Public report — A-Complete-Markdown-Blog-Solution, published 13 Aug 2026. Concrete security findings (CVE IDs, secret matches, dependency versions) are hidden in this version; ask the repo owner for the full report.
Watchdogby Canine Development 13-08-2026 @ 19:21 UTC Public
Code Health Audit

Jaiebobade/A-Complete-Markdown-Blog-Solution

no automated testssingle-maintainer
35% Weak
CriticalWeakAdequateStrongExemplary
middle
Security 100% Exemplary Architecture 69% Adequate Code Health 60% Adequate Maturity 43% Weak Readiness 10% Critical

Hobby · 630 LoC · weakest lens: Readiness (10%)

Grounded in facts. Every number here is computed, not narrated — reproducible, tool-backed, and traceable to a line of code. How to trust this ▸

21/23dimensions tool-verifieddeterministic · confidence 1.0 · 2 LLM-assisted, advisory
0findings with an exact file:lineof 9 — the remainder are repo-wide signals (a dimension-level measurement, not a single line); open any file:line and verify
23/113dimensions across the health lenses630 LoC — wide & deep

Executive summary

Read through the Production lens — the standard calibration. *Green* means good enough to run in production. The score is absolute and comparable across repos.

jaiebobade/A-Complete-Markdown-Blog-Solution carries serious gaps (35%). Several issues below can materially affect correctness, security, or the cost of changing it — and propagate to everything that depends on it.

It is strongest in Security (100%) — its security and compliance posture is in good shape.

The area that most needs attention is Readiness (10%) — releases are harder to depend on — versioning, release notes and dependency hygiene are thin, so consumers can't easily tell what changed or trust an upgrade. Maturity (43%) is the next concern — onboarding is slow — key decisions and the architecture aren't written down, so contributors have to reverse-engineer the intent.

Leadership focus, highest impact first: CI workflow that builds and runs the test suite on every push/PR (CI/CD gates); tests that import the unreached modules (directly or through… (Test Coverage); 1 No automated tests finding(s) in Code Coverage (Code Coverage).

For scale: Hobby (~630 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

It builds on a genuinely strong Security foundation (100%); the priorities above are the highest-leverage way to bring the rest up to that level.

Code Health 60% Adequate · gated by R1 Architecture 69% Adequate Maturity 43% Weak · gated by M2 Readiness 10% ⚠ Critical · gated by D8, D9, R4, P1, P3 Security 100% ★ Exemplary
How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.
Readiness 10% · 47% weightMaturity 43% · 26% weightCode Health 60% · 14% weightArchitecture 69% · 8% weightSecurity 100% · 4% weight

Raise Readiness 10 → 70 (the Healthy floor) ⇒ headline 35 → ~56.

New since the last scan (5+)

5 finding(s) are new versus the previous scan (2026-08-13) — surfaced by this scheduled scan itself, no pull request required.

  • R10 · Duplicated block (11 lines × 2 locations) dropdown-menu.jsx
  • R10 · Duplicated block (8 lines × 2 locations) dropdown-menu.jsx
  • R10 · Duplicated block (8 lines × 3 locations) table.jsx
  • R10 · Duplicated block (7 lines × 3 locations) dropdown-menu.jsx
  • R4 · Test Coverage

A full-fidelity diff against the previous run's complete recorded findings — line-move tolerant: a finding that only shifted line counts as unchanged, only genuinely new titles/files surface here.

Rebuild cost & value ~ Modeled — €180–€890
Cost to rebuild€180–€890 (0.1 person-years (3–9 h), ~1 engineer)
Domain complexityStandard — harder problems cost more per line
Quality factor0.7× (at 35% quality) — the last 20% of quality is most of the work
Size & shapeHobby · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.0) — standard service × a 0.7× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

1
Resolve the 1 No automated tests finding(s) in Code Coverage.
+20.0 pts · Low effort · Code Coverage
2
Resolve the 1 No tests found finding(s) in Test Distribution.
+20.0 pts · Low effort · Test Distribution
3
Add a CI workflow that builds and runs the test suite on every push/PR.
+23.6 pts · Medium effort · CI/CD gates

Diagnosis — what's actually going on

Highest-leverage move · Medium · Leverage
Of everything flagged, the best return on effort is: Add a CI workflow that builds and runs the test suite on every push/PR. The rest can wait behind it.
Evidence: priority ranking: top of 5 ranked by impact/effort
→ Add a CI workflow that builds and runs the test suite on every push/PR.

At a glance — Code Health · 60% · Adequate · gated by R1

The Good
D1 · .NET / C# Cyclomatic Complexity 10.0 D2 · .NET / C# Cognitive Complexity 10.0 R10 · React / TS Code Duplication 7.2 R2 · React / TS Cyclomatic Complexity 10.0 R3 · React / TS Large Files 10.0
The Ugly
R1 · React / TS Type Safety 0.0

At a glance — Architecture · 69% · Adequate

The Good
D35 · .NET / C# Change Coupling 10.0 R9 · React / TS Circular Imports 10.0

At a glance — Maturity · 43% · Weak · gated by M2

The Good
D15 · .NET / C# Churn × Complexity Hotspots 10.0 D21 · .NET / C# Naming Consistency 10.0
The Bad
D19 · .NET / C# Documentation Quality 6.0 M1 · Repo Documentation (README) 6.0 M3 · Repo Folder & project structure 6.0 M4 · Repo Documentation accuracy 5.3
The Ugly
M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 10% · Critical · gated by D8, D9, R4, P1, P3

The Good
D13 · .NET / C# Secret Scanning 10.0
The Ugly
D8 · .NET / C# Code Coverage 0.0 P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0 R4 · React / TS Test Coverage 0.0

At a glance — Security · 100% · Exemplary

The Good
D28 · .NET / C# Secrets (history) 10.0 D29 · .NET / C# Static Analysis (SAST) 10.0

Roadmap

First, establish a continuous integration pipeline to automatically build and test every code change. Next, expand test coverage by creating tests for all currently unreachable production modules. Then, address the specific gaps in automated testing and ensure all code paths are covered. Finally, document significant architectural decisions in a centralized location to preserve institutional knowledge.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 1 No automated tests finding(s) in Code Coverage.+20.0 ptsLowCode Coverage
Resolve the 1 No tests found finding(s) in Test Distribution.+20.0 ptsLowTest Distribution
Add a CI workflow that builds and runs the test suite on every push/PR.+23.6 ptsMediumCI/CD gates
Add tests that import the unreached modules (directly or through their public entry).+23.6 ptsMediumTest Coverage
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree, with each file named `NNNN-title` in whatever markup those docs already use, is the most discoverable form).+8.2 ptsMediumArchitecture documentation
Reconcile the README with reality: Next.js server-side rendering and performance claimed but no Next.js project present; Shadcn UI components claimed but no Shadcn package or component directory exists.+7.4 ptsMediumDocumentation accuracy
Add a build/run (quick start) section to the root README — the first thing a newcomer needs.+6.9 ptsMediumDocumentation (README)
Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root.+6.9 ptsMediumFolder & project structure

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 21 of 23 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 2 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.3 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 23 dimensions across the health lenses
D1D2D8D9D13D15D19D21D28D29D35M1M2M3M4P1P3R1R10R2R3R4R9

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 0 of 9 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
jscpdCode duplication—✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivySecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurementLocal LLM◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019ffc92-b82a-734d-9ea1-e6f268be2275.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D30 Dependency Vulnerabilities — scanner not present in this environment — The backing tool was not installed where this scan ran, so this dimension was not scored. Install the tool (or run in the hosted environment, where it is always present) for a graded result.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D8 Code Coverage: Coverage is measured by building and running the test suite inside Watchdog's isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
  • D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
  • D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement.
  • D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cyclomatic complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d1_recommendation.md.

D2 · Cognitive Complexity10.0 / 10Exemplary✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 method(s) exceeded the cognitive complexity threshold of 15.

✓ On the Gold path — maintain.

Detailed fixes: d2_recommendation.md.

D8 · Code Coverage0.0 / 10Critical✓ Tool-verified

What it measures: How much of the code is actually exercised by tests.

Method: Coverage from coverlet runs or committed reports (Cobertura/OpenCover/lcov), computed per-file with structured exclusions for generated, trivial, and glue code. When the suite can't be built/run in-image AND no report is committed, coverage is reported NOT-MEASURED (excluded from the score) with the precondition to make it measurable — never a LoC-ratio proxy folded in as if measured. Deterministic.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Verified

No automated tests — no test code was found in this repository.

No automated tests

What to do

  1. Resolve the 1 No automated tests finding(s) in Code Coverage. — One of this dimension's main actionable groups (1 issue-level).
  2. Stand up a CI pipeline, then gate Code Coverage in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d8_recommendation.md · top locations in Appendix A, every location in findings.md.

D9 · Test Distribution0.0 / 10Critical✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No test suite found.

No tests found

What to do

  1. Resolve the 1 No tests found finding(s) in Test Distribution. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d9_recommendation.md · top locations in Appendix A, every location in findings.md.

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

git history depth insufficient

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md · top locations in Appendix A, every location in findings.md.

D19 · Documentation Quality / 10Adequate◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Adequate / 10 · rule-coverage 100% · ceiling Documented

This single README is a well-written, focused blog project description covering the stack (Next.js + Shadcn + Tailwind + Remark/Rehype), rendering pipeline, and key features. It states what it does clearly but lacks architecture-level detail (e.g., how Markdown content is stored in files vs a database, where themes/light/dark mode live) and no configuration or deployment guidance.

What to do

  1. Improve Documentation Quality — currently 6.0/10. — This single README is a well-written, focused blog project description covering the stack (Next.js + Shadcn + Tailwind + Remark/Rehype), rendering pipeline, and key features. It states what it does clearly but lacks architecture-level detail (e.g., how Markdown content is stored in files vs a database, where themes/light/dark mode live) and no configuration or deployment guidance.

Detailed fixes: d19_recommendation.md.

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

D29 · Static Analysis (SAST)10.0 / 10Exemplary○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

semgrep found no security issues.

✓ On the Gold path — maintain.

Detailed fixes: d29_recommendation.md.

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

git history depth insufficient

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

M1 · Documentation (README)6.0 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

  • Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
  • Add a 'Testing' section to the root README — how to run the test suite.
  • Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
  • No C4/PlantUML/Mermaid diagram or architecture.md — the high-level shape isn't documented.

What to do

  • Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree, with each file named `NNNN-title` in whatever markup those docs already use, is the most discoverable form).
  • Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure6.0 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

  • Production code isn't grouped under a src/ folder — it's mixed at the repository root with everything else the repository holds, so nothing marks which files are the product.
  • No test surface was found — there are no tests here to separate from production code, so the folder question hasn't been reached yet.

What to do

  • Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root.
  • Start a test surface where your build system looks for one (tests/, test/, spec/, or your ecosystem's test source set) — the separation follows from putting the first tests in the right place.
M4 · Documentation accuracy5.3 / 10Adequate◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

  • Next.js server-side rendering and performance claimed but no Next.js project present
  • Shadcn UI components claimed but no Shadcn package or component directory exists

What to do

  • Reconcile the README with reality: Next.js server-side rendering and performance claimed but no Next.js project present; Shadcn UI components claimed but no Shadcn package or component directory exists.
P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

  • No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

  • Add a CI workflow that builds and runs the test suite on every push/PR.
P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

  • No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build.

What to do

  • Run what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
R1 · Type Safety0.0 / 10Critical✓ Tool-verified

React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.

Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.

  • 0 typed · 11 plain JS — the untyped files are Navbar.js, button.jsx, dropdown-menu.jsx, layout.js, onthispage.js, page.js (+5 more).

What to do

  • Adopt TypeScript for the frontend: add a typecheck step to the build, then either type-check the existing JavaScript in place (`checkJs`/JSDoc types) or convert the highest-traffic modules first — no file is typed today, so this is an adoption, not a clean-up.
R10 · Code Duplication7.2 / 10Strong✓ Tool-verified

React / JS · Code Health — Copy-pasted token-identical blocks across the frontend (the D4 clone algorithm over JS/TS tokens, D-386).

Method: Copy-pasted token-identical blocks across the frontend (the D4 clone algorithm run over JS/TS tokens). Deterministic.

  • dropdown-menu.jsx:87 · dropdown-menu.jsx:106 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — dropdown-menu.jsx:87
  • dropdown-menu.jsx:121 · sheet.jsx:85 — the 2 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it. — dropdown-menu.jsx:121
  • table.jsx:16 · table.jsx:32 · table.jsx:54 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. — table.jsx:16
  • dropdown-menu.jsx:64 · dropdown-menu.jsx:95 · dropdown-menu.jsx:114 — all 3 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — dropdown-menu.jsx:64

What to do

  • Extract the duplicated blocks into shared functions/components.
R2 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.

Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.

R3 · Large Files10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How many source files exceed the large-file threshold.

Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.

R4 · Test Coverage0.0 / 10Critical✓ Tool-verified

React / JS · Readiness — Static test reachability (D-386): the share of production files reachable from any test via the import graph — measured without running anything.

Method: Static test reachability: the share of production files reachable from any test via the import graph — measured without running anything. Deterministic.

  • 0% of 10 production file(s) reachable from 0 test file(s) via the import graph

What to do

  • Add tests that import the unreached modules (directly or through their public entry).
R9 · Circular Imports10.0 / 10Exemplary✓ Tool-verified

React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.

Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health60%Adequate — gated by R1Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Architecture69%AdequateAcceptable, with room to improve.
Maturity43%Weak — gated by M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness10%Critical — gated by D8, D9, R4, P1, P3Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security100%ExemplaryStrongest area.
Not included — 90 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC2 Forms & labels — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC3 Page structure — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC4 Keyboard semantics — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC5 ARIA correctness — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC6 Visual & motion safety — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AC7 A11y enforcement — Frontend below the scale floor (15 DOM element(s) < 25) — too little surface to assess accessibility.
  • AX1 Captive dependencies — no DI registrations detected
  • AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX2 Stateful singletons — no singleton implementations detected
  • AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • D10 Test Quality — No tests were found in the analyzed repository to assess for quality.
  • D11 Test Reliability — Test reliability not included
  • D12 Dependency Hygiene — Dependency hygiene not measured — no supported dependency manifest was read
  • D14 License Compliance — Not scored — this repository's package manifest is not parsed for licence data yet. A gap in the analyzer's language coverage, NOT a finding that the repository's licenses are compliant (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems)), which this pass does not parse yet — so this dimension asserts nothing about this repository's licensing in either direction.
  • D16 Bus Factor — single-maintainer — knowledge-concentration (bus factor) risk
  • D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
  • D22 Internal API Consistency — No exposed public API
  • D23 Boundary Type-Coupling — Zero projects and zero LoC mean the codebase is trivial and has no structure to justify boundaries.
  • D24 Comment Value — No inline comments to assess — comment value is not applicable here.
  • D25 ADR Conformance — no ADRs to check
  • D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
  • D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
  • D3 God Classes — God-class detection found no readable class surface — neither a C#/VB workspace nor a language-neutral code model — so class size could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository.
  • D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems) — not scanned yet) — where an OSV-supported manifest exists, dependency vulnerabilities for this repository are reported under D38 instead.
  • D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
  • D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
  • D33 JS/npm Dependency Vulnerabilities — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.
  • D34 Knowledge Freshness — too few commits to judge knowledge freshness
  • D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D38 OSV Dependency Vulnerabilities — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.
  • D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
  • D4 Code Duplication — No analyzable source was loaded, so code duplication was not measured (the solution failed to load, or the language model was unavailable).
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
  • D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this check looks for
  • ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
  • GD1 Unfinished & placeholder code — no source files
  • IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • P12 CI test-gate honesty — no CI workflow found
  • P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
  • P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
  • P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
  • P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
  • P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `vitest --coverage`, `jest --coverage`, `bun test --coverage --coverage-reporter=lcov`, or `nyc`) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
  • PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
  • R11 Import Boundaries — No recognizable feature-sliced/layered src layout — boundary rules not applicable.
  • R5 Dependency Freshness — no package-lock.json — dependency freshness not measured (would require an npm lockfile); JS/npm CVEs are scored in D33 (JS/npm Dependency Vulnerabilities)
  • R6 Tooling — no package.json in the repository — test/lint/typecheck wiring is read from package.json scripts (corroborated against CI), so this project's own toolchain isn't measured here
  • R7 Dead Code — Not measured — no application, tooling or test entry point was detected, so no file can be shown to be reachable or unreachable. Declare an entry (package.json main/module/exports, src/index.*, or an index.html script) to enable reachability.
  • R8 Dependency Hygiene — Not measured — no package.json declares any dependency, so there is nothing to check imports against (imports may resolve through a host runtime rather than node).
  • S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
  • X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X12 Unreachable branch — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X13 Undrained process stream — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X14 Bypassable address classification — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X15 Unvalidated length from an untrusted reader — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X16 Unfloored truncation loop — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X17 Uncapped recursion over a caller-supplied document — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X18 Disposal-pattern correctness — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X19 Unrestored process-global state — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
  • X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X9 Subsumed condition operand — Reported, not scored — this card publishes what it found rather than grading it. Its content is the findings and the key metric above.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Issue — 1 finding(s)
D8 · Code Coverage · No automated tests · ×1
  • No automated tests — No automated tests — no test code was found in this repository. Untested code is the largest single risk to changing it safely.
Warning — 8 finding(s)
D16 · Bus Factor · single-maintainer · ×1
  • single-maintainer — knowledge-concentration (bus factor) risk — single-maintainer — knowledge-concentration (bus factor) risk (1 author(s) across 4 commit(s) sampled).
P1 · CI/CD gates · No CI pipeline · ×1
  • No CI pipeline — No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
R1 · Type Safety · Type Safety · ×1
  • Type Safety — 0 typed · 11 plain JS — the untyped files are Navbar.js, button.jsx, dropdown-menu.jsx, layout.js, onthispage.js, page.js (+5 more).
R10 · Code Duplication · Duplicated block (11 lines × 2 locations) · ×1
  • Duplicated block (11 lines × 2 locations) dropdown-menu.jsx:87 — dropdown-menu.jsx:87 · dropdown-menu.jsx:106 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R10 · Code Duplication · Duplicated block (8 lines × 2 locations) · ×1
  • Duplicated block (8 lines × 2 locations) dropdown-menu.jsx:121 — dropdown-menu.jsx:121 · sheet.jsx:85 — the 2 copies sit in sibling files in one directory, so check first whether one of them (or an existing module there) already owns this behaviour and the others should call it; otherwise extract it into one module in that directory and have each site call it.
R10 · Code Duplication · Duplicated block (8 lines × 3 locations) · ×1
  • Duplicated block (8 lines × 3 locations) table.jsx:16 — table.jsx:16 · table.jsx:32 · table.jsx:54 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
R10 · Code Duplication · Duplicated block (7 lines × 3 locations) · ×1
  • Duplicated block (7 lines × 3 locations) dropdown-menu.jsx:64 — dropdown-menu.jsx:64 · dropdown-menu.jsx:95 · dropdown-menu.jsx:114 — all 3 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R4 · Test Coverage · Test Coverage · ×1
  • Test Coverage — 0% of 10 production file(s) reachable from 0 test file(s) via the import graph
Recommendation — 10 finding(s)
M4 · Documentation accuracy · README/code drift · ×2
  • README/code drift — Next.js server-side rendering and performance claimed but no Next.js project present
  • README/code drift — Shadcn UI components claimed but no Shadcn package or component directory exists
D11 · Test Reliability · Test reliability not included · ×1
  • Test reliability not included — No test suite was found, so reliability couldn't be assessed.
D34 · Knowledge Freshness · too few commits to judge knowledge freshness · ×1
  • too few commits to judge knowledge freshness — too few commits to judge knowledge freshness (4 commit(s) sampled).
D9 · Test Distribution · No tests found · ×1
  • No tests found — No test suite could be collected — nothing here references a test framework (Vitest, Jest, Mocha, or the runtime's built-in runner (`node --test`, `bun test`, `deno test`)), so there were no discoverable tests to count. Tests written as plain executables or shell/PowerShell harnesses are not collectible this way and are not scored here.
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
M2 · Architecture documentation · No architecture diagram/doc · ×1
  • No architecture diagram/doc — No C4/PlantUML/Mermaid diagram or architecture.md — the high-level shape isn't documented.
M3 · Folder & project structure · No src/ separation · ×1
  • No src/ separation — Production code isn't grouped under a src/ folder — it's mixed at the repository root with everything else the repository holds, so nothing marks which files are the product.
M3 · Folder & project structure · No tests/ separation · ×1
  • No tests/ separation — No test surface was found — there are no tests here to separate from production code, so the folder question hasn't been reached yet.
P3 · Security & performance tooling · No SAST · ×1
  • No SAST — No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/javascript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build.
Info — 4 finding(s)
D12 · Dependency Hygiene · Dependency hygiene not measured · ×1
  • Dependency hygiene not measured — no supported dependency manifest was read — No dependency manifest this pass reads for hygiene (a Python pyproject.toml/requirements.txt (pip/uv/Poetry), a Swift Package.swift/Package.resolved, a Cargo manifest, a Go module (go.mod/go.sum), a Gradle version catalogue, a Maven POM, an sbt build (build.sbt), composer.json, package.json, a Dart pubspec.yaml, a rebar.config / erlang.mk DEPS (Hex), a Ruby Gemfile/Gemfile.lock or .gemspec (Bundler/RubyGems)) was found in this repository, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D38 wherever the manifest is OSV-readable.
D15 · Churn × Complexity Hotspots · git history depth insufficient · ×1
  • git history depth insufficient — git history depth insufficient — this repository has 4 commit(s), too few for a reliable trend signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.
D22 · Internal API Consistency · No exposed public API · ×1
  • No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.
D35 · Change Coupling · git history depth insufficient · ×1
  • git history depth insufficient — git history depth insufficient — this repository has 4 commit(s), too few for a reliable change-coupling signal. The clone is complete, so there is no deeper history to fetch: the signal returns as the project accumulates history.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .0artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 0 --metrics off .0artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesnone (no readable dependency manifest)—none (no readable dependency manifest): not present in this environment0—
D31 · IaC & Container Securitytrivy—trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.0—
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.0—
D33 · JS/npm Dependency Vulnerabilitiestrivy—trivy: not applicable — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.0—
D36 · Supply-chain Provenance & Signingprovenance—provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D38 · OSV Dependency Vulnerabilitiesosv-scanner—osv-scanner: not applicable — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—

Run 019ffc92-b82a-734d-9ea1-e6f268be2275 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 1 · Warnings: 8 · Recommendations: 10 · Info: 4 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 13-08-2026 @ 19:21 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md