mathnet-symbolics — Watchdog Audit

Executive summary

Read through the Preview lens: this repo is pre-1.0 / in development, so the colour bands are relaxed to what a preview needs — *green* means good enough for a preview, not yet production-stable. Code correctness and security stay near-strict even here; the score itself is absolute and comparable across repos.

mathnet/mathnet-symbolics is in good overall health (65%), but at least one category below sits in Adequate-or-worse territory — most items are improvements, and the weakest category contains work to schedule, not shelve.

It is strongest in Architecture (100%) — the structure is clean and changes stay contained. Security (95%) is solid too.

The area that most needs attention is Maturity (48%) — onboarding is slow — key decisions and the architecture aren't written down, so contributors have to reverse-engineer the intent.

Leadership focus, highest impact first: Record significant decisions one document per decision (Architecture documentation); build/run (quick start) section to the root README (Documentation (README)); 2 Orphaned knowledge finding(s) (Knowledge Freshness).

For scale: Small (~4,999 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

Encouragingly, the gaps are in documentation and release process — not in the code's correctness, structure or security, which are strong. They're low-risk to close, and doing so would lift the grade without re-engineering anything that already works.

Code Health 82% Strong Architecture 100% ★ Exemplary Maturity 48% Adequate · gated by D34, M2 Readiness 74% Strong Security 95% ★ Exemplary

How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.

Maturity 48% · 47% weightReadiness 74% · 26% weightCode Health 82% · 14% weightSecurity 95% · 8% weightArchitecture 100% · 4% weight

Raise Maturity 48 → 70 (the Healthy floor) ⇒ headline 65 → ~76.

Code composition — where the lines go

Tests 100%

Rebuild cost & value ~ Modeled — €2,700–€13,000

Cost to rebuild	€2,700–€13,000 (0.1 person-years (45–141 h), ~1 engineer)
Domain complexity	Standard — harder problems cost more per line
Quality factor	0.9× (at 65% quality) — the last 20% of quality is most of the work
Size & shape	Small · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)

This codebase represents roughly ~0.1 person-years of build effort (about ~€8,000 to rebuild). Its weakest lens is Maturity at 48% — the part of that asset most exposed by the findings below.

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.0) — standard service × a 0.9× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

Resolve the 2 Orphaned knowledge finding(s) in Knowledge Freshness — start with Expression.fs, SymbolicExpression.fs.

+14.3 pts · Low effort · Knowledge Freshness

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

+16.8 pts · Medium effort · Architecture documentation

Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness.

+7.9 pts · Low effort · Knowledge Freshness

Diagnosis — what's actually going on

Value concentrated against a weak lens · Medium · Value at risk

This is a Small asset (~0.1 person-years to rebuild), and its weakest lens is Maturity at 48%. The operational and business risk on an asset this size concentrates there — that's where remediation buys the most protection.

Evidence: valuation: Small, ~0.1 person-years rebuild (4,999 LoC) · weakest lens: Maturity 48%

→ Direct remediation budget at Maturity first — highest risk-reduction per euro on an asset this size.

Highest-leverage move · Medium · Leverage

Of everything flagged, the best return on effort is: Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form). The rest can wait behind it.

Evidence: priority ranking: top of 5 ranked by impact/effort

→ Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

Architecture — module dependency matrix

8 modules, 1 dependency — every dependency points down the layering, so there are no cycles. Rows and columns are the same modules, ordered so that a module only depends on ones above it. A cell means the row depends on the column, and its number is how many type pairs create that dependency. Read one thing: is anything above the diagonal? A mark there is a dependency cycle. (A cycle is all this shows — an unusual but cycle-free dependency sits below the diagonal like any other.)

At a glance — Code Health · 82% · Strong

The Good

D1 · .NET / C# Cyclomatic Complexity 7.9 D2 · .NET / C# Cognitive Complexity 8.2 D3 · .NET / C# God Classes 7.9 D4 · .NET / C# Code Duplication 8.9

At a glance — Architecture · 100% · Exemplary

The Good

D35 · .NET / C# Change Coupling 10.0

At a glance — Maturity · 48% · Adequate · gated by D34, M2

The Good

D15 · .NET / C# Churn × Complexity Hotspots 10.0 D19 · .NET / C# Documentation Quality 8.0 D21 · .NET / C# Naming Consistency 10.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0

The Bad

M1 · Repo Documentation (README) 6.0

The Ugly

D34 · .NET / C# Knowledge Freshness 0.0 M2 · Repo Architecture documentation 0.0

At a glance — Readiness · 74% · Strong

The Good

D13 · .NET / C# Secret Scanning 10.0 P1 · Repo CI/CD gates 10.0 P6 · Repo Release Hygiene 10.0

The Bad

P3 · Repo Security & performance tooling 6.0 P4 · Repo Deployment & Rollback 5.0

At a glance — Security · 95% · Exemplary

The Good

D28 · .NET / C# Secrets (history) 10.0 D29 · .NET / C# Static Analysis (SAST) 8.4 D30 · .NET / C# Dependency Vulnerabilities 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP category	Findings	Severity
A03:2021 — Injection	1	High / Critical

Roadmap

Begin by establishing an architecture decision record system to capture significant design choices and their consequences. Next, update the root README with a build and run section to help new contributors get started quickly. Then, address the two orphaned knowledge items in Expression.fs and SymbolicExpression.fs to improve knowledge freshness. After that, resolve the remaining orphaned files to further enhance knowledge freshness. Finally, continue improving the overall documentation quality, which is already strong but can be refined.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Resolve the 2 Orphaned knowledge finding(s) in Knowledge Freshness — start with Expression.fs, SymbolicExpression.fs.	+14.3 pts	Low	Knowledge Freshness
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).	+16.8 pts	Medium	Architecture documentation
Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness.	+7.9 pts	Low	Knowledge Freshness
Add a build/run (quick start) section to the root README — the first thing a newcomer needs.	+15.4 pts	Medium	Documentation (README)
Improve Documentation Quality — currently 8.0/10.	+4.7 pts	Medium	Documentation Quality
The .NET analyzers are running but not blocking — tighten them (set <AnalysisMode>All</AnalysisMode>, or treat analyzer warnings as errors on CI) so a security/quality regression fails the build rather than scrolling past as a warning.	+4.4 pts	Medium	Security & performance tooling
Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.	+4.4 pts	Medium	Deployment & Rollback
Resolve the 1 High finding(s) in Static Analysis (SAST) — start with dependabot.yml.	+0.4 pts	Low	Static Analysis (SAST)

File quality

Per-file score 0–10 — a quality signature. Of 13 files carrying findings, judged against the Preview bar: 0% slop · 0% mixed · 100% near-clean.

File	Score	Band	Worst signal
src/Symbolics/Expression.fs	7.0	Near-clean	Cyclomatic Complexity: Operators.multiply (cyclomatic 46)
src/Symbolics/Polynomial.fs	7.2	Near-clean	God Classes: TooManyMethods: Polynomial
.github/dependabot.yml	7.2	Near-clean	Static Analysis (SAST): High: dependabot-missing-cooldown
src/Symbolics/Typed/Linq.fs	7.4	Near-clean	Cyclomatic Complexity: Linq.toLambda (cyclomatic 65)
src/Symbolics/Approximation.fs	7.4	Near-clean	Code Duplication: Duplicated block (11 lines × 2)
src/Symbolics/Visual/VisualExpression.fs	7.8	Near-clean	Cyclomatic Complexity: VisualExpressionModule.fromExpression (cyclomatic 66)
src/Symbolics/Visual/LaTeX.fs	7.8	Near-clean	Cyclomatic Complexity: LaTeXFormatter.format (cyclomatic 56)
src/Symbolics/Trigonometric.fs	7.8	Near-clean	Cyclomatic Complexity: Trigonometric.Contract (cyclomatic 41)
src/Symbolics/Visual/Infix.fs	7.8	Near-clean	Code Duplication: Duplicated block (9 lines × 2)
src/Symbolics/Structure.fs	7.8	Near-clean	Code Duplication: Duplicated block (6 lines × 2)
src/Symbolics/SymbolicExpression.fs	8.5	Near-clean	God Classes: TooManyMethods: SymbolicExpression
src/Symbolics/Exponential.fs	8.5	Near-clean	Code Duplication: Duplicated block (7 lines × 2)
src/Symbolics/Typed/TypedExpression.fs	8.5	Near-clean	Code Duplication: Duplicated block (6 lines × 2)

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 19 of 21 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 2 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.4 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 21 dimensions across the health lenses

D1D2D3D4D13D15D19D21D28D29D30D34D35M1M2M3M4P1P3P4P6

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 37 of 43 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
jscpd	Code duplication	—	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.302	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.302	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019fd53c-2ce6-70e3-9235-04f909387346.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

A clean run — every tool resolved and ran, and every applicable dimension was measured at full confidence. No scanner was unavailable, no analysis timed out or crashed, and nothing fell back to a degraded estimate.

When something does degrade — a missing scanner, a shallow clone, an LLM hiccup — it is named here explicitly and its exact cause recorded in diagnostics.md, never absorbed silently into the score.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity (jscpd) — it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and the advisory database — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen.
D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity7.9 / 10Strong✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.9 / 10 · rule-coverage 100% · ceiling Prevented

7 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was VisualExpressionModule.fromExpression at 66. A further 12 method(s) were over the threshold but excluded as flat dispatchers (a long switch/match over independent cases: many branches, almost no nesting), the largest being Calculus.Differentiate at 52 — they are counted neither in the figure above nor in this dimension's score.

VisualExpressionModule.fromExpression (cyclomatic 66)src/Symbolics/Visual/VisualExpression.fs:50

Linq.toLambda (cyclomatic 65)src/Symbolics/Typed/Linq.fs:43

LaTeXFormatter.format (cyclomatic 56)src/Symbolics/Visual/LaTeX.fs:53

Operators.multiply (cyclomatic 46)src/Symbolics/Expression.fs:278

Operators.orderRelation (cyclomatic 45)src/Symbolics/Expression.fs:173

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 1 VisualExpressionModule.fromExpression (cyclomatic 66) finding(s) in Cyclomatic Complexity — start with VisualExpression.fs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 Linq.toLambda (cyclomatic 65) finding(s) in Cyclomatic Complexity — start with Linq.fs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 LaTeXFormatter.format (cyclomatic 56) finding(s) in Cyclomatic Complexity — start with LaTeX.fs. — One of this dimension's main actionable groups (1 warning-level).
Enforce Cyclomatic Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D2 · Cognitive Complexity8.2 / 10Strong✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.2 / 10 · rule-coverage 100% · ceiling Prevented

7 method(s) exceeded the cognitive complexity threshold of 15; the worst was Trigonometric.Contract at 50.

Trigonometric.Contract (cognitive 50)src/Symbolics/Trigonometric.fs:71

LaTeXFormatter.format (cognitive 49)src/Symbolics/Visual/LaTeX.fs:53

VisualExpressionModule.fromExpression (cognitive 30)src/Symbolics/Visual/VisualExpression.fs:50

Operators.multiply (cognitive 24)src/Symbolics/Expression.fs:278

Operators.orderRelation (cognitive 17)src/Symbolics/Expression.fs:173

+ 2 more group(s) — more in Appendix A; the complete list is findings.md.

What to do

Resolve the 1 Trigonometric.Contract (cognitive 50) finding(s) in Cognitive Complexity — start with Trigonometric.fs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 LaTeXFormatter.format (cognitive 49) finding(s) in Cognitive Complexity — start with LaTeX.fs. — One of this dimension's main actionable groups (1 warning-level).
Resolve the 1 VisualExpressionModule.fromExpression (cognitive 30) finding(s) in Cognitive Complexity — start with VisualExpression.fs. — One of this dimension's main actionable groups (1 warning-level).
Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D3 · God Classes7.9 / 10Strong✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 7.9 / 10 · rule-coverage 100% · ceiling Prevented

4 god class(es) detected.

TooManyMethods: SymbolicExpression · ×3src/Symbolics/SymbolicExpression.fs:25

FileTooLong: Symbolics/Expression.fssrc/Symbolics/Expression.fs:0

What to do

Resolve the 3 TooManyMethods finding(s) in God Classes — start with SymbolicExpression.fs, Expression.fs, Polynomial.fs. — One of this dimension's main actionable groups (3 warning-level).
Resolve the 1 FileTooLong finding(s) in God Classes — start with Expression.fs. — One of this dimension's main actionable groups (1 warning-level).
Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D4 · Code Duplication8.9 / 10Strong✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 8.9 / 10 · rule-coverage 100% · ceiling Verified

16 duplicated block group(s) detected.

Duplicated block (6 lines × 2) · ×8src/Symbolics/Approximation.fs:259

Duplicated block (9 lines × 2) · ×4src/Symbolics/Approximation.fs:22

Duplicated block (7 lines × 2) · ×2src/Symbolics/Polynomial.fs:168

Duplicated block (11 lines × 2)src/Symbolics/Approximation.fs:248

Duplicated block (7 lines × 4)src/Symbolics/Expression.fs:750

What to do

Resolve the 8 Duplicated block (6 lines × 2) finding(s) in Code Duplication — start with Expression.fs (2), Structure.fs (2), Approximation.fs. — One of this dimension's main actionable groups (8 warning-level).
Resolve the 4 Duplicated block (9 lines × 2) finding(s) in Code Duplication — start with Approximation.fs, Polynomial.fs, Infix.fs. — One of this dimension's main actionable groups (4 warning-level).
Resolve the 2 Duplicated block (7 lines × 2) finding(s) in Code Duplication — start with Polynomial.fs, Exponential.fs. — One of this dimension's main actionable groups (2 warning-level).
Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d4_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

Do you agree with this assessment?

D19 · Documentation Quality / 10Strong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The Math.NET Symbolics README and accompanying docs are clear, complete, and well-structured. The main content is a thorough list of expression-algebraic operator examples (taylor, expand, simplify, rationalize) with the corresponding F# code plus an exhaustive build guide covering NuGet packages, platform support, dependency restore, and FAKE automation for CI.

What to do

Improve Documentation Quality — currently 8.0/10. — The Math.NET Symbolics README and accompanying docs are clear, complete, and well-structured. The main content is a thorough list of expression-algebraic operator examples (taylor, expand, simplify, rationalize) with the corresponding F# code plus an exhaustive build guide covering NuGet packages, platform support, dependency restore, and FAKE automation for CI.

Detailed fixes: d19_recommendation.md.

Do you agree with this assessment?

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)8.4 / 10Strong✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 8.4 / 10 · rule-coverage 100% · ceiling Documented

1 finding(s): 0 critical, 1 high, 0 medium, 0 low.

High: dependabot-missing-cooldown.github/dependabot.yml:8detected by semgrep finding

What to do

Resolve the 1 High finding(s) in Static Analysis (SAST) — start with dependabot.yml. — One of this dimension's main actionable groups (1 issue-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D30 · Dependency Vulnerabilities10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any dependencies have known published vulnerabilities (CVEs), direct or transitive.

Method: NuGet CVE scan via dotnet list package --vulnerable including transitive; severity tally (Critical/High/Medium/Low) to 0-10 tight normalizer. Exhaustive, deterministic; degrades when absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No known-vulnerable NuGet packages (direct or transitive).

✓ On the Gold path — maintain.

Detailed fixes: d30_recommendation.md.

Do you agree with this assessment?

D34 · Knowledge Freshness0.0 / 10Critical✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

18 of 18 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/Symbolics/Expression.fs.

Orphaned knowledge · ×2src/Symbolics/Expression.fs

Further orphaned files (smaller)

What to do

Resolve the 2 Orphaned knowledge finding(s) in Knowledge Freshness — start with Expression.fs, SymbolicExpression.fs. — One of this dimension's main actionable groups (2 issue-level).
Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

M1 · Documentation (README)6.0 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

What to do

Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
Add a 'Testing' section to the root README — how to run the test suite.
Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.

Do you agree with this assessment?

M2 · Architecture documentation0.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no `NNNN-title.md` documents and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
No C4/PlantUML/Mermaid diagram or architecture.md — the high-level shape isn't documented.

What to do

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).
Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.

Do you agree with this assessment?

M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Do you agree with this assessment?

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

Do you agree with this assessment?

P1 · CI/CD gates10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

Do you agree with this assessment?

P3 · Security & performance tooling6.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

What to do

The .NET analyzers are running but not blocking — tighten them (set <AnalysisMode>All</AnalysisMode>, or treat analyzer warnings as errors on CI) so a security/quality regression fails the build rather than scrolling past as a warning.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

What to do

Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.

Do you agree with this assessment?

P6 · Release Hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	82%	Strong	Solid.
Architecture	100%	Exemplary	Strongest area.
Maturity	48%	Adequate — gated by D34, M2	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness	74%	Strong	Solid.
Security	95%	Exemplary	Solid.

Not included — 74 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
AX1 Captive dependencies — no DI registrations detected
AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX2 Stateful singletons — no singleton implementations detected
AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
D10 Test Quality — ~1799 lines of test source are present (.fs) but the test-quality collector reads C# only, so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included
D12 Dependency Hygiene — Dependency hygiene not measured — no packages were read
D14 License Compliance — Not scored — this repository's projects are MSBuild/NuGet projects, whose package licenses are exactly what this dimension reads, but no license could be resolved for them (the .NET license collector did not run, or restore failed). A gap in the analysis run, NOT a finding that the repository's licenses are compliant.
D16 Bus Factor — dormant codebase — no living knowledge left to concentrate
D17 Explicit Debt — the C# workspace loaded 0 projects, so explicit-debt density could not be measured
D18 Solution Shape — D18 scores the shape of a C#/VB .NET solution; this repository's .NET projects are all F# (.fsproj), which the C#/VB workspace does not load, so the dimension does not apply.
D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
D22 Internal API Consistency — No exposed public API
D23 Boundary Type-Coupling — Production source is present (.fs) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
D33 JS/npm Dependency Vulnerabilities — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.
D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D38 OSV Dependency Vulnerabilities — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.
D39 IL Efficiency — No first-party assembly was produced by the build.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
D6 Cohesion (LCOM4) — Cohesion (LCOM4) is measured over a C#/VB class graph, and this repository's production source is .fs, which this pass does not read — so no class could be assessed. Not scored — this is a gap in the analyzer, not a finding about this repository.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not measured — no coverage collector is wired up
D9 Test Distribution — Test source is present (.fs) but the test-pyramid classifier reads C# only, so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
DM1 Domain Modelling — not scored — this repository shows only 1 of the 3 signals this check looks for (11 value object(s))
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
GD1 Unfinished & placeholder code — no source files
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (Cobertura — `dotnet test --collect:"XPlat Code Coverage"` with a `coverlet.collector` PackageReference) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Issue — 3 finding(s)

D34 · Knowledge Freshness · Orphaned knowledge · ×2

Orphaned knowledge src/Symbolics/Expression.fs — No living knowledge remains for this large file — its last meaningful change has decayed away; if it breaks, no one currently understands it. Schedule a read-through / add characterisation tests before it bites.
Orphaned knowledge src/Symbolics/SymbolicExpression.fs — No living knowledge remains for this large file — its last meaningful change has decayed away; if it breaks, no one currently understands it. Schedule a read-through / add characterisation tests before it bites.

D29 · Static Analysis (SAST) · High · ×1

High: dependabot-missing-cooldown .github/dependabot.yml:8 — This Dependabot configuration does not set a cooldown period. Newly published packages can be malicious or unstable. Add a `cooldown` block with `default-days: 7` to each `package-ecosystem` entry under `updates` to wait 7 days before proposing updates to newly published package versions. Reference: https://docs.github.com/en/code-security/dependabot/dependabot-version-updates/configuration-options-for-the-dependabot.yml-file#cooldown. This is a semgrep security-AUDIT rule reporting a POLICY that is absent or weaker than its recommendation, not an exploitable defect. Confirm whether the current setting is a deliberate decision for this repository — and apply the change where it is not; where it is (a policy your release process already enforces elsewhere, or one this repository has consciously opted out of), record the decision and leave the configuration as it is.

Warning — 36 finding(s)

D4 · Code Duplication · Duplicated block (6 lines × 2) · ×8

Duplicated block (6 lines × 2) src/Symbolics/Approximation.fs:259 — src/Symbolics/Approximation.fs:259-264 | src/Symbolics/Expression.fs:860-865 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once.
Duplicated block (6 lines × 2) src/Symbolics/Expression.fs:790 — src/Symbolics/Expression.fs:790-795 | src/Symbolics/Expression.fs:798-803 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (6 lines × 2) src/Symbolics/Expression.fs:807 — src/Symbolics/Expression.fs:807-812 | src/Symbolics/Expression.fs:815-820 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/Symbolics/Structure.fs:33 — src/Symbolics/Structure.fs:33-38 | src/Symbolics/Structure.fs:43-48 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/Symbolics/Structure.fs:64 — src/Symbolics/Structure.fs:64-69 | src/Symbolics/Trigonometric.fs:159-164 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once.
Duplicated block (6 lines × 2) src/Symbolics/Polynomial.fs:175 — src/Symbolics/Polynomial.fs:175-180 | src/Symbolics/Polynomial.fs:425-430 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (6 lines × 2) src/Symbolics/Visual/Infix.fs:136 — src/Symbolics/Visual/Infix.fs:136-141 | src/Symbolics/Visual/LaTeX.fs:67-72 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once.
Duplicated block (6 lines × 2) src/Symbolics/Typed/TypedExpression.fs:74 — src/Symbolics/Typed/TypedExpression.fs:74-79 | src/Symbolics/Typed/TypedExpression.fs:87-92 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D4 · Code Duplication · Duplicated block (9 lines × 2) · ×4

Duplicated block (9 lines × 2) src/Symbolics/Approximation.fs:22 — src/Symbolics/Approximation.fs:22-31 | src/Symbolics/Evaluate.fs:31-39 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once.
Duplicated block (9 lines × 2) src/Symbolics/Polynomial.fs:65 — src/Symbolics/Polynomial.fs:65-73 | src/Symbolics/Polynomial.fs:373-381 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (9 lines × 2) src/Symbolics/Visual/Infix.fs:148 — src/Symbolics/Visual/Infix.fs:148-156 | src/Symbolics/Visual/LaTeX.fs:79-87 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.
Duplicated block (9 lines × 2) src/Symbolics/Typed/Linq.fs:215 — src/Symbolics/Typed/Linq.fs:215-223 | src/Symbolics/Typed/Linq.fs:250-258 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.

D3 · God Classes · TooManyMethods · ×3

TooManyMethods: SymbolicExpression src/Symbolics/SymbolicExpression.fs:25 — TooManyMethods — 165 methods. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: Operators src/Symbolics/Expression.fs:124 — TooManyMethods — 82 methods. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.
TooManyMethods: Polynomial src/Symbolics/Polynomial.fs:10 — TooManyMethods — 40 methods. To reduce it, group the members that share the same data into a smaller type of their own and delegate to it, so no single type carries every responsibility.

D4 · Code Duplication · Duplicated block (7 lines × 2) · ×2

Duplicated block (7 lines × 2) src/Symbolics/Polynomial.fs:168 — src/Symbolics/Polynomial.fs:168-174 | src/Symbolics/Polynomial.fs:418-424 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
Duplicated block (7 lines × 2) src/Symbolics/Exponential.fs:47 — src/Symbolics/Exponential.fs:47-53 | src/Symbolics/Trigonometric.fs:139-146 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once.

D1 · Cyclomatic Complexity · VisualExpressionModule.fromExpression (cyclomatic 66) · ×1

VisualExpressionModule.fromExpression (cyclomatic 66) src/Symbolics/Visual/VisualExpression.fs:50 — VisualExpressionModule.fromExpression has cyclomatic complexity 66 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D1 · Cyclomatic Complexity · Linq.toLambda (cyclomatic 65) · ×1

Linq.toLambda (cyclomatic 65) src/Symbolics/Typed/Linq.fs:43 — Linq.toLambda has cyclomatic complexity 65 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D1 · Cyclomatic Complexity · LaTeXFormatter.format (cyclomatic 56) · ×1

LaTeXFormatter.format (cyclomatic 56) src/Symbolics/Visual/LaTeX.fs:53 — LaTeXFormatter.format has cyclomatic complexity 56 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D1 · Cyclomatic Complexity · Operators.multiply (cyclomatic 46) · ×1

Operators.multiply (cyclomatic 46) src/Symbolics/Expression.fs:278 — Operators.multiply has cyclomatic complexity 46 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D1 · Cyclomatic Complexity · Operators.orderRelation (cyclomatic 45) · ×1

Operators.orderRelation (cyclomatic 45) src/Symbolics/Expression.fs:173 — Operators.orderRelation has cyclomatic complexity 45 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D1 · Cyclomatic Complexity · Trigonometric.Contract (cyclomatic 41) · ×1

Trigonometric.Contract (cyclomatic 41) src/Symbolics/Trigonometric.fs:71 — Trigonometric.Contract has cyclomatic complexity 41 (threshold 15). To reduce it, separate the branches: extract each independent case into its own named function so the top-level body reads as a short sequence of named decisions.

D1 · Cyclomatic Complexity · Operators.add (cyclomatic 40) · ×1

Operators.add (cyclomatic 40) src/Symbolics/Expression.fs:219 — Operators.add has cyclomatic complexity 40 (threshold 15). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Where every arm is uniform — the same kind of value, with no behaviour of its own — a table keyed by the case is the shorter form; wherever the arms carry different data or different behaviour, keep them as cases, because collapsing those trades an explicit, reviewable set of cases for nothing.

D16 · Bus Factor · dormant codebase · ×1

dormant codebase — no living knowledge left to concentrate — All 15 significant source file(s) were last meaningfully changed so long ago that no living knowledge remains — nothing since has been substantial enough to re-establish ownership (a broad, mechanical sweep that touches many files shallowly does not count, and neither does no activity at all). There is no concentration to measure, so the bus factor is not scored. This is not a clean bill: nobody currently holds working knowledge of this code (see D34 Knowledge Freshness).

D2 · Cognitive Complexity · Trigonometric.Contract (cognitive 50) · ×1

Trigonometric.Contract (cognitive 50) src/Symbolics/Trigonometric.fs:71 — Trigonometric.Contract has cognitive complexity 50 (threshold 15). Drivers by points: loops 24, if/else 12, match/switch 10, boolean chains 4 (nesting depth added 23). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D2 · Cognitive Complexity · LaTeXFormatter.format (cognitive 49) · ×1

LaTeXFormatter.format (cognitive 49) src/Symbolics/Visual/LaTeX.fs:53 — LaTeXFormatter.format has cognitive complexity 49 (threshold 15). Drivers by points: match/switch 33, if/else 15, boolean chains 1 (nesting depth added 24). To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D2 · Cognitive Complexity · VisualExpressionModule.fromExpression (cognitive 30) · ×1

VisualExpressionModule.fromExpression (cognitive 30) src/Symbolics/Visual/VisualExpression.fs:50 — VisualExpressionModule.fromExpression has cognitive complexity 30 (threshold 15). Drivers by points: match/switch 12, boolean chains 9, if/else 9 (nesting depth added 6). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · Operators.multiply (cognitive 24) · ×1

Operators.multiply (cognitive 24) src/Symbolics/Expression.fs:278 — Operators.multiply has cognitive complexity 24 (threshold 15). Drivers by points: if/else 17, match/switch 6, boolean chains 1 (nesting depth added 8). To reduce it, split the body into named stages: move each independent step or branch into its own named function so the body reads as a short sequence of named calls rather than one long body.

D2 · Cognitive Complexity · Operators.orderRelation (cognitive 17) · ×1

Operators.orderRelation (cognitive 17) src/Symbolics/Expression.fs:173 — Operators.orderRelation has cognitive complexity 17 (threshold 15). Drivers by points: if/else 15, match/switch 2 (nesting depth added 5). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D2 · Cognitive Complexity · Operators.add (cognitive 17) · ×1

Operators.add (cognitive 17) src/Symbolics/Expression.fs:219 — Operators.add has cognitive complexity 17 (threshold 15). Drivers by points: if/else 12, match/switch 5 (nesting depth added 4). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D2 · Cognitive Complexity · Linq.toLambda (cognitive 16) · ×1

Linq.toLambda (cognitive 16) src/Symbolics/Typed/Linq.fs:43 — Linq.toLambda has cognitive complexity 16 (threshold 15). Drivers by points: if/else 10, match/switch 6 (nesting depth added 4). The drivers above price the dispatch low by construction — a dispatch is charged once however many cases it lists, while each branch inside an arm is charged in full — so most of this count is what the case bodies hold, and the arms are where it can be reduced. To reduce it, keep the dispatch but shrink the arms: move each non-trivial case body into its own named function (or onto the value being matched) so the dispatch reads one line per case, and group related cases into a sub-dispatch. Keep every case explicit, and make the behaviour for cases you do not list a deliberate choice rather than an accident.

D3 · God Classes · FileTooLong · ×1

FileTooLong: Symbolics/Expression.fs src/Symbolics/Expression.fs:0 — FileTooLong — 928 significant lines (blank, comment-only and punctuation-only lines excluded). To reduce it, split the file along the responsibilities already in it: move each cohesive group of declarations into its own sibling file in the same module or package, so no one file has to be read whole to change one of them.

D4 · Code Duplication · Duplicated block (11 lines × 2) · ×1

Duplicated block (11 lines × 2) src/Symbolics/Approximation.fs:248 — src/Symbolics/Approximation.fs:248-258 | src/Symbolics/Expression.fs:849-859 — the copies sit in sibling files of one directory: extract the block into a single shared function in that directory and call it from each site, so a change lands once. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.

D4 · Code Duplication · Duplicated block (7 lines × 4) · ×1

Duplicated block (7 lines × 4) src/Symbolics/Expression.fs:750 — src/Symbolics/Expression.fs:750-756 | src/Symbolics/Expression.fs:761-767 | src/Symbolics/Expression.fs:772-778 | src/Symbolics/Expression.fs:781-787 — all 4 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. Note that the copies do not run to the end of the range shown: their LAST lines are different code, not the same code under different names — the matched region ends inside that line. Extract the lines above it, and read the last line of each site separately.

D8 · Code Coverage · Coverage not measured · ×1

Coverage not measured — no coverage collector is wired up — Coverage NOT MEASURED: the test suite built and its tests PASSED, but the run produced no coverage data — `--collect:"XPlat Code Coverage"` found no data collector, which is what a test project with no `coverlet.collector` PackageReference does. Nothing is wrong with the suite or the build; there is simply no coverage instrumentation wired up. Add a `coverlet.collector` PackageReference to the test project(s) (or commit the Cobertura/OpenCover/lcov report your CI produces) and real coverage will be measured. It is excluded from the score rather than counted as a near-zero defect.

Recommendation — 2 finding(s)

D11 · Test Reliability · Test reliability not included · ×1

Test reliability not included — Test source is present (.fs) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.

D34 · Knowledge Freshness · Further orphaned files (smaller) · ×1

Further orphaned files (smaller) — 16 smaller file(s) also have no living knowledge — folded into the freshness score and metrics rather than listed individually (18 orphaned of 18 analysed files in total, counted over production source files of roughly 100 lines or more, excluding tests, vendored, generated and example/demo trees, largest first).

Info — 2 finding(s)

D12 · Dependency Hygiene · Dependency hygiene not measured · ×1

Dependency hygiene not measured — no packages were read — This repository's projects (.fs) are MSBuild/NuGet projects and their `<PackageReference>` dependencies are exactly what this dimension assesses — but `dotnet list package` returned no packages for them, so there was nothing to assess. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED. This is a gap in the analysis run (restore or project-load failed for these projects), not a verdict about this repository.

D22 · Internal API Consistency · No exposed public API · ×1

No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Findings	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .	0	artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --json --quiet --timeout 0 --metrics off .	1	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	dotnet	—	dotnet list MathNet.Symbolics.sln package --vulnerable --include-transitive --format json	0	artifacts/raw/dotnet-vulnerable.json
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.	0	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.	0	—
D33 · JS/npm Dependency Vulnerabilities	trivy	—	trivy: not applicable — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.	0	—
D36 · Supply-chain Provenance & Signing	provenance	—	provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.	0	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	0	—
D38 · OSV Dependency Vulnerabilities	osv-scanner	—	osv-scanner: not applicable — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.	0	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	0	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	0	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	0	—

Run 019fd53c-2ce6-70e3-9235-04f909387346 · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Mathnet/mathnet-Symbolics

Executive summary

Top priorities

Diagnosis — what's actually going on

Architecture — module dependency matrix

At a glance — Code Health · 82% · Strong

At a glance — Architecture · 100% · Exemplary

At a glance — Maturity · 48% · Adequate · gated by D34, M2

At a glance — Readiness · 74% · Strong

At a glance — Security · 95% · Exemplary

Security & Compliance — OWASP Top-10 mapping

Roadmap

File quality

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts