot be written in safe Rust. Not a gap in the analyzer and not a finding about your code.
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 10 finding(s)

D30 · Dependency Vulnerabilities · High CVE · ×6

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

D28 · Secrets (history) · REDACTED · ×2

REDACTED
REDACTED

D14 · License Compliance · Banned license · ×1

Banned license: downloader — `downloader` 0.2.7 is published on crates.io under `LGPL-3.0-or-later`, which this policy bans, and it is in the SHIPPED closure of this repository's REDACTED — so it is compiled by everything that builds this repository, not just by its test harness. The expression was read as SPDX, not as text: an `OR` is a choice and is only charged when every branch is banned, while an `AND` binds you to both operands and is charged when either is. Replace the crate, or record an accepted exception.

D30 · Dependency Vulnerabilities · High vulnerability · ×1

REDACTED

Serious — 56 finding(s)

D30 · Dependency Vulnerabilities · Medium CVE · ×15

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

D30 · Dependency Vulnerabilities · Medium advisory (unmaintained) · ×11

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

D30 · Dependency Vulnerabilities · Medium advisory (unsound) · ×8

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

D17 · Explicit Debt · TodoComment · ×6

TodoComment capability-provider/src/consumers/event_consumer.rs:55 — // TODO: when NATS server and async nats client support it, convert this — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment capability-provider/src/consumers/event_consumer.rs:188 — //TODO — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment capability-provider/src/workers/aggregate_command.rs:15 — // TODO: add an AggregateEventWorker — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment capability-provider/src/workers/aggregate_command.rs:101 — // TODO: check for lease expiration (skip outbound pub if callee timeout would have already expired) - thanks Victor — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment crates/concordance-gen-core/src/model/mod.rs:154 — // TODO — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
TodoComment examples/lunar_frontiers/rover-aggregate/src/commands.rs:26 — // TODO: enforce that new position is a valid destination — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.

D30 · Dependency Vulnerabilities · Medium vulnerability · ×4

REDACTED
REDACTED
REDACTED
REDACTED

D2 · Cognitive Complexity · EventCatalogConfig · ×1

EventCatalogConfig::parse (cognitive 19) crates/concordance-gen-macro/src/lib.rs:75 — EventCatalogConfig::parse has cognitive complexity 19 (threshold 15). Drivers by points: if/else 5 (14 pts), match/switch 1 (3 pts), loops 1 (2 pts) (nesting depth added 12). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D4 · Code Duplication · Duplicated block (16 lines × 3) · ×1

Duplicated block (16 lines × 3) capability-provider/src/wcprovider.rs:74 — capability-provider/src/wcprovider.rs:74-89 | capability-provider/src/wcprovider.rs:97-112 | capability-provider/src/wcprovider.rs:150-165 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

D4 · Code Duplication · Duplicated block (10 lines × 2) · ×1

Duplicated block (10 lines × 2) crates/concordance-gen-core/src/model/eventcatalog.rs:66 — crates/concordance-gen-core/src/model/eventcatalog.rs:66-75 | crates/concordance-gen-core/src/model/eventcatalog.rs:77-86 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (7–9 lines × 3) · ×1

Duplicated block (7–9 lines × 3) crates/concordance-gen-core/src/generator/aggregate.rs:63 — crates/concordance-gen-core/src/generator/aggregate.rs:63-71 | crates/concordance-gen-core/src/generator/genhandler.rs:41-47 | crates/concordance-gen-core/src/generator/procmgr.rs:44-50 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from all 3 call sites, so a change lands once.

D4 · Code Duplication · Duplicated block (7–9 lines × 2) · ×1

Duplicated block (7–9 lines × 2) capability-provider/src/workers/aggregate_event.rs:58 — capability-provider/src/workers/aggregate_event.rs:58-64 | capability-provider/src/workers/process_manager.rs:57-65 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.

D4 · Code Duplication · Duplicated block (7 lines × 2) · ×1

Duplicated block (7 lines × 2) capability-provider/src/workers/notifier.rs:23 — capability-provider/src/workers/notifier.rs:23-29 | capability-provider/src/workers/projector.rs:23-29 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.

D4 · Code Duplication · Duplicated block (16 lines × 4) · ×1

Duplicated block (16 lines × 4) capability-provider/src/wcprovider.rs:74 — capability-provider/src/wcprovider.rs:74-89 | capability-provider/src/wcprovider.rs:97-112 | capability-provider/src/wcprovider.rs:124-139 | capability-provider/src/wcprovider.rs:150-165 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.

D4 · Code Duplication · Duplicated block (9 lines × 2) · ×1

Duplicated block (9 lines × 2) capability-provider/src/workers/aggregate_event.rs:52 — capability-provider/src/workers/aggregate_event.rs:52-60 | capability-provider/src/workers/general_event.rs:53-61 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.

D4 · Code Duplication · Duplicated block (8 lines × 2) · ×1

Duplicated block (8 lines × 2) capability-provider/src/consumers/command_consumer.rs:55 — capability-provider/src/consumers/command_consumer.rs:55-62 | capability-provider/src/consumers/event_consumer.rs:43-50 — the copies sit in sibling files of one directory, so a shared home is within easy reach: extract the block into a single shared function the call sites can all reach — a file they already depend on, or a new one alongside them — and call it from both call sites, so a change lands once.

D5 · Coupling · Off the main sequence · ×1

Off the main sequence: concordance-gen-core — concordance-gen-core: abstractness 0.00, instability 0.00, distance 1.00 — zone of pain — concrete and depended on by 1 project(s), so it's rigid to change.

D6 · Cohesion (LCOM4) · Low cohesion · ×1

Low cohesion: EventCatalogSite (LCOM4 5) crates/concordance-gen-core/src/model/eventcatalog.rs:18 — EventCatalogSite's methods fall into 5 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 5 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.

P1 · CI/CD gates · No CI pipeline · ×1

No CI pipeline — No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

Minor — 38 finding(s)

X4 · Structured logging · Interpolated log message defeats structured logging · ×32

Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:60 — `warn!` at line 60 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:82 — `error!` at line 82 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:105 — `error!` at line 105 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:132 — `error!` at line 132 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:158 — `error!` at line 158 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/wcprovider.rs:184 — `error!` at line 184 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/state.rs:91 — `error!` at line 91 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/config.rs:432 — `error!` at line 432 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/bin/concordance.rs:20 — `info!` at line 20 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/bin/concordance.rs:23 — `info!` at line 23 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `info!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:82 — `warn!` at line 82 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:88 — `trace!` at line 88 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:93 — `trace!` at line 93 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:158 — `trace!` at line 158 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:161 — `error!` at line 161 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:173 — `trace!` at line 173 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/process_manager.rs:176 — `error!` at line 176 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/general_event.rs:54 — `trace!` at line 54 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/general_event.rs:70 — `error!` at line 70 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:53 — `trace!` at line 53 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:74 — `warn!` at line 74 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `warn!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:85 — `trace!` at line 85 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:122 — `error!` at line 122 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:134 — `error!` at line 134 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `error!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
Interpolated log message defeats structured logging capability-provider/src/workers/aggregate_event.rs:158 — `trace!` at line 158 is handed a format string with `{…}` values in it, so tracing records one finished `message` field — the values in it cannot be queried, filtered or aggregated as fields, and every occurrence reads as a different message. Record the values as fields beside a constant message instead: `trace!(order_id = %order_id, status = ?status, "order status updated")` (`%` records a value by its `Display`, `?` by its `Debug`, a bare name as itself), which a JSON subscriber, OpenTelemetry or a log store keeps as queryable keys. An error goes in as a field too: `error = %err`.
+ 7 more in this group — see findings.md.

D20 · ADR Quality · No ADRs found · ×1

No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.

D28 · Secrets (history) · Rotate the exposed credentials · ×1

REDACTED

M2 · Architecture documentation · No ADRs · ×1

No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

M2 · Architecture documentation · No architecture diagram/doc · ×1

No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.

M3 · Folder & project structure · No src/ separation · ×1

No src/ separation — Production code isn't grouped under a src/ folder — it's spread across several top-level directories, so there's no one place that says 'this is the product'.

P3 · Security & performance tooling · No SAST · ×1

No SAST — No static application security testing detected. For this repository's stack, add cargo-audit / cargo-deny (or clippy) (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

Minor — 12 finding(s)

D12 · Dependency Hygiene · Outdated · ×12

Outdated: anyhow — `anyhow` is locked at 1.0.69 but 1.0.104 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p anyhow` and commit the updated REDACTED.
Outdated: async-trait — `async-trait` is locked at 0.1.66 but 0.1.92 is the current stable release on crates.io, and it already satisfies the `"0.1"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p async-trait` and commit the updated REDACTED.
Outdated: chrono — `chrono` is locked at 0.4.23 but 0.4.45 is the current stable release on crates.io, and it already satisfies the `"0.4.23"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p chrono` and commit the updated REDACTED.
Outdated: futures — `futures` is locked at 0.3.26 but 0.3.34 is the current stable release on crates.io, and it already satisfies the `"0.3"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p futures` and commit the updated REDACTED.
Outdated: proc-macro2 — `proc-macro2` is locked at 1.0.51 but 1.0.107 is the current stable release on crates.io, and it already satisfies the `"1.0"` requirement declared in crates/concordance-gen-macro/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p proc-macro2` and commit the updated REDACTED.
Outdated: serde — `serde` is locked at 1.0.152 but 1.0.229 is the current stable release on crates.io, and it already satisfies the `"1.0"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde` and commit the updated REDACTED.
Outdated: serde_bytes — `serde_bytes` is locked at 0.11.9 but 0.11.19 is the current stable release on crates.io, and it already satisfies the `"0.11"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_bytes` and commit the updated REDACTED.
Outdated: serde_json — `serde_json` is locked at 1.0.94 but 1.0.154 is the current stable release on crates.io, and it already satisfies the `"1.0"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p serde_json` and commit the updated REDACTED.
Outdated: tokio — `tokio` is locked at 1.26.0 but 1.54.1 is the current stable release on crates.io, and it already satisfies the `"1"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tokio` and commit the updated REDACTED.
Outdated: tracing — `tracing` is locked at 0.1.37 but 0.1.44 is the current stable release on crates.io, and it already satisfies the `"0.1"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tracing` and commit the updated REDACTED.
Outdated: tracing-subscriber — `tracing-subscriber` is locked at 0.3.16 but 0.3.23 is the current stable release on crates.io, and it already satisfies the `"0.3"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p tracing-subscriber` and commit the updated REDACTED.
Outdated: uuid — `uuid` is locked at 1.3.0 but 1.28.0 is the current stable release on crates.io, and it already satisfies the `"1.3.0"` requirement declared in capability-provider/Cargo.toml — so the lockfile is behind this repository's own declared range. Run `cargo update -p uuid` and commit the updated REDACTED.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Findings	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-182c72cde27e4149af699db78da88100/history.json --exit-code 0 --source .	2	artifacts/raw/gitleaks-history.json
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-182c72cde27e4149af699db78da88100/tree.json --exit-code 0 --source .	0	artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .	0	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	trivy	—	trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs /bin/ --skip-dirs /obj/ . --skip-db-update	45	artifacts/raw/trivy-fs.json
D31 · IaC & Container Security	trivy	—	trivy config --format json --quiet .	0	artifacts/raw/trivy-config.json
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.	0	—
D36 · Supply-chain Provenance & Signing	provenance	—	provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.	0	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	0	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	0	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	0	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	0	—
D43 · Malicious Dependencies	trivy	—	trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs /bin/ --skip-dirs /obj/ . --skip-db-update	0	artifacts/raw/trivy-fs.json

Run 01a1609e-0af4-7417-9c19-ee25f6a92ff9 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Findings by how serious they are

This survey was produced by

Executive summary

Top priorities

Diagnosis: what the measurements show together

Architecture — module dependency graph

Architecture: which parts of the code depend on which

At a glance — Code Health · 74% · Adequate · gated by X4 ·

At a glance — Architecture · 92% · Exemplary ·

At a glance — Maturity · 53% · Adequate · gated by M2 ·

At a glance — Readiness · 36% · Weak · gated by P1, P3 ·

At a glance — Security · 76% · Adequate · gated by D30 ·

At a glance — Performance · 100% · Exemplary ·

Security & Compliance — OWASP Top-10 mapping

Roadmap

File quality

How the grades work

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts