Public report of medevorg/nodetskeleton, published 22 October 2026. It has the same score, grades and number of findings as the full report. The details of security findings (where they are in the code, which known vulnerabilities and which passwords or keys were found) are left out, so nobody can use them against the project.
Public
Executive report Measured under the Code Assurance Index, an open standard for code quality, using its published scoring rules (rubric version 2026.10.5). Watchdog signed this survey and filed it in the standard's public register, where anyone can look it up by its survey ID. Check this survey → Signed and filed in the standard's public register, 22 October 2026, 15:13 UTC · Survey ID cd_ef135a125acf420ab439ccd92c2a3dd1

medevorg/nodetskeleton

Measured 22 October 2026, 15:09 UTC, at code version 5021642

Bus factor: not measured

Bus factor is not measured: One contributor carries this repository.

CAI score 52out of 100 Weak
CriticalWeakAdequateStrongExemplary
Down 2 since the last survey

The score is built from these lenses. Each lens grades one area of the code, such as how easy it is to change or how well it is protected. The weakest lens counts most, so one weak area pulls the score down instead of being averaged away.

Domain Modelling 100 Exemplary Performance 100 Exemplary Security and Compliance 81 Adequate Architecture 78 Strong Code Health 71 Strong Maturity 69 Adequate Production Readiness 26 Weak

A small codebase: 4,255 lines of product code in 2 projects, tests not counted · Estimated rebuild effort: about 0.1 person-years · Weakest lens: Production Readiness, 26

Findings by how serious they are

15 critical 83 serious 28 minor

7 dimensions are left out of the score. For each one, Watchdog either couldn't measure it in this code, or found no evidence of the safeguard it looks for, such as a tested backup restore. They count neither for nor against the score, and Limitations lists each one with its reason.

This survey was produced by

Watchdog
Producer
Canine Development
Analyzer
Watchdog engine 1.0.0
Measured
22 October 2026, 15:09 UTC

A measurement, not a certificate. The Code Assurance Index records a number together with the evidence it was worked out from, so anyone can recalculate it, but it doesn't certify or guarantee the code. The standard was written by Canine Development, which also builds Watchdog. It is open to any tool that implements it, and today Watchdog is the only one that does.

The score is deterministic, which means the same code always gets the same score. Watchdog works it out with tools that follow published rules, and an AI model never decides it, so anyone who applies the same rules to the same code gets the same number. How it is done is explained under Methodology ▸

72of 75 dimensions measured by tools. The other 3 are advisory notes from an AI model, which explain the code but don't count towards the score.
111of 126 findings point to an exact file and line, so you can open each one in the code. The other 15 concern the repository as a whole, such as missing documentation.
75dimensions across 7 lenses, read from 4,255 lines of product code in 2 projects.
Chapters

Executive summary

medevorg/nodetskeleton scores 52 out of 100, which would normally be rated Adequate, but it is rated Weak because its weakest group of dimensions, Security, is rated Critical. The standard never rates a score more than one step above its weakest group, so a high average can't hide a weak area.

The weakest lens counts most in the score, and here that is Production Readiness, which scores 26 and is rated Weak. Its REDACTED Scanning dimension scores 0 out of 10, and until that reaches 4, Production Readiness can't be rated higher than Adequate. The first actions are to resolve the 2 Leaked secret finding(s) in REDACTED Scanning and to resolve the 7 Low coverage finding(s) in Code Coverage, and if Production Readiness rose to 70, the score would rise from 52 to about 72.

15 findings are critical: seven in Secrets (history), five in IaC & Container Security, two in REDACTED Scanning and one in Circular Imports.

Watchdog couldn't measure 5 dimensions in this code, among them License Compliance, Internal API Consistency and Web-Security Posture, so they are left out of the score. The product code is 4,255 lines, which would take an estimated 0.1 person-years, around €5,600, to rebuild.

Code Health 71 Strong Architecture 78 Strong Maturity 69 Adequate, capped by Architecture documentation Production Readiness 26 Weak, capped by REDACTED Scanning, CI/CD gates and Security & performance tooling Security and Compliance 81 Adequate, capped by Secrets (history) Domain Modelling 100 ★ Exemplary Performance 100 ★ Exemplary

A lens is capped at Adequate while one of its dimensions scores below 4 out of 10, however well the rest of the lens does. That way a serious problem in one place always shows in the lens's rating.

How the score is built: what each lens counts for The lenses don't count equally. The weakest lens counts most, the next weakest a little less, and so on, so a weak area pulls the score down instead of being averaged away. In the bar below, each part's width shows how much that lens counts and its colour shows its rating. Improving the widest part moves the score most, and as that lens improves, it counts for less, because another lens becomes the weakest.
Production Readiness 26 · counts for 46%Maturity 69 · counts for 25%Code Health 71 · counts for 14%Architecture 78 · counts for 8%Security and Compliance 81 · counts for 4%Domain Modelling 100 · counts for 2%Performance 100 · counts for 1%

If Production Readiness rose from 26 to 70, the lowest score rated Strong, the score would rise from 52 to about 72.

Code composition: what the lines of code are
Product code 87%Tests 13%
New since the last survey: 5 findings

These 5 critical or serious findings weren't in the previous survey, on 8 October 2026.

Watchdog compares every finding with the previous survey's. A finding that has only moved to another line in the same file counts as the same finding, so only new findings appear here. Advisory notes from the AI model are left out, because the model words them afresh in every survey.

Fixed since the last survey: 17 findings

These 17 critical or serious findings were in the previous survey, on 8 October 2026, and are gone from this one.

  • Test Coverage · No test reaches this file src/application/shared/worker/models/BaseWorker.ts
  • Test Coverage · No test reaches this file src/domain/shared/utils/JSONfn.ts
  • Test Coverage · No test reaches this file src/infrastructure/middleware/logger/index.ts
  • Test Coverage · No test reaches this file src/adapters/repositories/container/index.ts
  • Test Coverage · No test reaches this file src/infrastructure/app/core/Modules.ts
  • Test Coverage · No test reaches this file src/adapters/shared/kernel/index.ts
  • Test Coverage · No test reaches this file src/infrastructure/config/Normalize.ts
  • Test Coverage · No test reaches this file src/adapters/repositories/trace/UseCaseTrace.repository.ts
  • Test Coverage · No test reaches this file src/adapters/controllers/base/context/HttpHeader.enum.ts
  • Test Coverage · No test reaches this file src/adapters/controllers/base/httpResponse/HttpStatusResolver.ts
  • Test Coverage · No test reaches this file src/adapters/controllers/base/context/HttpContentType.enum.ts
  • Test Coverage · No test reaches this file src/adapters/controllers/base/context/HttpMethod.enum.ts
  • Test Coverage · No test reaches this file src/application/shared/utils/AsyncUtil.ts
  • Test Coverage · No test reaches this file src/infrastructure/dataBases/container/index.ts
  • Test Coverage · No test reaches this file src/adapters/shared/httpClient/SerializationType.ts
  • Test Coverage · No test reaches this file src/adapters/providers/worker/models/TaskDictionary.ts
  • Test Coverage · No test reaches this file src/adapters/shared/ServiceContext.ts
Rebuild cost: about €5,600 · Estimate
Cost to rebuild€1,900 to €9,400, for 31 to 99 hours of work, about 0.1 person-years for one engineer
Difficulty of the problemStandard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write.
Quality factor×0.7 at a score of 52. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it.
SizeSmall: 4,255 lines of product code

How the estimate is made: Watchdog prices the hours a team would need to write this code again, at €60 to €95 an hour. Declarations and boilerplate are priced at a fast rate and logic at a slower one, and the logic is then multiplied by the difficulty of the problem and by the quality factor. The estimate can be about 30% off either way, and it moves most with the hourly rate and the difficulty. For this code, every line is priced as straight logic, which keeps the estimate on the low side.

Top priorities

The three actions that raise the score most for the work they take. The full ranked list is in the Roadmap.

1
Resolve the 2 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED (2).
Raises the score by about 22 points · Low effort · REDACTED Scanning
2
Resolve the 7 Low coverage finding(s) in Code Coverage — start with index.ts (4), Credentials.dto.ts, TokenDto.ts.
Raises the score by about 6 points · Low effort · Code Coverage
3
Resolve the 1 No ADRs found finding(s) in ADR Quality.
Raises the score by about 2 points · Low effort · ADR Quality

Diagnosis: what the measurements show together

Each conclusion below combines several dimensions into one point that no single dimension shows, and lists the measurements it rests on.

Where the investment is most exposed · Value at risk
This code would cost about €5,600 to build again, about 0.1 person-years of work. Its weakest lens is Production Readiness, at 26 (Weak). Production Readiness is about whether the product is ready to run in production and to change without breaking. Because the weakest lens counts most in the score, work on Production Readiness also moves the score most.
Based on: the rebuild estimate · the Production Readiness grade · how much each lens counts
What to do: Start with the Production Readiness actions in Top priorities.
If you do one thing first · First action
Resolve the 2 Leaked secret finding(s) in REDACTED Scanning. Of all the actions in this report, it raises the score most for the work it takes: about 22 points for low effort, because it clears the 2 REDACTED Scanning findings. The next survey will show the change in the score.
Based on: the ranked actions in Top priorities, by score gain and effort

Architecture: which parts of the code depend on which

The code is divided into modules, groups of code that each handle one part of the product, and a module depends on another when it uses code from it. The table lists the modules both down the side and across the top, in an order where each module should only use modules listed above it. A number in a cell means the module on that row uses the module in that column, and it counts the pairs of building blocks (types) that connect them. The one thing to look for is a mark above the diagonal line. It means two or more modules use each other in a loop (a dependency cycle), so none of them can be changed, tested or released on its own.

117 modules, with 150 dependencies between them. Every module uses only modules listed above it, so there are no loops.

The table shows the 40 modules with the most connections; 77 more are left out to keep it readable.

Which modules use which. The module on each row uses the module in each column, and the number counts the pairs of types that connect them. A cell above the diagonal is part of a loop.
uses →1 adapters.controllers.base.context.INextFunction2 adapters.controllers.base.context.IRouter3 adapters.shared.httpClient.BaseHttpClient4 application.mocks.builder.mockBuilder_mock5 application.shared.errors.ApplicationError6 application.shared.locals.LocaleType_enum7 application.shared.log.EventLog8 domain.session.ISession9 domain.user.IUser10 adapters.controllers.base.context.IRequest11 adapters.providers.log.ILogger12 application.modules.users.providerContracts.IUser_repository13 application.shared.log.UseCaseTrace14 application.shared.log.providerContracts.ILogProvider15 domain.user.User16 infrastructure.httpClient.HttpClient17 adapters.controllers.base.context.IResponse18 adapters.providers.base.Base_provider19 adapters.providers.log.Log_provider20 adapters.repositories.trace.IUseCaseTrace_repository21 adapters.repositories.user.IUser_model22 application.modules.auth.providerContracts.IAuth_provider23 application.modules.users.dtos.User_dto24 application.shared.useCase.BaseUseCase25 adapters.controllers.base.Base_controller26 adapters.providers.auth.Auth_provider27 adapters.providers.worker.Worker_provider28 adapters.repositories.trace.UseCaseTrace_repository29 adapters.repositories.user.User_repository30 application.modules.auth.useCases.login31 application.modules.auth.useCases.logout32 application.modules.status.useCases.default33 application.modules.status.useCases.pong34 application.modules.users.useCases.get35 application.modules.users.useCases.register36 application.shared.iterator.BaseIterator37 infrastructure.dataBases.nodeTsKeleton.User_model38 adapters.controllers.auth.Auth_controller39 adapters.controllers.status.Status_controller40 adapters.controllers.users.Users_controller
1 adapters.controllers.base.context.INextFunction
2 adapters.controllers.base.context.IRouter
3 adapters.shared.httpClient.BaseHttpClient
4 application.mocks.builder.mockBuilder_mock
5 application.shared.errors.ApplicationError
6 application.shared.locals.LocaleType_enum
7 application.shared.log.EventLog
8 domain.session.ISession
9 domain.user.IUser
10 adapters.controllers.base.context.IRequest11
11 adapters.providers.log.ILogger11
12 application.modules.users.providerContracts.IUser_repository1
13 application.shared.log.UseCaseTrace1
14 application.shared.log.providerContracts.ILogProvider11
15 domain.user.User11
16 infrastructure.httpClient.HttpClient2
17 adapters.controllers.base.context.IResponse1
18 adapters.providers.base.Base_provider1
19 adapters.providers.log.Log_provider1111
20 adapters.repositories.trace.IUseCaseTrace_repository1
21 adapters.repositories.user.IUser_model111
22 application.modules.auth.providerContracts.IAuth_provider11
23 application.modules.users.dtos.User_dto1
24 application.shared.useCase.BaseUseCase111
25 adapters.controllers.base.Base_controller111111
26 adapters.providers.auth.Auth_provider111111
27 adapters.providers.worker.Worker_provider1
28 adapters.repositories.trace.UseCaseTrace_repository11
29 adapters.repositories.user.User_repository1111
30 application.modules.auth.useCases.login111111
31 application.modules.auth.useCases.logout111111
32 application.modules.status.useCases.default111
33 application.modules.status.useCases.pong111
34 application.modules.users.useCases.get111111
35 application.modules.users.useCases.register11111111
36 application.shared.iterator.BaseIterator111
37 infrastructure.dataBases.nodeTsKeleton.User_model1111
38 adapters.controllers.auth.Auth_controller11111
39 adapters.controllers.status.Status_controller11111
40 adapters.controllers.users.Users_controller11111
Uses a module listed above itPart of a loopThe module itself
1 adapters.controllers.base.context.INextFunction2 adapters.controllers.base.context.IRouter3 adapters.shared.httpClient.BaseHttpClient4 application.mocks.builder.mockBuilder_mock5 application.shared.errors.ApplicationError6 application.shared.locals.LocaleType_enum7 application.shared.log.EventLog8 domain.session.ISession9 domain.user.IUser10 adapters.controllers.base.context.IRequest11 adapters.providers.log.ILogger12 application.modules.users.providerContracts.IUser_repository13 application.shared.log.UseCaseTrace14 application.shared.log.providerContracts.ILogProvider15 domain.user.User16 infrastructure.httpClient.HttpClient17 adapters.controllers.base.context.IResponse18 adapters.providers.base.Base_provider19 adapters.providers.log.Log_provider20 adapters.repositories.trace.IUseCaseTrace_repository21 adapters.repositories.user.IUser_model22 application.modules.auth.providerContracts.IAuth_provider23 application.modules.users.dtos.User_dto24 application.shared.useCase.BaseUseCase25 adapters.controllers.base.Base_controller26 adapters.providers.auth.Auth_provider27 adapters.providers.worker.Worker_provider28 adapters.repositories.trace.UseCaseTrace_repository29 adapters.repositories.user.User_repository30 application.modules.auth.useCases.login31 application.modules.auth.useCases.logout32 application.modules.status.useCases.default33 application.modules.status.useCases.pong34 application.modules.users.useCases.get35 application.modules.users.useCases.register36 application.shared.iterator.BaseIterator37 infrastructure.dataBases.nodeTsKeleton.User_model38 adapters.controllers.auth.Auth_controller39 adapters.controllers.status.Status_controller40 adapters.controllers.users.Users_controlleradapters.controllers.base.context.INextFunction1adapters.controllers.base.context.IRouter2adapters.shared.httpClient.BaseHttpClient3application.mocks.builder.mockBuilder_mock4application.shared.errors.ApplicationError5application.shared.locals.LocaleType_enum6application.shared.log.EventLog7domain.session.ISession8domain.user.IUser9adapters.controllers.base.context.IRequest10adapters.providers.log.ILogger11application.modules.users.providerContracts.IUser_repository12application.shared.log.UseCaseTrace13application.shared.log.providerContracts.ILogProvider14domain.user.User15infrastructure.httpClient.HttpClient16adapters.controllers.base.context.IResponse17adapters.providers.base.Base_provider18adapters.providers.log.Log_provider19adapters.repositories.trace.IUseCaseTrace_repository20adapters.repositories.user.IUser_model21application.modules.auth.providerContracts.IAuth_provider22application.modules.users.dtos.User_dto23application.shared.useCase.BaseUseCase24adapters.controllers.base.Base_controller25adapters.providers.auth.Auth_provider26adapters.providers.worker.Worker_provider27adapters.repositories.trace.UseCaseTrace_repository28adapters.repositories.user.User_repository29application.modules.auth.useCases.login30application.modules.auth.useCases.logout31application.modules.status.useCases.default32application.modules.status.useCases.pong33application.modules.users.useCases.get34application.modules.users.useCases.register35application.shared.iterator.BaseIterator36infrastructure.dataBases.nodeTsKeleton.User_model37adapters.controllers.auth.Auth_controller38adapters.controllers.status.Status_controller39adapters.controllers.users.Users_controller401111111111211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111+77 more modules (most-connected shown)

At a glance — Code Health · 71% · Strong ·

The Good
D1 · TypeScript Cyclomatic Complexity 9.6 D2 · TypeScript Cognitive Complexity 9.5 D3 · TypeScript God Classes 9.2 D17 · TypeScript Explicit Debt 10.0 GD1 · Repo Unfinished & placeholder code 10.0 IC1 · Repo Incompleteness & stubs 10.0 R1 · React / TS Type Safety 10.0 R10 · React / TS Code Duplication 8.7 R2 · React / TS Cyclomatic Complexity 10.0 R3 · React / TS Large Files 10.0 X1 · Repo Async correctness 10.0 X12 · Repo Unreachable branch 10.0 X13 · Repo Undrained process stream 10.0 X16 · Repo Unfloored truncation loop 10.0 X18 · Repo Disposal-pattern correctness 10.0 X19 · Repo Unrestored process-global state 10.0 X21 · Repo Side-effecting pattern guard 10.0 X22 · Repo Contradicted release guard 10.0 X23 · Repo Unguarded diagnostic materialisation 10.0 X25 · Repo Inert configuration knob 10.0 X28 · Repo Index access outside its own emptiness guard 10.0 X29 · Repo Per-element action decided by a fixed element 10.0 X3 · Repo Exception handling 10.0 X30 · Repo Support guard that admits what it rejects 10.0 X5 · Repo Nullable reference types 7.3
The Bad
R7 · React / TS Dead Code 5.9
The Ugly
X2 · Repo Cancellation propagation 4.0

At a glance — Architecture · 78% · Strong ·

The Good
D5 · TypeScript Coupling 10.0 D6 · TypeScript Cohesion (LCOM4) 9.3 D26 · TypeScript Project Cohesion 10.0 D27 · TypeScript Navigability 8.6 D35 · TypeScript Change Coupling 9.8 AX3 · Repo Project dependency cycles 10.0 AX4 · Repo Dependency direction 10.0 AX5 · Repo Architecture & structure 10.0 AX6 · Repo Interface segregation 10.0 R11 · React / TS Import Boundaries 10.0 R9 · React / TS Circular Imports 8.1
The Ugly
AX10 · Repo Code composition 4.0

At a glance — Maturity · 69% · Adequate · gated by M2 ·

The Good
D15 · TypeScript Churn × Complexity Hotspots 10.0 D21 · TypeScript Naming Consistency 10.0 D34 · TypeScript Knowledge Freshness 8.9 M1 · Repo Documentation (README) 10.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0
The Ugly
D19 · TypeScript Documentation Quality 2.0 D20 · TypeScript ADR Quality 0.0 M2 · Repo Architecture documentation 2.0

At a glance — Readiness · 26% · Weak · gated by D13, P1, P3 ·

The Good
D9 · TypeScript Test Distribution 10.0 D10 · TypeScript Test Quality 10.0 D11 · TypeScript Test Reliability 10.0 P10 · Repo Library API & versioning 10.0 P2 · Repo Observability 7.0 P9 · Repo Domain vs controller coverage 9.2 R6 · React / TS Tooling 10.0 R8 · React / TS Dependency Hygiene 9.5
The Bad
D8 · TypeScript Code Coverage 5.0 P4 · Repo Deployment & Rollback 5.0
The Ugly
D13 · TypeScript REDACTED Scanning 0.0 P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0 R4 · React / TS Test Coverage 4.1

At a glance — Security · 81% · Adequate · gated by D28 ·

The Good
D29 · TypeScript Static Analysis (SAST) 9.5 D30 · TypeScript Dependency Vulnerabilities 10.0 D31 · TypeScript IaC & Container Security 8.0 D43 · TypeScript Malicious Dependencies 10.0 D44 · TypeScript Platform End-of-Life 10.0 X14 · Repo Bypassable address classification 10.0 X15 · Repo Unvalidated length from an untrusted reader 10.0 X17 · Repo Uncapped recursion over a caller-supplied document 10.0 X24 · Repo Document value interpolated into markup unescaped 10.0
The Ugly
D28 · TypeScript Secrets (history) 3.0

At a glance — Domain Modelling · 100% · Exemplary ·

The Good
DM6 · Repo Domain ↔ infrastructure boundary 10.0 DM9 · Repo Scattered domain decisions 10.0

At a glance — Performance · 100% · Exemplary ·

The Good
PF3 · Repo Async & latency hygiene 10.0

Security & Compliance — OWASP Top-10 mapping

Findings mapped to OWASP categories; the specific CVEs/secrets are in the Security dimension cards below and findings.md (redacted only on the public version of this report).

OWASP categoryFindingsSeverity
A02:2025 — Security Misconfiguration11High / Critical
A07:2025 — Authentication Failures10High / Critical
A05:2025 — Injection1Medium
A03:2025 — Software Supply Chain Failures1Medium
A08:2025 — Software or Data Integrity Failures1Medium

Roadmap

Immediately resolve the two leaked secrets in REDACTED and address the seven low-coverage areas in index.ts, Credentials.dto.ts, and TokenDto.ts. Establish a CI workflow to build and test on every push, integrating security tooling to fail the build on regressions. Finally, document architectural decisions by creating the required ADRs.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do thisHelpsEffortDimension
Resolve the 2 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED (2).+22.1 ptsLowREDACTED Scanning
Resolve the 7 Low coverage finding(s) in Code Coverage — start with index.ts (4), Credentials.dto.ts, TokenDto.ts.+5.7 ptsLowCode Coverage
Resolve the 1 No ADRs found finding(s) in ADR Quality.+2.4 ptsLowADR Quality
Add a CI workflow that builds and runs the test suite on every push/PR.+4.7 ptsMediumCI/CD gates
Run what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.+4.7 ptsMediumSecurity & performance tooling
Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.+2.3 ptsMediumArchitecture documentation
Improve Documentation Quality — currently 2.0/10.+2.3 ptsMediumDocumentation Quality
Add tests that import the unreached modules (directly or through their public entry).+1.9 ptsMediumTest Coverage

File quality

Per-file score 0–10 — a quality signature. Of 19 files carrying findings, judged against the Production bar: 11% slop · 31% mixed · 58% near-clean.

FileScoreBandWorst signal
REDACTED0.9SlopREDACTED Scanning: Leaked secret: REDACTED
REDACTED3.4SlopIaC & Container Security: High IaC: REDACTED
REDACTED4.1MixedIaC & Container Security: High IaC: REDACTED
REDACTED5.1MixedIaC & Container Security: High IaC: REDACTED
REDACTED5.8MixedSecrets (history): REDACTED: REDACTED
REDACTED5.8MixedSecrets (history): REDACTED: REDACTED
src/infrastructure/httpClient/HttpClient.ts7.4MixedCyclomatic Complexity: HttpClient.formData (cyclomatic 20)
REDACTED7.9MixedStatic Analysis (SAST): Medium: REDACTED
src/adapters/repositories/trace/UseCaseTrace.repository.ts8.2Near-cleanExplicit Debt: TodoComment
src/application/shared/log/UseCaseTrace.ts8.5Near-cleanCohesion (LCOM4): Low cohesion: UseCaseTrace (LCOM4 4)
src/application/modules/auth/dtos/Credentials.dto.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/auth/dtos/Credentials.dto.ts
src/application/modules/auth/dtos/TokenDto.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/auth/dtos/TokenDto.ts
src/application/modules/auth/useCases/login/index.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/auth/useCases/login/index.ts
src/application/modules/auth/useCases/logout/index.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/auth/useCases/logout/index.ts
src/application/modules/users/dtos/User.dto.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/users/dtos/User.dto.ts
src/application/modules/users/useCases/get/index.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/users/useCases/get/index.ts
src/application/modules/users/useCases/register/index.ts8.5Near-cleanCode Coverage: Low coverage: src/application/modules/users/useCases/register/index.ts
src/adapters/providers/worker/Worker.provider.ts8.5Near-cleanChange Coupling: Change coupling: Worker.provider.ts ↔ index.ts
src/adapters/repositories/user/User.repository.ts8.5Near-cleanChange Coupling: Change coupling: User.repository.ts ↔ index.ts

How the grades work

Every finding carries one of four grades. Three say how serious it is. The fourth says this survey could not settle it — and it is a grade, not a gap.

Critical — 15

A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.

Serious — 83

Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.

Minor — 28

Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.

Could not be resolved — 7

Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 72 of 75 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 75 dimensions across the health lenses
D1D2D3D5D6D8D9D10D11D13D15D17D19D20D21D26D27D28D29D30D31D34D35D43D44AX10AX3AX4AX5AX6DM6DM9GD1IC1M1M2M3M4P1P10P2P3P4P9PF3R1R10R11R2R3R4R6R7R8R9X1X12X13X14X15X16X17X18X19X2X21X22X23X24X25X28X29X3X30X5

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions
  1. Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 111 of 126 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
  2. Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
  3. Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

MethodBacksVersionEvaluator
Roslyn static analysisComplexity, cohesion, coupling, dead code, API surface, layering5.3.0✓ deterministic
Native secret scannerHardcoded secrets / credentials1.0.0✓ deterministic
Watchdog duplication detector (in-process)Code duplication1.0.0✓ deterministic
Coverage (coverlet / dotnet-coverage)Line & branch coverage10.0.400✓ deterministic
NuGet / dotnetOutdated, vulnerable & deprecated dependencies10.0.400✓ deterministic
git / LibGit2SharpChurn hotspots, knowledge concentration, history2.43.0 · 0.31.0✓ deterministic
gitleaks · semgrep · trivy · checkovSecrets in history, SAST, CVEs, IaC & container, PII / GDPR1.86.0 · 0.69.3 · 3.2.533✓ deterministic
LLM (sampled · advisory)Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurementLocal LLM◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 01a16429-6a82-76a3-ba48-3a4e2297e15c.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

  • D12 Dependency Hygiene — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. This repository's 2 package.json manifest(s) WERE read and their pinning discipline assessed; what went unanswered is the currency half, because answering it needs a lockfile resolved to CONCRETE versions and this repository commits none — a package.json states version RANGES, and a range names no particular release to be behind. So registry.npmjs.org was never asked, and there was nothing here for it to grade. This is a true statement about the repository and NOT a gap on our side: no lockfile reader we could write would find anything here to read, so there is no capability behind this row to build.
  • D14 License Compliance — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Not scored — this repository declares package.json manifests but commits no lockfile this pass can resolve (npm, pnpm, yarn and bun each write a different one, and `bun.lockb` is a binary format with no published shape), so the set of packages it actually ships is not resolvable from the checkout: its declarations carry version RANGES, and grading whichever release happens to be newest today would be a verdict about a dependency graph this repository has not pinned. Commit the lock and this dimension grades its production dependencies against registry.npmjs.org. NOT a finding that this repository's licences are compliant: this dimension asserts nothing about its licensing in either direction.
  • D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: it declares a published package (package.json), but no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict. For npm the surface is what a published package.json's entry points (exports, main, module, types) export, followed through the source; an entry that names build output the tree does not commit (dist/, build/) is not followed back to source, because only a tsconfig outDir/rootDir pair states that mapping and a bundler's input lives in executable configuration this engine does not evaluate.
  • D30 Dependency Vulnerabilities — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The scanner produced no output at all, so no dependency was actually scanned. 1 of 2 declared ecosystem(s) (npm) WERE scanned and every vulnerability they reported is included in this result; REDACTED was not, so this dimension's score covers less than the dependency surface this repository declares, and nothing here is evidence that REDACTED is free of known-vulnerable dependencies.
  • D32 Data Compliance (PII/GDPR) — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `src/infrastructure/config/Normalize.ts` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
  • D43 Malicious Dependencies — measured, with a gap in what it reached — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. The scanner produced no output at all, so no dependency was actually scanned. 1 of 2 declared ecosystem(s) (npm) WERE scanned and every vulnerability they reported is included in this result; REDACTED was not, so this dimension's score covers less than the dependency surface this repository declares, and nothing here is evidence that REDACTED is free of known-vulnerable dependencies.
  • AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DockerCompose (compose.yaml). compose up failed (exit 14 — a file the compose project references is missing) — time="2026-10-22T15:10:05Z" level=warning msg="The \"JWT_SECRET_KEY\" variable is not set. Defaulting to a blank string." env file .env not found: stat .env: no such file or directory; runtime evidence skipped.
  • DM9 Scattered domain decisions — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Arm two tells a construction that PRODUCES a measurement from one that merely passes it along, and this repository's frontend does not compute that fact. A measurement built independently in two places would not appear above.
  • R4 Test Coverage — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. 17 further occurrence(s) are not listed individually; the score already reflects all 57.
  • S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 125 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled certificate validation and obsolete TLS versions, and none was found. The server controls this dimension also scores were not assessed, so no score is given.
  • X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded, and this repository's JavaScript/TypeScript, Python and PHP log through no library that carries a message's values as fields (pino, winston, bunyan, tslog, LogTape, roarr; Python's logging, structlog; PHP's PSR-3 loggers), so its log calls cannot be judged, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.

Repo exclusion declarations: 6 pattern(s) declared (.gitattributes linguist-generated/vendored, .editorconfig generated_code) excluded 0 source file(s) from code-quality scoring. Declarations are the repo's own visible statement that a tree is machine-written or vendored — auditable in any diff, honored by GitHub the same way.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

  • D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
  • D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
  • D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
  • D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
  • D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
  • D8 Code Coverage: Coverage is measured by building and running the test suite inside Watchdog's isolated image — the target repo is never modified, and nothing on your systems runs. So coverage exists only when the suite builds and runs within the inline time budget; one that needs external services, can't build, or exceeds the budget yields no coverage (D8 then degrades to not-measured, not a low score). Line coverage also says nothing about assertion quality.
  • D9 Test Distribution: The test-pyramid shape is inferred from project/folder naming and references, with a single test host bucketed per-file by its path tier and content signals — a suite that names tiers unconventionally and gives no per-file signal can still be mis-bucketed.
  • D10 Test Quality: Assertion density is structural — it cannot tell a meaningful behavioural assertion from a trivial one, only that an assertion is present.
  • D11 Test Reliability: Flakiness is inferred from history/markers — Watchdog runs the suite once (for coverage), not the repeated runs under varied conditions that reveal nondeterminism, so a flaky test never recorded as failing is invisible here.
  • D13 REDACTED Scanning: REDACTED detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
  • D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
  • D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
  • D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
  • D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
  • D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
  • D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
  • D27 Navigability: Indirection/navigability is structural — it measures hops to follow a call, not whether that indirection buys real flexibility or just ceremony.
  • D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
  • D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
  • D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
  • D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
  • D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
  • D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
  • D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
  • D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a REDACTED (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
  • AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
  • DM6 Domain ↔ infrastructure boundary: Infrastructure reached through a hand-rolled wrapper, a domain-named facade, reflection, or a string-keyed service locator resolves to a non-infra type and isn't seen; the body scan is symbol resolution over syntax, not full dataflow. A clean result means "no resolved infra reference in a domain body", not a proof of purity.
  • M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
  • P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score; each names its own sample and method on its card. They are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D1 · Cyclomatic Complexity9.6 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: How tangled the control flow is — methods with many branches are hard to test and change.

Method: Cyclomatic complexity per method (1 + decision points), computed exhaustively across production source; test projects separated by convention. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.6 / 10 · rule-coverage 100% · ceiling Prevented

1 method(s) exceeded the cyclomatic complexity threshold of 15; the worst was HttpClient.formData at 20.

HttpClient.formData (cyclomatic 20)src/infrastructure/httpClient/HttpClient.ts:75

What to do

  1. Bring the 1 body over 15 down to 15 or less in Cyclomatic Complexity — start with HttpClient.formData (cyclomatic 20). — Refactoring it lifts Cyclomatic Complexity from 9.6 to about 10.0/10.
  2. Stand up a CI pipeline, then gate Cyclomatic Complexity in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d1_recommendation.md · top locations in Appendix A, every location in findings.md.

D2 · Cognitive Complexity9.5 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: How hard the code is for a person to follow, beyond raw branching.

Method: Cognitive complexity per method (Sonar-style nesting-penalized score), computed exhaustively over production code, excluding test projects. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Prevented

1 method(s) exceeded the cognitive complexity threshold of 15; the worst was HttpClient.formData at 23.

HttpClient.formData (cognitive 23)src/infrastructure/httpClient/HttpClient.ts:75

What to do

  1. Bring the 1 body over 15 down to 15 or less in Cognitive Complexity — start with HttpClient.formData (cognitive 23). — Refactoring it lifts Cognitive Complexity from 9.5 to about 10.0/10.
  2. Stand up a CI pipeline, then gate Cognitive Complexity in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d2_recommendation.md · top locations in Appendix A, every location in findings.md.

D3 · God Classes9.2 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 9.2 / 10 · rule-coverage 100% · ceiling Prevented

1 over-large unit(s) detected — types, modules or files that carry too much.

MethodTooLong: HttpClient.formDatasrc/infrastructure/httpClient/HttpClient.ts:75

What to do

  1. Resolve the 1 MethodTooLong finding(s) in God Classes — start with HttpClient.ts. — One of this dimension's main actionable groups (1 warning-level).
  2. Stand up a CI pipeline, then gate God Classes in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d3_recommendation.md · top locations in Appendix A, every location in findings.md.

D5 · Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether volatile projects sit underneath others that depend on them (so their churn ripples upward), and whether project dependencies form cycles. A widely-depended-on but stable shared/kernel project is healthy, not penalised.

Method: Dependency cycles via elementary-DFS over real .csproj references, plus Martin instability (afferent/efferent) per project. Exhaustive over the reference graph, deterministic.

Coverage: Exhaustive · type-level: afferent/efferent coupling + cycles computed over every production type — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

2 production modules (npm), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 0 module(s) off the main sequence.

✓ On the Gold path — maintain.

Detailed fixes: d5_recommendation.md.

D6 · Cohesion (LCOM4)9.3 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Whether a class's methods are focused on a single responsibility.

Method: LCOM4 cohesion per production class with at least two methods: connected components of methods sharing state or calls, computed syntactically. Deterministic, not a proxy.

Coverage: Exhaustive · type-level: LCOM4 cohesion computed over every production class — the population is all types, not a name convention.

Maturity: Documented → Verified → Prevented · effective 9.3 / 10 · rule-coverage 100% · ceiling Verified

1 of 18 classes have LCOM4 above 3.

Low cohesion: UseCaseTrace (LCOM4 4)src/application/shared/log/UseCaseTrace.ts:18

What to do

  1. Resolve the 1 Low cohesion finding(s) in Cohesion (LCOM4) — start with UseCaseTrace.ts. — One of this dimension's main actionable groups (1 warning-level).
  2. Stand up a CI pipeline, then gate Cohesion (LCOM4) in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d6_recommendation.md · top locations in Appendix A, every location in findings.md.

D8 · Code Coverage5.0 / 10Adequate✓ Tool-verified

What it measures: How much of the code is actually exercised by tests.

Method: Coverage from coverlet runs or committed reports (Cobertura/OpenCover/lcov), computed per-file with structured exclusions for generated, trivial, and glue code. When the suite can't be built/run in-image AND no report is committed, coverage is reported NOT-MEASURED (excluded from the score) with the precondition to make it measurable — never a LoC-ratio proxy folded in as if measured. Deterministic.

Maturity: Documented → Verified → Prevented · effective 5.0 / 10 · rule-coverage 100% · ceiling Verified

Line coverage 21.6% — 7 file(s) below 50%. Measured from the JavaScript/TypeScript suite (jest via `npm install --ignore-scripts` (no lockfile) in the repository root).

Low coverage: src/application/modules/auth/dtos/Credentials.dto.ts · ×7src/application/modules/auth/dtos/Credentials.dto.ts:1

What to do

  1. Resolve the 7 Low coverage finding(s) in Code Coverage — start with index.ts (4), Credentials.dto.ts, TokenDto.ts. — One of this dimension's main actionable groups (7 warning-level).
  2. Stand up a CI pipeline, then gate Code Coverage in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Verified — provenance only; does not change the score.

Detailed fixes: d8_recommendation.md · top locations in Appendix A, every location in findings.md.

D9 · Test Distribution10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the test suite has a healthy mix of unit / integration / end-to-end tests.

Method: Test projects classified (Unit/Integration/BDD/E2E) from compiled metadata; test methods counted exhaustively across projects with placement-agnostic disk fallback. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

25 test methods: 25 unit, 0 integration, 0 BDD, 0 e2e. The JavaScript/TypeScript suite contributes 25 `it`/`test` case(s) across 8 test file(s) declaring at least one; its tier split is read from package names and paths only.

✓ On the Gold path — maintain.

Detailed fixes: d9_recommendation.md.

D10 · Test Quality10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the tests truly assert behaviour rather than just running the code.

Method: Per-test assertions, skips, and mock references analyzed via Roslyn; structured skip-reason tags (BUG:/ENV:) separate documented deferrals from debt. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 skipped, 0 zero-assertion, no mocking-framework packages referenced (hand-written doubles or no mocking) across 25 tests.

✓ On the Gold path — maintain.

Detailed fixes: d10_recommendation.md.

D11 · Test Reliability10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether the tests pass reliably, with no flakiness.

Method: Suite re-run N times within tiered wall-clock budgets (unit to e2e); tests failing non-deterministically across runs flagged; guarded tests retried when #if guards detected.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 flaky across 1 measured tier(s). JavaScript/TypeScript (jest via `npm install --ignore-scripts` (no lockfile) in the repository root (8 tests)): measured (0 flaky).

✓ On the Gold path — maintain.

Detailed fixes: d11_recommendation.md.

D13 · REDACTED Scanning0.0 / 10Critical✓ Tool-verified

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Prevented

2 secret(s) detected.

REDACTED

What to do

  1. Resolve the 2 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED (2). — One of this dimension's main actionable groups (2 issue-level).
  2. Stand up a CI pipeline, then gate REDACTED Scanning in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d13_recommendation.md · top locations in Appendix A, every location in findings.md.

D15 · Churn × Complexity Hotspots10.0 / 10Exemplary✓ Tool-verified

What it measures: Files that change often and are also complex — the riskiest hotspots.

Method: Per production file churn times cyclomatic complexity over a rolling window, computed from git and Roslyn/JS/Razor analysis. Exhaustive, deterministic per commit date.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No churn × complexity hotspots in the window.

✓ On the Gold path — maintain.

Detailed fixes: d15_recommendation.md.

D17 · Explicit Debt10.0 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Acknowledged debt left in the code — TODOs, dead code, suppressed warnings.

Method: Roslyn syntactic debt markers (suppressions/TODO/FIXME/HACK/empty-catch/commented-code/Obsolete) plus SymbolFinder dead-code analysis; weighted-debt-per-KLoC density deducted 2.0x per unit. Deterministic, exhaustive.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

1 deducted task-comment markers across 4225 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.

TodoCommentsrc/adapters/repositories/trace/UseCaseTrace.repository.ts:7

What to do

  1. Resolve the 1 TodoComment finding(s) in Explicit Debt — start with UseCaseTrace.repository.ts. — One of this dimension's main actionable groups (1 warning-level).
  2. Stand up a CI pipeline, then gate Explicit Debt in it to reach Verified (currently Documented). — This repository has no CI pipeline, so there is nothing to add a gate to yet — the pipeline comes first. Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.

Detailed fixes: d17_recommendation.md · top locations in Appendix A, every location in findings.md.

D19 · Documentation QualityCritical◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Critical / 10 · rule-coverage 100% · ceiling Documented

The repository's documentation consists of only README files (no architecture or design docs) and no XML-doc coverage. The READMEs are thin but each one is a directory README for its own deploy tier; they all describe what the directory contains without stating what the project as a whole does, installing it, using it, contributing to it, or licensing it.

What to do

  1. Improve Documentation Quality — currently 2.0/10. — The repository's documentation consists of only README files (no architecture or design docs) and no XML-doc coverage. The READMEs are thin but each one is a directory README for its own deploy tier; they all describe what the directory contains without stating what the project as a whole does, installing it, using it, contributing to it, or licensing it.

Detailed fixes: d19_recommendation.md.

D20 · ADR Quality0.0 / 10Critical✓ Tool-verified

What it measures: Whether architecture decisions are recorded well (context, decision, consequences).

Method: Per-ADR judgment by language model at low temperature with two-pass stability; confidence is share of ADRs evaluated; enforcement-field presence detected deterministically. Advisory.

Maturity: Documented → Verified → Prevented · effective 0.0 / 10 · rule-coverage 100% · ceiling Documented

No architecture decision records were found.

No ADRs found

What to do

  1. Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d20_recommendation.md · top locations in Appendix A, every location in findings.md.

D21 · Naming ConsistencyExemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

D26 · Project Cohesion10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether each project is a focused, coherent unit rather than an oversized grab-bag.

Method: Project size overshoot penalties (LoC / public-type count / namespace count, 2-of-3 flag) weighted by log magnitude. Exhaustive across projects, deterministic, LLM-independent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 of 2 build units (npm) flagged as possibly oversized/incoherent.

✓ On the Gold path — maintain.

Detailed fixes: d26_recommendation.md.

D27 · Navigability8.6 / 10Strong✓ Tool-verified

What it measures: How far you must trace to follow a call — low indirection and co-located slices read easier.

Method: Call indirection (interface hops, cross-namespace calls, slice-locality scaled) over a sampled set of method invocations, size-aware baseline. Sampled; confidence discounted by symbol-resolution gaps. C# also names each pass-through layer (a class whose every public method only forwards its own parameters to one collaborator) as a located finding; the score is not affected.

Coverage: Slice locality from the first namespace segments, SAMPLED (≤400 methods) — not exhaustive.

Maturity: Documented → Verified → Prevented · effective 8.6 / 10 · rule-coverage 100% · ceiling Documented

67 % of calls cross a namespace and 9 % go through an interface, but 72 % of collaborators are co-located — so following a call takes several hops. Baseline: small — navigation cost is tolerated.

What to do

  1. Improve Navigability — currently 8.6/10. — 67 % of calls cross a namespace and 9 % go through an interface, but 72 % of collaborators are co-located — so following a call takes several hops. Baseline: small — navigation cost is tolerated.

Detailed fixes: d27_recommendation.md.

D28 · Secrets (history)3.0 / 10Weak✓ Tool-verified

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: REDACTED scan via TWO gitleaks detect passes in an isolated checkout — the full git history, then a second --no-git pass over the working tree as it stands — merged and de-duplicated by (rule, file, line); each match flagged High. Both invocations are recorded in the audit trail. Exhaustive; when the tool is absent, or when its output cannot be parsed into the expected shape, the dimension is WITHHELD as an explicit measurement gap on our side — unscored and excluded from the lens, never a hedged middling score.

Maturity: Documented → Verified → Prevented · effective 3.0 / 10 · rule-coverage 100% · ceiling Documented

7 finding(s): 0 critical, 7 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.

REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 4 REDACTED finding(s) in Secrets (history) — start with REDACTED (2), REDACTED (2). — One of this dimension's main actionable groups (4 issue-level).
  2. Resolve the 3 High secret finding(s) in Secrets (history) — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
  3. Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d28_recommendation.md · top locations in Appendix A, every location in findings.md.

D29 · Static Analysis (SAST)9.5 / 10Stronggated by 1 serious finding✓ Tool-verified

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 9.5 / 10 · rule-coverage 100% · ceiling Documented

1 finding(s): 0 critical, 0 high, 1 medium, 0 low. semgrep hit a parse error in 1 file(s) — `src/infrastructure/config/Normalize.ts` (line 3) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them.

REDACTED

What to do

  1. Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).

Detailed fixes: d29_recommendation.md · top locations in Appendix A, every location in findings.md.

D30 · Dependency Vulnerabilities10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any dependency has a known published vulnerability (CVE), direct or transitive, in ANY ecosystem the repository declares — Dart pub, Elixir and Erlang via Hex, Go modules, Java and Kotlin via Maven/Gradle, JavaScript/npm, .NET/NuGet, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift.

Method: Dependency-CVE scan across every ecosystem the repository declares, scored ONCE. Three sources are unioned and deduplicated by advisory identity (rule id + alias closure, CVE<->GHSA) scoped to package+version, keeping the worst severity: `osv-scanner --recursive` over REDACTED.dev for Dart pub, Elixir/Hex (and Erlang, whose `rebar.lock` syft first converts to a CycloneDX SBOM the scanner reads, with rows attributed back to the lock), Go, Java and Kotlin via Maven/Gradle (and Scala, whose sbt build's pinned direct declarations are written into a CycloneDX SBOM the scanner reads, with rows attributed back to the build file), npm, PHP/Composer, Python/PyPI, RubyGems, Rust/Cargo and Swift; `trivy fs --scanners vuln` for npm lockfiles; and `dotnet list package --vulnerable --include-transitive` for NuGet (with per-advisory collapse of the project x target-framework fan-out), plus a DECLARED-dependency arm that resolves a published gem's gemspec against rubygems.org where no Gemfile.lock is committed. `SeverityScore(c,h,m,l, normalizer 8.0)`. NotApplicable only when NO ecosystem is readable; if any applicable ecosystem could not be scanned the findings are REPORTED and the score is withheld. Supersedes the npm and OSV arms, retired 2026-09-05.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No known-vulnerable dependencies in the 1 ecosystem(s) that were scanned (npm). Partial dependency scan: 1 of 2 declared ecosystem(s) were scanned (npm), and the findings above are real and complete for them. REDACTED was not scanned (REDACTED: the scanner produced no output at all, so no dependency was actually scanned), so this is not the whole dependency surface and the result is reported at reduced confidence.

REDACTED

✓ On the Gold path — maintain.

Detailed fixes: d30_recommendation.md · top locations in Appendix A, every location in findings.md.

D31 · IaC & Container Security8.0 / 10Adequategated by 5 critical findings✓ Tool-verified

What it measures: Whether Dockerfiles / Terraform / Kubernetes config follow security best practices.

Method: IaC/container misconfiguration scan via trivy config (REDACTED/Terraform/K8s/Helm/CloudFormation); severity rules to 0-10 moderate normalizer. NotApplicable without manifests. Exhaustive, deterministic.

Maturity: Documented → Verified → Prevented · effective 8.0 / 10 · rule-coverage 100% · ceiling Documented

11 finding(s): 0 critical, 5 high, 3 medium, 3 low.

REDACTED
REDACTED
REDACTED

What to do

  1. Resolve the 5 High IaC finding(s) in IaC & Container Security — start with REDACTED (3), REDACTED (2). — One of this dimension's main actionable groups (5 issue-level).
  2. Resolve the 3 Medium IaC finding(s) in IaC & Container Security — start with REDACTED (3). — One of this dimension's main actionable groups (3 warning-level).
  3. Resolve the 3 Low IaC finding(s) in IaC & Container Security — start with REDACTED (3). — One of this dimension's main actionable groups (3 recommendation-level).

Detailed fixes: d31_recommendation.md · top locations in Appendix A, every location in findings.md.

D34 · Knowledge Freshness8.9 / 10Strong✓ Tool-verified

What it measures: Whether anyone still has living knowledge of each file, or it has been orphaned — last understood long ago by someone now gone quiet. The sibling of the bus factor: D16 asks who owns it, D34 asks whether anyone still knows it.

Method: File orphaning as total living-knowledge decay below one focused-commit's worth within a year, computed per-file from the D16 decay model. Exhaustive, deterministic over fixed history.

Maturity: Documented → Verified → Prevented · effective 8.9 / 10 · rule-coverage 100% · ceiling Documented

1 of 13 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is src/application/modules/auth/useCases/logout/index.ts. Counted over 13 of the 128 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.

Orphaned files with no living knowledge
Orphaned filesrc/application/modules/auth/useCases/logout/index.ts:1

What to do

  1. Resolve the 1 Orphaned files with no living knowledge finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
  2. Resolve the 1 Orphaned file finding(s) in Knowledge Freshness — start with index.ts. — One of this dimension's main actionable groups (1 recommendation-level).

Detailed fixes: d34_recommendation.md · top locations in Appendix A, every location in findings.md.

D35 · Change Coupling9.8 / 10Stronggated by 2 serious findings✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling. A non-source file is never a coupling PARTICIPANT either: documentation, schemas, config and data files are dropped with the rest, so a code↔docs pair — a command and the reference page that restates it — is not reported however strongly the two co-change; nor is coupling that runs THROUGH a build step or config file.

Maturity: Documented → Verified → Prevented · effective 9.8 / 10 · rule-coverage 100% · ceiling Documented

Strongest change-coupling: Worker.provider.ts↔index.ts 60%; User.repository.ts↔index.ts 58%

Change coupling: Worker.provider.ts ↔ index.ts · ×2src/adapters/providers/worker/Worker.provider.ts:1

What to do

  1. Resolve the 2 Change coupling finding(s) in Change Coupling — start with Worker.provider.ts, User.repository.ts. — One of this dimension's main actionable groups (2 warning-level).

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

D43 · Malicious Dependencies10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether any dependency the repository declares is published as MALICIOUS rather than merely vulnerable — a package that is an attacker's work, in any ecosystem osv-scanner reads. Scored apart from D30 because the answer is binary: there is no safe version to upgrade to, and the fix is to remove the package and rotate every credential it could have read.

Method: The same dependency scan D30 reads, partitioned on the scanner's own classification rather than rescanned: a row is MALICIOUS when its id is in the `MAL-` space (the ossf/malicious-packages feed) OR its `database_specific.cwe_ids` carries `CWE-506` ("Embedded Malicious Code"). Both channels are structural; the summary text is deliberately NOT read, because a malicious-package record whose summary says only "Critical severity vulnerability" is a real shape ([GHSA redacted]) and a text matcher misses it. Scored BINARY: any surviving row is 0, whatever its severity and however many CVEs sit beside it — a hostile dependency is not a quantity. Applicability and degradation are D30's: NotApplicable only when no ecosystem is readable, and an unscannable ecosystem degrades rather than reading clean. SCORED, not informational.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No known-vulnerable dependencies in the 1 ecosystem(s) that were scanned (npm). Partial dependency scan: 1 of 2 declared ecosystem(s) were scanned (npm), and the findings above are real and complete for them. REDACTED was not scanned (REDACTED: the scanner produced no output at all, so no dependency was actually scanned), so this is not the whole dependency surface and the result is reported at reduced confidence.

REDACTED

✓ On the Gold path — maintain.

Detailed fixes: d43_recommendation.md · top locations in Appendix A, every location in findings.md.

D44 · Platform End-of-Life10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether anyone still ships security patches for the platform this repository RUNS ON — the runtime it pins and the framework majors its own constraints hold it to. Separate from D12 because the question differs: a current Django on an end-of-life Python is perfectly up to date and completely unsupported, and the fix is a migration rather than a version bump. What the repository says it merely SUPPORTS is never charged.

Method: End-of-life PLATFORM read from the repository's own declarations and graded against a FROZEN, dated table of vendor support dates — no network, no feed, no API, so this dimension answers identically inside a closed scan fence. Two subjects: a RUNTIME the project pins (a single or all-end-of-life TargetFramework, a .nvmrc or .python-version, a requires-python CAP) and a FRAMEWORK major a dependency constraint cannot move off (a caret, tilde or exact version; `vue@^2.7.16` pins Vue 2). A FLOOR is deliberately never charged — `requires-python = ">=3.8"` states what a package SUPPORTS, not what it runs on — and a multi-target project is charged only when EVERY target is out of support. Runtime 4.0/product capped 8.0, framework 1.5 capped 4.5. The table is safe to freeze because a statement about support that ended in the past cannot become false: it loses recall as it ages, never precision, and a test asserts every entry predates the freeze date. Disjoint from D31 (a container image's OS layer) and D29 (the toolchain a CI workflow installs). Abstains when the repository declares no platform this pass reads — never scores it clean.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 0 platform declaration(s) and 16 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.

✓ On the Gold path — maintain.

Detailed fixes: d44_recommendation.md.

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX10 · Code composition4.0 / 10Weak✓ Tool-verified

Other · Architecture — How the codebase splits by code ROLE — domain, application, infrastructure, test, generated. The significance map behind the knowledge/coupling weighting, and a DDD signal in its own right: a thin domain core under fat infrastructure is the anemic-domain smell, quantified. How each file's role is decided, because the split is only as good as that: a generated name or a build-output tree makes it Generated, a test project makes it Test, and otherwise the file's NAMESPACE and PATH words are matched against fixed vocabularies in a fixed ORDER — domain, then infrastructure, then application — so a file whose words hit two layers is counted under the earlier one. A production file matching none of them counts as application, so that share reads 'application or unclassified' rather than a measured application layer. Roles come from naming convention, never from what the code does. On this repository the split was taken from the source tree on disk rather than from a loaded .NET workspace, so a file's role is decided by its PATH segments alone — no declared namespace was available to add to the evidence — and generated output is excluded from the census entirely rather than counted as a generated share.

Method: Roslyn line-count by code ROLE: every source file classified Domain/Application/Infrastructure/Test/Generated by namespace + path convention (the shared CodeRoleClassifier), then significant lines summed per role. Deterministic; the advisory score is the business-logic (domain+application) share of production code.

Coverage: Population: ALL source files, each bucketed into ONE of five roles (Domain/Application/Infrastructure/Test/Generated) by namespace + path convention — a file whose layer isn't named in the convention falls to Application (the neutral default), and the split is line-count, not semantic depth or business value.

What to do

  • The domain core is a small share of production code — check that business logic isn't leaking into the application/infrastructure layers (a thin domain is the anemic-domain smell).
AX3 · Project dependency cycles10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the project-reference graph is acyclic (cycles block independent build/deploy and signal eroding boundaries).

Method: Project reference cycles via elementary-DFS over real .csproj references, using the engine shared with D5/D7; cyclic versus acyclic. Exhaustive, deterministic.

AX4 · Dependency direction10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether dependencies point inward (Domain ← Application ← Infrastructure/Web) — the clean-architecture dependency rule, checked across the project graph.

Method: Layer violations by name-segment inference (Domain/Core to Application to Infrastructure/Web) over the project-reference graph. Exhaustive over all projects, deterministic.

AX5 · Architecture & structure10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the codebase has a recognisable, scale-appropriate structure (a named architectural style, or modular enough for its size) rather than being an ad-hoc ball of mud.

Method: Roslyn plus csproj analysis: architecture style detection (DDD, clean, vertical-slice, CQRS) and structure fitness for repo size. Deterministic.

AX6 · Interface segregation10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether interfaces stay focused rather than fat — the Interface-Segregation principle (SOLID 'I').

Method: Roslyn scan: public interface declared-member counts (accessors fold into their property/event); fat-interface threshold (over 15 declared members) flagged per type. Each finding also reports the distinct-OPERATION count — members counted by name, so an overload group counts once — which decides whether it states the caller-side ISP harm or the implementer-side burden of an overload set. TypeScript: exported interfaces that declare behaviour, counted over their REQUIRED operations (method signatures and function-typed properties with no `?`, once per signature) — data-shape interfaces and ambient .d.ts declarations are outside the population; JavaScript declares no interfaces and is not applicable. Deterministic, type-level.

DM6 · Domain ↔ infrastructure boundary10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether the domain layer stays free of infrastructure dependencies — a domain aggregate fused to a persistence ORM (TypeORM/Prisma/MikroORM/Sequelize/Mongoose) on its own declaration (active-record) couples the domain to infrastructure. The clean-architecture dependency rule.

Method: Roslyn (DDD-gated): domain-layer types scanned for infrastructure usage in member SIGNATURES and inside method/accessor BODIES — resolved calls and object-creations into EF/Marten/HTTP/Mongo/Redis/message-bus types (not just a namespace allowlist). Deterministic, symbol-resolved, exhaustive over domain-layer bodies, DDD-native.

Coverage: Domain layer identified by NAMESPACE heuristic; infrastructure then resolved by symbol in member SIGNATURES and method/accessor BODIES — rename the layer and the check evaporates.

DM9 · Scattered domain decisions10.0 / 10Exemplary✓ Tool-verified

Other · Domain Modelling — Whether one domain rule is decided — or one measurement produced — in more than one place, rather than living on the type that owns it.

Method: Neutral body surface plus Roslyn (DDD-gated), two arms. DECISION (Roslyn only): a predicate over a domain type's members judged in two or more types, where none of those decisions live on the owning type — operands of comparisons and relational property patterns only, so a member merely passed as an argument is not judged. DERIVATION: a plain all-numeric carrier of ≥2 members, with no base type and exactly one constructor, CONSTRUCTED as the result of a method (returned or assigned, never inline as an argument) in two or more types other than its own — the same measurement produced twice, which centralising the judgement does not fix. DERIVATION runs on every language whose frontend declares the produced-or-passed fact per construction (Roslyn and the Java sidecar today); a target with only the derivation arm carries an engine gap naming the decision arm as not assessed, and a frontend that declares nothing keeps the dimension not measured rather than clean. Single-member rules, test code and generated code are out of population for both. Advisory.

GD1 · Unfinished & placeholder code10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Unreviewed-generation residue in this repository's JavaScript/TypeScript: functions whose whole body still throws a "not implemented" error, and placeholder text (lorem ipsum, changeme/replace_me…) left in strings and JSX of non-test, non-generated code. Scored as a quality signature, never as a claim about authorship.

Method: Roslyn syntax scan: NotImplementedException throws and placeholder string literals in non-test, non-generated shipped code. Deterministic, code-shape signature.

IC1 · Incompleteness & stubs10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Unfinished work detected by code SHAPE, not keywords, in this repository's JavaScript/TypeScript: functions that only throw a "not implemented" error, functions that take inputs and return a constant or do nothing, async functions that never await, dead `if (false)` branches, and skeleton classes most of whose methods are holes.

Method: Roslyn syntax scan: incompleteness by code shape (constant-returning methods, async-never-await, #if false branches, guards that return what the code already falls through to, tests an earlier guard already decided, comparisons against NaN, skeleton types), not keyword-gated. Deterministic, code-shape heuristic.

M1 · Documentation (README)10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

M2 · Architecture documentation2.0 / 10Critical✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

  • No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

  • Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

  • No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

  • Add a CI workflow that builds and runs the test suite on every push/PR.
P10 · Library API & versioning10.0 / 10Exemplary○ Nothing flagged

Readiness · Readiness — For a library: a deliberate (small) public API surface and explicit semantic versioning so consumers can depend on it safely.

Method: Roslyn scan: public API surface area and semantic-versioning markers (SemVer attributes, changelog entries) for libraries; off .NET, a library is the ecosystem's publication act (an npm package that is not private and names an entry point, a PyPI distribution with a build system, a Rust library crate, a Maven/Gradle module that publishes, a Go module with no package main, a gemspec, a Composer library, a SwiftPM library product, a pub.dev or Hex package), its surface is the share of types the language model records as public (Rust, Swift, Java, Kotlin, Go, Dart; not measured where the model records no type visibility or, as in TypeScript, only module-level export), and its version is read from the manifest, a semver CHANGELOG, release tooling or semver git tags. Exhaustive, deterministic.

P2 · Observability7.0 / 10Strong✓ Tool-verified

Readiness · Readiness — Whether the code is diagnosable in production — structured logging, tracing/metrics, health checks.

Method: Filesystem/Roslyn scan: structured-logging frameworks (Serilog, NLog), OpenTelemetry, and health-check endpoint patterns. Exhaustive, deterministic.

  • `src/adapters/repositories/trace/UseCaseTrace.repository.ts` reports through `console.*` at line 8 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/adapters/repositories/trace/UseCaseTrace.repository.ts:8
  • `REDACTED` reports through `console.*` at line 54 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — REDACTED:54
  • `REDACTED` reports through `console.*` at line 74 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — REDACTED:74
  • `REDACTED` reports through `console.*` at line 100 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — REDACTED:100
  • `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 21 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/app/server/HttpServer.ts:21
  • `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 29 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/app/server/HttpServer.ts:29
  • `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 32 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/app/server/HttpServer.ts:32
  • `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 8 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/logger/Logger.ts:8
  • `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 12 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/logger/Logger.ts:12
  • `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 16 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/logger/Logger.ts:16
  • `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 20 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline. — src/infrastructure/logger/Logger.ts:20

What to do

  • Route service-code `console.*` output through the module's structured logger (with named fields), so delivery outcomes and failures reach the log pipeline with a level.
  • Consider OpenTelemetry tracing/metrics (@opentelemetry/sdk-node) and a health-check endpoint (@godaddy/terminus or a /health route) for operability.
P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

  • No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.

What to do

  • Run what this repository's stack ships: CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
  • Enable Dependabot/Renovate or a dependency-review gate.
  • Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are automated and safely reversible (probes, rolling updates, approval gates) — from manifests/pipeline files, not the live environment.

Method: Filesystem scan: deployment manifests/IaC (K8s YAML, Helm, Terraform) for rolling updates, probes, approval gates, migration hooks. Exhaustive, deterministic.

  • Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.

What to do

  • Add a `healthcheck:` to the served compose service — probing the endpoint it already answers on where it has one — with `depends_on: condition: service_healthy` on whatever waits for it, and keep the deployed image tag immutable and recorded so rolling back is re-pointing at the previous tag rather than rebuilding.
  • Add an approval/environment gate (required reviewers / protection rules) before production promotion.
P9 · Domain vs controller coverage9.2 / 10Exemplary✓ Tool-verified

Readiness · Readiness — Whether test coverage concentrates on the domain (business rules) rather than the trivial web/controller layer — a focus check a generic tool can't make.

Method: Roslyn plus test-execution analysis: domain-layer versus trivial web/controller coverage ratio. Computed metric, deterministic.

What to do

  • Raise domain coverage toward 100% — cover the remaining aggregates / value objects / domain services where the business invariants and costly bugs live.
PF3 · Async & latency hygiene10.0 / 10Exemplary✓ Tool-verified

Readiness · Performance — Whether asynchronous code stays responsive — it avoids sync-over-async blocking (a .NET .Wait()/.GetAwaiter().GetResult(), a time.sleep or blocking HTTP call inside a Python coroutine, a *Sync call inside an async JavaScript function, block_on inside a Rust async fn, runBlocking inside a Kotlin suspend function, block() inside a Reactor publisher) that stalls a thread or event loop and risks deadlock, and, where the code is a reusable library on .NET, awaits with ConfigureAwait(false) so it never captures and stalls its caller's context.

Method: Production-source scan: sync-over-async blocking counted everywhere — .Wait()/.GetAwaiter().GetResult() in .NET; off .NET, read from the language model, a blocking call inside an async function (Python, TS/JS, Rust, Kotlin, Swift, Dart) or inside a Java method returning a Reactor Mono/Flux or a Scala method returning a Future or effect — and, for a .NET library with ≥5 awaits, the share of awaits using ConfigureAwait(false). Deterministic, syntax/text detection.

R1 · Type Safety10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How much of the frontend is typed TypeScript vs untyped JavaScript.

Method: Frontend file inventory: the share of typed TypeScript vs untyped JavaScript across the source tree. Deterministic, exhaustive over frontend files.

R10 · Code Duplication8.7 / 10Strong✓ Tool-verified

React / JS · Code Health — Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm over JS/TS tokens, D-386): a block is reported only where its copies still agree on most of their own identifiers and literals, or were renamed as they were pasted but kept most of their constants, and where the copies carry enough code to stand on their own or the copied extent reaches 30 lines — so a re-implementation sharing neither names nor values, and a small pasted declaration, are both found and deliberately not reported, and a clean R10 is not a claim that nothing was copied.

Method: Near-exact copy-pasted blocks of substantial extent across the frontend (the D4 clone algorithm run over JS/TS tokens). Masking finds the candidates; a block is reported when its copies still agree on most of their own identifiers and literals, or when a renamed copy still agrees on most of its constants, AND the copies carry enough code to stand on their own — or when the copied extent reaches 30 lines. So a re-implementation sharing neither names nor values, and a small pasted declaration, are deliberately not counted. Deterministic.

  • 6 duplicated blocks under src/adapters/controllers/ have copies in at least two of the sibling directories auth, status, users — 2 of them are reported below, and 4 are counted here but not reported individually: those copies match on shape but no longer clear R10's bar for an individually reported row — either they kept neither their own names nor their values, or what was copied is too small to stand on its own (it reports near-exact duplication only, and only of substantial extent). What this row states is the concentration, which the detector measured over all 6 and which does not depend on how exactly each block's copies still match. That concentration is one structural fact, not 6 local ones: the siblings replicate behaviour none of them owns, which is the shape of a missing shared module — a common library every sibling imports — rather than 6 separate extractions. Check first whether the siblings are deliberately standalone deliverables (scaffold templates, demo apps that must stay copy-pasteable); where they are, the duplication is the design and the per-block rows are the ones to act on. — src/adapters/controllers/auth/Auth.controller.ts:26
  • src/adapters/controllers/auth/Auth.controller.ts:26 · src/adapters/controllers/users/Users.controller.ts:19 — the two spans are one implementation copied and then locally edited — 400 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — src/adapters/controllers/auth/Auth.controller.ts:26
  • src/adapters/controllers/auth/container/index.ts:3 · src/adapters/controllers/status/container/index.ts:3 · src/adapters/controllers/users/container/index.ts:4 — the 3 copies are spread across 3 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another. There is one copy in each of 3 separate files rather than several in one place, so check first whether these are sibling modules that each declare their own version of one shape — one per entity, per provider, per language. Where they are, no single extracted module collapses them: each module still has to be written, and what recurs is the TEMPLATE. The moves that do collapse a template are to generate these modules from the set they enumerate, or to replace the repeated construction with one factory each site calls with its own values — and where the set is the point, each module pinning one distinct thing, the repetition IS the enumeration and there is nothing to delete. — src/adapters/controllers/auth/container/index.ts:3
  • src/adapters/controllers/users/Users.controller.ts:58 · src/adapters/controllers/users/Users.controller.ts:133 — all 2 copies are in the same file, and the CITED SPAN is a run of DECLARATIONS inside a construct — the members of a type, or the entries of an object or array literal — with no statement anywhere in it. Do not read this as an extract-a-helper row: nothing here executes, so there is no call site, and a call expression cannot stand where a member declaration or a literal's entry was. What repeats is a SHAPE, and which shape decides the move. Where the copies declare the same members, the repetition is a missing common ancestor: give it a base type, an interface both extend, a generic instantiated twice, or — where the copies are a literal's entries rather than a type's members — one shared constant each site spreads or refers to, so the set is written once. Where they declare DIFFERENT members and only the form is shared — a decorator and its options, an annotation, a registration table's keys — the form is prescribed by a framework or a schema rather than copied, and the only collapse available is to generate the declarations from that schema; where you do not own the generator, this is the cost of the framework and there is nothing to extract. Check which of the two it is before acting: these copies still drift apart the first time only one of them is edited, which is why the repetition is reported, but the sentence to act on is not the same in both cases. — src/adapters/controllers/users/Users.controller.ts:58
  • src/adapters/controllers/base/Base.controller.ts:163 · src/adapters/controllers/base/Base.controller.ts:178 · src/adapters/controllers/base/Base.controller.ts:193 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. — src/adapters/controllers/base/Base.controller.ts:163
  • src/adapters/providers/base/Base.provider.ts:10 · src/adapters/repositories/base/Base.repository.ts:8 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another. — src/adapters/providers/base/Base.provider.ts:10
  • src/adapters/controllers/status/Status.controller.ts:23 · src/adapters/controllers/status/Status.controller.ts:36 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — src/adapters/controllers/status/Status.controller.ts:23
  • src/adapters/controllers/base/Base.controller.ts:81 · src/adapters/controllers/base/Base.controller.ts:93 · src/adapters/controllers/base/Base.controller.ts:105 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited. — src/adapters/controllers/base/Base.controller.ts:81
  • src/application/modules/users/useCases/get/index.ts:41 · src/application/modules/users/useCases/register/index.ts:61 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported. — src/application/modules/users/useCases/get/index.ts:41
  • src/application/shared/locals/messages/index.ts:9 · src/application/shared/locals/words/index.ts:9 — the 2 copies are spread across 2 files, and the SHAPE of this repetition could not be determined. It is not a run of declarations, a listing, a declaration header, a type body or a slice through a construct — and it was not measured as a run of executable statements either, so this row cannot tell you whether a function can stand where these lines are. Read the two spans before acting, because the move is opposite in the two cases. Where they are statements, the ordinary answer holds: give the shared part one home and call it from each site. Where they turn out to be declarations, a literal's entries, or the cases of an enumeration, there is no call site to call anything from, and collapsing them would delete what each copy pins — a shared base type, a generated set, or one exported constant each site refers to is the move instead, and sometimes the honest answer is that there is nothing to extract at all. Reported because the copies drift apart the first time only one of them is edited, which is true whichever of those they are. — src/application/shared/locals/messages/index.ts:9
  • src/infrastructure/httpClient/HttpClient.ts:128 · src/infrastructure/httpClient/HttpClient.ts:169 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — src/infrastructure/httpClient/HttpClient.ts:128
  • src/adapters/repositories/user/User.repository.ts:15 · src/adapters/repositories/user/User.repository.ts:23 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited. — src/adapters/repositories/user/User.repository.ts:15
  • src/application/modules/auth/dtos/Credentials.dto.ts:19 · src/application/modules/users/dtos/User.dto.ts:51 — the two spans are one implementation copied and then locally edited — 53 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one. — src/application/modules/auth/dtos/Credentials.dto.ts:19

What to do

  • Act on each finding's own remediation rather than one rule: the move depends on what recurs. Where the copies are executable blocks, give the shared part one home and call it from each site; where they are declarations, a listing, a specialisation already delegating to its base, or one shape repeated per entity, there is no call site and the move is a shared type, a generated set or a factory — sometimes there is nothing to extract.
R11 · Import Boundaries10.0 / 10Exemplary✓ Tool-verified

React / JS · Architecture — Conformance to the detected frontend architecture layout (feature-sliced / layered src) plus cross-package deep-import rules (D-386).

Method: Conformance to the detected frontend layout (feature-sliced / layered src) plus cross-package deep-import rules, over the module graph. Deterministic.

R2 · Cyclomatic Complexity10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — Per-function cyclomatic/cognitive complexity from the token-level function scanner (D-386) — real branching, not a regex heuristic.

Method: Per-function cyclomatic/cognitive complexity from a token-level function scanner (real branching, not a regex heuristic), computed over every frontend function. Deterministic.

R3 · Large Files10.0 / 10Exemplary✓ Tool-verified

React / JS · Code Health — How many source files exceed the large-file threshold.

Method: Components/modules exceeding the large-file threshold, counted exhaustively across the frontend source tree. Deterministic.

R4 · Test Coverage4.1 / 10Weak✓ Tool-verified

React / JS · Readiness — Static test reachability (D-386): the share of production files reachable from any test via the import graph — measured without running anything.

Method: Static test reachability: the share of production files reachable from any test via the import graph — measured without running anything. Deterministic.

  • No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one. (×40) — src/infrastructure/httpClient/HttpClient.ts:1, src/adapters/controllers/base/Base.controller.ts:1, src/adapters/controllers/base/apiDoc/ResultDescriber.ts:1, …

What to do

  • Add tests that import the unreached modules (directly or through their public entry).
R6 · Tooling10.0 / 10Exemplary✓ Tool-verified

React / JS · Readiness — Whether the project wires up test, lint and typecheck — detected from each package.json script's COMMAND (eslint / tsc / vitest / jest / playwright), not just its name, and corroborated against CI-workflow invocations so a tool run only in CI still counts.

Method: package.json scanned for test/lint/typecheck script wiring. Deterministic presence check.

R7 · Dead Code5.9 / 10Adequate✓ Tool-verified

React / JS · Code Health — Files unreachable from every application/tooling/test entry point, and exports nothing imports (module-graph reachability, D-386).

Method: Dead code: files unreachable from every application/tooling/test entry point plus exports nothing imports, via module-graph reachability. Deterministic, exhaustive over the import graph.

  • Unreachable from the 3 application, 2 tooling and 15 test entry point(s) detected in this repo. Gate removals on `pnpm run build` — an undetected custom entry would make these reachable.
  • no import path from any entry point (3 application, 2 tooling, 15 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make (×4) — src/adapters/controllers/users/Users.controller.ts, src/adapters/controllers/auth/Auth.controller.ts, src/application/shared/iterator/BaseIterator.ts, …
  • no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/users/container/index.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — src/application/modules/users/useCases/get/index.ts
  • no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/users/Users.controller.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — src/adapters/controllers/users/container/index.ts
  • no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/auth/Auth.controller.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it — src/adapters/controllers/auth/container/index.ts
  • Nothing imports this binding — it is safe to review for removal. — src/adapters/repositories/container/index.ts:17
  • Nothing in its class reads or assigns this private field (for a constructor parameter property: it is stored and never read), and no string key or test reaches it by name. Remove it, or use it where it was meant to take effect. — src/application/modules/status/useCases/default/index.ts:9

What to do

  • Delete the dead files and unused exports — every line is maintenance cost and rebuild-estimate inflation with zero runtime value.
R8 · Dependency Hygiene9.5 / 10Exemplary✓ Tool-verified

React / JS · Readiness — npm dependency truthfulness (D-386): unused dependencies, imports not declared anywhere, and type-/test-only packages shipped as production deps.

Method: npm dependency truthfulness: unused dependencies, imports declared nowhere, and type-/test-only packages shipped as production deps — from the manifest + import graph. Deterministic.

  • Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.

What to do

  • Remove unused dependencies, declare unlisted imports explicitly, and demote type-/test-only packages to devDependencies.
R9 · Circular Imports8.1 / 10Strong✓ Tool-verified

React / JS · Architecture — Import cycles in the module graph (D-386) — files that can only be understood and changed together.

Method: Import cycles in the module graph, detected exhaustively over JS/TS imports (the same cycle detection as the .NET coupling dimension). Deterministic.

  • src/adapters/controllers/base/Base.controller.ts → src/adapters/controllers/base/apiDoc/types.ts → src/adapters/controllers/base/Base.controller.ts (one verified cycle inside a mutually-dependent group of 4 files) — src/adapters/controllers/base/Base.controller.ts:8

What to do

  • Break each cycle by extracting the shared piece into a module both sides can import.
X1 · Async correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the code avoids sync-over-async (deadlock-prone blocking on tasks) and async void.

Method: Roslyn syntax scan: async methods scanned for .Wait()/.GetAwaiter().GetResult() and async-void outside event handlers. Deterministic, hard fact per invocation.

X12 · Unreachable branch10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether any branch is dead by construction — a switch arm whose label can never equal a case-normalised subject, or an `else if` whose predicate the arm above has already swallowed.

Method: Roslyn syntax + semantics: switch labels compared against the subject's own case normaliser, and if/else-if chains checked for a literal an earlier arm's containment test already swallows. Deterministic, provable per finding. Advisory.

X13 · Undrained process stream10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a child process that has BOTH standard streams redirected drains both — reading one to the end while the other is never read deadlocks once the child fills the unread pipe.

Method: Roslyn syntax + semantics: ProcessStartInfo launches with both streams redirected, checked for a drain of each stream across the enclosing type. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `spawn` imported from `child_process` whose stdout and stderr are both pipes (no options, no `stdio`, or `stdio` of `'pipe'`), bound to a local that never leaves its scope, where exactly one of the two streams is read, the other never, and the child’s `close`/`exit` (or the read stream’s end) is awaited; a shell redirect in the call’s arguments or a `kill` of the child suppresses it. The same rule reads Python’s `subprocess.Popen`, Dart’s `Process.start`, Ruby’s `Open3.popen3`, and Scala’s JDK process starts (`new ProcessBuilder(…).start()` with no `redirectErrorStream`/`redirectError`/`redirectOutput`/`inheritIO`, `Runtime.getRuntime.exec`) where one of `getInputStream`/`getErrorStream` is read and the other never while `waitFor()` is called or the read stream is read to its end. Deterministic, provable per finding. Advisory.

X14 · Bypassable address classification10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a hand-rolled public/private IP check can be walked past — a method that unwraps IPv4-mapped IPv6 but returns the opposite verdict for the same host written as IPv4-compatible, 6to4 or NAT64.

Method: Roslyn syntax + semantics: methods that unwrap IPv4-mapped IPv6 and hand-roll IPv4 range carve-outs, checked for whether the IPv6 branch also accounts for the IPv4-compatible, 6to4 and NAT64 embeddings. Deterministic, provable per finding. Advisory.

X15 · Unvalidated length from an untrusted reader10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a length read out of the stream being parsed is bounded before it is allocated or read — an unchecked count taken from the input lets the input choose the allocation.

Method: Roslyn syntax + semantics: integer lengths read from a BinaryReader and spent on a bulk read or an array allocation, checked for any comparison or bounding call on the value anywhere in the method. Deterministic, provable per finding. Advisory.

X16 · Unfloored truncation loop10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a loop that shortens a string until it fits a length budget has a floor — one with none grinds the value down to the empty string, or past it into a negative-length `Substring`.

Method: Roslyn syntax + semantics: while/do loops whose body's only effect on a string is to drop its last character, checked for whether anything — a direct comparison on the length, a body guard, a break — bounds that length below. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `while`/`do` loop whose body’s one assignment to a value is `x = x.slice(0, -1)` or `x = x.slice|substring|substr(0, x.length - 1)`, driven by a condition that reads `x.length` only as a term of a larger expression — never compared directly, never tested for truthiness, and with no other read of `x` — and whose body has no `break`, `return`, `throw` or `if` naming `x`. Deterministic, provable per finding. Advisory.

X17 · Uncapped recursion over a caller-supplied document10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether a walk that recurses through a JSON/XML tree handed in by its caller bounds how deep it will go — an uncapped walk lets the document's nesting choose the stack depth, and the resulting StackOverflowException cannot be caught.

Method: Roslyn syntax + semantics: methods that take a JSON/XML document node and call themselves with a child of it, reachable from an externally-callable member of the same type that accepts a document, checked for any depth parameter, descent counter or threaded arithmetic anywhere in the walk. On a repository with no .NET source it reads TypeScript off the engine’s own token stream (test, vendored, generated and minified paths and `.d.ts` not) with the same rule: a function or method with a parameter typed as a document value — `unknown`, `any`, `object`, `Record<string, unknown|any>`, a JSON alias (`JsonValue`, `JSONObject`, …) or a DOM node global the file does not rebind — that calls itself (bare, or through `this` for a method, or hands itself to a call over the value as in `value.map(walk)`) with something it took out of that value and never through an ancestor accessor such as `closest()` or `parentElement`, that is exported or reached from an exported function (a public method of the same exported class) taking such a value, and that names no depth, level, nesting, recursion, remaining or budget anywhere and threads no `+`/`-` arithmetic through a self-call. Plain JavaScript is not read: with no annotation nothing tells a parsed document from a tree the code built itself. Deterministic, provable per finding. Advisory.

X18 · Disposal-pattern correctness10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a type's disposal matches what it OWNS — releasing what it created, leaving alone what it was handed, and not declaring a finalizer for state that has nothing unmanaged to finalize.

Method: Roslyn syntax + semantics: every assignment to a disposable field is read to decide whether the type CREATED the value or was handed it, and the type's disposal is checked against that answer — an injected interface it disposes, a value it constructed and never releases, a finalizer on a type holding nothing unmanaged, and a disposable local whose every reference is a plain member read. A value handed to a container that disposes its contents (a parent control's `Controls` collection, a component `IContainer`) is released by that container and is not reported; generated code is out of population. On a repository with no .NET source the same ownership questions are read in JavaScript/TypeScript off the engine’s own token stream (test, vendored, generated and minified paths not): a class declaring `dispose()`, `[Symbol.dispose]()` or `[Symbol.asyncDispose]()` that disposes a field it was handed through a constructor parameter typed as a repository interface or resolved by a dependency-injection container; that assigns a field only ever from `new X(…)` of a disposable class and neither releases it anywhere in the class nor names it in its disposal member or a method that member calls, nor hands it to anything else; and a `const`/`let` local built from literals only whose every reference opens a statement operating on a non-release member of it. A class is disposable when every repository declaration of its name declares or inherits a disposal member, or when it is a documented library disposable (`vscode` EventEmitter, CancellationTokenSource and Disposable; three.js geometries, materials, textures, render targets, renderers, controls and composers). The finalizer arm has no JavaScript counterpart: a class cannot declare one. Dart is read for the owned-and-never-released arm: a Flutter `State` (or a class declaring `dispose()`/`close()`) whose library-private field is written only with direct creations of a framework controller, `FocusNode`, `StreamController` or periodic `Timer` (or a `.listen(…)` into a field declared `StreamSubscription`), which nothing in the class or its library releases (`dispose`/`close`/`cancel`) and which is never handed on except as a named argument. Ruby is read for the owned-and-never-released arm and the abandoned-local arm: a class declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose instance variable is written only with a blockless core descriptor creation (`File.open`/`new`, `Tempfile`, `Dir.open`, `IO.popen`, the `socket` and `openssl` socket classes) that no method of the class closes and that is never handed on (passed, returned, stored, exposed by `attr_reader`, delegated) — a class whose superclass or mixin lies outside the repository is not judged — and a blockless creation read through and dropped (`File.open(path).read`) or held in a local that is never closed, returned, passed or stored (a `&:read` block-pass, an `autoclose: false` borrow and a `fileno` hand-over are not abandonment). PHP is read for the same two arms: a class (not a trait, and not one using a trait) declaring an instance `close`, `dispose`, `shutdown`, `stop`, `disconnect` or `terminate` whose `private` property (or a `final` class's `protected` one) is written only with a direct core `fopen`, `tmpfile`, `popen`, `proc_open`, `fsockopen`, `stream_socket_client`/`server` or `opendir` that nothing in the class closes (`fclose`, `pclose`, `closedir`, `unset`, a reset to `null`) and that is never handed on, and a handle held in a function's local, or read through as the argument of a reader, that is never closed, returned, passed, captured or stored; a `php://` stream, `curl_init`, `SplFileObject`, `PDO` and a function the repository declares under the core name are not read. Deterministic, provable per finding. Advisory.

X19 · Unrestored process-global state10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that temporarily changes state belonging to the whole process — the working directory, an environment variable — puts it back on EVERY path: a restore reached only when nothing throws leaks the change to the rest of the process.

Method: Roslyn syntax + semantics: method bodies that write the process working directory or an environment variable and write it back in the same body, checked for whether that restore sits in a `finally`/`catch` or only on the straight-line path. On a repository with no .NET source the same rule reads production JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not): `process.chdir`, `process.env.NAME =`/`["NAME"] =` and `delete process.env.NAME`, and Deno’s `Deno.chdir`/`Deno.env.set`/`Deno.env.delete`, paired per function body (a nested function or arrow is its own body, and module top-level code is none), where the last write puts back a local the body captured from the same global or deletes a variable the first write set, with at least one statement between them; a write in a `catch`/`finally` of that body silences it. Deterministic, provable per finding. Advisory.

X2 · Cancellation propagation4.0 / 10Weak✓ Tool-verified

Other · Code Health — Whether async functions that make a cancellable request accept or pass on an AbortSignal (adoption curve).

Method: Roslyn scan: every async method (excluding framework-fixed overrides/Blazor handlers) checked for CancellationToken parameter presence. Deterministic, adoption percentage. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same question: every named async function that itself makes a request an AbortSignal can cancel (global `fetch`, axios and its file-local instances, ky, ofetch) counts, and it is compliant when its parameters or body name a signal or it hands one of its own parameters to the request as options; signatures a framework fixes (JSX event handlers, route and lifecycle exports, request-first handlers, `override`, `'use server'` modules, TanStack `mutationFn`) are exempt unless they take a signal. Deterministic, adoption percentage.

  • Only 0/1 async functions that make a cancellable request (fetch, axios, ky, ofetch) accept an AbortSignal or pass one on, so a request keeps running after whatever wanted it has given up — a page navigated away from, an unmounted component, a timed-out job. Take a `signal` (or an options object that carries one) and hand it to the request; where nothing could ever cancel the call, omitting it is a deliberate choice — judge against how the function is used.
  • `send` awaits `fetch(…)` but neither accepts an AbortSignal nor passes one on, so its caller cannot stop the request once it has started. Accept `{ signal }` and pass it through: `fetch(url, { signal })`. — src/infrastructure/httpClient/HttpClient.ts:278

What to do

  • Thread an AbortSignal through async functions that make requests, so the work stops when its caller gives up.
X21 · Side-effecting pattern guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a `when` guard is free of side effects — a guard that increments a counter or assigns while deciding whether its arm matches applies that change during PATTERN MATCHING, on an arm that may not be selected, and skips it entirely when a short-circuit to its left answers first.

Method: Roslyn syntax: `when` guards on case labels and switch-expression arms, read for a mutation (`++`/`--`/assignment) sitting in a position the guard's own `&&`/`||`/`??`/`?:`/`?.` can skip. Deterministic, provable per finding. Advisory.

X22 · Contradicted release guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a method that TAKES a lock or semaphore and gives it back from a flag-guarded `finally` returns the value that flag implies — reporting success while the guard hands the primitive back admits a second caller the exclusion was there to keep out, and reporting failure while the guard keeps it leaves nothing to ever give it back.

Method: Roslyn syntax: `try` statements whose `finally` releases a synchronisation primitive under a bare local-bool guard, where the method also TOOK that same primitive before the `try`, checked for a `return` of a bool literal whose value disagrees with the flag state the method's own straight-line assignments put it in. Deterministic, provable per finding. Advisory.

X23 · Unguarded diagnostic materialisation10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether the work a diagnostic log line costs is paid only when that line is wanted — C# evaluates a call's arguments BEFORE the call, so a trace/debug message joined or projected out of a collection is built in full on every pass, and then discarded by a sink the shipped configuration leaves switched off.

Method: Roslyn syntax: log calls at a diagnostic level (a `Log`-prefixed method naming Trace/Debug/Verbose, or a bare `Debug`/`Trace`/`Verbose` on a receiver named for a logger), whose argument list is read for a call whose cost scales with a sequence — a LINQ operator, a materialisation, `string.Join`, a serializer — with no enclosing level check or conditional-compilation region. On a repository with no .NET source it reads JavaScript/TypeScript off the engine’s own token stream (test, vendored and minified paths not) with the same rule: a `debug`/`trace`/`verbose` call on a receiver named for a logger, or a `log`-prefixed method naming the level, whose argument calls an array operator (`map`/`filter`/`reduce`/`sort`/…), `Array.from`, `Object.keys/values/entries`, `JSON.stringify`/`util.inspect` over anything but a literal, or an array `join` — outside any arrow or function passed as an argument, which the logger calls only when the level is on — with no enclosing `if`, `&&` or `?:` whose condition names a level, a level string, or the `NODE_ENV`/`__DEV__`/`DEV` build switch. Deterministic, provable per finding. Advisory.

X24 · Document value interpolated into markup unescaped10.0 / 10Exemplary○ Nothing flagged

Other · Security — Whether text read out of the document being converted is escaped before it is written into generated markup — a value the document's author chose, interpolated into an attribute the surrounding literal delimits, can close that attribute and open another.

Method: Roslyn semantic model over the whole compilation: a string-typed `Value`/`InnerText`/`InnerXml`/`Text` member declared inside `DocumentFormat.OpenXml` or `System.Xml` is a taint SOURCE, propagated through assignments, returns, arguments, tuple elements and string composition to its transitive closure, then read at interpolated-string holes that sit in a markup position the surrounding literal itself delimits. Escaper/encoder calls and enclosing validator conditions cut the flow. Flow- and container-insensitive by construction. A second arm needs no provenance at all and reports a type that CONTRADICTS ITSELF — the same expression escaped at one delimited markup hole and interpolated raw at another hole in the same markup position of the same type, which the type's own escaping proves is a defect without knowing where the value came from. On a repository with no .NET source it reads JavaScript/TypeScript off the token stream with the same rule: a DOM read of raw document text (`getAttribute`, `textContent`, `innerText`, `nodeValue`) is the source, propagated through local bindings and string composition, and judged at template-literal and concatenation holes in the same two delimited markup positions; escapers and validating conditions cut it, and documentation-site, test, vendored and minified scripts are not read. Deterministic, provable per finding. Advisory.

X25 · Inert configuration knob10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a value the caller is invited to supply is the value the type actually uses — a constructor parameter stored in a private field that nothing ever reads while the default it was given is spelled out a second time at the site that should have read it, a keyed lookup that falls back to a different setting than the one its key names while the same type falls back to the matching one for that same key, or a culture-sensitive parse given no format provider by a type that feeds its own settable culture to the same kind of parse elsewhere, or a number an entry point writes to standard output under the host's culture while the same entry point formats with the invariant culture elsewhere. Either way, every caller who supplies a value silently gets something else.

Method: Roslyn syntax: private instance fields of a non-partial type assigned in a constructor from one of its own parameters with a `??` fallback, checked for whether anything in the type body reads the field and whether that same fallback expression is spelled out again outside the constructor; and `??` fallbacks onto a member access from a lookup call carrying exactly one string literal, grouped by that key across the type and checked for a fallback member whose folded name disagrees with the key while a sibling site for the same key agrees with it. On a repository with no .NET source the first two arms read JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `#x`, `private` or `private` parameter-property instance field filled in the constructor from a parameter (or one member of one) through `??`/`||` or a parameter default, never read anywhere in the file by name, whose constructed default is spelled again in the class body; and `lookup("key") ?? s.member` grouped by key per class, or per module outside every class. The culture arm has no JavaScript counterpart: its parses take no locale. Deterministic, provable per finding. Advisory.

X28 · Index access outside its own emptiness guard10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a condition that tests a value for emptiness indexes that same value only where the test holds — an `||` written one parenthesis too far to the left leaves an index access outside the guard beside it, so the empty case the guard exists to anticipate reaches the index and throws.

Method: Roslyn syntax only, no semantic model: the OUTERMOST `&&`/`||` of every boolean condition, read for a symbol the condition tests for emptiness (`string.IsNullOrEmpty`/`IsNullOrWhiteSpace`, a `Length`/`Count` comparison against a literal, `Any()`, a `Length`/`Count` pattern, or a comparison against `""`) and ALSO indexes. Each `symbol[...]` access is placed by a boolean-reachability walk from the access up to the outermost connective: an access is COVERED when some enclosing step has it in the right operand and the left operand, under the truth value that step forces, proves the symbol non-empty — a recursion over `&&`/`||` whose true- and false-directions are asymmetric. A finding needs BOTH an uncovered access and a covered one on the same symbol in the same condition, which is the agreeing twin that separates a misplaced parenthesis from an unrelated length test. Bare index accesses with no emptiness test in the condition are neither counted nor reported; a non-identifier receiver and a lambda nested inside the condition are outside the population. Deterministic, provable per finding. Advisory.

X29 · Per-element action decided by a fixed element10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a decision taken once per element is taken ABOUT that element — a test inside a counted loop that reads a fixed subscript of the very collection its guarded statement indexes by the loop variable applies element zero's answer to all of them, so the elements that differ from it are all handled wrongly, and in the same direction.

Method: Roslyn syntax only, no semantic model: every `for` statement declaring exactly ONE loop variable, and every `if` inside its body that is not under a nested loop or a lambda. A site enters the population when the `if`’s condition never mentions the loop variable while the statement it guards indexes some collection by that variable ALONE (`c[i]`; `c[i + 1]` and `c[i, j]` are outside it). A finding additionally needs the AGREEING TWIN at the same-collection grain: the condition must read THAT SAME collection at a subscript that does not move — written into the condition, or reached through a local declared BEFORE the loop, so an alias bound inside the body is not followed. Both collection expressions must be simple identifiers. On a repository with no .NET source the same rule reads JavaScript/TypeScript off the engine’s own token stream (tests included, bundles and vendored paths not): a `for (let|var|const x = …; …; …)` with one declarator and a braced body, an alias followed only when it is declared before the loop in a block that encloses it and never assigned inside the loop. Deterministic, provable per finding. Advisory.

X3 · Exception handling10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether exceptions are handled rather than silently swallowed or rethrown with lost stack traces.

Method: Roslyn syntax scan: every catch clause counted; empty catches and bare rethrows flagged. Population is all catch clauses, not estimated. Deterministic, hard fact.

X30 · Support guard that admits what it rejects10.0 / 10Exemplary○ Nothing flagged

Other · Code Health — Whether a guard written as a NEGATED `||` says what its author meant — `!(a || b || x != k)` is `!a && !b && x == k` by De Morgan, so a bail-out that mixes capabilities the code needs with a fault it refuses turns inside out: it fires only where the capabilities are ABSENT, and lets every value the fault term names walk straight into the body that cannot handle it.

Method: Roslyn syntax only, no semantic model: every logical-not whose operand is a parenthesised `||` chain of two or more disjuncts, flattened (a left-nested `a || b || c` read once would see `(a || b)` as one disjunct). A site enters the population on that shape alone. A finding additionally needs the disjuncts to DISAGREE in polarity: at least one bare boolean read — an identifier or member access, never an invocation, which is a predicate rather than a capability flag — and at least one `x != <constant>`, the only form that negates into an exact-value pin (`== null` negates into a looser requirement and is outside the fault set). Consistently-polarised disjunctions, all-fault or all-capability, are counted and never reported; a negated `&&` is outside the population entirely. No same-receiver gate: it was measured to cost a real defect and remove no false positive. Deterministic, provable per finding. Advisory.

X5 · Nullable reference types7.3 / 10Strong✓ Tool-verified

Other · Code Health — Whether strict null checking is enabled and not undermined by heavy `!` assertion — TypeScript's `strictNullChecks` (which `strict` turns on) is what makes `string` exclude `null` and `undefined`, and the postfix `!` is the operator that silences it.

Method: Roslyn compiler-options scan: NullableContextOptions per project; null-forgiving (!) suppression density per 1k syntax nodes. Deterministic, adoption plus suppression penalty.

  • 2/3 of this repository's type-checking configuration(s) turn on strict null checking (`"strict": true`, or `"strictNullChecks": true`). A configuration that states neither is counted as OFF, because off is tsc's own default; a solution-style one whose `"files"` is empty and whose `"references"` point at other projects is in neither number, because it checks no source itself. Where it is off, `string` admits `null` and `undefined`: passing a value that is null compiles silently and throws on the first property access.

What to do

  • The findings name the configuration each number was taken from and, for the assertions, the files that hold them. Turn null checking on where it is off — `"strict": true` in the base tsconfig that the others extend switches `strictNullChecks` on with the rest of the family — and then resolve the assertions rather than adding to them. A `!` on a value the checker could show to be null is a promise the author cannot check from where they are standing, and each one is a `TypeError: Cannot read properties of null` waiting for the path that makes it true; where the value genuinely cannot be null, say something the checker can see instead (narrow it with a test, make the property required, drop the `?`).

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

LensScoreRatingImpact
Code Health71%StrongSolid.
Architecture78%StrongSolid.
Maturity69%Adequate — gated by M2Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Readiness26%Weak — gated by D13, P1, P3Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security81%Adequate — gated by D28Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Domain Modelling100%ExemplaryStrongest area.
Performance100%ExemplarySolid.
Unscored — 1 check(s) recorded observations but carry no score

These checks ran and found something, but they do not carry a score — either by design (an advisory check reports evidence rather than grading it) or because they could not be scored here. They are excluded from the score for that reason, not because there was nothing to see.

  • SC1 Supply-chain hygiene — 1 observation(s) recorded · Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Not evidenced — 2 control(s) we could not find positive evidence for

These checks grade a working control, and the repository shows no evidence of one. That is deliberately not scored as a zero: a repository cannot show an ops runbook, a database TTL or an infrastructure-side audit log, so absence of evidence here is not evidence the control is missing. It is also not a statement that the check is irrelevant to this codebase — the thing it grades applies; we just could not see it. Excluded from the score either way.

  • P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
  • P6 Release Hygiene — not evidenced — no changelog, version stamp or semver release tag in the repo
Not included — 62 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

  • AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
  • AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
  • AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
  • AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
  • AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
  • AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
  • AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
  • AX1 Captive dependencies — Not applicable: this repository's TypeScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
  • AX2 Stateful singletons — Not applicable: TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
  • AX7 Slice cohesion — not applicable — not a vertical-slice architecture
  • AX8 Test isolation — no test/production split to check
  • AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
  • AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • AXR1 Runtime accessibility — compose up failed (exit 14 — a file the compose project references is missing) — time="2026-10-22T15:10:05Z" level=warning msg="The \"JWT_SECRET_KEY\" variable is not set. Defaulting to a blank string." env file .env not found: stat .env: no such file or directory; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
  • C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no data at rest for these controls to protect. If it does persist personal data (through a hosted backend configured outside this repository, for instance), the controls belong to wherever that data is stored.
  • C2 Access Controls — No access-control surface detected in the analyzed source — this repository stands up no server (no Express, Fastify, Koa, Hono, NestJS or similar app, no Next.js/SvelteKit/Nuxt server route, no edge function), creates no Supabase tables and talks to no hosted backend. Access control is therefore N/A here — a browser application or library is authorized by the server it calls, not by itself; a client-side route guard hides a page and authorizes nothing. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
  • C3 Audit Trail — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a hosted backend configured outside this repository, for instance), the trail belongs to wherever that data is stored.
  • C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data whose lifetime a retention limit would bound. If it does (through a hosted backend configured outside this repository, for instance), the limit belongs wherever that data is stored.
  • C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a TypeORM/MikroORM/sequelize-typescript/NestJS-Mongoose entity, a Mongoose schema, a Sequelize or Drizzle table, a Knex migration or a Prisma model — and no database or data-store client in the source either, so this repository keeps no personal data for a data subject to erase, export or consent over. If it does (through a hosted backend configured outside this repository, for instance), the rights are served wherever that data is stored.
  • D12 Dependency Hygiene — Dependency currency not established — this repository commits no lockfile to resolve
  • D14 License Compliance — npm licences not graded — this npm repository commits no lockfile this pass can resolve
  • D16 Bus Factor — bus factor 1 — one contributor carries this repository
  • D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
  • D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
  • D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
  • D24 Comment Value — No inline comments to assess — comment value is not applicable here.
  • D25 ADR Conformance — no ADRs to check
  • D32 Data Compliance (PII/GDPR) — 1 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
  • D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.
  • D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
  • D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
  • D4 Code Duplication — This repository's production source (.ts) is not read by D4's token comparison, which compares .NET source: duplication in it is measured by R10 Code Duplication, the frontend lens's card running the same clone algorithm over the JS/TS token stream. Not scored here — read the R10 card for this repository's duplication.
  • D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
  • D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
  • D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
  • D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
  • DM1 Aggregate boundaries — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM10 One transaction, one aggregate — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM2 Strongly-typed ids — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM3 Integration-event coupling — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM4 Rich vs anemic model — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM5 Encapsulated state — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • DM7 Repository granularity — not applicable: no DDD domain layer was detected (no aggregate, entity or value-object structure), so there is no domain model for this card to grade
  • ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
  • ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
  • ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
  • P12 CI test-gate honesty — no CI workflow found
  • P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
  • P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
  • PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for tinybench, mitata, benchmark.js, benny or vitest `bench(...)` calls in files that import them (or `*.bench.*` files), or one of those in a package.json, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
  • PF2 Allocation hygiene — Not applicable: TypeScript/JavaScript runs on a garbage-collected runtime that gives a program no allocation-control idiom to choose on a hot path — no pools, stack allocation or value types — so allocation awareness is not something this code can be rated on.
  • R5 Dependency Freshness — no package-lock.json — dependency freshness not measured (would require an npm lockfile); JS/npm CVEs are scored in D30 (Dependency Vulnerabilities), which answers every ecosystem
  • S1 Web-Security Posture — Not assessed: 125 JavaScript/TypeScript file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. That half of the dimension is clean, but it is not scored on its own: a C# repository with the same clean reading is scored on its server controls as well, or is N/A for having no web surface, and neither can be decided here. The server controls — HTTPS enforcement, HSTS, cookie flags, input validation — are NOT assessed for JavaScript/TypeScript: each is scored as an absence, an absence is only reportable over the production HTTP server, and in this ecosystem the file that opens the port is build output or a framework launcher rather than a file in the source tree. Their absence here is not a finding about this repository.
  • X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. TypeScript/JavaScript runs every callback on the one thread that owns its objects: a callback runs only when the body waiting on it has yielded, never alongside it, and a worker thread receives a COPY of what it is sent. A SharedArrayBuffer carries raw bytes, never an Array, Map or Set, so no collection is reachable from two threads at once. Not a gap in the analyzer and not a finding about your code.
  • X27 Collection changed while being enumerated — Not applicable: this check looks for a loop whose body adds to or removes from the very collection the loop is walking, invalidating the enumerator it holds, and in this repository's languages that cannot happen. JavaScript and TypeScript have no iterator that a change can invalidate: an `Array` is walked by index against its live length, and a `Map` or `Set` by the ECMAScript specification's live entry list, so a body that adds to, removes from or empties what it walks raises nothing — every loop form (`for…of`, `for…in`, `forEach`, `map`, `filter`, `reduce`, `entries()`) on every built-in collection (`Array`, `Map`, `Set`, plain objects, `URLSearchParams`, `Headers`, `FormData`) runs to completion. Such a loop can still skip an element or never end, which is a different defect and not the one this check asks about. Not a gap in the analyzer and not a finding about your code.
  • X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
  • X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
  • X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
  • X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Critical — 15 finding(s)
D31 · IaC & Container Security · High IaC · ×5
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D28 · Secrets (history) · REDACTED · ×4
  • REDACTED
  • REDACTED
  • REDACTED
  • REDACTED
D28 · Secrets (history) · High secret · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D13 · REDACTED Scanning · Leaked secret · ×2
  • REDACTED
  • REDACTED
R9 · Circular Imports · Import cycle (2 files) · ×1
  • Import cycle (2 files) src/adapters/controllers/base/Base.controller.ts:8 — src/adapters/controllers/base/Base.controller.ts → src/adapters/controllers/base/apiDoc/types.ts → src/adapters/controllers/base/Base.controller.ts (one verified cycle inside a mutually-dependent group of 4 files)
Serious — 83 finding(s)
R4 · Test Coverage · No test reaches this file · ×40
  • No test reaches this file src/infrastructure/httpClient/HttpClient.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/base/Base.controller.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/base/apiDoc/ResultDescriber.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/users/Users.controller.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/auth/Auth.controller.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file REDACTED:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/config/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/dataBases/nodeTsKeleton/User.model.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/status/Status.controller.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/controllers/base/httpResponse/HttpStatusEnum.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/middleware/error/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/application/modules/users/useCases/get/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/providers/auth/Auth.provider.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/middleware/authorization/jwt/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file tsk-gateway/src/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/providers/worker/Worker.provider.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/application/shared/iterator/BaseIterator.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/domain/shared/utils/ArrayUtil.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/app/server/HttpServer.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/middleware/localization/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/middleware/authorization/session/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/httpClient/TResponse.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/repositories/user/User.repository.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/infrastructure/middleware/trace/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • No test reaches this file src/adapters/providers/container/index.ts:1 — No test imports this module directly or transitively. Import reachability cannot see a test that executes a file by path instead of importing it, nor one that drives it through a running browser by navigating to a URL — if neither does, no test reaches this one.
  • + 15 more in this group — see findings.md.
D8 · Code Coverage · Low coverage · ×7
  • Low coverage: src/application/modules/auth/dtos/Credentials.dto.ts src/application/modules/auth/dtos/Credentials.dto.ts:1 — 0.0% line coverage (0/12).
  • Low coverage: src/application/modules/auth/dtos/TokenDto.ts src/application/modules/auth/dtos/TokenDto.ts:1 — 0.0% line coverage (0/3).
  • Low coverage: src/application/modules/auth/useCases/login/index.ts src/application/modules/auth/useCases/login/index.ts:1 — 0.0% line coverage (0/30).
  • Low coverage: src/application/modules/auth/useCases/logout/index.ts src/application/modules/auth/useCases/logout/index.ts:1 — 0.0% line coverage (0/26).
  • Low coverage: src/application/modules/users/dtos/User.dto.ts src/application/modules/users/dtos/User.dto.ts:1 — 0.0% line coverage (0/35).
  • Low coverage: src/application/modules/users/useCases/get/index.ts src/application/modules/users/useCases/get/index.ts:1 — 0.0% line coverage (0/22).
  • Low coverage: src/application/modules/users/useCases/register/index.ts src/application/modules/users/useCases/register/index.ts:1 — 0.0% line coverage (0/50).
D31 · IaC & Container Security · Medium IaC · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D35 · Change Coupling · Change coupling · ×2
  • Change coupling: Worker.provider.ts ↔ index.ts src/adapters/providers/worker/Worker.provider.ts:1 — `src/adapters/providers/worker/Worker.provider.ts` and `src/application/modules/users/useCases/register/index.ts` change together 60% of the time (6 of the 10 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 6 shared commits counted here, the most recent 3 are `5edc1417` [UPDATE]: worker provider environment strategy was implemented (#58); `ed76fc73` feature: worker provider was finish (at that commit the file was still `src/adapters/providers/worker/WorkerProvider.ts`); `5e2ae0b2` refactor: fix some test and refector way to manage errors in worker p… (at that commit the file was still `src/adapters/providers/worker/WorkerProvider.ts`) — run `git show` on any of them.
  • Change coupling: User.repository.ts ↔ index.ts src/adapters/repositories/user/User.repository.ts:1 — `src/adapters/repositories/user/User.repository.ts` and `src/application/modules/users/useCases/register/index.ts` change together 58% of the time (7 of the 12 commits that touched whichever of the two files changed less often, counting a file under its earlier names as well — a repo-wide or module-wide sweep is evidence about the sweep rather than about any pair inside it and is left out of BOTH sides of this ratio, while a dependency bump, a formatter/rename sweep, or a commit whose edit to one of the two files was a tool directive such as //go:generate or whitespace only is left out of the shared count ONLY, so the two sides are not taken over identical commit sets) with no explicit dependency — the edge is real but nothing declares it. Read the pair before acting: if one registers itself into the other through a hook or an initialiser, the missing dependency is DELIBERATE — the registration is the link, and it is meant not to be an import — and the thing to add is a comment on each side naming the other, not a merge; if they simply belong together, co-locate them; if neither holds, the coupling is hidden and worth breaking. You can check this without leaving the row: of the 7 shared commits counted here, the most recent 3 are `33d006aa` Feature/mock builder (#57); `9a6e470e` name user correction; `1291a31b` name user correction — run `git show` on any of them.
D1 · Cyclomatic Complexity · HttpClient.formData (cyclomatic 20) · ×1
  • HttpClient.formData (cyclomatic 20) src/infrastructure/httpClient/HttpClient.ts:75 — HttpClient.formData has cyclomatic complexity 20 (threshold 15). Most of this is not in the body itself: 1 of the 20 points is its own statement and the rest belongs to 6 function literals inside it that branch (lines 151, 76, 121, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D16 · Bus Factor · bus factor 1 · ×1
  • bus factor 1 — one contributor carries this repository — 3 contributor(s) have commits in this repository (automation and bot accounts excluded), but the commits of a single one of them cover most of its history — 85% of the 381 commit(s) sampled — so the number of people who actually carry it is 1. This is not the ambient state of a solo project: there ARE other contributors, and if the one who carries the repository becomes unavailable, the knowledge behind most of its history goes with them. Spread the next changes deliberately — have a second contributor review or pair on them — and write down the parts only one person can currently change.
D17 · Explicit Debt · TodoComment · ×1
  • TodoComment src/adapters/repositories/trace/UseCaseTrace.repository.ts:7 — // TODO: implement this repository method — source code is not a task system: move the work to your tracker and leave a reference instead (e.g. `// REF: #123`), so the task is planned where tasks live and the ticket links back to the code.
D2 · Cognitive Complexity · HttpClient.formData (cognitive 23) · ×1
  • HttpClient.formData (cognitive 23) src/infrastructure/httpClient/HttpClient.ts:75 — HttpClient.formData has cognitive complexity 23 (threshold 15). Drivers by points: if/else 15 (17 pts), boolean chains 4, error handling 2 (nesting depth added 2). None of this is in the body itself: all 23 points belong to 6 function literals inside it that branch (lines 151, 121, 76, …). The decisions are inside those literals, which nothing outside this body can call, review or test on its own, so splitting the enclosing body is not the move available here. To reduce it, lift the literals' work into a named function or method at the enclosing scope and have each literal call it, then reduce whichever part then reads as the largest.
D29 · Static Analysis (SAST) · REDACTED · ×1
  • REDACTED
D3 · God Classes · MethodTooLong · ×1
  • MethodTooLong: HttpClient.formData src/infrastructure/httpClient/HttpClient.ts:75 — MethodTooLong — formData runs 111 significant lines (blank, comment-only and punctuation-only lines excluded) in one body. The bar is 100 significant lines; this is 11 over it, 1.11× the bar. This is length, not branching: a long straight-line body scores low on complexity and is still read whole to change any part of it, so the complexity numbers beside this row neither confirm nor excuse it. To reduce it, extract each cohesive step of the body — the runs of statements that work on the same values and would earn the same name — into its own named unit, and have this one call them in order.
D6 · Cohesion (LCOM4) · Low cohesion · ×1
  • Low cohesion: UseCaseTrace (LCOM4 4) src/application/shared/log/UseCaseTrace.ts:18 — UseCaseTrace's methods fall into 4 groups that share no field and call none of each other, against a bar of more than 3 for this run (LCOM4, configurable — your repository's bar is the one quoted here). Each group is a set of methods reachable from one another through shared fields or direct calls, so 4 groups means the type has that many internally-connected clusters with nothing tying them together. Types whose shape makes a high count expected — and which would otherwise dominate this list — are excluded before this row is raised, so this is a genuine split candidate rather than a metric reading. It is still a shape, not a defect: confirm the groups match responsibilities you can name before splitting.
P1 · CI/CD gates · No CI pipeline · ×1
  • No CI pipeline — No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.
R10 · Code Duplication · Duplication concentrated across 3 sibling directories (6 clone groups) · ×1
  • Duplication concentrated across 3 sibling directories (6 clone groups) src/adapters/controllers/auth/Auth.controller.ts:26 — 6 duplicated blocks under src/adapters/controllers/ have copies in at least two of the sibling directories auth, status, users — 2 of them are reported below, and 4 are counted here but not reported individually: those copies match on shape but no longer clear R10's bar for an individually reported row — either they kept neither their own names nor their values, or what was copied is too small to stand on its own (it reports near-exact duplication only, and only of substantial extent). What this row states is the concentration, which the detector measured over all 6 and which does not depend on how exactly each block's copies still match. That concentration is one structural fact, not 6 local ones: the siblings replicate behaviour none of them owns, which is the shape of a missing shared module — a common library every sibling imports — rather than 6 separate extractions. Check first whether the siblings are deliberately standalone deliverables (scaffold templates, demo apps that must stay copy-pasteable); where they are, the duplication is the design and the per-block rows are the ones to act on.
R10 · Code Duplication · Duplicated block with local edits (80 matched lines × 2 locations) · ×1
  • Duplicated block with local edits (80 matched lines × 2 locations) src/adapters/controllers/auth/Auth.controller.ts:26 — src/adapters/controllers/auth/Auth.controller.ts:26 · src/adapters/controllers/users/Users.controller.ts:19 — the two spans are one implementation copied and then locally edited — 400 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R10 · Code Duplication · Duplicated block (21 lines × 3 locations) · ×1
  • Duplicated block (21 lines × 3 locations) src/adapters/controllers/auth/container/index.ts:3 — src/adapters/controllers/auth/container/index.ts:3 · src/adapters/controllers/status/container/index.ts:3 · src/adapters/controllers/users/container/index.ts:4 — the 3 copies are spread across 3 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another. There is one copy in each of 3 separate files rather than several in one place, so check first whether these are sibling modules that each declare their own version of one shape — one per entity, per provider, per language. Where they are, no single extracted module collapses them: each module still has to be written, and what recurs is the TEMPLATE. The moves that do collapse a template are to generate these modules from the set they enumerate, or to replace the repeated construction with one factory each site calls with its own values — and where the set is the point, each module pinning one distinct thing, the repetition IS the enumeration and there is nothing to delete.
R10 · Code Duplication · Duplicated block (20 lines × 2 locations) · ×1
  • Duplicated block (20 lines × 2 locations) src/adapters/controllers/users/Users.controller.ts:58 — src/adapters/controllers/users/Users.controller.ts:58 · src/adapters/controllers/users/Users.controller.ts:133 — all 2 copies are in the same file, and the CITED SPAN is a run of DECLARATIONS inside a construct — the members of a type, or the entries of an object or array literal — with no statement anywhere in it. Do not read this as an extract-a-helper row: nothing here executes, so there is no call site, and a call expression cannot stand where a member declaration or a literal's entry was. What repeats is a SHAPE, and which shape decides the move. Where the copies declare the same members, the repetition is a missing common ancestor: give it a base type, an interface both extend, a generic instantiated twice, or — where the copies are a literal's entries rather than a type's members — one shared constant each site spreads or refers to, so the set is written once. Where they declare DIFFERENT members and only the form is shared — a decorator and its options, an annotation, a registration table's keys — the form is prescribed by a framework or a schema rather than copied, and the only collapse available is to generate the declarations from that schema; where you do not own the generator, this is the cost of the framework and there is nothing to extract. Check which of the two it is before acting: these copies still drift apart the first time only one of them is edited, which is why the repetition is reported, but the sentence to act on is not the same in both cases.
R10 · Code Duplication · Duplicated block (14 lines × 3 locations) · ×1
  • Duplicated block (14 lines × 3 locations) src/adapters/controllers/base/Base.controller.ts:163 — src/adapters/controllers/base/Base.controller.ts:163 · src/adapters/controllers/base/Base.controller.ts:178 · src/adapters/controllers/base/Base.controller.ts:193 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
R10 · Code Duplication · Duplicated block (14 lines × 2 locations) · ×1
  • Duplicated block (14 lines × 2 locations) src/adapters/providers/base/Base.provider.ts:10 — src/adapters/providers/base/Base.provider.ts:10 · src/adapters/repositories/base/Base.repository.ts:8 — the 2 copies are spread across 2 directories, so the shared home is a decision rather than an obvious spot: check first whether one of them already owns this behaviour, and otherwise put the extracted module somewhere all of the sites already reach rather than making one of them depend on another.
R10 · Code Duplication · Duplicated block (12 lines × 2 locations) · ×1
  • Duplicated block (12 lines × 2 locations) src/adapters/controllers/status/Status.controller.ts:23 — src/adapters/controllers/status/Status.controller.ts:23 · src/adapters/controllers/status/Status.controller.ts:36 — all 2 copies are in the same file, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R10 · Code Duplication · Duplicated block (11 lines × 3 locations) · ×1
  • Duplicated block (11 lines × 3 locations) src/adapters/controllers/base/Base.controller.ts:81 — src/adapters/controllers/base/Base.controller.ts:81 · src/adapters/controllers/base/Base.controller.ts:93 · src/adapters/controllers/base/Base.controller.ts:105 — all 3 copies are in the same file, so extract the block into one function there and call it from every one of those sites — resolving only two of them leaves the rest to drift apart the first time one is edited.
R10 · Code Duplication · Duplicated block (11 lines × 2 locations) · ×1
  • Duplicated block (11 lines × 2 locations) src/application/modules/users/useCases/get/index.ts:41 — src/application/modules/users/useCases/get/index.ts:41 · src/application/modules/users/useCases/register/index.ts:61 — the 2 copies are spread across 2 files, and the CITED SPAN is not a self-contained block — it runs from inside one construct into the next (the tail of a branch plus the head of the following one, a run of switch arms, the end of a declaration plus the list that follows it) rather than covering a whole unit. So do not lift these lines literally: no call can be substituted for a half-open construct. Extract the enclosing repeated UNIT instead — the whole function, component or branch these lines sit in — and where the repetition IS the construct (a run of switch arms, a stack of near-identical declarations) replace it with one table or registry looked up by key rather than a helper each arm calls. The copies still drift apart the first time only one of them is edited, which is why this is reported.
R10 · Code Duplication · Duplicated block (10 lines × 2 locations) · ×1
  • Duplicated block (10 lines × 2 locations) src/application/shared/locals/messages/index.ts:9 — src/application/shared/locals/messages/index.ts:9 · src/application/shared/locals/words/index.ts:9 — the 2 copies are spread across 2 files, and the SHAPE of this repetition could not be determined. It is not a run of declarations, a listing, a declaration header, a type body or a slice through a construct — and it was not measured as a run of executable statements either, so this row cannot tell you whether a function can stand where these lines are. Read the two spans before acting, because the move is opposite in the two cases. Where they are statements, the ordinary answer holds: give the shared part one home and call it from each site. Where they turn out to be declarations, a literal's entries, or the cases of an enumeration, there is no call site to call anything from, and collapsing them would delete what each copy pins — a shared base type, a generated set, or one exported constant each site refers to is the move instead, and sometimes the honest answer is that there is nothing to extract at all. Reported because the copies drift apart the first time only one of them is edited, which is true whichever of those they are.
R10 · Code Duplication · Duplicated block (8 lines × 2 locations) · ×1
  • Duplicated block (8 lines × 2 locations) src/infrastructure/httpClient/HttpClient.ts:128 — src/infrastructure/httpClient/HttpClient.ts:128 · src/infrastructure/httpClient/HttpClient.ts:169 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
R10 · Code Duplication · Duplicated block (7 lines × 2 locations) · ×1
  • Duplicated block (7 lines × 2 locations) src/adapters/repositories/user/User.repository.ts:15 — src/adapters/repositories/user/User.repository.ts:15 · src/adapters/repositories/user/User.repository.ts:23 — both copies are in the same file, so extract the block into one function there and call it from each site — the copies drift apart the first time only one of them is edited.
R10 · Code Duplication · Duplicated block with local edits (6 matched lines × 2 locations) · ×1
  • Duplicated block with local edits (6 matched lines × 2 locations) src/application/modules/auth/dtos/Credentials.dto.ts:19 — src/application/modules/auth/dtos/Credentials.dto.ts:19 · src/application/modules/users/dtos/User.dto.ts:51 — the two spans are one implementation copied and then locally edited — 53 tokens are still identical, in the same order in both files, with only local edits between them. The copies have already begun to drift, which is this row's finding: an edit made to one and not the other changes behaviour silently. Diff the two spans first to learn what genuinely differs, then extract the shared core into one module both sites use, passing the differences in as parameters — or, if one copy exists only because the other could not be imported from its context, make one of them the single source the other is generated or re-exported from. If one copy is no longer reachable, delete it rather than letting it shadow the live one.
R7 · Dead Code · Dead file (~188 LoC) · ×1
  • Dead file (~188 LoC) src/adapters/controllers/users/Users.controller.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R7 · Dead Code · Dead file (~182 LoC) · ×1
  • Dead file (~182 LoC) src/adapters/controllers/auth/Auth.controller.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R7 · Dead Code · Dead file (~67 LoC) · ×1
  • Dead file (~67 LoC) src/application/modules/users/useCases/get/index.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/users/container/index.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
R7 · Dead Code · Dead file (~45 LoC) · ×1
  • Dead file (~45 LoC) src/application/shared/iterator/BaseIterator.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R7 · Dead Code · Dead file (~28 LoC) · ×1
  • Dead file (~28 LoC) src/adapters/controllers/users/container/index.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/users/Users.controller.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
R7 · Dead Code · Dead file (~27 LoC) · ×1
  • Dead file (~27 LoC) src/adapters/controllers/auth/container/index.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), but 1 in-repo import(s) from 1 other file(s) do name it (src/adapters/controllers/auth/Auth.controller.ts) — every one of those referrers is itself unreachable, so this file is dead only as a member of that cluster: if any referrer is in fact alive, this row falls with it
R7 · Dead Code · Dead file (~18 LoC) · ×1
  • Dead file (~18 LoC) src/domain/shared/utils/JSONfn.ts — no import path from any entry point (3 application, 2 tooling, 15 test roots considered), and no other file in the scanned tree imports it — nothing in-repo names this module at all, which is the strongest form of this claim the import graph can make
R8 · Dependency Hygiene · Unused dependency 'reflect-metadata' · ×1
  • Unused dependency 'reflect-metadata' — Declared in the root package.json but never imported anywhere in that package or its workspace members — no static import reaches it. Usually that is dead weight and attack surface, but two shapes are indistinguishable from source and are NOT dead: an optional or native peer that another dependency loads dynamically at runtime, and a package a build, docs or test step installs and invokes separately. Confirm which of the three this is before removing it.
SC1 · Supply-chain hygiene · JavaScript dependencies are not locked · ×1
  • JavaScript dependencies are not locked — No package-lock.json / yarn.lock / pnpm-lock.yaml / bun.lock — JS installs aren't reproducible (SSDF PW.4.4). Commit your package manager's lockfile and install from it (`npm ci`, `yarn --immutable`, `pnpm i --frozen-lockfile` or `bun i --frozen-lockfile`). Advisory — never scored.
X2 · Cancellation propagation · Async function without AbortSignal · ×1
  • Async function without AbortSignal: send src/infrastructure/httpClient/HttpClient.ts:278 — `send` awaits `fetch(…)` but neither accepts an AbortSignal nor passes one on, so its caller cannot stop the request once it has started. Accept `{ signal }` and pass it through: `fetch(url, { signal })`.
Minor — 27 finding(s)
P2 · Observability · Console output used as the logging channel · ×11
  • Console output used as the logging channel src/adapters/repositories/trace/UseCaseTrace.repository.ts:8 — `src/adapters/repositories/trace/UseCaseTrace.repository.ts` reports through `console.*` at line 8 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel REDACTED:54 — `REDACTED` reports through `console.*` at line 54 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel REDACTED:74 — `REDACTED` reports through `console.*` at line 74 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel REDACTED:100 — `REDACTED` reports through `console.*` at line 100 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/app/server/HttpServer.ts:21 — `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 21 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/app/server/HttpServer.ts:29 — `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 29 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/app/server/HttpServer.ts:32 — `src/infrastructure/app/server/HttpServer.ts` reports through `console.*` at line 32 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/logger/Logger.ts:8 — `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 8 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/logger/Logger.ts:12 — `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 12 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/logger/Logger.ts:16 — `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 16 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
  • Console output used as the logging channel src/infrastructure/logger/Logger.ts:20 — `src/infrastructure/logger/Logger.ts` reports through `console.*` at line 20 although other files in its module log through a logger. Console lines carry no level, fields or correlation and never reach the log pipeline.
D31 · IaC & Container Security · Low IaC · ×3
  • REDACTED
  • REDACTED
  • REDACTED
D20 · ADR Quality · No ADRs found · ×1
  • No ADRs found — No ADRs found. No recognised ADR directory (`docs/adr/`, `docs/decisions/`, `adr/`, `docs/rfcs/`, an `ADR0001/` folder, or their siblings) exists anywhere in this tree. What was searched, so you can tell an empty log from a search that missed one: every directory under the tree (build output, dependencies and VCS metadata excepted), for a document that is either any non-index page inside a recognised ADR directory, whatever its name and however deeply nested (`docs/adr/use-postgres.md`, `docs/adr/2024/0001-x.md`); or a file anywhere whose name is ADR-shaped (`0001-use-postgres.md`, `adr-012-caching.md`); or, when neither turned anything up, a document carrying the decision-record signature (an "Architecture Decision Record" heading, or Status / Context / Decision / Consequences as section headings). A decision log that clears none of these — unnumbered files outside any recognised directory, without those headings — is not seen by this check and this row is then wrong. If that is your case, say so rather than renaming anything; otherwise, consider recording architectural decisions in `docs/adr/`.
D28 · Secrets (history) · Rotate the exposed credentials · ×1
  • REDACTED
D30 · Dependency Vulnerabilities · Scanner failed to run · ×1
  • REDACTED
D34 · Knowledge Freshness · Orphaned files with no living knowledge · ×1
  • Orphaned files with no living knowledge — 1 of 13 analysed file(s) have no living knowledge left — their last meaningful change has decayed away, so if one breaks, no one currently understands it (counted over production source files of roughly 2,400 bytes or more, excluding vendored, generated and example/demo trees and test files identified by path convention, largest first; 13 of the 128 production source files in this repository met that bar). None is large enough to earn a read-through of its own, so this row stands in for the per-file rows rather than raising one each — most significant first: src/application/modules/auth/useCases/logout/index.ts. Attach the read to the next change that touches one of them: have a second person review that change, and leave behind a short comment or test recording what the file is for, so the knowledge comes back at the cost of a change you were making anyway.
D34 · Knowledge Freshness · Orphaned file · ×1
  • Orphaned file src/application/modules/auth/useCases/logout/index.ts:1 — No one still active in this repository holds living knowledge of this file: everyone who made a meaningful change to it has gone quiet, or what the current team did to it (moves, reformatting, log-level or import edits, renames) never needed understanding it. If it breaks, no one currently understands it. Attach the read to the next change that touches it: have a second person review that change, and leave behind a short comment or test recording what the file is for.
D43 · Malicious Dependencies · Scanner failed to run · ×1
  • REDACTED
M2 · Architecture documentation · No ADRs · ×1
  • No ADRs — No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
P3 · Security & performance tooling · No SAST · ×1
  • No SAST — No static application security testing detected. For this repository's stack, add CodeQL's javascript-typescript pack, `semgrep --config=p/typescript`, or eslint-plugin-security — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build. What was searched, so you can tell an absence from a miss: the 0 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
P4 · Deployment & Rollback · No rollback/health safety · ×1
  • No rollback/health safety — Deployment is orchestrated by compose, but no service declares a `healthcheck:` and nothing pins a previous image to fall back to — the runtime can tell that the container is up, not that it is serving, so a bad release is harder to detect and reverse.
R7 · Dead Code · Unused export 'default' · ×1
  • Unused export 'default' src/adapters/repositories/container/index.ts:17 — Nothing imports this binding — it is safe to review for removal.
R7 · Dead Code · Unused private field 'healthProvider' · ×1
  • Unused private field 'healthProvider' src/application/modules/status/useCases/default/index.ts:9 — Nothing in its class reads or assigns this private field (for a constructor parameter property: it is stored and never read), and no string key or test reaches it by name. Remove it, or use it where it was meant to take effect.
X2 · Cancellation propagation · Not all async functions that make a request accept an AbortSignal · ×1
  • Not all async functions that make a request accept an AbortSignal — Only 0/1 async functions that make a cancellable request (fetch, axios, ky, ofetch) accept an AbortSignal or pass one on, so a request keeps running after whatever wanted it has given up — a page navigated away from, an unmounted component, a timed-out job. Take a `signal` (or an options object that carries one) and hand it to the request; where nothing could ever cancel the call, omitting it is a deliberate choice — judge against how the function is used.
X5 · Nullable reference types · Strict null checking is not enabled everywhere the repository type-checks · ×1
  • Strict null checking is not enabled everywhere the repository type-checks — 2/3 of this repository's type-checking configuration(s) turn on strict null checking (`"strict": true`, or `"strictNullChecks": true`). A configuration that states neither is counted as OFF, because off is tsc's own default; a solution-style one whose `"files"` is empty and whose `"references"` point at other projects is in neither number, because it checks no source itself. Where it is off, `string` admits `null` and `undefined`: passing a value that is null compiles silently and throws on the first property access.
Minor — 1 finding(s)
D12 · Dependency Hygiene · Dependency hygiene PARTLY measured · ×1
  • Dependency hygiene PARTLY measured — npm pinning read, dependency currency not (no committed lockfile, so no resolved version to grade) — This repository's npm dependencies were read for PINNING discipline: 17 production declaration(s) plus 24 development one(s) across 2 package.json (2 of them the product — the rest are example, documentation or fixture manifests, which are read and counted but screened off the rules below, because both prescribe a MOVE and "align your example apps" is not a remedy), against 0 committed lockfile(s). No pinning defect was found. That is only PART of dependency hygiene, so this dimension is NOT SCORED: whether any of these packages has a newer, deprecated or abandoned release is the dependency-CURRENCY question, and answering it needs a lockfile resolved to concrete versions, which this repository does not commit: a package.json states version RANGES, and a range names no particular release to be behind. So there was nothing here for the registry to grade — that is a fact about the repository, not a reader we are missing, and no lockfile reader we could write would change it. A clean pinning pass is NOT an all-clear for these dependencies, and it is not a finding that they are all USED. Note also what is deliberately NOT charged here: a workspace legitimately carries ONE lockfile for many manifests, so no row is raised off the lockfile count, only reported. Known CVEs in the same dependency graph are a separate question again, reported under D30 wherever the manifest is OSV-readable.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

DimensionToolVersionCommandFindingsRaw output
D28 · Secrets (history)gitleaks—gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-7974325e5bcd4e6cba5e92d4524fdfba/history.json --exit-code 0 --source .4artifacts/raw/gitleaks-history.json
D28 · Secrets (history)gitleaks—gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-7974325e5bcd4e6cba5e92d4524fdfba/tree.json --exit-code 0 --source .4artifacts/raw/gitleaks-tree.json
D29 · Static Analysis (SAST)semgrep—semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off .1artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilitiesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .0—
D30 · Dependency Vulnerabilitiestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update0artifacts/raw/trivy-fs.json
D31 · IaC & Container Securitytrivy—trivy config --format json --quiet .11artifacts/raw/trivy-config.json
D32 · Data Compliance (PII/GDPR)semgrep—semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 1 file(s) — `src/infrastructure/config/Normalize.ts` — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real.0—
D36 · Supply-chain Provenance & Signingprovenance—provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .circleci, .buildkite, .woodpecker, .teamcity, .gitlab-ci.yml, .travis.yml, bitbucket-pipelines.yml, .drone.yml, .cirrus.yml, .woodpecker.yml, appveyor.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, .azuredevops/, Jenkinsfile); there is no build to attest provenance for.0—
D37 · Vulnerability-disclosure Policydisclosure—disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.0—
D40 · Network Egress Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.0—
D41 · Kernel & Syscall Confinementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.0—
D42 · Runtime Threat Enforcementruntime-hardening—runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.0—
D43 · Malicious Dependenciesosv-scanner—osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm .0—
D43 · Malicious Dependenciestrivy—trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update0artifacts/raw/trivy-fs.json

Run 01a16429-6a82-76a3-ba48-3a4e2297e15c · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Issues: 15 · Warnings: 83 · Recommendations: 27 · Info: 1 — Appendix A · all findings · full markdown report.
Generated by Watchdog — deterministic code-health analysis. 22-10-2026 @ 15:09 UTC.

Downloadable artifacts

Machine-readable and reproducible from this commit + frozen rubric — drop them straight into a contract appendix, a CRA dossier, or a downstream SCA / VEX tool.

⬇ Findings, MITRE CWE-tagged .sarif⬇ Health changelog .md