Public report of hookdeck/supahooks, published 22 October 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.10.5). Watchdog signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 22 October 2026, 16:30 UTC · Survey ID cd_4765891af9074f35aaed1584f3c6fea8

hookdeck/supahooks

Measured 22 October 2026, 16:12 UTC, at code version 26372d5

Test distribution: not measured

Test distribution is not measured: No automated tests.

CAI score 35out of 100 At risk Down 2 since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

Performance 100 Exemplary Architecture 98 Exemplary Security and Compliance 83 Adequate Code Health 60 Adequate Accessibility 47 Weak Maturity 40 Weak Production Readiness 15 Critical

A very small codebase: 1,800 lines of product code in 1 project, tests not counted · Estimated rebuild effort: about 0.1 person-years · Weakest lens: Production Readiness, 15

Findings by how serious they are

27 critical 35 serious 30 minor

11 dimensions are left out of the score. For each one, Watchdog either couldn't measure it in this code, or found no evidence of the safeguard it looks for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Watchdog
Producer
Canine Development
Analyzer
Watchdog engine 1.0.0
Measured
22 October 2026, 16:12 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds Watchdog. It is open to any tool that implements it, and today Watchdog is the only one that does.

A critical security finding is open, such as a library with a known critical vulnerability or a password or key found in the code. The score itself is unchanged, but its band shows At risk until the finding is fixed. See the Security and Compliance lens.

The score is deterministic, which means the same code always gets the same score. Watchdog works it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

67of 70 dimensions measured by tools. The other 3 are advisory notes from an AI model, which explain the code but don't count towards the score.
68of 92 findings point to an exact file and line, so you can open each one in the code. The other 24 concern the repository as a whole, such as missing documentation.
70dimensions across 7 lenses, read from 1,800 lines of product code in 1 project.
Chapters

Executive summary

hookdeck/supahooks scores 35 out of 100, but it is rated At risk while a critical security finding is open; the score itself is unchanged.

The weakest lens counts most in the score, and here that is Production Readiness, which scores 15 and is rated Critical. Its Code Coverage dimension scores 0 out of 10, and until that reaches 4, Production Readiness can't be rated higher than Adequate. The first actions are to resolve the 1 No automated tests finding(s) in Code Coverage and to resolve the 1 No tests found finding(s) in Test Distribution, and if Production Readiness rose to 70, the score would rise from 35 to about 51.

27 findings are critical: 19 in Dependency Vulnerabilities, three in Forms & labels, two in Static Analysis (SAST), one in Code Coverage, one in Dependency Hygiene and one in Keyboard semantics.

Watchdog couldn't measure 8 dimensions in this code, among them Navigability, Data Protection and Audit Trail, so they are left out of the score. The product code is 1,800 lines, which would take an estimated 0.1 person-years, around €1,500, to rebuild.

Code Health 60 Adequate Architecture 98 ★ Exemplary Maturity 40 Weak, capped by Knowledge Freshness and Architecture documentation Production Readiness 15 ⚠ Critical, capped by Code Coverage, Test Distribution, Test Coverage, Tooling, CI/CD gates, Observability and Security & performance tooling Security and Compliance 83 Adequate, capped by Dependency Vulnerabilities Accessibility 47 Weak, capped by Keyboard semantics Performance 100 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Production Readiness 15 · counts for 46%Maturity 40 · counts for 25%Accessibility 47 · counts for 14%Code Health 60 · counts for 8%Security and Compliance 83 · counts for 4%Architecture 98 · counts for 2%Performance 100 · counts for 1%

If Production Readiness rose from 15 to 70, the lowest score rated Strong, the score would rise from 35 to about 51.

Code composition: what the lines of code are
Product code 100%
New since the last survey: 10 findings

These 10 critical or serious findings weren't in the previous survey, on 8 October 2026.

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 1 finding

This critical or serious finding was in the previous survey, on 8 October 2026, and is gone from this one.

  • Dependency Vulnerabilities · Critical vulnerability: [GHSA redacted] REDACTED
Rebuild cost: about €1,500 · Estimate
Cost to rebuild€510 to €2,600, for 8 to 27 hours of work, about 0.1 person-years for one engineer
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 35. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeVery small: 1,800 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 1 No automated tests finding(s) in Code Coverage.
Raises the score by about 15 points · Low effort · Code Coverage
2
Resolve the 1 No tests found finding(s) in Test Distribution.
Raises the score by about 15 points · Low effort · Test Distribution
3
Resolve the 7 Orphaned file finding(s) in Knowledge Freshness — start with events-table.tsx, hookdeck.ts, database.types.ts.
Raises the score by about 5 points · Low effort · Knowledge Freshness

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

If you do one thing first · First action
Resolve the 1 No automated tests finding(s) in Code Coverage. Of all the actions in this report, it raises the score most for the work it takes: about 15 points for low effort, because it clears the 1 Code Coverage findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort

At a glance — Code Health · 60% · Adequate ·

The Good
D1 · TypeScript Cyclomatic Complexity 9.6 D2 · TypeScript Cognitive Complexity 10.0 D3 · TypeScript God Classes 8.7 D17 · TypeScript Explicit Debt 10.0 GD1 · Repo Unfinished & placeholder code 10.0 IC1 · Repo Incompleteness & stubs 10.0 R1 · React / TS Type Safety 10.0 R10 · React / TS Code Duplication 9.0 R2 · React / TS Cyclomatic Complexity 7.0 R3 · React / TS Large Files 10.0 X12 · Repo Unreachable branch 10.0 X13 · Repo Undrained process stream 10.0 X16 · Repo Unfloored truncation loop 10.0 X18 · Repo Disposal-pattern correctness 10.0 X19 · Repo Unrestored process-global state 10.0 X21 · Repo Side-effecting pattern guard 10.0 X22 · Repo Contradicted release guard 10.0 X23 · Repo Unguarded diagnostic materialisation 10.0 X25 · Repo Inert configuration knob 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X30 · Repo Support guard that admits what it rejects 10.0 X5 · Repo Nullable reference types 7.0
The Bad
R7 · React / TS Dead Code 6.0 X1 · Repo Async correctness 6.6
The Ugly
X2 · Repo Cancellation propagation 4.0 X3 · Repo Exception handling 4.8

At a glance — Architecture · 98% · Exemplary ·

The Good
D26 · TypeScript Project Cohesion 10.0 D35 · TypeScript Change Coupling 10.0 AX10 · Repo Code composition 9.4 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 R9 · React / TS Circular Imports 10.0

At a glance — Maturity · 40% · Weak · gated by D34, M2 ·

The Good
D15 · TypeScript Churn × Complexity Hotspots 10.0 D19 · TypeScript Documentation Quality 8.0 D21 · TypeScript Naming Consistency 10.0 M3 · Repo Folder & project structure 8.0 M4 · Repo Documentation accuracy 10.0
The Bad
M1 · Repo Documentation (README) 6.7
The Ugly
D20 · TypeScript ADR Quality 0.0 D34 · TypeScript Knowledge Freshness 0.0 M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 15% · Critical · gated by D8, D9, R4, R6, P1, P2, P3 ·

The Good
D12 · TypeScript Dependency Hygiene 8.1 D13 · TypeScript Secret Scanning 10.0 D14 · TypeScript License Compliance 10.0 R5 · React / TS Dependency Freshness 9.1 R8 · React / TS Dependency Hygiene 7.5
The Ugly
D8 · TypeScript Code Coverage 0.0 P1 · Repo CI/CD gates 0.0 P2 · Repo Observability 0.0 P3 · Repo Security & performance tooling 3.0 R4 · React / TS Test Coverage 0.0 R6 · React / TS Tooling 3.3

At a glance — Security · 83% · Adequate · gated by D30 ·

The Good
D28 · TypeScript Secrets (history) 10.0 D43 · TypeScript Malicious Dependencies 10.0 D44 · TypeScript Platform End-of-Life 10.0 C2 · Repo Access Controls 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0 X17 · Repo Uncapped recursion over a caller-supplied document 10.0 X24 · Repo Document value interpolated into markup unescaped 10.0
The Bad
D29 · TypeScript Static Analysis (SAST) 5.5
The Ugly
D30 · TypeScript Dependency Vulnerabilities 0.0

At a glance — Accessibility · 47% · Weak · gated by AC4 ·

The Good
AC3 · Repo Page structure 10.0 AC6 · Repo Visual & motion safety 10.0
The Bad
AC2 · Repo Forms & labels 5.4
The Ugly
AC4 · Repo Keyboard semantics 1.0 AC7 · Repo A11y enforcement 4.0

At a glance — Performance · 100% · Exemplary ·

The Good
PF3 · Repo Async & latency hygiene 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A03:2025 — Software Supply Chain Failures31High / Critical
A05:2025 — Injection7High / Critical

Roadmap

Begin by addressing the lack of automated tests and test distribution to ensure code reliability. Next, update seven orphaned files, specifically starting with events-table.tsx, hookdeck.ts, and database.types.ts, to improve knowledge freshness. Finally, document architectural decisions and remove three deprecated dependencies to maintain system hygiene and clarity.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 1 No automated tests finding(s) in Code Coverage.+15.2 ptsLowCode Coverage
Resolve the 1 No tests found finding(s) in Test Distribution.+15.2 ptsLowTest Distribution
Resolve the 7 Orphaned file finding(s) in Knowledge Freshness — start with events-table.tsx, hookdeck.ts, database.types.ts.+5.4 ptsLowKnowledge Freshness
Resolve the 1 No ADRs found finding(s) in ADR Quality.+4.6 ptsLowADR Quality
Resolve the 3 Deprecated finding(s) in Dependency Hygiene — start with REDACTED (3).+4.5 ptsLowDependency Hygiene
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.+4.3 ptsMediumArchitecture documentation
Add a CI workflow that builds and runs the test suite on every push/PR.+3.3 ptsMediumCI/CD gates
Adopt pino (or winston) and log at meaningful points in the services you run.+3.3 ptsMediumObservability

File quality

Per-file score 0–10 — a quality signature. Of 10 files carrying findings, judged against the Production bar: 10% slop · 90% mixed · 0% near-clean.

FileScoreBandWorst signal
REDACTED0.0SlopDependency Vulnerabilities: Critical CVE: REDACTED
REDACTED7.2MixedStatic Analysis (SAST): High: REDACTED
REDACTED7.2MixedStatic Analysis (SAST): High: REDACTED
package.json7.4MixedDependency Hygiene: Deprecated: @hookdeck/sdk
src/app/components/dashboard/events-table.tsx7.8MixedCyclomatic Complexity: events-table.EventsTable (cyclomatic 20)
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 27

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 35

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 30

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 11

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 67 of 70 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 1.0 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 70 dimensions across the health lenses
D1D2D3D8D9D12D13D14D15D17D19D20D21D26D28D29D30D34D35D43D44AC2AC3AC4AC6AC7AX10AX3AX4C2GD1IC1M1M2M3M4P1P2P3PF3R1R10R2R3R4R5R6R7R8R9X1X12X13X14X15X16X17X18X19X2X21X22X23X24X25X28X29X3X30X5

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 68 of 92 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Watchdog duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivySecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurementLocal LLM◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a16462-c442-7649-8863-5f11c8eeb34e.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-contributor repository — bus factor is not applicable (1 contributor(s) across 79 commit(s) sampled, automation and bot accounts excluded). Concentration needs a team to concentrate: with one contributor there is nobody to spread the knowledge to, so there is nothing here for the owner to act on.
  • D22 Internal API Consistency — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's source is written only in languages whose packages are published through a manifest, and no manifest in the tree makes a publication act: either there is no package manifest of any ecosystem (no package.json, pyproject.toml, setup.py, gemspec, Cargo.toml, pom.xml, build.gradle, composer.json, pubspec.yaml or mix.exs), or every one present declares in its package manager's own terms that it is not published (an npm package marked "private": true, a Cargo package with publish = false, a pubspec with publish_to: none, a Composer "project", a Poetry project with package-mode = false, or the "Private :: Do Not Upload" classifier). With no publication act there is no intentionally-exposed surface for API consistency to be judged over.
  • D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
  • AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DevServer (dev). the dev server did not expose a crawlable HTTP endpoint in time — no runtime evidence.
  • C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. '@supabase/supabase-js' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. '@supabase/supabase-js' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. '@supabase/supabase-js' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. '@supabase/supabase-js' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
  • P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
  • S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 31 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled certificate validation and obsolete TLS versions, and none was found. The server controls this dimension also scores were not assessed, so no score is given.
  • X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP make no call through a named logger, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D8 Code Coverage: Coverage is measured by building and running the test suite inside Watchdog's isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
  • D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
  • D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
  • D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
  • D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
  • D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
  • AC2 Forms & labels: Label association is read from static markup — a label wired up at runtime (JS-set aria-labelledby, framework-injected ids) reads as missing, a present label says nothing about whether its text is correct. A known UI-library field component (e.g. a JSX <TextField>) is now checked conservatively — flagged only when it carries NO label/aria-label/aria-labelledby/id/name — but wrapper/context-labelled libraries (Chakra/Radix FormControl+FormLabel) aren't statically visible (possible false positive) and non-JSX lowercased components are still skipped. A click handler on a plain element is now asked for a name too (it is a control the author declared), but the subtree test that answers it is deliberately generous: any DYNAMIC text expression in the subtree counts as a name, so an icon chosen by a ternary ({cond ? <IconA/> : <IconB/>}) reads as named, and a glyph component from a library the icon-import list does not know still names its parent. A clean result is "no unlabelled control found", not a labelling proof.
  • AC3 Page structure: Page structure is read from the static markup tree — landmarks, headings and lang injected at runtime aren't seen, heading ORDER is checked structurally (not against the rendered visual hierarchy), and lang/title/main fire only on full documents, never partials, and the data-table check sees header-cell presence (a <th> exists), not whether each header correctly associates with its cells. Static readiness, not conformance.
  • AC4 Keyboard semantics: Keyboard semantics are inferred from markup attributes — interactivity wired purely in script, focus managed at runtime, and component-level handlers are invisible. A clean result means "no static keyboard-trap shape", not a keyboard-operability proof.
  • AC6 Visual & motion safety: Contrast and motion safety are PARTIAL by construction — literal colours (hex/rgb/hsl/named) in inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS top-level declarations are read (same-rule/same-element colour+background pairs only); computed/runtime/theme colour, external-CDN stylesheets, CSS-in-JS dynamic (${…}) and nested-selector colours, cross-element pairs and image contrast stay out of reach, so a clean result is bounded by what the static CSS itself shows.
  • AC7 A11y enforcement: Enforcement is scored from in-repo config/CI evidence only — an a11y gate enforced in external tooling with no in-repo trace can't be credited, and a configured linter is presence, not proof the rules actually run or block a merge.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity9.6 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Prevented

1 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was events-table.EventsTable at 20.

events-table.EventsTable (cyclomatic 20)src/app/components/dashboard/events-table.tsx:15

What to do

  1. Bring the 1 body over 15 down to 15 or less in Cyclomatic Complexity — start with events-table.EventsTable (cyclomatic 20). — Refactoring it lifts Cyclomatic Complexity from 9.6 to about 10.0/10.
  2. Stand up a CI pipeline, then gate Cyclomatic Complexity in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

D2 · Cognitive Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cognitive complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d2_recommendation.md.

D3 · God Classes8.7 / 10Strong✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.7 / 10 · rule-coverage 100% · ceiling Prevented

1 over-large unit(s) detected — types, modules or files that carry too much.

FunctionTooLong: events-table.EventsTablesrc/app/components/dashboard/events-table.tsx:15

What to do

  1. Resolve the 1 FunctionTooLong finding(s) in God Classes — start with events-table.tsx. — One of this dimension's main actionable groups (1 warning-level).
  2. Stand up a CI pipeline, then gate God Classes in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

D8 · Code Coverage0.0 / 10Critical✓ Tool-verified

What it measures: How much of the code is actually exercised by tests.

Method: Coverage from coverlet runs or committed reports (Cobertura/OpenCover/lcov), computed per-file with structured exclusions for generated, trivial, and glue code. When the suite can't be built/run in-image AND no report is committed, coverage is reported NOT-MEASURED (excluded from the score) with the precondition to make it measurable — never a LoC-ratio proxy folded in as if measured. Deterministic.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Verified

No automated tests — no test code was found in this repository.

No automated tests

What to do

  1. Resolve the 1 No automated tests finding(s) in Code Coverage. — One of this dimension's main actionable groups (1 issue-level).
  2. Stand up a CI pipeline, then gate Code Coverage in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d8_recommendation.md · top locations in Appendix A, every location in findings.md.

D9 · Test Distribution0.0 / 10Critical✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No test suite found.

No tests found

What to do

  1. Resolve the 1 No tests found finding(s) in Test Distribution. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d9_recommendation.md · top locations in Appendix A, every location in findings.md.

D12 · Dependency Hygiene8.1 / 10Strong✓ Tool-verified

What it measures: Whether dependencies are current, secure, and not bloated.

Method: Manifest scan via dotnet list package across all projects; worst-signal-per-package deduction (saturating for vulnerabilities, capped-linear for deprecation/outdated) per KLoC. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 8.1 / 10 · rule-coverage 100% · ceiling Verified

9 outdated direct production npm dependency(ies) of 9 graded, 0 pinning defect(s), across 1 package.json (1 of them the product) and 1 committed lockfile(s). Development dependencies are deliberately not graded for currency: that grade is about what SHIPS. 3 direct dependency(ies) — production, development or optional — are marked DEPRECATED by their publisher (the registry's per-version mark, or the lockfile's copy of it when the registry could not be asked); deprecated transitive packages are listed but not charged. Whether any is UNMAINTAINED is not graded — the registry publishes no maintenance status, and release age does not stand in for one. Whether any is UNUSED is not graded either: that is a source question, and the frontend dependency lens (R8) answers it in this same run. Known CVEs in this dependency graph are D30's question, read from the manifest there.

Deprecated: @hookdeck/sdk · ×3package.json:14
Deprecated: har-validator · ×3REDACTED:2992
Outdated (npm): @hookdeck/sdk · ×9

What to do

  1. Resolve the 3 Deprecated finding(s) in Dependency Hygiene — start with package.json (3). — One of this dimension's main actionable groups (3 warning-level).
  2. Resolve the 3 Deprecated finding(s) in Dependency Hygiene — start with REDACTED (3). — One of this dimension's main actionable groups (3 recommendation-level).
  3. Stand up a CI pipeline, then gate Dependency Hygiene in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d12_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

D14 · License Compliance10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether the licenses of third-party packages are compatible with your policy.

Method: Third-party package licenses resolved from declared package metadata and checked against the configured policy (allow/deny/copyleft). Deterministic; clean = no incompatible license found at metadata depth.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 of 9 shipped npm package(s) use a banned license. Licences were resolved from registry.npmjs.org over the 9 production dependency(ies) this repository's committed lockfile resolves, across 1 product package.json manifest(s). Its 10 `devDependencies` declaration(s) are excluded: a consumer installs none of them. ★ DEPTH: this is the DIRECT production set the lockfile resolves, NOT the transitive closure — only one of the four lock dialects this pass reads states a full graph, so a banned licence pulled in only by a dependency's OWN dependencies is outside this verdict, exactly as the JVM arm's declaration-site verdict is. ★ Each licence is the one the registry publishes for the package's CURRENT release rather than for the pinned version, which is the same caveat the Hex and RubyGems arms carry. 1 of them publish no licence this pass can read on registry.npmjs.org — an absent field, `UNLICENSED`, or a `SEE LICENSE IN <file>` pointer into a tarball this pass does not download; that is missing data, not a violation, and none of them is charged.

✓ On the Gold path — maintain.

Detailed fixes: d14_recommendation.md.

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

D17 · Explicit Debt10.0 / 10Exemplary○ Nothing flagged

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 deducted task-comment markers across 1800 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

✓ On the Gold path — maintain.

Detailed fixes: d17_recommendation.md.

D19 · Documentation QualityStrong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The repository's single README (README.md) is a well-structured root-level document that states what it does (demonstrating using Hookdeck as an outbound webhook infrastructure template), shows a demo image, and links to YouTube. It explains the project's purpose, the three core concepts (Connection, Destination, Source), and gets started by installing dependencies, getting Hookdeck API key/signing secret, and Supabase credentials for publishing events, with clipped .env.local setup notes. The document is complete within its own body but lacks a dedicated architecture or design doc, so it does not fall under the missing-architecture-docs category.

What to do

  1. Improve Documentation Quality — currently 8.0/10. — The repository's single README (README.md) is a well-structured root-level document that states what it does (demonstrating using Hookdeck as an outbound webhook infrastructure template), shows a demo image, and links to YouTube. It explains the project's purpose, the three core concepts (Connection, Destination, Source), and gets started by installing dependencies, getting Hookdeck API key/signing secret, and Supabase credentials for publishing events, with clipped .env.local setup notes. The document is complete within its own body but lacks a dedicated architecture or design doc, so it does not fall under the missing-architecture-docs category.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 1 build units (npm) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Secret scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

D29 · Static Analysis (SAST)5.5 / 10Adequate✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 5.5 / 10 · rule-coverage 100% · ceiling Documented

7 finding(s): 0 critical, 2 high, 5 medium, 0 low.

REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 5 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (4), REDACTED. — One of this dimension's main actionable groups (5 warning-level).
  2. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
  3. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities0.0 / 10Critical✓ Tool-verified

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over osv.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

31 finding(s): 5 critical, 14 high, 9 medium, 3 low.

REDACTED
REDACTED
REDACTED
REDACTED
REDACTED

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

  1. Resolve the 14 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (14). — One of this dimension's main actionable groups (14 issue-level).
  2. Resolve the 4 Critical CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (4). — One of this dimension's main actionable groups (4 issue-level).
  3. Resolve the 1 Critical vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

D34 · Knowledge Freshness0.0 / 10Critical✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

7 of 7 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/app/components/dashboard/events-table.tsx. Counted over 7 of the 36 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned file · ×7src/app/components/dashboard/events-table.tsx:1
Orphaned files with no living knowledge

What to do

  1. Resolve the 7 Orphaned file finding(s) in Knowledge Freshness — start with events-table.tsx, hookdeck.ts, database.types.ts. — One of this dimension's main actionable groups (7 recommendation-level).
  2. Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No dependency in any ecosystem this repository declares is published as malicious.

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md.

D44 · Platform End-of-Life10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 0 platform declaration(s) and 9 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

✓ On the Gold path — maintain.

Detailed fixes: d44_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AC2 · Forms & labels5.4 / 10Adequate✓ Tool-verified

Other · Accessibility — Whether form controls have a programmatic label (an associated label, aria-label or aria-labelledby), buttons have text, links have an accessible name, a click handler on a plain element names the control it declares, fieldsets have a non-empty legend, known UI-library field components carry a label prop, and a placeholder isn't used as the only label. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: inputs/selects/textareas checked for an associated label[for]/wrapping label/aria-label/aria-labelledby (per document), buttons for accessible text, fieldsets for a legend; placeholder-only labelling flagged. Deterministic, hard fact per control.

Coverage: Population: form controls, buttons, links, fieldsets and known UI-library field components in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx); components, hidden subtrees and spread/dynamic-attribute elements are skipped, so a control whose label arrives through a spread or a runtime expression is deliberately not judged. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

  • This control has no associated label. Add a <label htmlFor> / wrapping <label> / aria-label / aria-labelledby so assistive tech can name it. — src/app/components/dashboard/account-bar.tsx:29
  • A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one). — src/app/components/dashboard/webhook-delete-button.tsx:43
  • This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label htmlFor>, a wrapping <label>, or aria-label. — src/app/components/dashboard/webhook-registrations-from.tsx:30

What to do

  • Give every control a programmatic label (a <label for> / wrapping <label> / aria-label) and every button text — a placeholder is not a label.
AC3 · Page structure10.0 / 10Exemplary○ Nothing flagged

Other · Accessibility — Whether pages declare a language (well-formed BCP-47) and a non-empty title, expose exactly one main landmark and a sane heading order with non-empty headings, keep zoom enabled, title their iframes, give data tables header cells, and avoid meta-refresh. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: html lang, document <title>, a main landmark and heading order on full documents only, plus zoom-disabling viewports, untitled iframes and meta-refresh anywhere. Deterministic, per structural checkpoint.

Coverage: Population: the PARSED MARKUP documents (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx). The page-level checks — lang, title, single main landmark — fire ONCE PER FULL DOCUMENT (an <html> root) and never on a partial or component fragment, so a repo of fragments is assessed only on the per-element checks (heading order, table headers, iframe titles, meta-refresh, zoom). Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

AC4 · Keyboard semantics1.0 / 10Critical✓ Tool-verified

Other · Accessibility — Whether interactive behaviour is keyboard-reachable — no click handler on a non-interactive element lacking a role, tabindex and key handler, no element the repo's own CSS styles `cursor: pointer` without giving it any of the three, no unfocusable element whose only binding is a mouse enter/leave pair or a double-click, no positive tabindex, no href-less anchor, no placeholder-href (#/javascript) link acting as a button. Static markup readiness, not a WCAG conformance claim.

Method: Static markup-model scan: click handlers on non-interactive elements lacking role+tabindex+key handler, positive tabindex values, and href-less anchors. Components skipped, spreads suppressed. Deterministic, hard fact per element.

Coverage: Population: elements that pose a keyboard-semantics question, in the PARSED MARKUP files only (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx) — a non-natively-interactive element carrying a click handler, a double-click or hover enter/leave binding, a pointer-only gesture on a tabindex="0" element, or `cursor: pointer` from the repo's own CSS; an href-less or placeholder-href (#, javascript:) anchor; and any element with a positive tabindex. Natively interactive elements used correctly (<button>, <a href>, form controls) are NOT in the population — there is nothing to judge — so a page of nothing but correct controls gives AC4 nothing to measure. Keyboard reachability is judged from the markup, never from a rendered page. ★ An interactive element declared in a tagged-template (html`…`) or hyperscript frontend is NOT in this population — no producer reads either — so an empty population is reported as an analyzer gap, never as "this repository has no interactive elements".

  • A click handler on a plain element isn't keyboard-operable. Use a <button>, or add role + tabIndex={0} + a key handler. — src/app/components/dashboard/events-table.tsx:92

What to do

  • Make custom controls keyboard-operable (role + tabindex + key handler), drop positive tabindex, and give anchors a real href.
AC6 · Visual & motion safety10.0 / 10Exemplary○ Nothing flagged

Other · Accessibility — Whether focus outlines aren't removed without a replacement, motion respects prefers-reduced-motion, and literal CSS colour pairs meet contrast — PARTIAL: inline styles, in-repo <style> blocks, in-repo .css files, var() tokens, Tailwind neutral utilities and CSS-in-JS literals are read (hex/rgb/hsl/named), never computed/runtime/external-CDN colour. Static markup readiness, not a WCAG conformance claim.

Method: Static markup/CSS scan: inline outline:none/0, literal inline colour/background contrast against the 4.5:1 AA floor, and <style>-block animation without a prefers-reduced-motion guard. Deterministic but PARTIAL — only inline styles and in-repo CSS literals are visible.

Coverage: Population: styled elements in the PARSED MARKUP files (.html/.htm/.cshtml/.razor/.vue/.svelte/.jsx/.tsx), plus in-repo <style> blocks, in-repo .css files and CSS-in-JS literals. Colour contrast is computed from LITERAL colour pairs only (hex/rgb/hsl/named, including var() tokens and Tailwind neutral utilities) — computed, runtime-themed and external-CDN colour is never resolved, so this is a partial read of contrast by construction. Markup built in script — tagged-template (html`…`) UIs and hyperscript DOM factories — is not read at all.

AC7 · A11y enforcement4.0 / 10Weak✓ Tool-verified

Other · Accessibility — Whether accessibility is ENFORCED in the toolchain — an accessibility checker configured over the markup (an a11y lint rule set, e.g. eslint-plugin-jsx-a11y or vuejs-accessibility where the project lints JavaScript) and an automated accessibility assertion wired into tests or CI (axe/pa11y/Lighthouse or an equivalent) — on the Documented→Verified→Prevented ladder.

Method: Repo config/CI scan: an accessibility checker configured over the markup (an a11y lint rule set such as eslint-plugin-jsx-a11y / vuejs-accessibility where JavaScript is linted) and an automated accessibility assertion in tests or CI (axe/pa11y/Lighthouse or equivalent), graded on the Documented→Verified→Prevented rungs. Deterministic, presence/rung detection.

Coverage: Population: the repository's own tooling configuration — lint config, test and CI files — NOT the markup. It is read for a configured accessibility checker and an automated accessibility assertion (axe/pa11y/Lighthouse, or a native-toolkit equivalent), and it credits an INVOCATION, never a mention: a licence filename, an import comment or a doc reference earns no rung. Enforcement configured entirely outside the repository leaves no evidence here and cannot be credited.

  • No accessibility enforcement found — no a11y linter (eslint-plugin-jsx-a11y) and no axe/pa11y/Lighthouse in tests or CI. Start with the linter to catch issues at author time. What was searched, so you can tell an absence from a miss: the 15 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.

What to do

  • Enforce accessibility in the toolchain: add eslint-plugin-jsx-a11y, then assert with your test runner's axe binding (jest-axe, vitest-axe, cypress-axe or @axe-core/playwright) in tests, then gate axe/pa11y/Lighthouse in CI.
AX10 · Code composition9.4 / 10Exemplary✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

  • The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

C2 · Access Controls10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether access is authorized by default — a framework authorization attribute/decorator or policy, or imperative guard methods (throw-on-violation) called from handlers.

Method: Roslyn scan: [Authorize] usage and authorization policies, plus imperative throw-on-violation guard methods detected via syntax. Deterministic.

GD1 · Unfinished & placeholder code10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Unreviewed-generation residue in this repository's JavaScript/TypeScript: functions whose whole body still throws a "not implemented" error, and placeholder text (lorem ipsum, changeme/replace_me…) left in strings and JSX of non-test, non-generated code. Scored as a quality signature, never as a claim about authorship.

Method: Roslyn syntax scan: NotImplementedException throws and placeholder string literals in non-test, non-generated shipped code. Deterministic, code-shape signature.

IC1 · Incompleteness & stubs10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Unfinished work detected by code SHAPE, not keywords, in this repository's JavaScript/TypeScript: functions that only throw a "not implemented" error, functions that take inputs and return a constant or do nothing, async functions that never await, dead `if (false)` branches, and skeleton classes most of whose methods are holes.

Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.

M1 · Documentation (README)6.7 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
  • Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
  • No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
  • Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

What to do

  • Start a test surface where your build system looks for one (tests/, test/, spec/, or your ecosystem's test source set) — the separation follows from putting the first tests in the right place.
M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

  • No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

  • Add a CI workflow that builds and runs the test suite on every push/PR.
P2 · Observability0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

  • No logging call was found in the 32 JavaScript/TypeScript production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.

What to do

  • Adopt pino (or winston) and log at meaningful points in the services you run.
  • Consider OpenTelemetry tracing/metrics (@opentelemetry/sdk-node) and a health-check endpoint (@godaddy/terminus or a /health route) for operability.
P3 · Security & performance tooling3.0 / 10Weak✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

  • No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

What to do

  • Run what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

R1 · Type Safety10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.

Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.

R10 · Code Duplication9.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm over JS/TS tokens, D-386): a block is reported only where its copies still agree on most of their own identifiers and literals, or were renamed as they were pasted but kept most of their constants, and where the copies carry enough code to stand on their own or the copied extent reaches 30 lines — so a re-implementation sharing neither names nor values, and a small pasted declaration, are both found and deliberately not reported, and a clean R10 is not a claim that nothing was copied.

Method: Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm run over JS/TS tokens). Masking finds the candidates; a block is reported when its copies still agree on most of their own identifiers and literals, or when a renamed copy still agrees on most of its constants, AND the copies carry enough code to stand on their own — or when the copied extent reaches 30 lines. So a re-implementation sharing neither names nor values, and a small pasted declaration, are deliberately not counted. Deterministic.

  • src/app/login/page.tsx:4 · src/app/signup/page.tsx:4 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another. — src/app/login/page.tsx:4
  • src/app/login/actions.ts:9 · src/app/signup/actions.ts:8 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — src/app/login/actions.ts:9
  • src/app/dashboard/page.tsx:9 · src/app/dashboard/webhooks/[id]/page.tsx:18 — the two spans are one implementation copied and then locally edited — 59 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — src/app/dashboard/page.tsx:9
  • REDACTED:4 · REDACTED:4 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — REDACTED:4

What to do

  • Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R2 · Cyclomatic Complexity7.0 / 10Strong✓ Tool-verified

React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.

Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.

  • (top-level) has cyclomatic complexity 19 and cognitive complexity 18; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes. — src/utils/supabase/database.types.ts:1

What to do

  • Break down the listed branch-heavy functions; aim P95 cyclomatic ≤ 5.
R3 · Large Files10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How many source files exceed the large-file threshold.

Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.

R4 · Test Coverage0.0 / 10Critical✓ Tool-verified

React / JS · Readiness — Static test reachability (D-386): the share of production files reachable from any test via the import graph — measured without running anything.

Method: Static test reachability: the share of production files reachable from any test via the import graph — measured without running anything. Deterministic.

  • 0% of 31 production file(s) reachable from 0 test file(s) via the import graph — 'production' here is the RESIDUE: every source file left once tests, tooling, generated output, config, declarations and declaration-only modules, fixture corpora, type fixtures, behaviour-free data modules, re-export barrels, registration/constant data modules and service workers are set aside, so the percentage is taken over a smaller denominator than the workspace's file count

What to do

  • Add tests that import the unreached modules (directly or through their public entry).
R5 · Dependency Freshness9.1 / 10Exemplary✓ Tool-verified

React / JS · Readiness — How outdated the npm dependencies are (a maturity signal). JS/npm CVEs are scored separately in D30 (JS/npm Dependency Vulnerabilities).

Method: npm dependency staleness from manifest/registry metadata (a maturity signal; JS/npm CVEs are scored separately in D30, which answers dependency vulnerabilities for every ecosystem). Deterministic.

What to do

  • Bump outdated dependencies to current versions to limit upgrade debt.
R6 · Tooling3.3 / 10Weak✓ Tool-verified

React / JS · Readiness — Whether the project wires up test, lint and typecheck — detected from each package.json script's COMMAND (eslint / tsc / vitest / jest / playwright), not just its name, and corroborated against CI-workflow invocations so a tool run only in CI still counts.

Method: package.json scanned for test/lint/typecheck script wiring. Deterministic presence check.

  • test ✗ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.

What to do

  • Add a test runner (vitest / jest / playwright) and `tsc --noEmit` as package.json scripts and run them in CI.
R7 · Dead Code6.0 / 10Adequate✓ Tool-verified

React / JS · Code Health — Files unreachable from every application/tooling/test entry point, and exports nothing imports (module-graph reachability, D-386).

Method: Dead code: files unreachable from every application/tooling/test entry point plus exports nothing imports, via module-graph reachability. Deterministic, exhaustive over the import graph.

  • Unreachable from the 14 application, 3 tooling and 0 test entry point(s) detected in this repo. Gate removals on `npm run build` — an undetected custom entry would make these reachable.
  • no import path from any entry point (14 application, 3 tooling, 0 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make (×2) — src/utils/supabase/database.types.ts, src/utils/supabase/client.ts

What to do

  • Delete the dead files and unused exports — every line is maintenance cost and rebuild-estimate inflation with zero runtime value.
R8 · Dependency Hygiene7.5 / 10Strong✓ Tool-verified

React / JS · Readiness — npm dependency truthfulness (D-386): unused dependencies, imports not declared anywhere, and type-/test-only packages shipped as production deps.

Method: npm dependency truthfulness: unused dependencies, imports declared nowhere, and type-/test-only packages shipped as production deps — from the manifest + import graph. Deterministic.

  • Imported but not declared in any reachable package.json — installs work only by hoisting accident. — script/setup.ts:2
  • Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.

What to do

  • Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
R9 · Circular Imports10.0 / 10Exemplary✓ Tool-verified

React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.

Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.

X1 · Async correctness6.6 / 10Adequate✓ Tool-verified

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

  • `forEach` ignores what its callback returns, so the Promise each `async` call returns is dropped: nothing can await it, the code after this loop runs before any of the awaited work has finished (a function that `await`s around this loop still returns early), and a rejection is never handled — in Node.js an unhandled rejection terminates the process by default, and in a browser it is lost. Iterate with `for (const item of items) { await … }` when the work must run in order, or `await Promise.all(items.map(async (item) => { … }))` when it may run concurrently, so the enclosing function finishes only when the work does and its failures reach the caller. Where firing and forgetting is genuinely intended, make the callback's whole body a `try { … } catch (e) { … }` that handles the failure, so it cannot escape. — REDACTED:80

What to do

  • `async` callback passed to `forEach`
X12 · Unreachable branch10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.

Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.

X13 · Undrained process stream10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.

Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

X16 · Unfloored truncation loop10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.

Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.

X17 · Uncapped recursion over a caller-supplied document10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a walk that recurses through a JSON/XML tree handed in by its caller bounds how deep it will go — an uncapped walk lets the document's nesting choose the stack depth, and the resulting StackOverflowException cannot be caught.

Method: Roslyn syntax + semantics: methods that take a JSON/XML document node and call themselves with a child of it, reachable from an externally-callable member of the same type that accepts a document, checked for any depth parameter, descent counter or threaded arithmetic anywhere in the walk. On a repository with no .NET source it reads TypeScript off the engine’s own token stream (test, vendored, generated and minified paths and `.d.ts` not) with the same rule: a function or method with a parameter typed as a document value — `unknown`, `any`, `object`, `Record<string, unknown|any>`, a JSON alias (`JsonValue`, `JSONObject`, …) or a DOM node global the file does not rebind — that calls itself (bare, or through `this` for a method, or hands itself to a call over the value as in `value.map(walk)`) with something it took out of that value and never through an ancestor accessor such as `closest()` or `parentElement`, that is exported or reached from an exported function (a public method of the same exported class) taking such a value, and that names no depth, level, nesting, recursion, remaining or budget anywhere and threads no `+`/`-` arithmetic through a self-call. Plain JavaScript is not read: with no annotation nothing tells a parsed document from a tree the code built itself. Deterministic, provable per finding. Advisory.

X18 · Disposal-pattern correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.

Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.

X19 · Unrestored process-global state10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that temporarily changes state belonging to the whole process — the working directory, an environment variable — puts it back on EVERY path: a restore reached only when nothing throws leaks the change to the rest of the process.

Method: Roslyn syntax + semantics: method bodies that write the process working directory or an environment variable and write it back in the same body, checked for whether that restore sits in a `finally`/`catch` or only on the straight-line path. On a repository with no .NET source the same rule reads production JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not): `process.chdir`, `process.env.NAME =`/`["NAME"] =` and `delete process.env.NAME`, and Deno’s `Deno.chdir`/`Deno.env.set`/`Deno.env.delete`, paired per function body (a nested function or arrow is its own body, and module top-level code is none), where the last write puts back a local the body captured from the same global or deletes a variable the first write set, with at least one statement between them; a write in a `catch`/`finally` of that body silences it. Deterministic, provable per finding. Advisory.

X2 · Cancellation propagation4.0 / 10Weak✓ Tool-verified

Other · Code Health — Whether async functions that make a cancellable request accept or pass on an AbortSignal (adoption curve).

Method: Roslyn scan: every async method (excluding framework-fixed overrides/Blazor handlers) checked for CancellationToken parameter presence. Deterministic, adoption percentage. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same question: every named async function that itself makes a request an AbortSignal can cancel (global `fetch`, axios and its file-local instances, ky, ofetch) counts, and it is compliant when its parameters or body name a signal or it hands one of its own parameters to the request as options; signatures a framework fixes (JSX event handlers, route and lifecycle exports, request-first handlers, `override`, `'use server'` modules, TanStack `mutationFn`) are exempt unless they take a signal. Deterministic, adoption percentage.

  • Only 0/1 async functions that make a cancellable request (fetch, axios, ky, ofetch) accept an AbortSignal or pass one on, so a request keeps running after whatever wanted it has given up — a page navigated away from, an unmounted component, a timed-out job. Take a `signal` (or an options object that carries one) and hand it to the request; where nothing could ever cancel the call, omitting it is a deliberate choice — judge against how the function is used.
  • `publishWebhookEvent` awaits `fetch(…)` but neither accepts an AbortSignal nor passes one on, so its caller cannot stop the request once it has started. Accept `{ signal }` and pass it through: `fetch(url, { signal })`. — src/utils/hookdeck.ts:150

What to do

  • Thread an AbortSignal through async functions that make requests, so the work stops when its caller gives up.
X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X22 · Contradicted release guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that TAKES a lock or semaphore and gives it back from a flag-guarded `finally` returns the value that flag implies — reporting success while the guard hands the primitive back admits a second caller the exclusion was there to keep out, and reporting failure while the guard keeps it leaves nothing to ever give it back.

Method: Roslyn syntax: `try` statements whose `finally` releases a synchronisation primitive under a bare local-bool guard, where the method also TOOK that same primitive before the `try`, checked for a `return` of a bool literal whose value disagrees with the flag state the method's own straight-line assignments put it in. Deterministic, provable per finding. Advisory.

X23 · Unguarded diagnostic materialisation10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the work a diagnostic log line costs is paid only when that line is wanted — C# evaluates a call's arguments BEFORE the call, so a trace/debug message joined or projected out of a collection is built in full on every pass, and then discarded by a sink the shipped configuration leaves switched off.

Method: Roslyn syntax: log calls at a diagnostic level (a `Log`-prefixed method naming Trace/Debug/Verbose, or a bare `Debug`/`Trace`/`Verbose` on a receiver named for a logger), whose argument list is read for a call whose cost scales with a sequence — a LINQ operator, a materialisation, `string.Join`, a serializer — with no enclosing level check or conditional-compilation region. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `debug`/`trace`/`verbose` call on a receiver named for a logger, or a `log`-prefixed method naming the level, whose argument calls an array operator (`map`/`filter`/`reduce`/`sort`/…), `Array.from`, `Object.keys/values/entries`, `JSON.stringify`/`util.inspect` over anything but a literal, or an array `join` — outside any arrow or function passed as an argument, which the logger calls only when the level is on — with no enclosing `if`, `&&` or `?:` whose condition names a level, a level string, or the `NODE_ENV`/`__DEV__`/`DEV` build switch. Deterministic, provable per finding. Advisory.

X24 · Document value interpolated into markup unescaped10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether text read out of the document being converted is escaped before it is written into generated markup — a value the document's author chose, interpolated into an attribute the surrounding literal delimits, can close that attribute and open another.

Method: Roslyn semantic model over the whole compilation: a string-typed `Value`/`InnerText`/`InnerXml`/`Text` member declared inside `DocumentFormat.OpenXml` or `System.Xml` is a taint SOURCE, propagated through assignments, returns, arguments, tuple elements and string composition to its transitive closure, then read at interpolated-string holes that sit in a markup position the surrounding literal itself delimits. Escaper/encoder calls and enclosing validator conditions cut the flow. Flow- and container-insensitive by construction. A second arm needs no provenance at all and reports a type that CONTRADICTS ITSELF — the same expression escaped at one delimited markup hole and interpolated raw at another hole in the same markup position of the same type, which the type's own escaping proves is a defect without knowing where the value came from. On a repository with no .NET source it reads JavaScript/TypeScript off the token stream with the same rule: a DOM read of raw document text (`getAttribute`, `textContent`, `innerText`, `nodeValue`) is the source, propagated through local bindings and string composition, and judged at template-literal and concatenation holes in the same two delimited markup positions; escapers and validating conditions cut it, and documentation-site, test, vendored and minified scripts are not read. Deterministic, provable per finding. Advisory.

X25 · Inert configuration knob10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.

Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

X3 · Exception handling4.8 / 10Weak✓ Tool-verified

Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.

Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.

  • An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it. — src/utils/supabase/server.ts:20

What to do

  • Swallowed exception (empty catch)
X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

X5 · Nullable reference types7.0 / 10Strong✓ Tool-verified

Other · Code Health — Whether strict null checking is enabled and not undermined by heavy `!` assertion — TypeScript's `strictNullChecks` (which `strict` turns on) is what makes `string` exclude `null` and `undefined`, and the postfix `!` is the operator that silences it.

Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.

  • ~7.4 `!` null assertions per 1k TypeScript source lines — 14 assertion(s) across the 1886 source line(s) of the 31 TypeScript file(s) read, which is the only code the operator asserts anything in (a `!` in a `.js` file is not this operator and was not counted, and one in a file whose null checking is off silences nothing). Densest: script/setup.ts (4), src/utils/hookdeck.ts (2), src/utils/supabase/client.ts (2). Each one tells the compiler to trust the author about null, suppressing the very diagnostic `strictNullChecks` exists to produce.

What to do

  • The findings name the configuration each number was taken from and, for the assertions, the files that hold them. Turn null checking on where it is off — `"strict": true` in the base tsconfig that the others extend switches `strictNullChecks` on with the rest of the family — and then resolve the assertions rather than adding to them. A `!` on a value the checker could show to be null is a promise the author cannot check from where they are standing, and each one is a `TypeError: Cannot read properties of null` waiting for the path that makes it true; where the value genuinely cannot be null, say something the checker can see instead (narrow it with a test, make the property required, drop the `?`).

WCAG coverage — what static analysis assessed

Statically assessed 12 of 55 WCAG 2.2 Level A/AA success criteria (22%; ≈24% of the 50 WCAG 2.1 AA criteria for EN 301 549). The other 43 require runtime or manual evaluation. Partial signal only (a clean result is necessary, not sufficient; static analysis fully verifies none). This is accessibility readiness, not a conformance claim — a WCAG conformance claim requires manual evaluation (WCAG-EM 1.0).

DimensionWCAG 2.2 A/AA criteriaCoverage
AC2 · Forms & labels1.3.1, 3.3.2, 4.1.2Partial signal
AC3 · Page structure1.4.4, 2.2.1, 2.4.1, 2.4.2, 3.1.1, 4.1.2Partial signal
AC4 · Keyboard semantics2.1.1, 2.4.3Partial signal
AC6 · Visual & motion safety1.4.3, 2.4.7Partial — literal CSS only
AC7 · A11y enforcementenforcement — no page criterionEnforcement posture (process)

Not statically assessed — these 43 Level A/AA criteria need runtime or manual evaluation (WCAG-EM): 1.1.1, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.4.1, 1.4.2, 1.4.5, 1.4.10, 1.4.11, 1.4.12, 1.4.13, 2.1.2, 2.1.4, 2.2.2, 2.3.1, 2.4.4, 2.4.5, 2.4.6, 2.4.11, 2.5.1, 2.5.2, 2.5.3, 2.5.4, 2.5.7, 2.5.8, 3.1.2, 3.2.1, 3.2.2, 3.2.3, 3.2.4, 3.2.6, 3.3.1, 3.3.3, 3.3.4, 3.3.7, 3.3.8, 4.1.3.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health60%AdequateAcceptable, with room to improve.
Architecture98%ExemplarySolid.
Maturity40%Weak — gated by D34, M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness15%Critical — gated by D8, D9, R4, R6, P1, P2, P3Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security83%Adequate — gated by D30Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Accessibility47%Weak — gated by AC4Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Performance100%ExemplaryStrongest area.
Not evidenced — 6 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • C3 Audit Trail — Not assessed: this repository stores data through '@supabase/supabase-js' (REDACTED:1) but declares no persisted model this check reads (TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entities, Mongoose schemas, Sequelize or Drizzle tables, Knex migrations, Prisma models). Personal data may be written through raw SQL or a hosted backend, so whether its changes need an audit trail could not be established, and the trail's absence is not scored.
  • C4 Data Retention — Not assessed: this repository stores data through '@supabase/supabase-js' (REDACTED:1) but declares no persisted model this check reads (TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entities, Mongoose schemas, Sequelize or Drizzle tables, Knex migrations, Prisma models). Personal data may be written through raw SQL or a hosted backend, so whether a retention limit applies here could not be established, and its absence is not scored.
  • C5 Data-Subject Rights — Not assessed: this repository stores data through '@supabase/supabase-js' (REDACTED:1) but declares no persisted model this check reads (TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entities, Mongoose schemas, Sequelize or Drizzle tables, Knex migrations, Prisma models). Personal data may be written through raw SQL or a hosted backend, so whether data-subject rights apply here could not be established, and their absence is not scored.
  • P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
  • P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
Not included — 55 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — No image/media element found in the parsed markup — AC1 not applicable here.
  • AC5 ARIA correctness — No ARIA usage found in the parsed markup — AC5 not applicable here.
  • AX1 Captive dependencies — Not applicable: this repository's TypeScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
  • AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX6 Interface segregation — no exported interface declares behaviour
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — no test/production split to check
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXR1 Runtime accessibility — the dev server did not expose a crawlable HTTP endpoint in time — no runtime evidence This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
  • C1 Data Protection — Not assessed: this repository stores data through '@supabase/supabase-js' (REDACTED:1) but declares no persisted model this check reads (TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entities, Mongoose schemas, Sequelize or Drizzle tables, Knex migrations, Prisma models). Personal data may be written through raw SQL or a hosted backend, so the absence of a personal-data field here is not evidence that none is stored, and encryption at rest is not scored over a subject that could not be established.
  • D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
  • D11 Test Reliability — No test suite was found to re-run, so reliability couldn't be assessed. Two searches produced that zero and both came back empty: the classifier that reads the loaded workspace recognised no suite it could run, and a walk of the source on disk — which covers the JS/TS `*.test.*` and `*.spec.*` conventions and probes for a Pester suite — found no test source in any other ecosystem either. Neither search reaches a suite that is missing from the loaded workspace and carries no name either walk recognises, so this is 'no suite found by those two searches', not a verdict that the repository has none.
  • D16 Bus Factor — single-contributor repository — bus factor is not applicable
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D22 Internal API Consistency — No intentionally-exposed public API to evaluate for consistency.
  • D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — No inline comments to assess — comment value is not applicable here.
  • D25 ADR Conformance — no ADRs to check
  • D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.ts,.tsx), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
  • D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
  • D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
  • D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
  • D4 Code Duplication — This repository's production source (.ts, .tsx) is not read by D4's token comparison, which compares .NET source: duplication in it is measured by R10 Code Duplication, the frontend lens's card running the same clone algorithm over the JS/TS token stream. Not scored here — read the R10 card for this repository's duplication.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D5 Coupling — Not applicable — this npm build ships 1 production module(s), so there is no coupling BETWEEN modules to measure. (Its test and non-production modules are not part of the shipped graph.)
  • D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
  • ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
  • P12 CI test-gate honesty — no CI workflow found
  • P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
  • P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `vitest --coverage`, `jest --coverage`, `bun test --coverage --coverage-reporter=lcov`, or `nyc`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
  • PF2 Allocation hygiene — Not applicable: TypeScript/JavaScript runs on a garbage-collected runtime that gives a program no allocation-control idiom to choose on a hot path — no pools, stack allocation or value types — so allocation awareness is not something this code can be rated on.
  • R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
  • S1 Web-Security Posture — Not assessed: 31 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. That half of the dimension is clean, but it is not scored on its own: a C# repository with the same clean reading is scored on its server controls as well, or is N/A for having no web surface, and neither can be decided here. The server controls — HTTPS enforcement, HSTS, cookie flags, input validation — are NOT assessed for JavaScript/TypeScript: each is scored as an absence, an absence is only reportable over the production HTTP server, and in this ecosystem the file that opens the port is build output or a framework launcher rather than a file in the source tree. Their absence here is not a finding about this repository.
  • SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
  • X27 Collection changed while being enumerated — Not applicable: this check looks for a loop whose body adds to or removes from the very collection the loop is walking, invalidating the enumerator it holds, and in this repository's languages that cannot happen. JavaScript and TypeScript have no iterator that a change can invalidate: an `Array` is walked by index against its live length, and a `Map` or `Set` by the ECMAScript specification's live entry list, so a body that adds to, removes from or empties what it walks raises nothing — every loop form (`for…of`, `for…in`, `forEach`, `map`, `filter`, `reduce`, `entries()`) on every built-in collection (`Array`, `Map`, `Set`, plain objects, `URLSearchParams`, `Headers`, `FormData`) runs to completion. Such a loop can still skip an element or never end, which is a different defect and not the one this check asks about. Not a gap in the analyzer and not a finding about your code.
  • X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 27 finding(s)
D30 · Dependency Vulnerabilities · High CVE · ×14
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D30 · Dependency Vulnerabilities · Critical CVE · ×4
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
AC2 · Forms & labels · <input> without a programmatic label · ×2
  • <input> without a programmatic label src/app/components/dashboard/account-bar.tsx:29 — This control has no associated label. Add a <label htmlFor> / wrapping <label> / aria-label / aria-labelledby so assistive tech can name it.
  • <input> without a programmatic label src/app/components/dashboard/webhook-registrations-from.tsx:30 — This control has only a placeholder — a placeholder is not a label (it vanishes on input and many AT ignore it). Add a <label htmlFor>, a wrapping <label>, or aria-label.
AC2 · Forms & labels · <button> with no accessible text · ×1
  • <button> with no accessible text src/app/components/dashboard/webhook-delete-button.tsx:43 — A button with no text and no aria-label has no accessible name. Add visible text or an aria-label (an icon-only button still needs one).
AC4 · Keyboard semantics · Click handler on a non-interactive <tr> · ×1
  • Click handler on a non-interactive <tr> src/app/components/dashboard/events-table.tsx:92 — A click handler on a plain element isn't keyboard-operable. Use a <button>, or add role + tabIndex={0} + a key handler.
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D30 · Dependency Vulnerabilities · Critical vulnerability · ×1
  • REDACTED
D8 · Code Coverage · No automated tests · ×1
  • No automated tests — No automated tests — no test code was found in this repository. Untested code is the largest single risk to changing it safely. Start with the code you change most often: add a suite in a framework a runner can collect (Vitest, Jest, Mocha, or the runtime's built-in runner (`node --test`, `bun test`, `deno test`)), and run it in CI so the gap cannot reopen.
R8 · Dependency Hygiene · Unlisted import '@next/env' · ×1
  • Unlisted import '@next/env' script/setup.ts:2 — Imported but not declared in any reachable package.json — installs work only by hoisting accident.
Serious — 35 finding(s)
D30 · Dependency Vulnerabilities · Medium CVE · ×8
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D29 · Static Analysis (SAST) · REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D12 · Dependency Hygiene · Deprecated · ×3
  • Deprecated: @hookdeck/sdk package.json:14 — @hookdeck/sdk 0.3.1, declared in package.json, is marked deprecated by its publisher: "Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.". Replace it with the package or version that message names, or record why this one must stay.
  • Deprecated: next package.json:18 — next 14.2.15, declared in package.json, is marked deprecated by its publisher: "This version has a security vulnerability. Please upgrade to a patched version. See https://nextjs.org/blog/security-update-2025-12-11 for more details.". Replace it with the package or version that message names, or record why this one must stay.
  • Deprecated: eslint package.json:28 — eslint 9.17.0, declared in package.json, is marked deprecated by its publisher: "This version is no longer supported. Please see https://eslint.org/version-support for other options.". Replace it with the package or version that message names, or record why this one must stay.
AC7 · A11y enforcement · Accessibility enforcement below the top rung · ×1
  • Accessibility enforcement below the top rung — No accessibility enforcement found — no a11y linter (eslint-plugin-jsx-a11y) and no axe/pa11y/Lighthouse in tests or CI. Start with the linter to catch issues at author time. What was searched, so you can tell an absence from a miss: the 15 markup file(s) this pass actually assessed, the linter configuration checked in beside them, and this repository's test and CI files — matched by name against the accessibility checkers this dimension carries. An audit run outside the repository, a hosted scanner, or a check whose name is not one of those, is not seen here.
D1 · Cyclomatic Complexity · events-table.EventsTable (cyclomatic 20) · ×1
  • events-table.EventsTable (cyclomatic 20) src/app/components/dashboard/events-table.tsx:15 — events-table.EventsTable has cyclomatic complexity 20 (threshold 15). Of this number, 11 points are the body's own statements and 9 belong to 2 function items inside it that branch. To reduce it, name the conditions: bind each compound test to a well-named local or a small predicate function, so the body reads as a sequence of named decisions rather than a chain of operators.
D3 · God Classes · FunctionTooLong · ×1
  • FunctionTooLong: events-table.EventsTable src/app/components/dashboard/events-table.tsx:15 — FunctionTooLong — EventsTable runs 190 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 90 over it, 1.90× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
D30 · Dependency Vulnerabilities · Medium vulnerability · ×1
  • REDACTED
P1 · CI/CD gates · No CI pipeline · ×1
  • No CI pipeline — No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
P2 · Observability · No structured logging · ×1
  • No structured logging — No logging call was found in the 32 JavaScript/TypeScript production file(s) this check read across 1 module(s). Each was searched for its ecosystem's logging libraries (JavaScript/TypeScript: pino, winston, bunyan, log4js, loglevel, consola, the NestJS Logger) and for a call on a receiver named `log`/`logger` (or ending in `Logger`/`_logger`) with a level verb. It cannot see logging through a repo-local wrapper named otherwise, or in source it did not read — this is 'no logging found by this walk', not a verdict that nothing here logs. If it is right, production issues will be hard to diagnose.
R10 · Code Duplication · Duplicated block (33 lines × 2 locations) · ×1
  • Duplicated block (33 lines × 2 locations) src/app/login/page.tsx:4 — src/app/login/page.tsx:4 · src/app/signup/page.tsx:4 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another.
R10 · Code Duplication · Duplicated block (10 lines × 2 locations) · ×1
  • Duplicated block (10 lines × 2 locations) src/app/login/actions.ts:9 — src/app/login/actions.ts:9 · src/app/signup/actions.ts:8 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R10 · Code Duplication · Duplicated block with local edits (9 matched lines × 2 locations) · ×1
  • Duplicated block with local edits (9 matched lines × 2 locations) src/app/dashboard/page.tsx:9 — src/app/dashboard/page.tsx:9 · src/app/dashboard/webhooks/[id]/page.tsx:18 — the two spans are one implementation copied and then locally edited — 59 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication · Duplicated block (6 lines × 2 locations) · ×1
  • Duplicated block (6 lines × 2 locations) REDACTED:4 — REDACTED:4 · REDACTED:4 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R2 · Cyclomatic Complexity · Complex function (top-level) (cyclomatic 19, cognitive 18) · ×1
  • Complex function (top-level) (cyclomatic 19, cognitive 18) src/utils/supabase/database.types.ts:1 — (top-level) has cyclomatic complexity 19 and cognitive complexity 18; this row is raised above a cyclomatic bar of 10. The two numbers answer different questions and the gap between them is what decides whether to act: cyclomatic counts the independent arms through the body, cognitive counts what it costs to hold them in your head, so nesting and mixed boolean chains raise it while a flat run of independent arms does not. Cognitive sits below cyclomatic here, so much of the count is breadth — arms side by side rather than stacked — and splitting per arm would leave a function per arm; group the work between the checks into named steps instead. Measured by this repository's own parse of the file, so a body assembled at runtime, or generated, is counted as written rather than as it executes.
R4 · Test Coverage · Test Coverage · ×1
  • Test Coverage — 0% of 31 production file(s) reachable from 0 test file(s) via the import graph — 'production' here is the RESIDUE: every source file left once tests, tooling, generated output, config, declarations and declaration-only modules, fixture corpora, type fixtures, behaviour-free data modules, re-export barrels, registration/constant data modules and service workers are set aside, so the percentage is taken over a smaller denominator than the workspace's file count
R6 · Tooling · No test or typecheck script · ×1
  • No test or typecheck script — test ✗ · lint ✓ · typecheck ✗ — read from this repository's package.json scripts and corroborated against its CI workflows. A script counts when its name or command matches the step: `test` for the suite, `lint` or `prettier` for linting, `typecheck`/`type-check`/`tsc` for type checking. ✗ therefore means no script or CI step under those names was found, NOT that the step is absent from your pipeline — a task invoked by a runner this check does not read, or named something else entirely, is not seen and is worth confirming before acting on a cross. A ✓ means the wiring is DECLARED — a script or CI step under those names exists. It is not a statement that the step passes, or that it runs at all: nothing here installs a dependency or executes a suite.
R7 · Dead Code · Dead file (~193 LoC) · ×1
  • Dead file (~193 LoC) src/utils/supabase/database.types.ts — no import path from any entry point (14 application, 3 tooling, 0 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R7 · Dead Code · Dead file (~8 LoC) · ×1
  • Dead file (~8 LoC) src/utils/supabase/client.ts — no import path from any entry point (14 application, 3 tooling, 0 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R8 · Dependency Hygiene · Unused dependency 'supabase' · ×1
  • Unused dependency 'supabase' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
X1 · Async correctness · `async` callback passed to `forEach` · ×1
  • `async` callback passed to `forEach` REDACTED:80 — `forEach` ignores what its callback returns, so the Promise each `async` call returns is dropped: nothing can await it, the code after this loop runs before any of the awaited work has finished (a function that `await`s around this loop still returns early), and a rejection is never handled — in Node.js an unhandled rejection terminates the process by default, and in a browser it is lost. Iterate with `for (const item of items) { await … }` when the work must run in order, or `await Promise.all(items.map(async (item) => { … }))` when it may run concurrently, so the enclosing function finishes only when the work does and its failures reach the caller. Where firing and forgetting is genuinely intended, make the callback's whole body a `try { … } catch (e) { … }` that handles the failure, so it cannot escape.
X2 · Cancellation propagation · Async function without AbortSignal · ×1
  • Async function without AbortSignal: publishWebhookEvent src/utils/hookdeck.ts:150 — `publishWebhookEvent` awaits `fetch(…)` but neither accepts an AbortSignal nor passes one on, so its caller cannot stop the request once it has started. Accept `{ signal }` and pass it through: `fetch(url, { signal })`.
X3 · Exception handling · Swallowed exception (empty catch) · ×1
  • Swallowed exception (empty catch) src/utils/supabase/server.ts:20 — An empty catch block silently discards the error — failures vanish with no log and no rethrow. Log it, handle it, or don't catch it.
Minor — 21 finding(s)
D34 · Knowledge Freshness · Orphaned file · ×7
  • Orphaned file src/app/components/dashboard/events-table.tsx:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/utils/hookdeck.ts:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/utils/supabase/database.types.ts:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file REDACTED:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/app/dashboard/page.tsx:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file REDACTED:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
  • Orphaned file src/utils/supabase/middleware.ts:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
D12 · Dependency Hygiene · Deprecated · ×3
  • Deprecated: har-validator REDACTED:2992 — har-validator 5.1.5 is resolved in REDACTED and is marked deprecated by its publisher: "this library is no longer supported". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
  • Deprecated: request REDACTED:4688 — request 2.88.2 is resolved in REDACTED and is marked deprecated by its publisher: "request has been deprecated, see https://github.com/request/request/issues/3142". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
  • Deprecated: uuid REDACTED:5642 — uuid 3.4.0 is resolved in REDACTED and is marked deprecated by its publisher: "uuid@10 and below is no longer supported. For ESM codebases, update to uuid@latest. For CommonJS codebases, use uuid@11 (but be aware this version will likely be deprecated in 2028).". This repository does not declare it — a direct dependency pulls it in, so the move is to upgrade or replace that dependency.
D30 · Dependency Vulnerabilities · Low CVE · ×2
  • REDACTED
  • REDACTED
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.
D30 · Dependency Vulnerabilities · Low vulnerability · ×1
  • REDACTED
D34 · Knowledge Freshness · Orphaned files with no living knowledge · ×1
  • Orphaned files with no living knowledge — 7 of 7 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated and example/demo trees and test files identified by path convention, largest first; 7 of the 36 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: src/app/components/dashboard/events-table.tsx, src/utils/hookdeck.ts, src/utils/supabase/database.types.ts, REDACTED, src/app/dashboard/page.tsx, src/utils/supabase/middleware.ts, REDACTED. Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.
D9 · Test Distribution · No tests found · ×1
  • No tests found — No test suite could be collected — no discoverable tests to count. If this repository does test, wiring the suite to a framework a runner can collect (Vitest, Jest, Mocha, or the runtime's built-in runner (`node --test`, `bun test`, `deno test`)) is what makes it countable here; a pipeline step that invokes a runner is not evidence on its own, because a runner over an empty suite passes. Tests written as plain executables or shell/PowerShell harnesses are not collectible this way and are not scored here.
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation · No architecture diagram/doc · ×1
  • No architecture diagram/doc — No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
P3 · Security & performance tooling · No SAST · ×1
  • No SAST — No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
X2 · Cancellation propagation · Not all async functions that make a request accept an AbortSignal · ×1
  • Not all async functions that make a request accept an AbortSignal — Only 0/1 async functions that make a cancellable request (fetch, axios, ky, ofetch) accept an AbortSignal or pass one on, so a request keeps running after whatever wanted it has given up — a page navigated away from, an unmounted component, a timed-out job. Take a `signal` (or an options object that carries one) and hand it to the request; where nothing could ever cancel the call, omitting it is a deliberate choice — judge against how the function is used.
X5 · Nullable reference types · Null assertions (`!`) reduce the strict null checking score · ×1
  • Null assertions (`!`) reduce the strict null checking score — ~7.4 `!` null assertions per 1k TypeScript source lines — 14 assertion(s) across the 1886 source line(s) of the 31 TypeScript file(s) read, which is the only code the operator asserts anything in (a `!` in a `.js` file is not this operator and was not counted, and one in a file whose null checking is off silences nothing). Densest: script/setup.ts (4), src/utils/hookdeck.ts (2), src/utils/supabase/client.ts (2). Each one tells the compiler to trust the author about null, suppressing the very diagnostic `strictNullChecks` exists to produce.
Minor — 9 finding(s)
D12 · Dependency Hygiene · Outdated (npm) · ×9
  • Outdated (npm): @hookdeck/sdk — @hookdeck/sdk is pinned at 0.3.1; registry.npmjs.org publishes 0.4.0 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): @supabase/ssr — @supabase/ssr is pinned at 0.4.0; registry.npmjs.org publishes 0.12.7 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): @supabase/supabase-js — @supabase/supabase-js is pinned at 2.47.8; registry.npmjs.org publishes 2.118.0 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): dayjs — dayjs is pinned at 1.11.13; registry.npmjs.org publishes 1.11.23 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): next — next is pinned at 14.2.15; registry.npmjs.org publishes 16.4.2 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): react — react is pinned at 18.3.1; registry.npmjs.org publishes 19.3.1 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): react-dom — react-dom is pinned at 18.3.1; registry.npmjs.org publishes 19.3.1 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): react-icons — react-icons is pinned at 5.4.0; registry.npmjs.org publishes 5.7.0 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.
  • Outdated (npm): zod — zod is pinned at 3.23.8; registry.npmjs.org publishes 4.6.7 as the latest release. Upgrading is a judgement call — read that package's changelog for what changed between the two — but a direct production dependency several releases behind is where security and compatibility debt accumulates silently.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-7ebb9daffcd842938ad9ad82621d2ceb/history.json --exit-code 0 --source .0artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-7ebb9daffcd842938ad9ad82621d2ceb/tree.json --exit-code 0 --source .0artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .7artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update31artifacts/raw/trivy-fs.json
D31 · IaC & Container Securitytrivy—trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.0—
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.0—
D36 · Supply-chain Provenance & Signingprovenance—provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—
D43 · Malicious Dependenciestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update0artifacts/raw/trivy-fs.json

Run 01a16462-c442-7649-8863-5f11c8eeb34e · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 27 · Warnings: 35 · Recommendations: 21 · Info: 9 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 22-10-2026 @ 16:12 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md