Executive summary
mikepenz/Android-Iconics scores 57 out of 100 and is rated Adequate, while four of its six lenses score higher still: Code Health at 85 and Architecture at 84, both rated Strong, and Security and Compliance at 78 and Performance at 62, both rated Adequate.
The score is lower than those four because the weakest lens counts most, and here that is Maturity, which scores 51 and is rated Adequate. Its Architecture documentation dimension scores 0 out of 10, and until that reaches 4, Maturity can't be rated higher than Adequate. The first actions are to resolve the 1 No ADRs found finding(s) in ADR Quality and to resolve the 1 Documentation finding(s) in Documentation Quality, and if Maturity rose to 70, the score would rise from 57 to about 62.
19 findings are critical: ten in Static Analysis (SAST), five in Knowledge Freshness, three in Dependency Vulnerabilities and one in Dependency direction.
Watchdog couldn't measure 9 dimensions in this code, among them Code Coverage, Test Reliability and Navigability, so they are left out of the score. The product code is 37,212 lines, which would take an estimated 0.3 person-years, around €39,000, to rebuild.
If Maturity rose from 51 to 70, the lowest score rated Strong, the score would rise from 57 to about 62.
New since the last survey: 1 finding
- Supply-chain Provenance & Signing · REDACTED
Fixed since the last survey: 1 finding
- Supply-chain Provenance & Signing REDACTED
Rebuild cost: about €39,000 · Estimate
| Cost to rebuild | €13,000 to €64,000, for 213 to 677 hours of work, about 0.3 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×0.8 at a score of 57. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Medium: 37,212 lines of product code |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 animation.IconicsAnimationProcessor | 2 animation.SpinProcessor | 3 typeface | 4 Iconics | 5 animation.IconicsAnimatedDrawable | 6 sample.typeface.CustomFont | 7 typeface.library.community.material.CommunityMaterial | 8 typeface.library.devicon.DevIcon | 9 typeface.library.entypo.Entypo | 10 typeface.library.fontawesome.FontAwesome | 11 typeface.library.fontawesome.FontAwesomeBrand | 12 typeface.library.fontawesome.FontAwesomeRegular | 13 typeface.library.foundationicons.FoundationIcons | 14 typeface.library.googlematerial.GoogleMaterial | 15 typeface.library.googlematerial.OutlinedGoogleMaterial | 16 typeface.library.googlematerial.RoundedGoogleMaterial | 17 typeface.library.googlematerial.SharpGoogleMaterial | 18 typeface.library.ionicons.Ionicons | 19 typeface.library.materialdesigndx.MaterialDesignDx | 20 typeface.library.materialdesigniconic.MaterialDesignIconic | 21 typeface.library.materialsymbols.OutlinedMaterialSymbols | 22 typeface.library.meteoconcs.Meteoconcs | 23 typeface.library.octicons.Octicons | 24 typeface.library.phosphor.Phosphor | 25 typeface.library.pixeden7stroke.Pixeden7Stroke | 26 typeface.library.simpleicons.SimpleIcons | 27 typeface.library.typeicons.Typeicons | 28 typeface.library.weathericons.WeatherIcons | 29 view.IconicsCheckableTextView | 30 animation | 31 utils | 32 com.mikepenz.iconics | 33 IconicsColor | 34 context | 35 dsl | 36 internal | 37 view | 38 sample.item.IconItem | 39 sample.item | 40 sample |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 animation.IconicsAnimationProcessor | ||||||||||||||||||||||||||||||||||||||||
| 2 animation.SpinProcessor | ||||||||||||||||||||||||||||||||||||||||
| 3 typeface | ||||||||||||||||||||||||||||||||||||||||
| 4 Iconics | 4 | |||||||||||||||||||||||||||||||||||||||
| 5 animation.IconicsAnimatedDrawable | 1 | |||||||||||||||||||||||||||||||||||||||
| 6 sample.typeface.CustomFont | 2 | |||||||||||||||||||||||||||||||||||||||
| 7 typeface.library.community.material.CommunityMaterial | 6 | |||||||||||||||||||||||||||||||||||||||
| 8 typeface.library.devicon.DevIcon | 2 | |||||||||||||||||||||||||||||||||||||||
| 9 typeface.library.entypo.Entypo | 2 | |||||||||||||||||||||||||||||||||||||||
| 10 typeface.library.fontawesome.FontAwesome | 2 | |||||||||||||||||||||||||||||||||||||||
| 11 typeface.library.fontawesome.FontAwesomeBrand | 2 | |||||||||||||||||||||||||||||||||||||||
| 12 typeface.library.fontawesome.FontAwesomeRegular | 2 | |||||||||||||||||||||||||||||||||||||||
| 13 typeface.library.foundationicons.FoundationIcons | 2 | |||||||||||||||||||||||||||||||||||||||
| 14 typeface.library.googlematerial.GoogleMaterial | 2 | |||||||||||||||||||||||||||||||||||||||
| 15 typeface.library.googlematerial.OutlinedGoogleMaterial | 2 | |||||||||||||||||||||||||||||||||||||||
| 16 typeface.library.googlematerial.RoundedGoogleMaterial | 2 | |||||||||||||||||||||||||||||||||||||||
| 17 typeface.library.googlematerial.SharpGoogleMaterial | 2 | |||||||||||||||||||||||||||||||||||||||
| 18 typeface.library.ionicons.Ionicons | 2 | |||||||||||||||||||||||||||||||||||||||
| 19 typeface.library.materialdesigndx.MaterialDesignDx | 2 | |||||||||||||||||||||||||||||||||||||||
| 20 typeface.library.materialdesigniconic.MaterialDesignIconic | 2 | |||||||||||||||||||||||||||||||||||||||
| 21 typeface.library.materialsymbols.OutlinedMaterialSymbols | 4 | |||||||||||||||||||||||||||||||||||||||
| 22 typeface.library.meteoconcs.Meteoconcs | 2 | |||||||||||||||||||||||||||||||||||||||
| 23 typeface.library.octicons.Octicons | 2 | |||||||||||||||||||||||||||||||||||||||
| 24 typeface.library.phosphor.Phosphor | 4 | |||||||||||||||||||||||||||||||||||||||
| 25 typeface.library.pixeden7stroke.Pixeden7Stroke | 2 | |||||||||||||||||||||||||||||||||||||||
| 26 typeface.library.simpleicons.SimpleIcons | 2 | |||||||||||||||||||||||||||||||||||||||
| 27 typeface.library.typeicons.Typeicons | 2 | |||||||||||||||||||||||||||||||||||||||
| 28 typeface.library.weathericons.WeatherIcons | 2 | |||||||||||||||||||||||||||||||||||||||
| 29 view.IconicsCheckableTextView | 1 | |||||||||||||||||||||||||||||||||||||||
| 30 animation | 4 | 1 | 2 | 1 | 6 | |||||||||||||||||||||||||||||||||||
| 31 utils | 5 | 1 | 10 | |||||||||||||||||||||||||||||||||||||
| 32 com.mikepenz.iconics | 5 | 2 | 1 | |||||||||||||||||||||||||||||||||||||
| 33 IconicsColor | 1 | |||||||||||||||||||||||||||||||||||||||
| 34 context | 2 | |||||||||||||||||||||||||||||||||||||||
| 35 dsl | 1 | 4 | ||||||||||||||||||||||||||||||||||||||
| 36 internal | 5 | |||||||||||||||||||||||||||||||||||||||
| 37 view | 1 | 5 | 7 | |||||||||||||||||||||||||||||||||||||
| 38 sample.item.IconItem | 1 | |||||||||||||||||||||||||||||||||||||||
| 39 sample.item | 1 | |||||||||||||||||||||||||||||||||||||||
| 40 sample | 2 | 1 |
4→3 Iconics uses typeface✕
- Connections
- 4 pairs of types, where a type in Iconics uses a type in typeface.
- The types involved
com.mikepenz.iconics.Iconics.Builder→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.Iconics.Builder→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.Iconics.BuilderString→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.Iconics.BuilderView→com.mikepenz.iconics.typeface.ITypeface
- Direction
- Iconics uses typeface, so a change to typeface can break Iconics, while a change to Iconics can't break typeface.
- Position
- Below the diagonal: Iconics uses a module listed above it, which is the healthy direction.
5→30 animation.IconicsAnimatedDrawable uses animation part of a loop✕
- Connections
- 1 pair of types, where a type in animation.IconicsAnimatedDrawable uses a type in animation.
- The types involved
com.mikepenz.iconics.animation.IconicsAnimatedDrawable.Runner→com.mikepenz.iconics.animation.IconicsAnimatedDrawable
- Direction
- animation.IconicsAnimatedDrawable uses animation, so a change to animation can break animation.IconicsAnimatedDrawable, while a change to animation.IconicsAnimatedDrawable can't break animation.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
6→3 sample.typeface.CustomFont uses typeface✕
- Connections
- 2 pairs of types, where a type in sample.typeface.CustomFont uses a type in typeface.
- The types involved
com.mikepenz.iconics.sample.typeface.CustomFont.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.sample.typeface.CustomFont.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- sample.typeface.CustomFont uses typeface, so a change to typeface can break sample.typeface.CustomFont, while a change to sample.typeface.CustomFont can't break typeface.
- Position
- Below the diagonal: sample.typeface.CustomFont uses a module listed above it, which is the healthy direction.
7→3 typeface.library.community.material.CommunityMaterial uses typeface✕
- Connections
- 6 pairs of types, where a type in typeface.library.community.material.CommunityMaterial uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon2→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon2→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon3→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.community.material.CommunityMaterial.Icon3→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.community.material.CommunityMaterial uses typeface, so a change to typeface can break typeface.library.community.material.CommunityMaterial, while a change to typeface.library.community.material.CommunityMaterial can't break typeface.
- Position
- Below the diagonal: typeface.library.community.material.CommunityMaterial uses a module listed above it, which is the healthy direction.
8→3 typeface.library.devicon.DevIcon uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.devicon.DevIcon uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.devicon.DevIcon.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.devicon.DevIcon.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.devicon.DevIcon uses typeface, so a change to typeface can break typeface.library.devicon.DevIcon, while a change to typeface.library.devicon.DevIcon can't break typeface.
- Position
- Below the diagonal: typeface.library.devicon.DevIcon uses a module listed above it, which is the healthy direction.
9→3 typeface.library.entypo.Entypo uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.entypo.Entypo uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.entypo.Entypo.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.entypo.Entypo.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.entypo.Entypo uses typeface, so a change to typeface can break typeface.library.entypo.Entypo, while a change to typeface.library.entypo.Entypo can't break typeface.
- Position
- Below the diagonal: typeface.library.entypo.Entypo uses a module listed above it, which is the healthy direction.
10→3 typeface.library.fontawesome.FontAwesome uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.fontawesome.FontAwesome uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.fontawesome.FontAwesome.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.fontawesome.FontAwesome.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.fontawesome.FontAwesome uses typeface, so a change to typeface can break typeface.library.fontawesome.FontAwesome, while a change to typeface.library.fontawesome.FontAwesome can't break typeface.
- Position
- Below the diagonal: typeface.library.fontawesome.FontAwesome uses a module listed above it, which is the healthy direction.
11→3 typeface.library.fontawesome.FontAwesomeBrand uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.fontawesome.FontAwesomeBrand uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.fontawesome.FontAwesomeBrand.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.fontawesome.FontAwesomeBrand.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.fontawesome.FontAwesomeBrand uses typeface, so a change to typeface can break typeface.library.fontawesome.FontAwesomeBrand, while a change to typeface.library.fontawesome.FontAwesomeBrand can't break typeface.
- Position
- Below the diagonal: typeface.library.fontawesome.FontAwesomeBrand uses a module listed above it, which is the healthy direction.
12→3 typeface.library.fontawesome.FontAwesomeRegular uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.fontawesome.FontAwesomeRegular uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.fontawesome.FontAwesomeRegular.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.fontawesome.FontAwesomeRegular.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.fontawesome.FontAwesomeRegular uses typeface, so a change to typeface can break typeface.library.fontawesome.FontAwesomeRegular, while a change to typeface.library.fontawesome.FontAwesomeRegular can't break typeface.
- Position
- Below the diagonal: typeface.library.fontawesome.FontAwesomeRegular uses a module listed above it, which is the healthy direction.
13→3 typeface.library.foundationicons.FoundationIcons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.foundationicons.FoundationIcons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.foundationicons.FoundationIcons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.foundationicons.FoundationIcons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.foundationicons.FoundationIcons uses typeface, so a change to typeface can break typeface.library.foundationicons.FoundationIcons, while a change to typeface.library.foundationicons.FoundationIcons can't break typeface.
- Position
- Below the diagonal: typeface.library.foundationicons.FoundationIcons uses a module listed above it, which is the healthy direction.
14→3 typeface.library.googlematerial.GoogleMaterial uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.googlematerial.GoogleMaterial uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.googlematerial.GoogleMaterial.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.googlematerial.GoogleMaterial.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.googlematerial.GoogleMaterial uses typeface, so a change to typeface can break typeface.library.googlematerial.GoogleMaterial, while a change to typeface.library.googlematerial.GoogleMaterial can't break typeface.
- Position
- Below the diagonal: typeface.library.googlematerial.GoogleMaterial uses a module listed above it, which is the healthy direction.
15→3 typeface.library.googlematerial.OutlinedGoogleMaterial uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.googlematerial.OutlinedGoogleMaterial uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.googlematerial.OutlinedGoogleMaterial.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.googlematerial.OutlinedGoogleMaterial.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.googlematerial.OutlinedGoogleMaterial uses typeface, so a change to typeface can break typeface.library.googlematerial.OutlinedGoogleMaterial, while a change to typeface.library.googlematerial.OutlinedGoogleMaterial can't break typeface.
- Position
- Below the diagonal: typeface.library.googlematerial.OutlinedGoogleMaterial uses a module listed above it, which is the healthy direction.
16→3 typeface.library.googlematerial.RoundedGoogleMaterial uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.googlematerial.RoundedGoogleMaterial uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.googlematerial.RoundedGoogleMaterial.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.googlematerial.RoundedGoogleMaterial.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.googlematerial.RoundedGoogleMaterial uses typeface, so a change to typeface can break typeface.library.googlematerial.RoundedGoogleMaterial, while a change to typeface.library.googlematerial.RoundedGoogleMaterial can't break typeface.
- Position
- Below the diagonal: typeface.library.googlematerial.RoundedGoogleMaterial uses a module listed above it, which is the healthy direction.
17→3 typeface.library.googlematerial.SharpGoogleMaterial uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.googlematerial.SharpGoogleMaterial uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.googlematerial.SharpGoogleMaterial.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.googlematerial.SharpGoogleMaterial.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.googlematerial.SharpGoogleMaterial uses typeface, so a change to typeface can break typeface.library.googlematerial.SharpGoogleMaterial, while a change to typeface.library.googlematerial.SharpGoogleMaterial can't break typeface.
- Position
- Below the diagonal: typeface.library.googlematerial.SharpGoogleMaterial uses a module listed above it, which is the healthy direction.
18→3 typeface.library.ionicons.Ionicons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.ionicons.Ionicons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.ionicons.Ionicons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.ionicons.Ionicons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.ionicons.Ionicons uses typeface, so a change to typeface can break typeface.library.ionicons.Ionicons, while a change to typeface.library.ionicons.Ionicons can't break typeface.
- Position
- Below the diagonal: typeface.library.ionicons.Ionicons uses a module listed above it, which is the healthy direction.
19→3 typeface.library.materialdesigndx.MaterialDesignDx uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.materialdesigndx.MaterialDesignDx uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.materialdesigndx.MaterialDesignDx.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.materialdesigndx.MaterialDesignDx.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.materialdesigndx.MaterialDesignDx uses typeface, so a change to typeface can break typeface.library.materialdesigndx.MaterialDesignDx, while a change to typeface.library.materialdesigndx.MaterialDesignDx can't break typeface.
- Position
- Below the diagonal: typeface.library.materialdesigndx.MaterialDesignDx uses a module listed above it, which is the healthy direction.
20→3 typeface.library.materialdesigniconic.MaterialDesignIconic uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.materialdesigniconic.MaterialDesignIconic uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.materialdesigniconic.MaterialDesignIconic.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.materialdesigniconic.MaterialDesignIconic.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.materialdesigniconic.MaterialDesignIconic uses typeface, so a change to typeface can break typeface.library.materialdesigniconic.MaterialDesignIconic, while a change to typeface.library.materialdesigniconic.MaterialDesignIconic can't break typeface.
- Position
- Below the diagonal: typeface.library.materialdesigniconic.MaterialDesignIconic uses a module listed above it, which is the healthy direction.
21→3 typeface.library.materialsymbols.OutlinedMaterialSymbols uses typeface✕
- Connections
- 4 pairs of types, where a type in typeface.library.materialsymbols.OutlinedMaterialSymbols uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.materialsymbols.OutlinedMaterialSymbols.Icon1→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.materialsymbols.OutlinedMaterialSymbols.Icon1→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.typeface.library.materialsymbols.OutlinedMaterialSymbols.Icon2→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.materialsymbols.OutlinedMaterialSymbols.Icon2→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.materialsymbols.OutlinedMaterialSymbols uses typeface, so a change to typeface can break typeface.library.materialsymbols.OutlinedMaterialSymbols, while a change to typeface.library.materialsymbols.OutlinedMaterialSymbols can't break typeface.
- Position
- Below the diagonal: typeface.library.materialsymbols.OutlinedMaterialSymbols uses a module listed above it, which is the healthy direction.
22→3 typeface.library.meteoconcs.Meteoconcs uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.meteoconcs.Meteoconcs uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.meteoconcs.Meteoconcs.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.meteoconcs.Meteoconcs.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.meteoconcs.Meteoconcs uses typeface, so a change to typeface can break typeface.library.meteoconcs.Meteoconcs, while a change to typeface.library.meteoconcs.Meteoconcs can't break typeface.
- Position
- Below the diagonal: typeface.library.meteoconcs.Meteoconcs uses a module listed above it, which is the healthy direction.
23→3 typeface.library.octicons.Octicons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.octicons.Octicons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.octicons.Octicons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.octicons.Octicons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.octicons.Octicons uses typeface, so a change to typeface can break typeface.library.octicons.Octicons, while a change to typeface.library.octicons.Octicons can't break typeface.
- Position
- Below the diagonal: typeface.library.octicons.Octicons uses a module listed above it, which is the healthy direction.
24→3 typeface.library.phosphor.Phosphor uses typeface✕
- Connections
- 4 pairs of types, where a type in typeface.library.phosphor.Phosphor uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.phosphor.Phosphor.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.phosphor.Phosphor.Icon→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.typeface.library.phosphor.Phosphor.Icon2→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.phosphor.Phosphor.Icon2→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.phosphor.Phosphor uses typeface, so a change to typeface can break typeface.library.phosphor.Phosphor, while a change to typeface.library.phosphor.Phosphor can't break typeface.
- Position
- Below the diagonal: typeface.library.phosphor.Phosphor uses a module listed above it, which is the healthy direction.
25→3 typeface.library.pixeden7stroke.Pixeden7Stroke uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.pixeden7stroke.Pixeden7Stroke uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.pixeden7stroke.Pixeden7Stroke.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.pixeden7stroke.Pixeden7Stroke.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.pixeden7stroke.Pixeden7Stroke uses typeface, so a change to typeface can break typeface.library.pixeden7stroke.Pixeden7Stroke, while a change to typeface.library.pixeden7stroke.Pixeden7Stroke can't break typeface.
- Position
- Below the diagonal: typeface.library.pixeden7stroke.Pixeden7Stroke uses a module listed above it, which is the healthy direction.
26→3 typeface.library.simpleicons.SimpleIcons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.simpleicons.SimpleIcons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.simpleicons.SimpleIcons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.simpleicons.SimpleIcons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.simpleicons.SimpleIcons uses typeface, so a change to typeface can break typeface.library.simpleicons.SimpleIcons, while a change to typeface.library.simpleicons.SimpleIcons can't break typeface.
- Position
- Below the diagonal: typeface.library.simpleicons.SimpleIcons uses a module listed above it, which is the healthy direction.
27→3 typeface.library.typeicons.Typeicons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.typeicons.Typeicons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.typeicons.Typeicons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.typeicons.Typeicons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.typeicons.Typeicons uses typeface, so a change to typeface can break typeface.library.typeicons.Typeicons, while a change to typeface.library.typeicons.Typeicons can't break typeface.
- Position
- Below the diagonal: typeface.library.typeicons.Typeicons uses a module listed above it, which is the healthy direction.
28→3 typeface.library.weathericons.WeatherIcons uses typeface✕
- Connections
- 2 pairs of types, where a type in typeface.library.weathericons.WeatherIcons uses a type in typeface.
- The types involved
com.mikepenz.iconics.typeface.library.weathericons.WeatherIcons.Icon→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.typeface.library.weathericons.WeatherIcons.Icon→com.mikepenz.iconics.typeface.ITypeface
- Direction
- typeface.library.weathericons.WeatherIcons uses typeface, so a change to typeface can break typeface.library.weathericons.WeatherIcons, while a change to typeface.library.weathericons.WeatherIcons can't break typeface.
- Position
- Below the diagonal: typeface.library.weathericons.WeatherIcons uses a module listed above it, which is the healthy direction.
29→37 view.IconicsCheckableTextView uses view part of a loop✕
- Connections
- 1 pair of types, where a type in view.IconicsCheckableTextView uses a type in view.
- The types involved
com.mikepenz.iconics.view.IconicsCheckableTextView.OnCheckedChangeListener→com.mikepenz.iconics.view.IconicsCheckableTextView
- Direction
- view.IconicsCheckableTextView uses view, so a change to view can break view.IconicsCheckableTextView, while a change to view.IconicsCheckableTextView can't break view.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
30→1 animation uses animation.IconicsAnimationProcessor✕
- Connections
- 4 pairs of types, where a type in animation uses a type in animation.IconicsAnimationProcessor.
- The types involved
com.mikepenz.iconics.animation.BlinkAlphaProcessor→com.mikepenz.iconics.animation.IconicsAnimationProcessor.RepeatModecom.mikepenz.iconics.animation.BlinkScaleProcessor→com.mikepenz.iconics.animation.IconicsAnimationProcessor.RepeatModecom.mikepenz.iconics.animation.IconicsAnimationProcessor→com.mikepenz.iconics.animation.IconicsAnimationProcessor.RepeatModecom.mikepenz.iconics.animation.SpinProcessor→com.mikepenz.iconics.animation.IconicsAnimationProcessor.RepeatMode
- Direction
- animation uses animation.IconicsAnimationProcessor, so a change to animation.IconicsAnimationProcessor can break animation, while a change to animation can't break animation.IconicsAnimationProcessor.
- Position
- Below the diagonal: animation uses a module listed above it, which is the healthy direction.
30→2 animation uses animation.SpinProcessor✕
- Connections
- 1 pair of types, where a type in animation uses a type in animation.SpinProcessor.
- The types involved
com.mikepenz.iconics.animation.SpinProcessor→com.mikepenz.iconics.animation.SpinProcessor.Direction
- Direction
- animation uses animation.SpinProcessor, so a change to animation.SpinProcessor can break animation, while a change to animation can't break animation.SpinProcessor.
- Position
- Below the diagonal: animation uses a module listed above it, which is the healthy direction.
30→3 animation uses typeface✕
- Connections
- 2 pairs of types, where a type in animation uses a type in typeface.
- The types involved
com.mikepenz.iconics.animation.IconicsAnimatedDrawable→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.animation.IconicsAnimatedDrawable→com.mikepenz.iconics.typeface.ITypeface
- Direction
- animation uses typeface, so a change to typeface can break animation, while a change to animation can't break typeface.
- Position
- Below the diagonal: animation uses a module listed above it, which is the healthy direction.
30→5 animation uses animation.IconicsAnimatedDrawable✕
- Connections
- 1 pair of types, where a type in animation uses a type in animation.IconicsAnimatedDrawable.
- The types involved
com.mikepenz.iconics.animation.IconicsAnimatedDrawable→com.mikepenz.iconics.animation.IconicsAnimatedDrawable.Runner
- Direction
- animation uses animation.IconicsAnimatedDrawable, so a change to animation.IconicsAnimatedDrawable can break animation, while a change to animation can't break animation.IconicsAnimatedDrawable.
- Position
- Below the diagonal: animation uses a module listed above it, which is the healthy direction.
30→32 animation uses com.mikepenz.iconics part of a loop✕
- Connections
- 6 pairs of types, where a type in animation uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.animation.BlinkAlphaProcessor→com.mikepenz.iconics.IconicsBrushcom.mikepenz.iconics.animation.BlinkScaleProcessor→com.mikepenz.iconics.IconicsBrushcom.mikepenz.iconics.animation.IconicsAnimatedDrawable→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.animation.IconicsAnimationExtensionsKt→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.animation.IconicsAnimationProcessor→com.mikepenz.iconics.IconicsBrushcom.mikepenz.iconics.animation.SpinProcessor→com.mikepenz.iconics.IconicsBrush
- Direction
- animation uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break animation, while a change to animation can't break com.mikepenz.iconics.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
31→3 utils uses typeface✕
- Connections
- 5 pairs of types, where a type in utils uses a type in typeface.
- The types involved
com.mikepenz.iconics.utils.IconicsDrawableExtensionsKt→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.utils.IconicsDrawableExtensionsKt→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.utils.IconicsDrawableProducerExtensionsKt→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.utils.InternalIconicsUtils→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.utils.StyleContainer→com.mikepenz.iconics.typeface.ITypeface
- Direction
- utils uses typeface, so a change to typeface can break utils, while a change to utils can't break typeface.
- Position
- Below the diagonal: utils uses a module listed above it, which is the healthy direction.
31→4 utils uses Iconics✕
- Connections
- 1 pair of types, where a type in utils uses a type in Iconics.
- The types involved
com.mikepenz.iconics.utils.IconicsExtensionsKt→com.mikepenz.iconics.Iconics.Builder
- Direction
- utils uses Iconics, so a change to Iconics can break utils, while a change to utils can't break Iconics.
- Position
- Below the diagonal: utils uses a module listed above it, which is the healthy direction.
31→32 utils uses com.mikepenz.iconics part of a loop✕
- Connections
- 10 pairs of types, where a type in utils uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.utils.IconicsConvertersKt→com.mikepenz.iconics.IconicsColorcom.mikepenz.iconics.utils.IconicsConvertersKt→com.mikepenz.iconics.IconicsSizecom.mikepenz.iconics.utils.IconicsDrawableExtensionsKt→com.mikepenz.iconics.IconicsColorcom.mikepenz.iconics.utils.IconicsDrawableExtensionsKt→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.utils.IconicsDrawableExtensionsKt→com.mikepenz.iconics.IconicsSizecom.mikepenz.iconics.utils.IconicsDrawableProducerExtensionsKt→com.mikepenz.iconics.IconicsColorcom.mikepenz.iconics.utils.IconicsDrawableProducerExtensionsKt→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.utils.IconicsDrawableProducerExtensionsKt→com.mikepenz.iconics.IconicsSizecom.mikepenz.iconics.utils.IconicsExtensionsKt→com.mikepenz.iconics.IconicsArrayBuildercom.mikepenz.iconics.utils.IconicsExtensionsKt→com.mikepenz.iconics.IconicsDrawable
- Direction
- utils uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break utils, while a change to utils can't break com.mikepenz.iconics.
- Position
- Above the diagonal, so it is part of a loop. Neither module can be changed, tested or released on its own until one of these dependencies is removed.
32→3 com.mikepenz.iconics uses typeface✕
- Connections
- 5 pairs of types, where a type in com.mikepenz.iconics uses a type in typeface.
- The types involved
com.mikepenz.iconics.Iconics→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.Iconics→com.mikepenz.iconics.typeface.ITypefacecom.mikepenz.iconics.IconicsArrayBuilder→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.IconicsDrawable→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.IconicsDrawable→com.mikepenz.iconics.typeface.ITypeface
- Direction
- com.mikepenz.iconics uses typeface, so a change to typeface can break com.mikepenz.iconics, while a change to com.mikepenz.iconics can't break typeface.
- Position
- Below the diagonal: com.mikepenz.iconics uses a module listed above it, which is the healthy direction.
32→30 com.mikepenz.iconics uses animation✕
- Connections
- 2 pairs of types, where a type in com.mikepenz.iconics uses a type in animation.
- The types involved
com.mikepenz.iconics.Iconics→com.mikepenz.iconics.animation.IconicsAnimationProcessorcom.mikepenz.iconics.IconicsDrawable→com.mikepenz.iconics.animation.IconicsAnimatedDrawable
- Direction
- com.mikepenz.iconics uses animation, so a change to animation can break com.mikepenz.iconics, while a change to com.mikepenz.iconics can't break animation.
- Position
- Below the diagonal: com.mikepenz.iconics uses a module listed above it, which is the healthy direction.
32→31 com.mikepenz.iconics uses utils✕
- Connections
- 1 pair of types, where a type in com.mikepenz.iconics uses a type in utils.
- The types involved
com.mikepenz.iconics.Iconics→com.mikepenz.iconics.utils.IconicsLogger
- Direction
- com.mikepenz.iconics uses utils, so a change to utils can break com.mikepenz.iconics, while a change to com.mikepenz.iconics can't break utils.
- Position
- Below the diagonal: com.mikepenz.iconics uses a module listed above it, which is the healthy direction.
33→32 IconicsColor uses com.mikepenz.iconics✕
- Connections
- 1 pair of types, where a type in IconicsColor uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.IconicsColor.Companion→com.mikepenz.iconics.IconicsColor
- Direction
- IconicsColor uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break IconicsColor, while a change to IconicsColor can't break com.mikepenz.iconics.
- Position
- Below the diagonal: IconicsColor uses a module listed above it, which is the healthy direction.
34→32 context uses com.mikepenz.iconics✕
- Connections
- 2 pairs of types, where a type in context uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.context.IconicsAttrsApplier→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.context.IconicsAttrsExtractor→com.mikepenz.iconics.IconicsDrawable
- Direction
- context uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break context, while a change to context can't break com.mikepenz.iconics.
- Position
- Below the diagonal: context uses a module listed above it, which is the healthy direction.
35→3 dsl uses typeface✕
- Connections
- 1 pair of types, where a type in dsl uses a type in typeface.
- The types involved
com.mikepenz.iconics.dsl.IconicsDrawableDslKt→com.mikepenz.iconics.typeface.IIcon
- Direction
- dsl uses typeface, so a change to typeface can break dsl, while a change to dsl can't break typeface.
- Position
- Below the diagonal: dsl uses a module listed above it, which is the healthy direction.
35→32 dsl uses com.mikepenz.iconics✕
- Connections
- 4 pairs of types, where a type in dsl uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.dsl.IconicsDrawableDsl→com.mikepenz.iconics.IconicsColorcom.mikepenz.iconics.dsl.IconicsDrawableDsl→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.dsl.IconicsDrawableDsl→com.mikepenz.iconics.IconicsSizecom.mikepenz.iconics.dsl.IconicsDrawableDslKt→com.mikepenz.iconics.IconicsDrawable
- Direction
- dsl uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break dsl, while a change to dsl can't break com.mikepenz.iconics.
- Position
- Below the diagonal: dsl uses a module listed above it, which is the healthy direction.
36→32 internal uses com.mikepenz.iconics✕
- Connections
- 5 pairs of types, where a type in internal uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.internal.CheckableIconBundle→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.internal.CheckedCompoundIconicsDrawables→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.internal.CompoundIconicsDrawables→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.internal.CompoundIconsBundle→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.internal.IconicsViewsAttrsApplier→com.mikepenz.iconics.IconicsDrawable
- Direction
- internal uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break internal, while a change to internal can't break com.mikepenz.iconics.
- Position
- Below the diagonal: internal uses a module listed above it, which is the healthy direction.
37→29 view uses view.IconicsCheckableTextView✕
- Connections
- 1 pair of types, where a type in view uses a type in view.IconicsCheckableTextView.
- The types involved
com.mikepenz.iconics.view.IconicsCheckableTextView→com.mikepenz.iconics.view.IconicsCheckableTextView.OnCheckedChangeListener
- Direction
- view uses view.IconicsCheckableTextView, so a change to view.IconicsCheckableTextView can break view, while a change to view can't break view.IconicsCheckableTextView.
- Position
- Below the diagonal: view uses a module listed above it, which is the healthy direction.
37→32 view uses com.mikepenz.iconics✕
- Connections
- 5 pairs of types, where a type in view uses a type in com.mikepenz.iconics.
- The types involved
com.mikepenz.iconics.view.IconicsButton→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.view.IconicsCheckableTextView→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.view.IconicsCompoundButton→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.view.IconicsImageView→com.mikepenz.iconics.IconicsDrawablecom.mikepenz.iconics.view.IconicsTextView→com.mikepenz.iconics.IconicsDrawable
- Direction
- view uses com.mikepenz.iconics, so a change to com.mikepenz.iconics can break view, while a change to view can't break com.mikepenz.iconics.
- Position
- Below the diagonal: view uses a module listed above it, which is the healthy direction.
37→36 view uses internal✕
- Connections
- 7 pairs of types, where a type in view uses a type in internal.
- The types involved
com.mikepenz.iconics.view.IconicsButton→com.mikepenz.iconics.internal.CompoundIconicsDrawablescom.mikepenz.iconics.view.IconicsButton→com.mikepenz.iconics.internal.CompoundIconsBundlecom.mikepenz.iconics.view.IconicsCheckableTextView→com.mikepenz.iconics.internal.CheckedCompoundIconicsDrawablescom.mikepenz.iconics.view.IconicsCheckableTextView→com.mikepenz.iconics.internal.CompoundIconsBundlecom.mikepenz.iconics.view.IconicsCompoundButton→com.mikepenz.iconics.internal.CheckableIconBundlecom.mikepenz.iconics.view.IconicsTextView→com.mikepenz.iconics.internal.CompoundIconicsDrawablescom.mikepenz.iconics.view.IconicsTextView→com.mikepenz.iconics.internal.CompoundIconsBundle
- Direction
- view uses internal, so a change to internal can break view, while a change to view can't break internal.
- Position
- Below the diagonal: view uses a module listed above it, which is the healthy direction.
38→37 sample.item.IconItem uses view✕
- Connections
- 1 pair of types, where a type in sample.item.IconItem uses a type in view.
- The types involved
com.mikepenz.iconics.sample.item.IconItem.ViewHolder→com.mikepenz.iconics.view.IconicsImageView
- Direction
- sample.item.IconItem uses view, so a change to view can break sample.item.IconItem, while a change to sample.item.IconItem can't break view.
- Position
- Below the diagonal: sample.item.IconItem uses a module listed above it, which is the healthy direction.
39→38 sample.item uses sample.item.IconItem✕
- Connections
- 1 pair of types, where a type in sample.item uses a type in sample.item.IconItem.
- The types involved
com.mikepenz.iconics.sample.item.IconItem→com.mikepenz.iconics.sample.item.IconItem.ViewHolder
- Direction
- sample.item uses sample.item.IconItem, so a change to sample.item.IconItem can break sample.item, while a change to sample.item can't break sample.item.IconItem.
- Position
- Below the diagonal: sample.item uses a module listed above it, which is the healthy direction.
40→3 sample uses typeface✕
- Connections
- 2 pairs of types, where a type in sample uses a type in typeface.
- The types involved
com.mikepenz.iconics.sample.MainActivity→com.mikepenz.iconics.typeface.IIconcom.mikepenz.iconics.sample.MainActivity→com.mikepenz.iconics.typeface.ITypeface
- Direction
- sample uses typeface, so a change to typeface can break sample, while a change to sample can't break typeface.
- Position
- Below the diagonal: sample uses a module listed above it, which is the healthy direction.
40→39 sample uses sample.item✕
- Connections
- 1 pair of types, where a type in sample uses a type in sample.item.
- The types involved
com.mikepenz.iconics.sample.IconsFragment→com.mikepenz.iconics.sample.item.IconItem
- Direction
- sample uses sample.item, so a change to sample.item can break sample, while a change to sample can't break sample.item.
- Position
- Below the diagonal: sample uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 10 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 9 | High / Critical |
Roadmap
First, address the lack of architectural decision records by documenting significant design choices in a centralized folder. Next, resolve the 23 orphaned files in the codebase, prioritizing IconicsAnimationProcessor.kt, InternalIconicsUtils.kt, and FoundationIcons.kt. Then, integrate a static analysis security tool into the CI pipeline to prevent security regressions from being merged. Finally, improve allocation hygiene on hot paths by increasing the use of allocation-aware idioms to reduce runtime overhead.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Resolve the 1 No ADRs found finding(s) in ADR Quality. | +5.8 pts | Low | ADR Quality |
| Resolve the 1 Documentation finding(s) in Documentation Quality. | +2.9 pts | Low | Documentation Quality |
| Resolve the 5 Orphaned knowledge finding(s) in Knowledge Freshness — start with OutlinedMaterialSymbols.kt, icons.go, MaterialDesignDx.kt. | +2.9 pts | Low | Knowledge Freshness |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +5.8 pts | Medium | Architecture documentation |
| Resolve the 23 Orphaned file finding(s) in Knowledge Freshness — start with IconicsAnimationProcessor.kt, InternalIconicsUtils.kt, FoundationIcons.kt. | +4.3 pts | Medium | Knowledge Freshness |
| Add a SAST step to CI running what this repository's stack ships: spotbugs with find-sec-bugs — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing. | +4.0 pts | Medium | Security & performance tooling |
| Raise allocation-aware density on the hot paths — currently 12 use(s) across 38,680 production line(s) (~0.3/1k). More of the idioms below on the allocation-heavy paths climbs this toward 10. | +3.1 pts | Medium | Allocation hygiene |
| Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it. | +1.9 pts | Medium | Deployment & Rollback |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 2.3 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 5.1 | Mixed | Dependency Vulnerabilities: High CVE: REDACTED |
| iconics-core/src/main/java/com/mikepenz/iconics/IconicsDrawable.kt | 7.4 | Mixed | God Classes: TooManyMethods: IconicsDrawable |
| iconics-core/src/main/java/com/mikepenz/iconics/utils/IconicsMenuInflaterUtil.kt | 8.5 | Near-clean | Cognitive Complexity: IconicsMenuInflaterUtil.parseMenu (cognitive 21) |
| community-material-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/community/material/CommunityMaterial.kt | 8.5 | Near-clean | God Classes: FileTooLong: material/CommunityMaterial.kt |
| material-symbols-typeface/material-symbols-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/materialsymbols/OutlinedMaterialSymbols.kt | 8.5 | Near-clean | God Classes: FileTooLong: materialsymbols/OutlinedMaterialSymbols.kt |
| phosphor-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/phosphor/Phosphor.kt | 8.5 | Near-clean | God Classes: FileTooLong: phosphor/Phosphor.kt |
| simple-icons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/simpleicons/SimpleIcons.kt | 8.5 | Near-clean | God Classes: FileTooLong: simpleicons/SimpleIcons.kt |
| google-material-typeface/google-material-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/GoogleMaterial.kt | 8.5 | Near-clean | God Classes: FileTooLong: googlematerial/GoogleMaterial.kt |
| google-material-typeface/google-material-typeface-sharp-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/SharpGoogleMaterial.kt | 8.5 | Near-clean | God Classes: FileTooLong: googlematerial/SharpGoogleMaterial.kt |
| google-material-typeface/google-material-typeface-rounded-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/RoundedGoogleMaterial.kt | 8.5 | Near-clean | God Classes: FileTooLong: googlematerial/RoundedGoogleMaterial.kt |
| google-material-typeface/google-material-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/OutlinedGoogleMaterial.kt | 8.5 | Near-clean | God Classes: FileTooLong: googlematerial/OutlinedGoogleMaterial.kt |
| material-design-dx-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/materialdesigndx/MaterialDesignDx.kt | 8.5 | Near-clean | God Classes: FileTooLong: materialdesigndx/MaterialDesignDx.kt |
| fontawesome-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/fontawesome/FontAwesome.kt | 8.5 | Near-clean | God Classes: FileTooLong: fontawesome/FontAwesome.kt |
| material-design-iconic-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/materialdesigniconic/MaterialDesignIconic.kt | 8.5 | Near-clean | God Classes: FileTooLong: materialdesigniconic/MaterialDesignIconic.kt |
| ionicons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/ionicons/Ionicons.kt | 8.5 | Near-clean | God Classes: FileTooLong: ionicons/Ionicons.kt |
| weather-icons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/weathericons/WeatherIcons.kt | 8.5 | Near-clean | God Classes: FileTooLong: weathericons/WeatherIcons.kt |
| iconics-core/src/main/java/com/mikepenz/iconics/context/InternalLayoutInflater.kt | 8.5 | Near-clean | Cohesion (LCOM4): Low cohesion: InternalLayoutInflater (LCOM4 6) |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 56 of 60 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 4 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.9 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 60 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 61 of 78 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | Local LLM | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.kt) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.kt) and this repository declares a JVM test suite (repository root, Gradle), but it was not re-run: no test result was produced. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D14 License Compliance — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares a Gradle build (build.gradle/build.gradle.kts), but the licence verdict published here was taken over its gem dependencies. Nothing was read about its Gradle dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (48 contributor(s) across 1282 commit(s) sampled, automation and bot accounts excluded). One of them holds 86% of the history; the other 47 hold 0.3% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
- D32 Data Compliance (PII/GDPR) — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. `iconics-core/src/main/java/com/mikepenz/iconics/utils/IconicsExtensions.kt` produced a parse error, so every rule in this engine's `gdpr.yml` was absent there. That absence is NOT a clean result: these rules detect personal data crossing a boundary into a log sink, a URL or browser storage, and a file that was never parsed cannot report any of the three. The rest of the tree analysed normally and its rows above stand; only these files are unaccounted for. You can widen what we reach: fix the syntax error (or exclude the file deliberately) and re-scan to cover it.
- AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Boot via AndroidApp (app). the Android app did not build — `./gradlew :app:assembleDebug` exited 1: n any of the following sources: - Gradle Core Plugins (plugin is not in 'org.gradle' namespace) - Included Builds (No included builds contain this plugin) - Plugin Repositories (could not resolve plu…; runtime evidence skipped (launch chosen because app/build.gradle applies the Android application plugin and gradlew builds it).
- C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and this repository's Go, Java, Kotlin, groovy is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and this repository's Go, Kotlin, groovy is most of its product and is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- P1 CI/CD gates — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A CI pipeline exists and the word "test" appears, but no explicit test-runner invocation (your stack's test command, or a test job) was matched — so either the gate runs tests through a step this pass could not recognise, or "test" is incidental here (a path, "latest", a reporter). Which of the two it is cannot be settled from this dimension's evidence; the coverage dimensions report whether a suite exists at all. You can widen what we reach: name the test runner explicitly in the pipeline step (your stack's test command, or a job named for the suite) so the gate is unambiguous to a reader and to this pass.
- P5 DR & Backup — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. No backup/snapshot/replication config, RTO/RPO or restore-procedure documentation was found — and no production persistence was detected either (no data-access packages, no data-store services, no database resources), so there is nothing in this repository whose loss a DR control would recover. If this system's data lives in a platform or ops repo we can't see, that's where the DR evidence belongs.
- S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X2 Cancellation propagation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python and Rust source only, and no C# was loaded, and no named async function in this repository's JavaScript/TypeScript, nor any Go, PHP or Dart function or Kotlin suspend function, makes a request that can be cancelled (fetch, axios, ky, ofetch; net/http, net.Dial; amphp; Dio; Ktor, OkHttp), so there is nothing to judge, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D6 Cohesion (LCOM4): LCOM4 cohesion is syntactic — it infers connectivity from which methods touch which fields/methods by name, not from real runtime behaviour or intent.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
- D20 ADR Quality: ADR quality is an LLM read of the decision records present — it cannot know about decisions made and never recorded, and its verdict is sampled and advisory.
- D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
- D22 Internal API Consistency: API-surface coherence is an LLM judgement over a sample of the public surface — consistency of intent across the whole API is approximated, not exhaustively verified.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
The LLM boundary
Dimensions
D1 · Cyclomatic Complexity
0 method(s) exceeded the cyclomatic complexity threshold of 15.
D2 · Cognitive Complexity
1 method(s) exceeded the cognitive complexity threshold of 15; the worst was IconicsMenuInflaterUtil.parseMenu at 21.
What to do
- Bring the 1 body over 15 down to 15 or less in Cognitive Complexity — start with IconicsMenuInflaterUtil.parseMenu (cognitive 21). — Refactoring it lifts Cognitive Complexity from 9.6 to about 10.0/10.
- Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D3 · God Classes
15 god class(es) detected.
What to do
- Resolve the 13 FileTooLong finding(s) in God Classes — start with CommunityMaterial.kt, OutlinedMaterialSymbols.kt, Phosphor.kt. — One of this dimension's main actionable groups (13 warning-level).
- Resolve the 1 TooManyMethods finding(s) in God Classes — start with IconicsDrawable.kt. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 ClassTooLong finding(s) in God Classes — start with IconicsDrawable.kt. — One of this dimension's main actionable groups (1 warning-level).
- Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D4 · Code Duplication
1 duplicated block group(s) detected.
What to do
- Resolve the 1 Duplicated block (20 lines × 2) finding(s) in Code Duplication — start with IconicsDrawable.kt. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D5 · Coupling
26 production modules (Gradle), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; edges a convention plugin adds from buildSrc or build-logic are not visible there; 0 module(s) off the main sequence, with abstractness counted on 25 of the 26 (the rest declare no modelled class or interface, export only macros, declare types in source no model reads, or have no source directory of their own).
D6 · Cohesion (LCOM4)
1 of 18 classes have LCOM4 above 3.
What to do
- Resolve the 1 Low cohesion finding(s) in Cohesion (LCOM4) — start with InternalLayoutInflater.kt. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Cohesion (LCOM4) in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D12 · Dependency Hygiene
2 outdated direct gem(s), 0 pinning defect(s). 3 declaration(s) graded against rubygems.org, 3 of them against a version resolved in a committed REDACTED. Whether any of these gems is DEPRECATED or YANKED is not graded — rubygems.org publishes no deprecation marker, and a yank removes a version rather than flagging it. Whether any is UNMAINTAINED is not graded either: no registry publishes a maintenance status, and release age does not stand in for one. Whether any is UNUSED is a source question, not a registry one. Known CVEs in this dependency graph are D30's question, read from the manifest there.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 41 shipped gem(s) use a banned license. Licences were resolved from rubygems.org over the 41 gem(s) a consumer installs — this repository's runtime declarations closed transitively over its committed REDACTED. Development-group and `add_development_dependency` gems are excluded: they are not distributed with this repository. ★ COVERAGE OF THIS VERDICT: it grades this repository's gem dependencies and nothing else. The repository also declares a Gradle build (build.gradle/build.gradle.kts), and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D17 · Explicit Debt
0 deducted task-comment markers across 37212 LoC (0.0/KLoC) → score 10.0. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
D19 · Documentation Quality
The repository's root README is a well-structured, multi-part guide that states the project is in maintenance mode and recommends migrating to ImageVector with Material Symbols. It begins with an important maintenance banner, then a bulleted list of what Android-Iconics includes (no customization limits, shadow support, XML Drawable API 24, one icon source, flexibility across size/color/contour/shadow/auto mirroring, IconicsDrawable compatibility, and sav) before opening the document to links to migration, What's included, Setup, Latest releases, and a full outline. The body is clipped mid-outline but the visible content clearly states what it documents (the project itself, its purpose, and how to use what it contains).
What to do
- Resolve the 1 Documentation finding(s) in Documentation Quality. — One of this dimension's main actionable groups (1 recommendation-level).
D20 · ADR Quality
No architecture decision records were found.
What to do
- Resolve the 1 No ADRs found finding(s) in ADR Quality. — One of this dimension's main actionable groups (1 recommendation-level).
D21 · Naming Consistency
0 naming inconsistencies across 0 sampled symbols.
D22 · Internal API Consistency
0 API inconsistencies across a 400-member sample of 29027 exposed types.
D26 · Project Cohesion
1 of 26 build units (Gradle) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
10 finding(s): 0 critical, 10 high, 0 medium, 0 low. 7 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens. semgrep hit a parse error in 1 file(s) — `gradlew` (line 74, line 181) — so no absence of findings in the named regions is evidence of anything; rows reported elsewhere in those files are real. Fix the syntax error (or exclude the file deliberately) and re-scan to cover them. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- No action in Static Analysis (SAST) — all 7 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (7 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
3 finding(s): 0 critical, 3 high, 0 medium, 0 low.
What to do
- Resolve the 3 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (3). — One of this dimension's main actionable groups (3 issue-level).
D34 · Knowledge Freshness
28 of 58 significant source file(s) are orphaned — their living knowledge has decayed to nothing, so no one currently understands them. The largest is material-symbols-typeface/material-symbols-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/materialsymbols/OutlinedMaterialSymbols.kt. Counted over 58 of the 138 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 23 Orphaned file finding(s) in Knowledge Freshness — start with IconicsAnimationProcessor.kt, InternalIconicsUtils.kt, FoundationIcons.kt. — One of this dimension's main actionable groups (23 recommendation-level).
- Resolve the 5 Orphaned knowledge finding(s) in Knowledge Freshness — start with OutlinedMaterialSymbols.kt, icons.go, MaterialDesignDx.kt. — One of this dimension's main actionable groups (5 issue-level).
- Resolve the 1 Further orphaned files (smaller) finding(s) in Knowledge Freshness. — One of this dimension's main actionable groups (1 recommendation-level).
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 warning-level).
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 0 platform declaration(s) and 9 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
- `:iconics-core` is a Domain project but references `:iconics-typeface-api`, a Web project. The clean-architecture rule is that dependencies point INWARD — the domain/application core must not depend on outer layers (infrastructure/web). Invert it: define the abstraction in the inner layer and implement it in the outer one.
What to do
- Keep dependencies pointing inward: domain/application define interfaces, infrastructure/web implement them (Dependency Inversion).
M1 · Documentation (README)
What to do
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
- Add a README to the 25 of 25 project(s) that lack one — worth up to 2 pts.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
- No C4/Structurizr/PlantUML/Mermaid/Graphviz/D2 diagram, no drawn diagram named for the architecture, no file named `architecture` or `design` in any markup this check reads, and nothing in the README, docs or contributor guides that announces the shape — no `## Architecture` heading, no "architecture overview"/"high-level design" phrasing, no "the architecture is …" introduction, no guided code tour. A shape laid out in prose that never names itself as the architecture is not visible to this check, and neither is one kept outside the repository, so this row reports the absence of a re-findable shape document — not evidence that nobody wrote the shape down.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
- Add a C4 context/container diagram (Structurizr, PlantUML or Mermaid) or an architecture.md overview.
M3 · Folder & project structure
M4 · Documentation accuracy
P1 · CI/CD gates
What to do
- Run the test suite in CI via an explicit runner step (`./gradlew test` for the toolchain this pipeline already uses) and gate merges on it.
P10 · Library API & versioning
- 29027/29043 types (100%) declared in the published library are public. For a library, every public type is a stability contract — keep implementation types off the surface and expose only the intended API.
What to do
- Keep implementation types off the public surface (Java: package-private (no modifier), or leave its package out of `module-info` exports; Kotlin: `internal`) so internals can change without breaking consumers.
P2 · Observability
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add spotbugs with find-sec-bugs (or `semgrep --config=auto`, which runs on any language) as a CI step. What was searched, so you can tell an absence from a miss: the 4427 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
What to do
- Add a SAST step to CI running what this repository's stack ships: spotbugs with find-sec-bugs — or `semgrep --config=auto`, which runs on any language — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
- The release is automated and no gate that pauses it for a human is DECLARED IN THIS REPOSITORY'S PIPELINE FILES. What was read: every file under `.github/workflows/`, `.forgejo/workflows/`, `.gitea/workflows/`, `.azuredevops/` and `.azure-pipelines/`, plus `.gitlab-ci*` and `azure-pipelines*` — with comment text stripped, so documenting a gate is not declaring one. What would have counted: GitLab's `when: manual`, CircleCI's `type: approval`, an Azure `ManualValidation@` task or an `approvals:` block, a Jenkins `input` step, a `uses:` step naming an approval action, an `environment:` paired with `reviewers` / `required_reviewers` / `protection` / `wait-timer` / `deployment_branch_policy`, a draft-release step, a `workflow_dispatch` promotion, or a release-event gate. ★ What this cannot see, because none of it is a file: a GitHub environment whose required reviewers are configured in repo SETTINGS, a branch protection rule, or an organisation deployment policy — all of them real, enforced gates that live outside the repository. If yours is one of those, this row is wrong and nothing in the tree could have told us. Otherwise: whatever the release trigger points at is published to users unreviewed, so a mistagged or unverified commit ships and the only remedy is a follow-up release.
What to do
- Nothing pauses a release for a human: publish as a draft release (or gate the release job on a protected tag/manual dispatch) so a bad build can be stopped before users can download it.
P6 · Release Hygiene
PF2 · Allocation hygiene
What to do
- Raise allocation-aware density on the hot paths — currently 12 use(s) across 38,680 production line(s) (~0.3/1k). More of the idioms below on the allocation-heavy paths climbs this toward 10.
- Go: on hot paths, reuse buffers and objects through sync.Pool, preallocate slices and maps with make([]T, 0, n) / make(map[K]V, n), size builders with Grow, append with strconv.Append*, and reslice with buf[:0] instead of allocating anew.
- Java: on hot paths, work through buffer views (ByteBuffer/LongBuffer slices, MemorySegment) instead of copies, avoid boxing with primitive collections (fastutil, Eclipse Collections, HPPC, Trove), presize collections and StringBuilders, and pool expensive buffers (Netty's pooled allocator, commons-pool).
- Kotlin: on hot paths, use primitive arrays (IntArray, LongArray …) and @JvmInline value classes instead of boxed values, primitive collections (androidx.collection, fastutil) instead of boxed ones, and presize collections and StringBuilders.
X1 · Async correctness
X12 · Unreachable branch
X13 · Undrained process stream
X14 · Bypassable address classification
X15 · Unvalidated length from an untrusted reader
X16 · Unfloored truncation loop
X17 · Uncapped recursion over a caller-supplied document
X18 · Disposal-pattern correctness
X19 · Unrestored process-global state
X20 · Mistyped argument guard
X21 · Side-effecting pattern guard
X22 · Contradicted release guard
X23 · Unguarded diagnostic materialisation
X24 · Document value interpolated into markup unescaped
X25 · Inert configuration knob
X26 · Unsynchronised callback handoff
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
- `catch (ignored: Exception)` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. — iconics-core/src/main/java/com/mikepenz/iconics/typeface/GenericFont.kt:44
What to do
- Swallowed exception (caught, then discarded)
X30 · Support guard that admits what it rejects
X5 · Nullable reference types
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 85% | Strong | Strongest area. |
| Architecture | 84% | Strong | Solid. |
| Maturity | 51% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 53% | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 78% | Adequate — gated by D36 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Performance | 62% | Adequate | Acceptable, with room to improve. |
Not evidenced — 1 control(s) we could not find positive evidence for
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 59 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's Go imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's Java imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's; this repository's Kotlin imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — No container singleton was found, so there is no shared instance for concurrent requests to race on. No Go request handler (a net/http, Gin, Echo, Fiber or fasthttp handler, or a gRPC service method) is declared as a method or function, and no handler function literal writes a value captured from outside it, so no state is shared between request goroutines. No class in this Java code is a Spring, JSR-330 or CDI singleton bean. No class in this Kotlin code is a Spring, JSR-330 or CDI singleton bean. TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — no public interfaces
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — the Android app did not build — `./gradlew :app:assembleDebug` exited 1: n any of the following sources: - Gradle Core Plugins (plugin is not in 'org.gradle' namespace) - Included Builds (No included builds contain this plugin) - Plugin Repositories (could not resolve plu…; runtime evidence skipped (launch chosen because app/build.gradle applies the Android application plugin and gradlew builds it) This is a statement about this run, not a statement about your application: nothing here says the app is inaccessible, only that it was never run.
- C1 Data Protection — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no data at rest for these controls to protect.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C3 Audit Trail — No personal data detected in a persisted data model — no PII-named column (email, first_name, date_of_birth, phone_number, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no sensitive data whose changes an audit trail would record. If it does (through a store configured outside this repository, for instance), the trail belongs to wherever that data is stored.
- C4 Data Retention — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no personal data whose lifetime a retention limit would bound.
- C5 Data-Subject Rights — No personal data detected in a persisted data model — no PII-named field (email, firstName, dateOfBirth, phoneNumber, …) or stored credential on a Room, JPA or MongoDB entity, an Exposed or Ktorm table, or in a SQL CREATE TABLE or ALTER TABLE — and no database or data-store client (Room, Exposed, SQLDelight, Realm, JPA, JDBC, MongoDB, Firebase, …) imported either, so this repository keeps no personal data for a data subject to erase, export or consent over.
- D10 Test Quality — ~146 lines of test source are present (.kt) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — the .kt suite was found but not re-run
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — No inline comments to assess — comment value is not applicable here.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.kt), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — 1 file(s) were not parsed by semgrep — the PII/GDPR ruleset never ran over them
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- D9 Test Distribution — Test source is present (.kt) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- DM1 Domain Modelling — applicable but not scored (1 of 2 signals for this style — below the bar we score at): 1 value object(s)
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Go, JVM, JavaScript/TypeScript source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for `@Benchmark` in a Java, Kotlin or Scala file importing JMH or kotlinx-benchmark, Jetpack Benchmark's `measureRepeated` in a file importing androidx.benchmark, or JMH/kotlinx-benchmark/androidx.benchmark in a pom.xml, Gradle or sbt build, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF3 Async & latency hygiene — Not applicable: Go has no async/await function colour, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Kotlin was read, and it logs through none that an assembled message defeats: Android's `Log` and Timber, java.util.logging and log4j-api-kotlin take one finished message (as log4net does in C#), or it makes no call through a named logger at all. Calls made through SLF4J, log4j 2 or kotlin-logging (`LoggerFactory.getLogger`, `KotlinLogging.logger {}`) would be judged.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 19 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- Orphaned knowledge material-symbols-typeface/material-symbols-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/materialsymbols/OutlinedMaterialSymbols.kt:1
- Orphaned knowledge community-material-typeface-library/icons.go:1
- Orphaned knowledge material-design-dx-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/materialdesigndx/MaterialDesignDx.kt:1
- Orphaned knowledge ionicons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/ionicons/Ionicons.kt:1
- Orphaned knowledge iconics-views/src/main/java/com/mikepenz/iconics/internal/IconicsViewsAttrsApplier.kt:1
- REDACTED
- REDACTED
- REDACTED
- Dependency-rule violation: :iconics-core (Domain) → :iconics-typeface-api (Web)
- REDACTED
- REDACTED
- REDACTED
Serious — 22 finding(s)
- FileTooLong: material/CommunityMaterial.kt community-material-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/community/material/CommunityMaterial.kt
- FileTooLong: materialsymbols/OutlinedMaterialSymbols.kt material-symbols-typeface/material-symbols-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/materialsymbols/OutlinedMaterialSymbols.kt
- FileTooLong: phosphor/Phosphor.kt phosphor-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/phosphor/Phosphor.kt
- FileTooLong: simpleicons/SimpleIcons.kt simple-icons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/simpleicons/SimpleIcons.kt
- FileTooLong: googlematerial/GoogleMaterial.kt google-material-typeface/google-material-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/GoogleMaterial.kt
- FileTooLong: googlematerial/SharpGoogleMaterial.kt google-material-typeface/google-material-typeface-sharp-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/SharpGoogleMaterial.kt
- FileTooLong: googlematerial/RoundedGoogleMaterial.kt google-material-typeface/google-material-typeface-rounded-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/RoundedGoogleMaterial.kt
- FileTooLong: googlematerial/OutlinedGoogleMaterial.kt google-material-typeface/google-material-typeface-outlined-library/src/main/java/com/mikepenz/iconics/typeface/library/googlematerial/OutlinedGoogleMaterial.kt
- FileTooLong: materialdesigndx/MaterialDesignDx.kt material-design-dx-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/materialdesigndx/MaterialDesignDx.kt
- FileTooLong: fontawesome/FontAwesome.kt fontawesome-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/fontawesome/FontAwesome.kt
- FileTooLong: materialdesigniconic/MaterialDesignIconic.kt material-design-iconic-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/materialdesigniconic/MaterialDesignIconic.kt
- FileTooLong: ionicons/Ionicons.kt ionicons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/ionicons/Ionicons.kt
- FileTooLong: weathericons/WeatherIcons.kt weather-icons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/weathericons/WeatherIcons.kt
- IconicsMenuInflaterUtil.parseMenu (cognitive 21) iconics-core/src/main/java/com/mikepenz/iconics/utils/IconicsMenuInflaterUtil.kt:95
- TooManyMethods: IconicsDrawable iconics-core/src/main/java/com/mikepenz/iconics/IconicsDrawable.kt:57
- ClassTooLong: IconicsDrawable iconics-core/src/main/java/com/mikepenz/iconics/IconicsDrawable.kt:57
- REDACTED
- REDACTED
- REDACTED
- Duplicated block (20 lines × 2) iconics-core/src/main/java/com/mikepenz/iconics/IconicsDrawable.kt:584
- Low cohesion: InternalLayoutInflater (LCOM4 6) iconics-core/src/main/java/com/mikepenz/iconics/context/InternalLayoutInflater.kt:34
- Swallowed exception (caught, then discarded) iconics-core/src/main/java/com/mikepenz/iconics/typeface/GenericFont.kt:44
Minor — 35 finding(s)
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/animation/IconicsAnimationProcessor.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/utils/InternalIconicsUtils.kt:1
- Orphaned file foundation-icons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/foundationicons/FoundationIcons.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/Iconics.kt:1
- Orphaned file app/src/main/java/com/mikepenz/iconics/sample/IconsFragment.kt:1
- Orphaned file pixeden-7-stroke-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/pixeden7stroke/Pixeden7Stroke.kt:1
- Orphaned file devicon-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/devicon/DevIcon.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/context/InternalLayoutInflater.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/dsl/IconicsDrawableDsl.kt:1
- Orphaned file iconics-views/src/main/java/com/mikepenz/iconics/view/IconicsCheckableTextView.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/utils/IconicsExtensions.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/animation/IconicsAnimatedDrawable.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/typeface/GenericFont.kt:1
- Orphaned file meteocons-typeface-library/src/main/java/com/mikepenz/iconics/typeface/library/meteoconcs/Meteoconcs.kt:1
- Orphaned file iconics-views/src/main/java/com/mikepenz/iconics/view/IconicsButton.kt:1
- Orphaned file iconics-views/src/main/java/com/mikepenz/iconics/view/IconicsTextView.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/context/IconicsFactory.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/animation/IconicsAnimationListener.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/context/ReflectionUtils.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/animation/SpinProcessor.kt:1
- Orphaned file iconics-views/src/main/java/com/mikepenz/iconics/view/IconicsCompoundButton.kt:1
- Orphaned file app/src/main/java/com/mikepenz/iconics/sample/item/IconItem.kt:1
- Orphaned file iconics-core/src/main/java/com/mikepenz/iconics/animation/BlinkScaleProcessor.kt:1
- Documentation: no architecture or design documentation
- No ADRs found
- Projects may be oversized for their cohesion
- Further orphaned files (smaller)
- REDACTED
- REDACTED
- REDACTED
- No ADRs
- No architecture diagram/doc
- Large public API surface
- No SAST
- No release approval gate
Minor — 2 finding(s)
- Outdated: danger
- Outdated: danger-android_lint
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4a50f04e989241cc84483091709df39f/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-4a50f04e989241cc84483091709df39f/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off . | 10 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 3 | artifacts/raw/osv-scanner.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. semgrep could not parse 1 file(s) — `iconics-core/src/main/java/com/mikepenz/iconics/utils/IconicsExtensions.kt` — so the PII/GDPR sweep did not cover the unparsed regions of them; rows reported elsewhere in those files are real. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 0 | artifacts/raw/osv-scanner.json |