Executive summary
The system holds an adequate overall standing of 60%, reflecting a codebase that is technically sound but operationally fragile. While the underlying logic is clean and secure, the organization lacks the institutional knowledge to sustain it, creating a significant risk that delays future changes or onboarding new engineers. This is a small asset, comprising roughly 7,000 lines of production code, with a rebuild cost of approximately €10,000. Because the effort to replace it is minimal, the primary business exposure is not the code itself, but the loss of context that makes maintaining it harder than necessary.
The most critical theme is knowledge erosion. With a maturity score of 48%, the system suffers from dormant practices and orphaned files, meaning new team members cannot easily understand how the software works. This lack of documentation and decision history increases the cost of every change, as engineers must reverse-engineer intent rather than following clear guidelines. The risk here is not immediate failure, but slowdowns and defects caused by misunderstandings, which accumulate over time and erode delivery speed.
A secondary theme is operational visibility. Although the code health and architecture are strong at 90% and 89% respectively, production readiness sits at a concerning 53%. The build pipeline lacks integrity checks and dependency monitoring, leaving the system vulnerable to supply-chain issues. While no active security threats were confirmed, the absence of provenance tracking means defects in third-party tools could go unnoticed, potentially compromising reliability and security during updates.
Genuinely good news is that the core code is well-structured, with no boilerplate or straight-line logic, and high security standards. The architecture is robust, and the code is easy to read. This strong foundation means that fixing the knowledge gaps will yield immediate benefits without requiring major refactoring.
Focus first on capturing significant decisions. Creating a simple, dated record of key design choices will immediately improve onboarding and reduce ambiguity. This low-effort action provides the highest leverage, stabilizing the team’s ability to work effectively. Once this context is established, address the orphaned files and build pipeline gaps to further reduce operational risk.
Raise Maturity 48 → 70 (the Healthy floor) ⇒ headline 60 → ~67.
New since the last scan (46+)
- D1 · ISOParser.parse (cyclomatic 43) Sources/SwiftDate/Formatters/ISOParser.swift
- D1 · Options.dateFormat (cyclomatic 38) Sources/SwiftDate/Formatters/ISOFormatter.swift
- D1 · DateInRegion.compare (cyclomatic 35) Sources/SwiftDate/DateInRegion/DateInRegion.swift
- D1 · TimePeriodProtocol.relation (cyclomatic 28) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift
- D1 · ISOParser.parse_digits_2 (cyclomatic 25) Sources/SwiftDate/Formatters/ISOParser.swift
- D1 · ISOParser.parse_digits_4 (cyclomatic 17) Sources/SwiftDate/Formatters/ISOParser.swift
- D2 · ISOParser.parse (cognitive 83) Sources/SwiftDate/Formatters/ISOParser.swift
- D2 · Options.dateFormat (cognitive 76) Sources/SwiftDate/Formatters/ISOFormatter.swift
- D2 · ISOParser.parse_digits_2 (cognitive 54) Sources/SwiftDate/Formatters/ISOParser.swift
- D2 · ISOParser.parse_digits_4 (cognitive 28) Sources/SwiftDate/Formatters/ISOParser.swift
- D2 · TimePeriodProtocol.relation (cognitive 27) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift
- D3 · MethodTooLong: Int.days Sources/SwiftDate/Formatters/ISOParser.swift
- D3 · MethodTooLong: Int.weeks Sources/SwiftDate/Formatters/ISOParser.swift
- D3 · TooManyMethods: DateInRegion Sources/SwiftDate/DateInRegion/DateInRegion.swift
- D3 · ClassTooLong: Locales Sources/SwiftDate/Supports/Locales.swift
- D3 · FileTooLong: Supports/Locales.swift Sources/SwiftDate/Supports/Locales.swift
- D3 · TooManyMethods: Date Sources/SwiftDate/Date/Date+Compare.swift
- D3 · ClassTooLong: ISOParser Sources/SwiftDate/Formatters/ISOParser.swift
- D3 · MethodTooLong: ISOParser.parse Sources/SwiftDate/Formatters/ISOParser.swift
- D3 · ClassTooLong: Zones Sources/SwiftDate/Supports/Zones.swift
- D3 · FileTooLong: Formatters/ISOParser.swift Sources/SwiftDate/Formatters/ISOParser.swift
- D4 · Duplicated block (13 lines × 2) Sources/SwiftDate/TimePeriod/Groups/TimePeriodChain.swift
- D4 · Duplicated block (11 lines × 2) Sources/SwiftDate/TimePeriod/Groups/TimePeriodGroup.swift
- D4 · Duplicated block (10 lines × 2) Sources/SwiftDate/Date/Date.swift
- D4 · Duplicated block (9 lines × 2) Sources/SwiftDate/DateRepresentable.swift
- D4 · Duplicated block (9 lines × 2) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift
- D4 · Duplicated block (7 lines × 2) Sources/SwiftDate/Date/Date+Create.swift
- D4 · Duplicated block (5 lines × 2) Sources/SwiftDate/Date/Date+Create.swift
- D6 · Low cohesion: Date (LCOM4 13) Sources/SwiftDate/Date/Date+Compare.swift
- D6 · Low cohesion: String (LCOM4 7) Sources/SwiftDate/Foundation+Extras/String+Parser.swift
- D6 · Low cohesion: DateComponents (LCOM4 5) Sources/SwiftDate/Foundation+Extras/DateComponents+Extras.swift
- D8 · Coverage not measured — Swift suite
- D10 · No assertions: testDifferencesBetweenDates Tests/SwiftDateTests/TestDate.swift
- D10 · No assertions: testDifferenceBetweenDates Tests/SwiftDateTests/TestDate.swift
- D10 · No assertions: testDateInRegion_EnumerateDates Tests/SwiftDateTests/TestDateInRegion+Create.swift
- D10 · Assertions commented out: testDateInRegion_Hash Tests/SwiftDateTests/TestDateInRegion.swift
- D10 · No assertions: testDateInRegion_InitStringAutoFormat Tests/SwiftDateTests/TestDateInRegion.swift
- D10 · No assertions: testDotNETFormatter Tests/SwiftDateTests/TestFormatters.swift
- D10 · No assertions: testRSSFormatter Tests/SwiftDateTests/TestFormatters.swift
- D10 · No assertions: testRSSAltFormatter Tests/SwiftDateTests/TestFormatters.swift
- D10 · No assertions: testSQLFormatter Tests/SwiftDateTests/TestFormatters.swift
- D10 · No assertions: testISOFormatter Tests/SwiftDateTests/TestFormatters.swift
- D10 · No assertions: test Tests/SwiftDateTests/TestRegion.swift
- D22 · Duplicate functionality across types. `SwiftDate` (likely a namespace or singleton type) and `DateFormats` both expose a `resetAutoFormats` method. Since `DateFormats` also holds the `autoFormats` property, the method on `SwiftDate` is redundant or implies a global state that should be encapsulated within `DateFormats`.
- D22 · Inconsistent parsing API surface. `DateInRegion` constructors handle single and multiple format strings directly. However, `DateFormats` exposes separate `parse` overloads for single vs. multiple formats, and returns a standard `Date?` instead of `DateInRegion?`, forcing the caller to handle region conversion separately or lose region context. This creates two different patterns for the same logical operation (parsing a string to a date with region awareness).
- D22 · Redundant methods on wrapper types. `Date` is a thin wrapper around `DateInRegion` (or vice versa, depending on internal implementation, but they share identical signatures for `past` and `future`). Having these methods on both types creates confusion about which type to use for simple time travel operations, especially since they return different types (`Date` vs `DateInRegion`), requiring implicit/explicit conversion.
Rebuild cost & value ~ Modeled — €3,300–€17,000
| Cost to rebuild | €3,300–€17,000 |
|---|---|
| Domain complexity | Standard |
| Quality factor | 0.8× (at 60% quality) |
| Size & shape | Small · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk) |
This codebase represents roughly ~0.1 person-years of build effort (about ~€10,000 to rebuild). Its weakest lens is Maturity at 48% — the part of that asset most exposed by the findings below.
Top priorities
Diagnosis — what's actually going on
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Roadmap
Begin by documenting key architectural decisions in a dedicated, discoverable location and add a quick-start build guide to the root README to help newcomers. Next, resolve the most significant orphaned files to ensure knowledge freshness and maintain a changelog to track release history. Finally, address the lack of existing architectural decision records to complete the documentation foundation.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 3 Most significant orphaned file finding(s) in Knowledge Freshness — start with DateInRegion+Create.swift, ISOParser.swift, Locales.swift. | +10.8 pts | Low | Knowledge Freshness |
| Resolve the 1 No ADRs found finding(s) in ADR Quality. | +9.7 pts | Low | ADR Quality |
| Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree, with each file named `NNNN-title` in whatever markup those docs already use, is the most discoverable form). | +12.4 pts | Medium | Architecture documentation |
| Add a build/run (quick start) section to the root README — the first thing a newcomer needs. | +11.5 pts | Medium | Documentation (README) |
| Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release. | +10.1 pts | Medium | Release Hygiene |
| Resolve the 1 Dormant codebase finding(s) in Knowledge Freshness. | +4.3 pts | Low | Knowledge Freshness |
| Resolve the 1 Assertions commented out finding(s) in Test Quality — start with TestDateInRegion.swift. | +2.6 pts | Low | Test Quality |
| Improve Documentation Quality — currently 6.0/10. | +4.5 pts | Medium | Documentation Quality |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| Tests/SwiftDateTests/TestDateInRegion.swift | 6.5 | Mixed | Test Quality: Assertions commented out: testDateInRegion_Hash |
| Sources/SwiftDate/Formatters/ISOParser.swift | 7.0 | Mixed | Cyclomatic Complexity: ISOParser.parse (cyclomatic 43) |
| Sources/SwiftDate/Date/Date+Compare.swift | 7.0 | Mixed | God Classes: TooManyMethods: Date |
| Tests/SwiftDateTests/TestFormatters.swift | 7.1 | Mixed | Test Quality: No assertions: testDotNETFormatter |
| Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift | 7.4 | Mixed | Cyclomatic Complexity: TimePeriodProtocol.relation (cyclomatic 28) |
| Sources/SwiftDate/Formatters/ISOFormatter.swift | 7.8 | Mixed | Cyclomatic Complexity: Options.dateFormat (cyclomatic 38) |
| Sources/SwiftDate/DateInRegion/DateInRegion.swift | 7.8 | Mixed | Cyclomatic Complexity: DateInRegion.compare (cyclomatic 35) |
| Sources/SwiftDate/Supports/Locales.swift | 7.8 | Mixed | God Classes: ClassTooLong: Locales |
| Sources/SwiftDate/Date/Date+Create.swift | 7.8 | Mixed | Code Duplication: Duplicated block (7 lines × 2) |
| Tests/SwiftDateTests/TestDate.swift | 7.8 | Mixed | Test Quality: No assertions: testDifferencesBetweenDates |
| Sources/SwiftDate/Supports/Zones.swift | 8.5 | Near-clean | God Classes: ClassTooLong: Zones |
| Sources/SwiftDate/TimePeriod/Groups/TimePeriodChain.swift | 8.5 | Near-clean | Code Duplication: Duplicated block (13 lines × 2) |
| Sources/SwiftDate/TimePeriod/Groups/TimePeriodGroup.swift | 8.5 | Near-clean | Code Duplication: Duplicated block (11 lines × 2) |
| Sources/SwiftDate/Date/Date.swift | 8.5 | Near-clean | Code Duplication: Duplicated block (10 lines × 2) |
| Sources/SwiftDate/DateRepresentable.swift | 8.5 | Near-clean | Code Duplication: Duplicated block (9 lines × 2) |
| Sources/SwiftDate/Foundation+Extras/String+Parser.swift | 8.5 | Near-clean | Cohesion (LCOM4): Low cohesion: String (LCOM4 7) |
| Sources/SwiftDate/Foundation+Extras/DateComponents+Extras.swift | 8.5 | Near-clean | Cohesion (LCOM4): Low cohesion: DateComponents (LCOM4 5) |
| Tests/SwiftDateTests/TestDateInRegion+Create.swift | 8.5 | Near-clean | Test Quality: No assertions: testDateInRegion_EnumerateDates |
| Tests/SwiftDateTests/TestRegion.swift | 8.5 | Near-clean | Test Quality: No assertions: test |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 24 of 28 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 4 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 28 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 45 of 56 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | Local LLM | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.swift) and this repository declares a SwiftPM test suite (SwiftDate), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D12 Dependency Hygiene — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — 0 SwiftPM declaration(s) across 1 `Package.swift` and 0 committed pin(s) were read for PINNING discipline (0 defect(s) reported), but the outdated signal comes from listing each declared repository's release tags rather than from a registry, and none of them resolved to a version to compare, so this dimension's own question is only partly answered. NOT a finding that these dependencies are current or healthy.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. All 27 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness). Counted over 15 of the 34 production source files in this repository: 7 are under the ~2,400-byte size floor this dimension measures over, and the remaining 12 have no attributable history left to measure.
- D44 Platform End-of-Life — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (go.mod, a Gemfile's ruby directive, a Dockerfile) is simply not read here yet.
- AX3 Project dependency cycles — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over which project references which. That is a language-neutral question, but the project-reference graph is collected from MSBuild .csproj, Gradle and Maven builds only, and this repository commits none — so there was no graph to read, and re-running the same commit reads the same nothing. Its modules are declared as: SwiftPM targets (Package.swift). A reader for that graph is the collector this check is missing. That is a COLLECTOR gap in this analyzer — no change to the scan image closes it — and not a finding that the repository is free of what this check looks for.
- AX4 Dependency direction — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the direction each project reference points. That is a language-neutral question, but the project-reference graph is collected from MSBuild .csproj, Gradle and Maven builds only, and this repository commits none — so there was no graph to read, and re-running the same commit reads the same nothing. Its modules are declared as: SwiftPM targets (Package.swift). A reader for that graph is the collector this check is missing. That is a COLLECTOR gap in this analyzer — no change to the scan image closes it — and not a finding that the repository is free of what this check looks for.
- AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AX8 Test isolation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over which projects are test projects, and what they reference. That is a language-neutral question, but the project-reference graph is collected from MSBuild .csproj, Gradle and Maven builds only, and this repository commits none — so there was no graph to read, and re-running the same commit reads the same nothing. Its modules are declared as: SwiftPM targets (Package.swift). A reader for that graph is the collector this check is missing. That is a COLLECTOR gap in this analyzer — no change to the scan image closes it — and not a finding that the repository is free of what this check looks for.
- AXB1 Runtime evidence locked — no reproducible boot — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. The Runtime Evidence tier boots an app only via docker-compose, an Aspire AppHost, or a Dockerfile. None was found, so no live runtime a11y/egress/header evidence was collected. You can widen what we reach: add a docker-compose.yml (or an Aspire AppHost) that brings the app up with its dependencies. Watchdog then boots it in an isolated sandbox and gathers real runtime evidence — you change nothing in your pipeline (no CI step, no SDK).
- C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- ED5 Idempotency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check finds retry-prone mutations by walking the repository's declared types, and NONE was loaded on this run, so it had nothing to look at. That is a limit of the analyzer's reach — it reads .NET projects — not a finding that this repository has no command handlers or message consumers.
- GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X1 Async correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X14 Bypassable address classification — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X15 Unvalidated length from an untrusted reader — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X2 Cancellation propagation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X20 Mistyped argument guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X21 Side-effecting pattern guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X22 Contradicted release guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X23 Unguarded diagnostic materialisation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X25 Inert configuration knob — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X26 Unsynchronised callback handoff — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X27 Collection changed while being enumerated — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X28 Index access outside its own emptiness guard — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X29 Per-element action decided by a fixed element — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X3 Exception handling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X30 Support guard that admits what it rejects — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X32 Type resolved by simple name across every loaded assembly — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X5 Nullable reference types — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
- D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
- D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
- D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
- D22 Internal API Consistency: API-surface coherence is an LLM judgement over a sample of the public surface — consistency of intent across the whole API is approximated, not exhaustively verified.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- AX9 CQS / query purity: Handlers are found by interface/name convention — a query handler using neither is not seen. Mutation is a resolved write/publish invocation (SaveChanges/repository/bus), so a write hidden behind a hand-rolled wrapper, reflection, or a string-keyed service locator resolves to a non-persistence type and isn't flagged; it detects that a query writes state, not whether the write is a legitimate read-side cache update. Clean means "no resolved write/publish in a query body", not a proof of CQS purity.
- M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
The LLM boundary
Dimensions
D1 · Cyclomatic Complexity
6 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was ISOParser.parse at 43. A further 6 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being DateInRegion.dateAt at 25 — they are counted neither in the figure above nor in this dimension's score. 3 files carry no cyclomatic complexity row at all for this reason — every one of their over-threshold methods was excluded, so the exclusion is disclosed nowhere in the file itself: Sources/SwiftDate/Supports/Calendars.swift (Identifier.init at 18), Sources/SwiftDate/Foundation+Extras/DateComponents+Extras.swift (Component.nsCalendarUnit at 17), Sources/SwiftDate/Date/Date+Compare.swift (Date.getValue at 16). They are named here because the per-file figures other dimensions report are taken BEFORE this exclusion, so such a file can show a high maximum complexity elsewhere in this report and nothing here, with nothing to reconcile the two.
What to do
- Resolve the 1 ISOParser.parse (cyclomatic 43) finding(s) in Cyclomatic Complexity — start with ISOParser.swift. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Options.dateFormat (cyclomatic 38) finding(s) in Cyclomatic Complexity — start with ISOFormatter.swift. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 DateInRegion.compare (cyclomatic 35) finding(s) in Cyclomatic Complexity — start with DateInRegion.swift. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Cyclomatic Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D2 · Cognitive Complexity
5 method(s) exceeded the cognitive complexity threshold of 15; the worst was ISOParser.parse at 83.
What to do
- Resolve the 1 ISOParser.parse (cognitive 83) finding(s) in Cognitive Complexity — start with ISOParser.swift. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Options.dateFormat (cognitive 76) finding(s) in Cognitive Complexity — start with ISOFormatter.swift. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 ISOParser.parse_digits_2 (cognitive 54) finding(s) in Cognitive Complexity — start with ISOParser.swift. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D3 · God Classes
10 god class(es) detected.
What to do
- Resolve the 3 MethodTooLong finding(s) in God Classes — start with ISOParser.swift (3). — One of this dimension's main actionable groups (3 warning-level).
- Resolve the 3 ClassTooLong finding(s) in God Classes — start with Locales.swift, ISOParser.swift, Zones.swift. — One of this dimension's main actionable groups (3 warning-level).
- Resolve the 2 TooManyMethods finding(s) in God Classes — start with DateInRegion.swift, Date+Compare.swift. — One of this dimension's main actionable groups (2 warning-level).
- Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D4 · Code Duplication
7 duplicated block group(s) detected.
What to do
- Resolve the 2 Duplicated block (9 lines × 2) finding(s) in Code Duplication — start with DateRepresentable.swift, TimePeriodProtocol.swift. — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Duplicated block (13 lines × 2) finding(s) in Code Duplication — start with TimePeriodChain.swift. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (11 lines × 2) finding(s) in Code Duplication — start with TimePeriodGroup.swift. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D6 · Cohesion (LCOM4)
3 of 7 classes have LCOM4 above 3.
What to do
- Resolve the 3 Low cohesion finding(s) in Cohesion (LCOM4) — start with Date+Compare.swift, String+Parser.swift, DateComponents+Extras.swift. — One of this dimension's main actionable groups (3 warning-level).
- Enforce Cohesion (LCOM4) in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D9 · Test Distribution
69 test methods: 69 unit, 0 integration, 0 BDD, 0 e2e.
D10 · Test Quality
0 skipped, 11 zero-assertion, no mocking-framework packages referenced (hand-written doubles or no mocking) across 69 tests.
What to do
- Resolve the 10 No assertions finding(s) in Test Quality — start with TestFormatters.swift (5), TestDate.swift (2), TestDateInRegion+Create.swift. — One of this dimension's main actionable groups (10 warning-level).
- Resolve the 1 Assertions commented out finding(s) in Test Quality — start with TestDateInRegion.swift. — One of this dimension's main actionable groups (1 issue-level).
- Enforce Test Quality in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 0 third-party package(s) use a banned license. This repository's 1 SwiftPM file(s) declare no third-party dependencies and no committed resolution pins any, so there is no third-party package licence to grade — a complete answer, not a gap in coverage. It also commits no CocoaPods or Carthage manifest, so SwiftPM is the only package manager it takes dependencies through. This repository's OWN licence is its own choice and is not judged here.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
0 deducted task-comment markers across 6967 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
D19 · Documentation Quality
The repository's single README is a well-written marketing document that describes SwiftDate as the definitive toolchain for parsing, validating, manipulating, comparing, and displaying dates/timezones on Apple platforms and Linux frameworks like Vapor/Kitura. It opens with an impressive banner image, a bulleted list of features (easy date parsing, 140+ languages, codable support), and a strong 'IT'S TESTED!' section plus links to full documentation and playgrounds. The document is rich in content but lacks the standard elements for a tool README: no installation/build instructions, no usage examples, and no contribution guidance.
What to do
- Improve Documentation Quality — currently 6.0/10. — The repository's single README is a well-written marketing document that describes SwiftDate as the definitive toolchain for parsing, validating, manipulating, comparing, and displaying dates/timezones on Apple platforms and Linux frameworks like Vapor/Kitura. It opens with an impressive banner image, a bulleted list of features (easy date parsing, 140+ languages, codable support), and a strong 'IT'S TESTED!' section plus links to full documentation and playgrounds. The document is rich in content but lacks the standard elements for a tool README: no installation/build instructions, no usage examples, and no contribution guidance.
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).
D21 · Naming Consistency
0 naming inconsistencies across 0 sampled symbols.
D22 · Internal API Consistency
3 API inconsistencies across 46 exposed types.
What to do
- Resolve the 1 Duplicate functionality across types. `SwiftDate` (likely a namespace or… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Inconsistent parsing API surface. `DateInRegion` constructors handle… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Redundant methods on wrapper types. `Date` is a thin wrapper around… finding(s) in Internal API Consistency. — One of this dimension's main actionable groups (1 warning-level).
D28 · Secrets (history)
2 finding(s): 0 critical, 2 high, 0 medium, 0 low.
What to do
- Improve Secrets (history) — currently 8.0/10. — 2 finding(s): 0 critical, 2 high, 0 medium, 0 low.
D29 · Static Analysis (SAST)
semgrep found no security issues.
D34 · Knowledge Freshness
27 of 27 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is Sources/SwiftDate/DateInRegion/DateInRegion+Create.swift. Counted over 27 of the 34 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 3 Most significant orphaned file finding(s) in Knowledge Freshness — start with DateInRegion+Create.swift, ISOParser.swift, Locales.swift. — One of this dimension's main actionable groups (3 recommendation-level).
- Resolve the 1 Dormant codebase finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX9 · CQS / query purity
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Add a 'Testing' section to the root README — how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree, with each file named `NNNN-title` in whatever markup those docs already use, is the most discoverable form).
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add CodeQL's Swift pack (Swift/Xcode) (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 1073 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
What to do
- Add a SAST step to CI running what this repository's stack ships: CodeQL's Swift pack (Swift/Xcode) — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 90% | Exemplary | Strongest area. |
| Architecture | 89% | Strong | Solid. |
| Maturity | 48% | Weak — gated by D34, M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 53% | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 90% | Exemplary | Solid. |
Not evidenced — 5 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 82 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — no DI registrations detected
- AX2 Stateful singletons — no singleton implementations detected
- AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository commits no project file of a kind this check models. This is a gap in the analyzer, not a finding about this repository
- AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository commits no project file of a kind this check models. This is a gap in the analyzer, not a finding about this repository
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository commits no project file of a kind this check models. This is a gap in the analyzer, not a finding about this repository
- AXB1 Runtime evidence locked — no reproducible boot — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — the .swift suite was found but not re-run
- D12 Dependency Hygiene — Not scored — 0 SwiftPM declaration(s) across 1 `Package.swift` and 0 committed pin(s) were read for PINNING discipline (0 defect(s) reported), but the outdated signal comes from listing each declared repository's release tags rather than from a registry, and none of them resolved to a version to compare, so this dimension's own question is only partly answered. NOT a finding that these dependencies are current or healthy.
- D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D23 Boundary Type-Coupling — Production source is present (.swift) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — No inline comments to assess — comment value is not applicable here.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
- D27 Navigability — Navigability analysis does not read .swift, and .swift is this repository's production source, so no call sites were sampled and tracing effort was not assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
- D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Swift Package.swift/Package.resolved — not scanned yet).
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D36 Supply-chain Provenance & Signing — The CI pipeline builds and tests but publishes no released artifact — no package publish, container push, GitHub release or deployment step. Supply-chain provenance, signing and SBOM attest RELEASED artifacts, so there is nothing to attest here. Add them to the release pipeline when this repo starts shipping artifacts (a published package, a container image, a deployed service or a tagged release). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D43 Malicious Dependencies — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Swift Package.swift/Package.resolved — not scanned yet).
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage NOT MEASURED: the Swift half could not be measured — the Swift suite in . produced no coverage export. Coverage is excluded from the score rather than counted as a near-zero. The named suite step is one the repository's maintainers can perform; once it passes, the real number is measured on the next scan. Alternatively, commit the lcov/Cobertura report your CI produces and it is read without a re-run.
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED2 Event/command shape — not scored — deciding whether a command has more than one competing handler requires resolving the call graph, and this analysis resolves a call's owner only where the receiver's type is written down in the source. Reported as guidance rather than measured
- ED5 Idempotency — This check finds retry-prone mutations (command handlers and message/event consumers) by walking the repository's declared types, and none was loaded here, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- GD1 Unfinished & placeholder code — no source files were read — this check reads C# syntax, and none was loaded for this repository. That is a limit of the analyzer, not a finding about your code.
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
- P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
- P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `swift test --enable-code-coverage` (SwiftPM) or `xcodebuild test -scheme <YourScheme> -enableCodeCoverage YES` (an .xcodeproj/.xcworkspace suite), then `xcrun llvm-cov export -format=lcov`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
- PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
- PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X12 Unreachable branch — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X13 Undrained process stream — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X14 Bypassable address classification — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X15 Unvalidated length from an untrusted reader — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X16 Unfloored truncation loop — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X17 Uncapped recursion over a caller-supplied document — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X18 Disposal-pattern correctness — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X19 Unrestored process-global state — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X20 Mistyped argument guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X21 Side-effecting pattern guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X22 Contradicted release guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X23 Unguarded diagnostic materialisation — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X24 Document value interpolated into markup unescaped — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X25 Inert configuration knob — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X26 Unsynchronised callback handoff — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X27 Collection changed while being enumerated — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X28 Index access outside its own emptiness guard — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X29 Per-element action decided by a fixed element — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X30 Support guard that admits what it rejects — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X32 Type resolved by simple name across every loaded assembly — This check reads C# syntax; no C# was loaded for this repository, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 1 finding(s)
- Assertions commented out: testDateInRegion_Hash Tests/SwiftDateTests/TestDateInRegion.swift:157
Serious — 45 finding(s)
- No assertions: testDifferencesBetweenDates Tests/SwiftDateTests/TestDate.swift:22
- No assertions: testDifferenceBetweenDates Tests/SwiftDateTests/TestDate.swift:29
- No assertions: testDateInRegion_EnumerateDates Tests/SwiftDateTests/TestDateInRegion+Create.swift:123
- No assertions: testDateInRegion_InitStringAutoFormat Tests/SwiftDateTests/TestDateInRegion.swift:239
- No assertions: testDotNETFormatter Tests/SwiftDateTests/TestFormatters.swift:361
- No assertions: testRSSFormatter Tests/SwiftDateTests/TestFormatters.swift:368
- No assertions: testRSSAltFormatter Tests/SwiftDateTests/TestFormatters.swift:375
- No assertions: testSQLFormatter Tests/SwiftDateTests/TestFormatters.swift:382
- No assertions: testISOFormatter Tests/SwiftDateTests/TestFormatters.swift:389
- No assertions: test Tests/SwiftDateTests/TestRegion.swift:18
- MethodTooLong: Int.days Sources/SwiftDate/Formatters/ISOParser.swift:56
- MethodTooLong: Int.weeks Sources/SwiftDate/Formatters/ISOParser.swift:61
- MethodTooLong: ISOParser.parse Sources/SwiftDate/Formatters/ISOParser.swift:232
- ClassTooLong: Locales Sources/SwiftDate/Supports/Locales.swift:28
- ClassTooLong: ISOParser Sources/SwiftDate/Formatters/ISOParser.swift:65
- ClassTooLong: Zones Sources/SwiftDate/Supports/Zones.swift:26
- Low cohesion: Date (LCOM4 13) Sources/SwiftDate/Date/Date+Compare.swift:15
- Low cohesion: String (LCOM4 7) Sources/SwiftDate/Foundation+Extras/String+Parser.swift:87
- Low cohesion: DateComponents (LCOM4 5) Sources/SwiftDate/Foundation+Extras/DateComponents+Extras.swift:74
- TooManyMethods: DateInRegion Sources/SwiftDate/DateInRegion/DateInRegion.swift:15
- TooManyMethods: Date Sources/SwiftDate/Date/Date+Compare.swift:15
- FileTooLong: Supports/Locales.swift Sources/SwiftDate/Supports/Locales.swift
- FileTooLong: Formatters/ISOParser.swift Sources/SwiftDate/Formatters/ISOParser.swift
- Duplicated block (9 lines × 2) Sources/SwiftDate/DateRepresentable.swift:387
- Duplicated block (9 lines × 2) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift:82
- ISOParser.parse (cyclomatic 43) Sources/SwiftDate/Formatters/ISOParser.swift:232
- Options.dateFormat (cyclomatic 38) Sources/SwiftDate/Formatters/ISOFormatter.swift:74
- DateInRegion.compare (cyclomatic 35) Sources/SwiftDate/DateInRegion/DateInRegion.swift:130
- TimePeriodProtocol.relation (cyclomatic 28) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift:204
- ISOParser.parse_digits_2 (cyclomatic 25) Sources/SwiftDate/Formatters/ISOParser.swift:442
- ISOParser.parse_digits_4 (cyclomatic 17) Sources/SwiftDate/Formatters/ISOParser.swift:595
- ISOParser.parse (cognitive 83) Sources/SwiftDate/Formatters/ISOParser.swift:232
- Options.dateFormat (cognitive 76) Sources/SwiftDate/Formatters/ISOFormatter.swift:74
- ISOParser.parse_digits_2 (cognitive 54) Sources/SwiftDate/Formatters/ISOParser.swift:442
- ISOParser.parse_digits_4 (cognitive 28) Sources/SwiftDate/Formatters/ISOParser.swift:595
- TimePeriodProtocol.relation (cognitive 27) Sources/SwiftDate/TimePeriod/TimePeriodProtocol.swift:204
- Duplicate functionality across types. `SwiftDate` (likely a namespace or singleton type) and `DateFormats` both expose a `resetAutoFormats` method. Since `DateFormats` also holds the `autoFormats` property, the method on `SwiftDate` is redundant or implies a global state that should be encapsulated within `DateFormats`.
- Inconsistent parsing API surface. `DateInRegion` constructors handle single and multiple format strings directly. However, `DateFormats` exposes separate `parse` overloads for single vs. multiple formats, and returns a standard `Date?` instead of `DateInRegion?`, forcing the caller to handle region conversion separately or lose region context. This creates two different patterns for the same logical operation (parsing a string to a date with region awareness).
- Redundant methods on wrapper types. `Date` is a thin wrapper around `DateInRegion` (or vice versa, depending on internal implementation, but they share identical signatures for `past` and `future`). Having these methods on both types creates confusion about which type to use for simple time travel operations, especially since they return different types (`Date` vs `DateInRegion`), requiring implicit/explicit conversion.
- Duplicated block (13 lines × 2) Sources/SwiftDate/TimePeriod/Groups/TimePeriodChain.swift:31
- Duplicated block (11 lines × 2) Sources/SwiftDate/TimePeriod/Groups/TimePeriodGroup.swift:94
- Duplicated block (10 lines × 2) Sources/SwiftDate/Date/Date.swift:106
- Duplicated block (7 lines × 2) Sources/SwiftDate/Date/Date+Create.swift:21
- Duplicated block (5 lines × 2) Sources/SwiftDate/Date/Date+Create.swift:70
- Coverage not measured — Swift suite
Minor — 10 finding(s)
- Most significant orphaned file Sources/SwiftDate/DateInRegion/DateInRegion+Create.swift
- Most significant orphaned file Sources/SwiftDate/Formatters/ISOParser.swift
- Most significant orphaned file Sources/SwiftDate/Supports/Locales.swift
- No ADRs found
- Dormant codebase
- REDACTED
- No ADRs
- No architecture diagram/doc
- No SAST
- No changelog
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-0627c509dc524aa4973becaec20db737/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-0627c509dc524aa4973becaec20db737/tree.json --exit-code 0 --source . | 2 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off . | 0 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | none (dependency manifest found, not scanned for vulnerabilities here) | — | none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Swift Package.swift/Package.resolved — not scanned yet). | 0 | — |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | none (dependency manifest found, not scanned for vulnerabilities here) | — | none (dependency manifest found, not scanned for vulnerabilities here): not applicable — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Swift Package.swift/Package.resolved — not scanned yet). | 0 | — |