edomata — Watchdog Audit

Executive summary

Read through the Production lens — the standard calibration. *Green* means good enough to run in production. The score is absolute and comparable across repos.

hnaderi/edomata is sound in substance but carries real gaps (53%). It is not in crisis, but the issues below raise the cost of changing it — friction its consumers ultimately inherit.

It is strongest in Code Health (100%) — the code is clean and low-risk to change. Architecture (100%) is solid too.

The area that most needs attention is Maturity (42%) — onboarding is slow — key decisions and the architecture aren't written down, so contributors have to reverse-engineer the intent. Security (42%) is the next concern — exposure to security and compliance incidents is elevated.

Leadership focus, highest impact first: Record significant decisions one document per decision (Architecture documentation); Reconcile the README with reality (Documentation accuracy); 'Testing' section to the root README (Documentation (README)).

For scale: Small (~6,717 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

It builds on a genuinely strong Code Health foundation (100%); the priorities above are the highest-leverage way to bring the rest up to that level.

Code Health 100% ★ Exemplary Architecture 100% ★ Exemplary Maturity 42% Weak · gated by M2, M4 Readiness 61% Adequate · gated by P3 Security 42% Weak · gated by D29, D36 Domain Modelling 100% ★ Exemplary

How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.

Maturity 42% · 46% weightSecurity 42% · 25% weightReadiness 61% · 14% weightCode Health 100% · 8% weightArchitecture 100% · 4% weightDomain Modelling 100% · 2% weight

Raise Maturity 42 → 70 (the Healthy floor) ⇒ headline 53 → ~59.

Code composition — where the lines go

Tests 100%

New since the last scan (1+)

1 finding(s) are new versus the previous scan (2026-07-30) — surfaced by this scheduled scan itself, no pull request required.

D29 · High: github-actions-mutable-action-tag .github/workflows/ci.yml

A full-fidelity diff against the previous run's complete recorded findings — line-move tolerant: a finding that only shifted line counts as unchanged, only genuinely new titles/files surface here.

Rebuild cost & value ~ Modeled — €3,700–€18,000

Cost to rebuild	€3,700–€18,000 (0.1 person-years (61–194 h), ~1 engineer)
Domain complexity	Standard — harder problems cost more per line
Quality factor	0.7× (at 53% quality) — the last 20% of quality is most of the work
Size & shape	Small · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)

This codebase represents roughly ~0.1 person-years of build effort (about ~€11,000 to rebuild). Its weakest lens is Maturity at 42% — the part of that asset most exposed by the findings below.

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.2) — domain model × a 0.7× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

+10.5 pts · Medium effort · Architecture documentation

Reconcile the README with reality: README claims edomata is an event-driven automata for Scala/Scala.js/native but the evidence reveals no such module.

+10.5 pts · Medium effort · Documentation accuracy

Add a 'Testing' section to the root README — how to run the test suite.

+6.9 pts · Medium effort · Documentation (README)

Diagnosis — what's actually going on

Value concentrated against a weak lens · High · Value at risk

This is a Small asset (~0.1 person-years to rebuild), and its weakest lens is Maturity at 42%. The operational and business risk on an asset this size concentrates there — that's where remediation buys the most protection.

Evidence: valuation: Small, ~0.1 person-years rebuild (6,717 LoC) · weakest lens: Maturity 42%

→ Direct remediation budget at Maturity first — highest risk-reduction per euro on an asset this size.

Highest-leverage move · Medium · Leverage

Of everything flagged, the best return on effort is: Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form). The rest can wait behind it.

Evidence: priority ranking: top of 5 ranked by impact/effort

→ Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

Architecture — module dependency matrix

27 modules, 61 dependencies — 1 dependency cycle, shown as the red cell(s) above the diagonal. Rows and columns are the same modules, ordered so that a module only depends on ones above it. A cell means the row depends on the column, and its number is how many type pairs create that dependency. Read one thing: is anything above the diagonal? A mark there is a dependency cycle. (A cycle is all this shows — an unusual but cycle-free dependency sits below the diagonal like any other.)

At a glance — Code Health · 100% · Exemplary

The Good

D3 · Scala God Classes 10.0 D4 · Scala Code Duplication 10.0

At a glance — Architecture · 100% · Exemplary

The Good

D35 · Scala Change Coupling 10.0

At a glance — Maturity · 42% · Weak · gated by M2, M4

The Good

D16 · Scala Bus Factor 9.7 D21 · Scala Naming Consistency 10.0 M3 · Repo Folder & project structure 8.0

The Bad

M1 · Repo Documentation (README) 6.7

The Ugly

M2 · Repo Architecture documentation 2.0 M4 · Repo Documentation accuracy 1.0

At a glance — Readiness · 61% · Adequate · gated by P3

The Good

D13 · Scala Secret Scanning 10.0 P1 · Repo CI/CD gates 10.0

The Bad

P4 · Repo Deployment & Rollback 5.0

The Ugly

P3 · Repo Security & performance tooling 3.0

At a glance — Security · 42% · Weak · gated by D29, D36

The Good

D28 · Scala Secrets (history) 10.0

The Ugly

D29 · Scala Static Analysis (SAST) 0.2 D36 · Scala Supply-chain Provenance & Signing 2.5

At a glance — Domain Modelling · 100% · Exemplary

The Good

DM5 · Repo Encapsulated state 10.0 DM6 · Repo Domain ↔ infrastructure boundary 10.0 DM8 · Repo Value-object opportunities 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP category	Findings	Severity
A03:2021 — Injection	23	High / Critical

Roadmap

Begin by documenting significant architectural decisions in a dedicated, discoverable location to capture context and consequences. Simultaneously, reconcile the README with reality by correcting the project description and adding a testing section to explain how to run the test suite. Next, resolve the 23 high-severity static analysis findings, starting with the CI configuration files. Finally, integrate the static analyzer into the CI pipeline as a required step to prevent regressions, ensuring the build fails on new issues rather than relying on local execution.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).	+10.5 pts	Medium	Architecture documentation
Reconcile the README with reality: README claims edomata is an event-driven automata for Scala/Scala.js/native but the evidence reveals no such module.	+10.5 pts	Medium	Documentation accuracy
Add a 'Testing' section to the root README — how to run the test suite.	+6.9 pts	Medium	Documentation (README)
Resolve the 23 High finding(s) in Static Analysis (SAST) — start with ci.yml (22), greetings.yml.	+6.7 pts	Medium	Static Analysis (SAST)
Your ecosystem's static analyzer is declared as a dependency but is not wired into CI — run it as a required step on push/PR (e.g. `composer phpstan` / `mix sobelow` / `bundle exec brakeman` / the spotbugs Gradle task / `sbt scalafixAll --check` / `golangci-lint run` / `rebar3 lint`) so a regression fails the build instead of relying on someone running it locally.	+5.5 pts	Medium	Security & performance tooling
Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.	+5.5 pts	Medium	Deployment & Rollback
Group tests in the folder your build system expects (tests/, test/, spec/, or your module's test source set) so the test surface is discoverable and CI can scope it.	+5.1 pts	Medium	Folder & project structure
Resolve the 1 No build provenance finding(s) in Supply-chain Provenance & Signing.	+1.6 pts	Low	Supply-chain Provenance & Signing

File quality

Per-file score 0–10 — a quality signature. Of 2 files carrying findings, judged against the Production bar: 0% slop · 100% mixed · 0% near-clean.

File	Score	Band	Worst signal
.github/workflows/ci.yml	4.4	Mixed	Static Analysis (SAST): High: gha-workflow-env-secret
.github/workflows/greetings.yml	7.2	Mixed	Static Analysis (SAST): High: github-actions-mutable-action-tag

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 18 of 19 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 1 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.3 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 19 dimensions across the health lenses

D3D4D13D16D21D28D29D35D36DM5DM6DM8M1M2M3M4P1P3P4

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 23 of 35 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
jscpd	Code duplication	—	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.302	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.302	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019fca5f-924d-7277-b1b4-c82e5e073601.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D19 Documentation Quality — LLM provider failed — The model provider returned an unusable result, so this LLM-assisted dimension fell back to a measurement gap (confidence 0) rather than a penalty. Re-run with a reachable provider to score it.
D30 Dependency Vulnerabilities — scanner not present in this environment — The backing tool was not installed where this scan ran, so this dimension was not scored. Install the tool (or run in the hosted environment, where it is always present) for a graded result.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity (jscpd) — it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
DM6 Domain ↔ infrastructure boundary: Infrastructure reached through a hand-rolled wrapper, a domain-named facade, reflection, or a string-keyed service locator resolves to a non-infra type and isn't seen; the body scan is symbol resolution over syntax, not full dataflow. A clean result means "no resolved infra reference in a domain body", not a proof of purity.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".

The LLM boundary

LLM-set scores this run (2): D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 god class(es) detected.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

Do you agree with this assessment?

D4 · Code Duplication10.0 / 10Exemplary✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 duplicated block group(s) detected.

✓ On the Gold path — maintain.

Detailed fixes: d4_recommendation.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D16 · Bus Factor9.7 / 10Exemplary✓ Tool-verified

What it measures: Whether knowledge is concentrated in too few people (the "bus factor").

Method: Living knowledge per author via time-decayed commit attribution (6-month half-life, focus weighting) across largest source files. Deterministic, avoids blame's mechanical-refactor false positives.

Maturity: Documented → Verified → Prevented · effective 9.7 / 10 · rule-coverage 100% · ceiling Documented

1 source file(s) have their living knowledge concentrated in one author (≥90% of recent, decayed contribution). The largest is modules/skunk/src/main/scala/Queries.scala.

Off-boarding risk: anonymized user #1

✓ On the Gold path — maintain.

Detailed fixes: d16_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)0.2 / 10Critical✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 0.2 / 10 · rule-coverage 100% · ceiling Documented

23 finding(s): 0 critical, 23 high, 0 medium, 0 low.

High: gha-workflow-env-secret · ×23.github/workflows/ci.yml:18detected by semgrep finding

What to do

Resolve the 23 High finding(s) in Static Analysis (SAST) — start with ci.yml (22), greetings.yml. — One of this dimension's main actionable groups (23 issue-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

D36 · Supply-chain Provenance & Signing2.5 / 10Weak✓ Tool-verified

What it measures: Whether the build pipeline provides supply-chain integrity — generated provenance/attestation, signed artifacts (cosign/sigstore), an SBOM, and pinned build actions. Presence of the configuration, not a runtime guarantee.

Method: Supply-chain provenance/signing read deterministically from CI/build config (.github/workflows, .gitlab-ci.yml, azure-pipelines, Jenkinsfile, .circleci) + the release surface: four signals — generated provenance/attestation (SLSA/in-toto/actions-attest), artifact signing (cosign/sigstore/gitsign), an SBOM (syft/sbom-action/*.spdx.json/*.cdx.json), and SHA-pinned build actions — scored 10·present/denom. NotApplicable without a build pipeline. Detects configuration presence, not runtime enforcement.

Maturity: Documented → Verified → Prevented · effective 2.5 / 10 · rule-coverage 100% · ceiling Documented

1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).

Unpinned build actions

PR-triggered workflow without a permissions block

No build provenance

No SBOM

What to do

Resolve the 1 Unpinned build actions finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 PR-triggered workflow without a permissions block finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 No build provenance finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d36_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

DM5 · Encapsulated state10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether entities protect their state (private/init-only setters) instead of exposing public setters that bypass invariants. Softened when a rehydration framework (Marten/EF) is present.

Method: Roslyn (DDD-gated): public setters on entities detected; score softened when Marten/EF rehydration frameworks present. Deterministic, framework-aware.

Coverage: Population: entities by convention; encapsulation (setter shape) checked exhaustively within the set.

Do you agree with this assessment?

DM6 · Domain ↔ infrastructure boundary10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether the domain layer stays free of infrastructure dependencies (EF/Marten/HTTP/ASP.NET) — the clean-architecture dependency rule.

Method: Roslyn (DDD-gated): domain-layer types scanned for infrastructure usage in member SIGNATURES and inside method/accessor BODIES — resolved calls and object-creations into EF/Marten/HTTP/Mongo/Redis/message-bus types (not just a namespace allowlist). Deterministic, symbol-resolved, exhaustive over domain-layer bodies, DDD-native.

Coverage: Domain layer identified by NAMESPACE heuristic; infrastructure then resolved by symbol in member SIGNATURES and method/accessor BODIES — rename the layer and the check evaporates.

Do you agree with this assessment?

DM8 · Value-object opportunities10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether clusters of primitives that travel together (a missing value object) are extracted — a low-weight suggestion, LLM-confirmed when configured.

Method: Roslyn (DDD-gated): primitive parameter clusters recurring three or more times across signatures extracted, then confirmed by language model when configured. Advisory, low-weight.

Do you agree with this assessment?

M1 · Documentation (README)6.7 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a 'Testing' section to the root README — how to run the test suite.
Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.

Do you agree with this assessment?

M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no `NNNN-title.md` documents and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

Do you agree with this assessment?

M3 · Folder & project structure8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Tests aren't grouped in a dedicated test folder — the test surface isn't separable from production code at a glance.

What to do

Group tests in the folder your build system expects (tests/, test/, spec/, or your module's test source set) so the test surface is discoverable and CI can scope it.

Do you agree with this assessment?

M4 · Documentation accuracy1.0 / 10Critical◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

README claims edomata is an event-driven automata for Scala/Scala.js/native but the evidence reveals no such module

What to do

Reconcile the README with reality: README claims edomata is an event-driven automata for Scala/Scala.js/native but the evidence reveals no such module.

Do you agree with this assessment?

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

Do you agree with this assessment?

P3 · Security & performance tooling3.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

Your ecosystem's static analyzer is declared as a dependency but is not wired into CI — run it as a required step on push/PR (e.g. `composer phpstan` / `mix sobelow` / `bundle exec brakeman` / the spotbugs Gradle task / `sbt scalafixAll --check` / `golangci-lint run` / `rebar3 lint`) so a regression fails the build instead of relying on someone running it locally.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.

What to do

Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.
Add an approval/environment gate (required reviewers / protection rules) before production promotion.

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	100%	Exemplary	Strongest area.
Architecture	100%	Exemplary	Solid.
Maturity	42%	Weak — gated by M2, M4	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	61%	Adequate — gated by P3	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	42%	Weak — gated by D29, D36	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Domain Modelling	100%	Exemplary	Solid.

Not included — 82 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
AX1 Captive dependencies — no DI registrations detected
AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX2 Stateful singletons — no singleton implementations detected
AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
D1 Cyclomatic Complexity — Most of this repository's production source (.scala) had no cyclomatic complexity computed for it, so cyclomatic complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D10 Test Quality — ~3189 lines of test source are present (.scala) but the test-quality collector reads C# only, so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included
D12 Dependency Hygiene — Dependency hygiene not measured — dependency manifest found but not parsed for hygiene
D14 License Compliance — Not scored — this repository's package manifest is not parsed for licence data yet. A gap in the analyzer's language coverage, NOT a finding that the repository's licenses are compliant (an sbt build (build.sbt)), which this pass does not parse yet — so this dimension asserts nothing about this repository's licensing in either direction.
D15 Churn × Complexity Hotspots — complexity unreadable for .scala — churn × complexity hotspots could not be measured
D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D19 Documentation Quality — LLM evaluation failed
D2 Cognitive Complexity — Most of this repository's production source (.scala) had no cognitive complexity computed for it, so cognitive complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
D22 Internal API Consistency — No exposed public API
D23 Boundary Type-Coupling — Production source is present (.scala) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (an sbt build (build.sbt) — not scanned yet) — where an OSV-supported manifest exists, dependency vulnerabilities for this repository are reported under D38 instead.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
D33 JS/npm Dependency Vulnerabilities — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.
D34 Knowledge Freshness — knowledge concentrated in recent work — freshness signal contradicted by repo activity
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D38 OSV Dependency Vulnerabilities — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
D6 Cohesion (LCOM4) — Cohesion (LCOM4) is measured over a C#/VB class graph, and this repository's production source is .scala, which this pass does not read — so no class could be assessed. Not scored — this is a gap in the analyzer, not a finding about this repository.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
D9 Test Distribution — Test source is present (.scala) but the test-pyramid classifier reads C# only, so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
DM1 Aggregate boundaries — no aggregates detected — aggregate-boundary check not applicable
DM2 Strongly-typed ids — no id-bearing domain types detected — strongly-typed-id adoption not assessable
DM3 Integration-event coupling — no integration events detected — coupling check not applicable
DM4 Rich vs anemic model — no data-bearing entities detected — rich-vs-anemic model not assessable
DM7 Repository granularity — no repository abstraction detected (e.g. uses a document session)
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
GD1 Unfinished & placeholder code — no source files
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (`sbt clean coverage test coverageReport` via sbt-scoverage) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Issue — 23 finding(s)

D29 · Static Analysis (SAST) · High · ×23

High: gha-workflow-env-secret .github/workflows/ci.yml:18 — A secret is exposed in the workflow-level `env:` block, making it available to every job and step in this workflow — including any untrusted code run in pull-request workflows. Scope secrets as narrowly as possible: prefer step-level `env:` so the secret is only available where it is actually needed. This is a semgrep security-AUDIT rule reporting a POLICY that is absent or weaker than its recommendation, not an exploitable defect. Confirm whether the current setting is a deliberate decision for this repository — and apply the change where it is not; where it is (a policy your release process already enforces elsewhere, or one this repository has consciously opted out of), record the decision and leave the configuration as it is.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:43 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v6`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:48 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: sbt/setup-sbt@<40-character SHA>`. This step references `sbt/setup-sbt@v1`; resolve the SHA it points at today with `gh api repos/sbt/setup-sbt/commits/v1 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:59 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: cachix/install-nix-action@<40-character SHA>`. This step references `cachix/install-nix-action@v17`; resolve the SHA it points at today with `gh api repos/cachix/install-nix-action/commits/v17 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:100 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/upload-artifact@<40-character SHA>`. This step references `actions/upload-artifact@v5`; resolve the SHA it points at today with `gh api repos/actions/upload-artifact/commits/v5 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:116 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v6`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:121 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: sbt/setup-sbt@<40-character SHA>`. This step references `sbt/setup-sbt@v1`; resolve the SHA it points at today with `gh api repos/sbt/setup-sbt/commits/v1 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:132 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: cachix/install-nix-action@<40-character SHA>`. This step references `cachix/install-nix-action@v17`; resolve the SHA it points at today with `gh api repos/cachix/install-nix-action/commits/v17 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:135 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/download-artifact@<40-character SHA>`. This step references `actions/download-artifact@v6`; resolve the SHA it points at today with `gh api repos/actions/download-artifact/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:145 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/download-artifact@<40-character SHA>`. This step references `actions/download-artifact@v6`; resolve the SHA it points at today with `gh api repos/actions/download-artifact/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:155 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/download-artifact@<40-character SHA>`. This step references `actions/download-artifact@v6`; resolve the SHA it points at today with `gh api repos/actions/download-artifact/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:198 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v6`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:203 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: sbt/setup-sbt@<40-character SHA>`. This step references `sbt/setup-sbt@v1`; resolve the SHA it points at today with `gh api repos/sbt/setup-sbt/commits/v1 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:214 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: cachix/install-nix-action@<40-character SHA>`. This step references `cachix/install-nix-action@v17`; resolve the SHA it points at today with `gh api repos/cachix/install-nix-action/commits/v17 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:217 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: scalacenter/sbt-dependency-submission@<40-character SHA>`. This step references `scalacenter/sbt-dependency-submission@v2`; resolve the SHA it points at today with `gh api repos/scalacenter/sbt-dependency-submission/commits/v2 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:231 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v6`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:236 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/setup-java@<40-character SHA>`. This step references `actions/setup-java@v5`; resolve the SHA it points at today with `gh api repos/actions/setup-java/commits/v5 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:241 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: coursier/setup-action@<40-character SHA>`. This step references `coursier/setup-action@v1`; resolve the SHA it points at today with `gh api repos/coursier/setup-action/commits/v1 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:267 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/checkout@<40-character SHA>`. This step references `actions/checkout@v6`; resolve the SHA it points at today with `gh api repos/actions/checkout/commits/v6 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:272 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: sbt/setup-sbt@<40-character SHA>`. This step references `sbt/setup-sbt@v1`; resolve the SHA it points at today with `gh api repos/sbt/setup-sbt/commits/v1 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:283 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: cachix/install-nix-action@<40-character SHA>`. This step references `cachix/install-nix-action@v17`; resolve the SHA it points at today with `gh api repos/cachix/install-nix-action/commits/v17 --jq .sha`.
High: github-actions-mutable-action-tag .github/workflows/ci.yml:290 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: peaceiris/actions-gh-pages@<40-character SHA>`. This step references `peaceiris/actions-gh-pages@v4.0.0`; resolve the SHA it points at today with `gh api repos/peaceiris/actions-gh-pages/commits/v4.0.0 --jq .sha`. Note that `v4.0.0` is an exact release tag rather than a floating major: it is still mutable (a tag can be repointed), but by convention it moves only on a force-push, so pin the floating-major and branch references in this file first.
High: github-actions-mutable-action-tag .github/workflows/greetings.yml:12 — GitHub Actions step uses a mutable tag or branch reference. Tags and branch names can be silently repointed by the action owner, enabling supply-chain attacks — as seen in the trivy-action and kics-github-action compromises. Pin the reference to a full 40-character commit SHA instead, e.g. `uses: actions/first-interaction@<40-character SHA>`. This step references `actions/first-interaction@v1`; resolve the SHA it points at today with `gh api repos/actions/first-interaction/commits/v1 --jq .sha`.

Warning — 3 finding(s)

D19 · Documentation Quality · LLM evaluation failed · ×1

LLM evaluation failed — JSON parse error: Expected end of string, but instead reached end of data. Path: $.findings[0].suggestion | LineNumber: 0 | BytePositionInLine: 1194.

D36 · Supply-chain Provenance & Signing · Unpinned build actions · ×1

Unpinned build actions — CI references GitHub Actions by a floating ref (@main / @tag) rather than a pinned commit SHA, weakening build integrity. 22 floating ref(s) across 2 workflow file(s). Each floating ref is itemized at file:line by the SAST (D29) lens.

D36 · Supply-chain Provenance & Signing · PR-triggered workflow without a permissions block · ×1

PR-triggered workflow without a permissions block — 1 workflow(s) triggered by pull_request declare no `permissions:` block (ci.yml) and so run with the repository's default GITHUB_TOKEN scope, while 1 sibling workflow in the same repository is already scoped. Pull-request runs build the least-trusted code in the repository; give each of these workflows its own least-privilege block — `permissions: {contents: read}` at the top of the workflow, widened per job only where a job genuinely writes.

Recommendation — 7 finding(s)

D11 · Test Reliability · Test reliability not included · ×1

Test reliability not included — Test source is present (.scala) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.

D15 · Churn × Complexity Hotspots · complexity unreadable for .scala · ×1

complexity unreadable for .scala — churn × complexity hotspots could not be measured — A hotspot is churn × complexity. Churn was measured (155 line(s) across the 90-day window), but no complexity could be computed for .scala, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.

D16 · Bus Factor · Off-boarding risk · ×1

Off-boarding risk: anonymized user #1 — If anonymized user #1 becomes unavailable, 1 significant file(s) lose their only recent owner: modules/skunk/src/main/scala/Queries.scala. Pair on, review, or document these before any departure.

D34 · Knowledge Freshness · knowledge concentrated in recent work · ×1

knowledge concentrated in recent work — freshness signal contradicted by repo activity — File-level freshness contradicts repo activity: 40 commits in the last 90 days, yet 34 of 36 significant files carry no living knowledge. Those two readings cannot both be true, so the per-file recency signal is treated as unreliable here and freshness is not scored for this run.

D36 · Supply-chain Provenance & Signing · No build provenance · ×1

No build provenance — No SLSA provenance generation or build attestation found in CI — nothing binds a released artifact to the build that produced it, so a consumer cannot tell your artifact from a substituted one. On GitHub Actions, `actions/attest-build-provenance` (or slsa-github-generator) emits one from the job's own OIDC identity; elsewhere, run `cosign attest` over the released artifact from the release pipeline and publish the attestation beside it.

D36 · Supply-chain Provenance & Signing · No SBOM · ×1

No SBOM — No SBOM generation or committed SBOM found — produce one with what your ecosystem ships (`syft` (or `anchore/sbom-action` in CI) over the source tree or released image). Publish it as a release asset (`*.spdx.json` / `*.cdx.json`) so consumers can see what they are installing.

D8 · Code Coverage · Coverage not included · ×1

Coverage not included — suite not readable by the collector — Coverage NOT MEASURED: test source is present (.scala) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (`sbt clean coverage test coverageReport` via sbt-scoverage) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored.

Info — 2 finding(s)

D12 · Dependency Hygiene · Dependency hygiene not measured · ×1

Dependency hygiene not measured — dependency manifest found but not parsed for hygiene — This repository's dependency manifest (an sbt build (build.sbt)) was found, but this pass cannot parse it for hygiene, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D38 wherever the manifest is OSV-readable.

D22 · Internal API Consistency · No exposed public API · ×1

No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Findings	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .	0	artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --json --quiet --timeout 0 --metrics off .	23	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	none (no readable dependency manifest)	—	none (no readable dependency manifest): not present in this environment	0	—
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.	0	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.	0	—
D33 · JS/npm Dependency Vulnerabilities	trivy	—	trivy: not applicable — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.	0	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	0	—
D38 · OSV Dependency Vulnerabilities	osv-scanner	—	osv-scanner: not applicable — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.	0	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	0	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	0	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	0	—

Run 019fca5f-924d-7277-b1b4-c82e5e073601 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Hnaderi/edomata

Executive summary

Top priorities

Diagnosis — what's actually going on

Architecture — module dependency matrix

At a glance — Code Health · 100% · Exemplary

At a glance — Architecture · 100% · Exemplary

At a glance — Maturity · 42% · Weak · gated by M2, M4

At a glance — Readiness · 61% · Adequate · gated by P3

At a glance — Security · 42% · Weak · gated by D29, D36

At a glance — Domain Modelling · 100% · Exemplary

Security & Compliance — OWASP Top-10 mapping

Roadmap

File quality

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts