Executive summary
open-telemetry/opentelemetry-erlang-contrib scores 70 out of 100 and is rated Adequate, while three of its five lenses score higher still: Architecture at 97, rated Exemplary, and Security and Compliance at 82 and Production Readiness at 76, both rated Adequate.
The score is lower than those three because the weakest lens counts most, and here that is Maturity, which scores 65 and is rated Adequate. Its Architecture documentation dimension scores 2 out of 10, and until that reaches 4, Maturity can't be rated higher than Adequate. The first actions are to record your significant design decisions and to swallowed exception (caught, then discarded), and if Maturity rose to 70, the score would rise from 70 to about 72.
14 findings are critical: ten in REDACTED Scanning, three in Dependency Vulnerabilities and one in Secrets (history).
Watchdog couldn't measure 32 dimensions in this code, among them Cohesion (LCOM4), Code Coverage and Test Reliability, so they are left out of the score. The product code is 12,729 lines, which would take an estimated 0.2 person-years, around €33,000, to rebuild.
If Maturity rose from 65 to 70, the lowest score rated Strong, the score would rise from 70 to about 72.
New since the last survey: 4 findings
- REDACTED Scanning · REDACTED
- Supply-chain Provenance & Signing · REDACTED
- Exception handling · Swallowed exception (caught, then discarded) instrumentation/opentelemetry_elli/src/otel_elli.erl
- Exception handling · Swallowed exception (caught, then discarded) instrumentation/opentelemetry_elli/src/otel_elli.erl
Fixed since the last survey: 2 findings
- Dependency Vulnerabilities · Medium CVE: EEF-[CVE redacted] instrumentation/opentelemetry_bandit/mix.lock
- Supply-chain Provenance & Signing REDACTED
Rebuild cost: about €33,000 · Estimate
| Cost to rebuild | €11,000 to €55,000, for 183 to 582 hours of work, about 0.2 person-years for one engineer |
|---|---|
| Difficulty of the problem | Standard, judged from the kind of software and how it is built. Code that solves a harder problem, such as payments or medical bookings, costs more per line to write. |
| Quality factor | ×1.0 at a score of 70. Better code takes more work to write, so the factor is ×1.0 at a score of 70, lower below it and higher above it. |
| Size | Small: 12,729 lines of product code |
Top priorities
Diagnosis: what the measurements show together
Architecture — module dependency graph
Architecture: which parts of the code depend on which
| uses → | 1 (global) | 2 BasicElixir | 3 Demo | 4 Demo.Accounts | 5 Demo.Blog | 6 OpentelemetryAbsinthe | 7 OpentelemetryBroadway | 8 OpentelemetryCommanded | 9 OpentelemetryEcto | 10 OpentelemetryGrpc | 11 OpentelemetryHTTPoison | 12 OpentelemetryNebulex | 13 OpentelemetryOban | 14 OpentelemetryProcessPropagator | 15 OpentelemetryProcessPropagator.Task | 16 OpentelemetryRedix | 17 RollDice | 18 Tesla.Middleware | 19 examples.basic_phoenix_ecto.assets.js | 20 DemoWeb | 21 DemoWeb.UserLive | 22 RollDiceWeb |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 (global) | ||||||||||||||||||||||
| 2 BasicElixir | ||||||||||||||||||||||
| 3 Demo | ||||||||||||||||||||||
| 4 Demo.Accounts | ||||||||||||||||||||||
| 5 Demo.Blog | ||||||||||||||||||||||
| 6 OpentelemetryAbsinthe | ||||||||||||||||||||||
| 7 OpentelemetryBroadway | ||||||||||||||||||||||
| 8 OpentelemetryCommanded | ||||||||||||||||||||||
| 9 OpentelemetryEcto | ||||||||||||||||||||||
| 10 OpentelemetryGrpc | ||||||||||||||||||||||
| 11 OpentelemetryHTTPoison | ||||||||||||||||||||||
| 12 OpentelemetryNebulex | ||||||||||||||||||||||
| 13 OpentelemetryOban | ||||||||||||||||||||||
| 14 OpentelemetryProcessPropagator | ||||||||||||||||||||||
| 15 OpentelemetryProcessPropagator.Task | ||||||||||||||||||||||
| 16 OpentelemetryRedix | ||||||||||||||||||||||
| 17 RollDice | ||||||||||||||||||||||
| 18 Tesla.Middleware | ||||||||||||||||||||||
| 19 examples.basic_phoenix_ecto.assets.js | ||||||||||||||||||||||
| 20 DemoWeb | 7 | |||||||||||||||||||||
| 21 DemoWeb.UserLive | 3 | |||||||||||||||||||||
| 22 RollDiceWeb | 2 |
20→1 DemoWeb uses (global)✕
- Connections
- 7 pairs of types, where a type in DemoWeb uses a type in (global).
- The types involved
DemoWeb.ErrorView→DemoWebDemoWeb.LayoutView→DemoWebDemoWeb.PageController→DemoWebDemoWeb.PageView→DemoWebDemoWeb.PostController→DemoWebDemoWeb.PostView→DemoWebDemoWeb.Router→DemoWeb
- Direction
- DemoWeb uses (global), so a change to (global) can break DemoWeb, while a change to DemoWeb can't break (global).
- Position
- Below the diagonal: DemoWeb uses a module listed above it, which is the healthy direction.
21→1 DemoWeb.UserLive uses (global)✕
- Connections
- 3 pairs of types, where a type in DemoWeb.UserLive uses a type in (global).
- The types involved
DemoWeb.UserLive.FormComponent→DemoWebDemoWeb.UserLive.Index→DemoWebDemoWeb.UserLive.Show→DemoWeb
- Direction
- DemoWeb.UserLive uses (global), so a change to (global) can break DemoWeb.UserLive, while a change to DemoWeb.UserLive can't break (global).
- Position
- Below the diagonal: DemoWeb.UserLive uses a module listed above it, which is the healthy direction.
22→1 RollDiceWeb uses (global)✕
- Connections
- 2 pairs of types, where a type in RollDiceWeb uses a type in (global).
- The types involved
RollDiceWeb.DiceController→RollDiceWebRollDiceWeb.Router→RollDiceWeb
- Direction
- RollDiceWeb uses (global), so a change to (global) can break RollDiceWeb, while a change to RollDiceWeb can't break (global).
- Position
- Below the diagonal: RollDiceWeb uses a module listed above it, which is the healthy direction.
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A07:2025 — Authentication Failures | 12 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 9 | High / Critical |
Roadmap
Begin by documenting significant design decisions in the docs/adr folder to establish a clear architectural record. Next, address critical security and stability risks by resolving ten leaked secrets in configuration files and fixing two swallowed exceptions. Finally, mitigate bus factor risks by distributing sole ownership of critical components and preparing for off-boarding scenarios.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +4.7 pts | Medium | Architecture documentation |
| Swallowed exception (caught, then discarded) | +4.5 pts | Medium | Exception handling |
| Resolve the 1 Further sole-owners (lower concentration) finding(s) in Bus Factor. | +1.7 pts | Low | Bus Factor |
| Resolve the 1 Off-boarding risk finding(s) in Bus Factor. | +1.7 pts | Low | Bus Factor |
| Resolve the 3 Unbounded dependency requirement finding(s) in Dependency Hygiene. | +1.1 pts | Low | Dependency Hygiene |
| Resolve the 10 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED (5), REDACTED (4), REDACTED. | +2.1 pts | Medium | REDACTED Scanning |
| Reconcile the README with reality: docs/reference/hooks.md documents the setting `phase`, but no code or configuration file names `phase`. | +1.4 pts | Medium | Documentation accuracy |
| Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite. | +0.9 pts | Medium | Documentation (README) |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 5.8 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 5.8 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 5.8 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 5.8 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 5.8 | Mixed | Dependency Vulnerabilities: High CVE: REDACTED |
| instrumentation/opentelemetry_phoenix/lib/opentelemetry_phoenix.ex | 6.7 | Mixed | Explicit Debt: TodoComment |
| REDACTED | 7.2 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 7.2 | Mixed | REDACTED Scanning: Leaked secret: REDACTED |
| REDACTED | 7.2 | Mixed | Secrets (history): REDACTED: REDACTED |
| REDACTED | 7.2 | Mixed | Dependency Vulnerabilities: High CVE: REDACTED |
| instrumentation/opentelemetry_commanded/lib/commanded/process_manager.ex | 7.3 | Mixed | Explicit Debt: TodoComment |
| instrumentation/opentelemetry_commanded/lib/commanded/event_handler.ex | 7.3 | Mixed | Explicit Debt: TodoComment |
| instrumentation/opentelemetry_elli/src/otel_elli_middleware.erl | 7.3 | Mixed | Explicit Debt: TodoComment |
| instrumentation/opentelemetry_commanded/lib/commanded/aggregate.ex | 7.8 | Mixed | Code Duplication: Duplicated block (22 lines × 2) |
| REDACTED | 7.9 | Mixed | Dependency Vulnerabilities: Medium CVE: REDACTED |
| REDACTED | 7.9 | Mixed | Dependency Vulnerabilities: Medium CVE: REDACTED |
| REDACTED | 7.9 | Mixed | Supply-chain Provenance & Signing: REDACTED |
| instrumentation/opentelemetry_commanded/test/commanded/application_test.exs | 8.2 | Near-clean | Explicit Debt: TodoComment |
| instrumentation/opentelemetry_commanded/test/commanded/aggregate_test.exs | 8.2 | Near-clean | Explicit Debt: TodoComment |
| instrumentation/opentelemetry_oban/lib/opentelemetry_oban/plugin_handler.ex | 8.2 | Near-clean | Explicit Debt: TodoComment |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 35 of 38 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 3 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.8 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 38 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 41 of 56 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy · checkov | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 · 3.2.533 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | Local LLM | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D6 Cohesion (LCOM4) — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 2 process module(s) keep their state in something other than a record or struct (a map or a tuple), which this pass does not read as fields, and no other module held state it could measure.
- D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.exs, .ex) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (lcov — `mix test --cover` with `excoveralls` (`mix coveralls.lcov`)) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (lcov — `mix test --cover` with `excoveralls` (`mix coveralls.lcov`)) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.exs, .ex) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is a COLLECTOR gap, not an environment fault: it declares a published package (instrumentation/opentelemetry_absinthe/mix.exs), but no published-package marker D22 reads admitted any project here, so this ecosystem's public API has no collector, and the remedy is to write one — no change to the scan image can close it.
- D27 Navigability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Navigability is taken over call sites whose callee resolved. For C# that population includes calls into referenced assemblies; for this language only calls declared inside the repository count, so the abstention threshold reads the repository's use of its standard library as a resolution failure. That is a limit of this analyzer, not a build problem in this repository.
- D34 Knowledge Freshness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. File-level freshness contradicts repo activity: 107 commits in the last 90 days, yet 24 of 47 significant files carry no living knowledge. Those two readings cannot both be true, so the per-file recency signal is treated as unreliable here and freshness is not scored for this run.
- D44 Platform End-of-Life — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This dimension reads a project's own statement about the platform it runs on: a TargetFramework in a .NET project file, a .nvmrc or .python-version, a capped requires-python, a Rust toolchain file or Cargo.toml rust-version, a .go-version, .java-version, .ruby-version, .tool-versions or .sdkmanrc, a go.mod go directive, a Maven or Gradle Java level or toolchain, a Gemfile's ruby directive, a mix.exs elixir requirement, a rebar.config minimum_otp_vsn, a pubspec.yaml SDK constraint, a build.sbt scalaVersion, or a framework major pinned by a dependency constraint. This repository carries none of them, so nothing about its platform was established. That is a gap in this analyzer's coverage, NOT a finding that the platform is supported — a language whose runtime is declared elsewhere (Package.swift, a Dockerfile) is simply not read here yet.
- AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AXR1 Runtime accessibility — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Render strategy: boot via DockerCompose (examples/basic_elixir/docker-compose.yml). compose up failed (exit 18 — an image could not be pulled) — jaeger-all-in-one Pulling zipkin Pulling otel Pulling otel Error Get "https://registry-1.docker.io/v2/": Forbidden jaeger-all-in-one Error context canceled zipkin Error context canceled Error response from daemon: Get "https://registry-1.docker.io/v2/": Forbidden; the earlier `compose pull` step reported: elixir Skipped - No image to be pulled jaeger-all-in-one Pulling otel Pulling zipkin Pulling zipkin Error Get "https://registry-1.docker.io/v2/": Forbidden jaeger-all-in-one Error Get "https://registry-1.docker.io/v2/": Forbidden otel Error Get "https://registry-1.docker.io/v2/": Forbidden Error response from daemon: Get "https://registry-1.docker.io/v2/": Forbidden; the runtime sandbox reaches registries only through the in-fence pull-through mirror, so an image the mirror does not carry cannot be fetched — this is a limit of our sandbox, not of your stack; runtime evidence skipped.
- C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These personal data controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks personal data controls.
- C2 Access Controls — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These authorization controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks authorization controls.
- C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These audit controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks audit controls.
- C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These retention controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks retention controls.
- C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These data-subject rights controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks data-subject rights controls.
- GD1 Unfinished & placeholder code — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, F#, JavaScript/TypeScript, Dart, Ruby and Scala source only, and no C#, F#, JavaScript/TypeScript, Dart, Ruby or Scala was found, and this repository's Elixir, Erlang is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- IC1 Incompleteness & stubs — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, JavaScript/TypeScript, Java, Dart, Ruby and Scala source only, and no C#, JavaScript/TypeScript, Java, Dart, Ruby or Scala was found, and this repository's Elixir, Erlang is not read yet, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- S1 Web-Security Posture — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. These web-security controls are read from declarative annotations, request middleware, entity/column names and guard methods in a C# source model, and none was loaded on this run, so there was nothing to gather. That is a gap in this analyzer's language reach — not a finding that the repository lacks web-security controls.
- X1 Async correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala, Rust and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala, Rust or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X12 Unreachable branch — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X13 Undrained process stream — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X14 Bypassable address classification — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, Rust, Swift, Ruby, Dart, PHP, Python and Go source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, Rust, Swift, Ruby, Dart, PHP, Python or Go was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X15 Unvalidated length from an untrusted reader — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Ruby, Python, Go, Rust and Dart source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Scala, PHP, Ruby, Python, Go, Rust or Dart was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X16 Unfloored truncation loop — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, PHP, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X17 Uncapped recursion over a caller-supplied document — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Python, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Python, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X18 Disposal-pattern correctness — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X19 Unrestored process-global state — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, Dart, Ruby, Scala or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X2 Cancellation propagation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python and Rust source only, and no C# was loaded and no JavaScript/TypeScript, Go, PHP, Dart, Kotlin, Ruby, Scala, Java, Python or Rust was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X23 Unguarded diagnostic materialisation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin and PHP source only, and no C# was loaded and no JavaScript/TypeScript, Java, F#, Python, Dart, Ruby, Scala, Kotlin or PHP was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X24 Document value interpolated into markup unescaped — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Scala, Ruby and Python source only, and no C# was loaded and no JavaScript/TypeScript, Java, Scala, Ruby or Python was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X29 Per-element action decided by a fixed element — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Rust, Dart, Ruby, Scala and Kotlin source only, and no C# was loaded and no JavaScript/TypeScript, Java, Rust, Dart, Ruby, Scala or Kotlin was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X30 Support guard that admits what it rejects — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and Scala, JavaScript/TypeScript, Java, Kotlin, Python, PHP, Go, Rust, Dart and Ruby source only, and no C# was loaded and no Scala, JavaScript, TypeScript, Java, Kotlin, Python, PHP, Go, Rust, Dart or Ruby was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X4 Structured logging — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C# syntax, and JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala and Rust source only, and no C# was loaded and no JavaScript/TypeScript, Java, Kotlin, Python, PHP, Dart, Ruby, Scala or Rust was found in this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- X7 Silent fallback defaults — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. X7 measured the part of this repository it reads (C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift and Dart), and its Elixir, Erlang source is outside the check's reach, so the card covers only part of the product. That is a gap in this analyzer's language reach — not a finding that the unread source is free of silent defaults.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D1 Cyclomatic Complexity: Cyclomatic complexity counts branches statically — it cannot tell an essential decision tree from accidental tangle, nor see complexity that lives in data or configuration (large switch-case token tables, DSL lexers/parsers, data-as-code rule tables) rather than control flow: a tokenizer's many single-character cases read as high complexity though each branch is trivial.
- D2 Cognitive Complexity: Cognitive-complexity heuristics approximate how hard code is to follow; genuine domain difficulty and well-named intent that eases reading are not captured.
- D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
- D4 Code Duplication: Duplication is token-similarity — an in-process token-stream comparison over sliding windows, with type-aware normalization — so it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
- D5 Coupling: Coupling is measured between projects/assemblies — runtime coupling through DI, reflection, messaging or shared databases is invisible to a static reference graph.
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 REDACTED Scanning: REDACTED detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D15 Churn × Complexity Hotspots: Churn hotspots come from git history — a freshly imported or squashed repository has no churn signal, and recent rewrites can mask a historically risky file.
- D16 Bus Factor: Bus-factor is a time-decayed model of commit attribution (who has recently, repeatedly worked a file), not comprehension — pairing, review and reading-without-committing spread knowledge it can't see; bot commits and shared accounts still distort it.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement. Its critique rows are drawn from a closed category vocabulary and each row means the same thing in every run, so two scans can be compared row by row; the SET that fires is still a sample, and does not repeat exactly. Measured on one frozen input, six scans at one engine SHA: 2-5 critique rows per scan, 8 distinct rows across the six, 3 of those 8 seen in only one scan. So a D19 row is evidence about the documentation, but a COUNT of D19 rows is not a quantity — never read a change in it as an improvement or a regression.
- D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
- D26 Project Cohesion: Project focus is sized from members/namespaces per project — a project that is broad by deliberate design reads the same as one that has sprawled.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D31 IaC & Container Security: IaC scanning checks Dockerfiles/Terraform/Kubernetes against best-practice rules — it cannot see the live cloud account, runtime configuration, or drift between the committed config and what is actually deployed.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
- P4 Deployment & Rollback: Approval/branch-protection rules live in repository settings the scan cannot see — only their in-repo evidence (config files, workflows) is checked, so a control enforced purely in the host's settings reads as "not evidenced".
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
The LLM boundary
Dimensions
D1 · Cyclomatic Complexity
0 function(s) exceeded the cyclomatic complexity threshold of 15.
D2 · Cognitive Complexity
1 function(s) exceeded the cognitive complexity threshold of 15; the worst was otel_http.extract_ip_port at 19.
What to do
- Bring the 1 body over 15 down to 15 or less in Cognitive Complexity — start with otel_http.extract_ip_port (cognitive 19). — Refactoring it lifts Cognitive Complexity from 9.7 to about 10.0/10.
- Enforce Cognitive Complexity in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D3 · God Classes
1 over-large unit(s) detected — types, modules or files that carry too much.
What to do
- Resolve the 1 FileTooLong finding(s) in God Classes — start with supervisor.ex. — One of this dimension's main actionable groups (1 warning-level).
- Enforce God Classes in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D4 · Code Duplication
7 duplicated block group(s) detected.
What to do
- Resolve the 1 Duplicated block (22 lines × 2) finding(s) in Code Duplication — start with aggregate.ex. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (19 lines × 2) finding(s) in Code Duplication — start with opentelemetry_ecto.ex. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 Duplicated block (10 lines × 2) finding(s) in Code Duplication — start with opentelemetry_bandit.ex. — One of this dimension's main actionable groups (1 warning-level).
- Enforce Code Duplication in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D5 · Coupling
24 production modules (OTP), 0 dependency cycle(s), 0 unstable depended-on module(s). Read from the build's own module declarations; 0 module(s) off the main sequence.
D12 · Dependency Hygiene
4 outdated, 0 retired direct Hex dependencies, 3 pinning defect(s). Whether any of these packages is UNMAINTAINED is not graded — hex.pm publishes no maintenance status, and release age does not stand in for one. Whether any is UNUSED is not graded either: a Hex app name does not determine the modules it provides (`ecto_sql` provides Ecto.Adapters.SQL), and a large idiomatic class of BEAM dependencies — runtime adapters, codec plugins, protocol implementations and OTP applications the release starts — is correctly declared and never referenced in source, so absence of a reference is not evidence of an unused dependency. Known CVEs in this dependency graph are D30's question, read from REDACTED there.
What to do
- Resolve the 3 Unbounded dependency requirement finding(s) in Dependency Hygiene. — One of this dimension's main actionable groups (3 warning-level).
- Enforce Dependency Hygiene in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Verified — provenance only; does not change the score.
D13 · REDACTED Scanning
10 secret(s) detected.
What to do
- Resolve the 10 Leaked secret finding(s) in REDACTED Scanning — start with REDACTED (5), REDACTED (4), REDACTED. — One of this dimension's main actionable groups (10 issue-level).
- Enforce REDACTED Scanning in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D14 · License Compliance
0 of 70 shipped Hex package(s) use a banned license. Licences were resolved from hex.pm over the packages a consumer installs — this repository's REDACTED closed over the declarations its mix.exs files do not gate behind `only:`. Packages it asks for ONLY under `only: [:dev, :test]` (or any other non-prod environment, such as `:docs`) are excluded: they are not installed by anything that depends on this repository. Each licence is the one hex.pm publishes for the package's current release. A further 1 package(s) the closure reaches resolve from git, a path or a local override and publish no licence this pass can read; they are outside this verdict. This repository publishes itself under Apache-2.0 / Apache-2, which is its own choice and is not judged here.
D15 · Churn × Complexity Hotspots
No churn × complexity hotspots in the window.
D16 · Bus Factor
9 source file(s) have their living knowledge concentrated in one author (≥90% of recent, decayed contribution). The largest is instrumentation/opentelemetry_httpoison/lib/opentelemetry_httpoison.ex. Counted over 47 of the 118 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
What to do
- Resolve the 1 Off-boarding risk finding(s) in Bus Factor. — One of this dimension's main actionable groups (1 recommendation-level).
- Resolve the 1 Further sole-owners (lower concentration) finding(s) in Bus Factor. — One of this dimension's main actionable groups (1 recommendation-level).
D17 · Explicit Debt
12 deducted task-comment markers across 12729 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What to do
- Resolve the 12 TodoComment finding(s) in Explicit Debt — start with process_manager.ex (2), event_handler.ex (2), otel_elli_middleware.erl (2). — One of this dimension's main actionable groups (12 warning-level).
- Enforce Explicit Debt in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D19 · Documentation Quality
The repository's root README is excellent at directing readers to the docs/ directory (the instrumentation/README.md examples are also well written), with a clear overview of what this project does and where to find it. The docs/README.md documents that directory, not the repository, so its own quality depends on internal documentation rather than the root's scope; the README files themselves cover installation, usage, contribution, and license guidance for their respective directories. Every instrumentation/opentelemetry-<sub>directory</sub>/README is a directory README documenting that directory rather than the repository root; they are all well written and complete for their scope. The OpentelemetryFinch, OpentelemetryGrpc, OpentelemetryHttpoison, OpentelemetryNebulex, OpentelemetryOban, OpentelemetryRedix, OpentelemetryReq, OpentelemetrySqlcommenter, and OpentelemetryTesla packages are each individually well documented with installation, usage examples, a compatibility matrix, and cross-references to the HexDocs docs site. The READMEs all open with an overview of what the package does (e.g., 'OpentelemetryFinch uses telemetry handlers to create OpenTelemetry spans from Finch events') rather than jargon or ticket ids; none are internal-focused despite being documentation for a library, and there is no missing-overview, missing-installation, or missing-usage defect in any of them.
D21 · Naming Consistency
0 naming inconsistencies across 0 sampled symbols.
D26 · Project Cohesion
0 of 24 build units (Mix, rebar3) flagged as possibly oversized/incoherent.
D28 · Secrets (history)
1 finding(s): 0 critical, 1 high, 0 medium, 0 low. Remediation for historically-committed secrets is credential rotation — they remain in history regardless of later deletion.
What to do
- Resolve the 1 REDACTED finding(s) in Secrets (history) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 1 Rotate the exposed credentials finding(s) in Secrets (history). — One of this dimension's main actionable groups (1 recommendation-level).
D29 · Static Analysis (SAST)
semgrep found no security issues. Separately, one or more rules could not re-parse an embedded snippet in 1 file(s) (e.g. a workflow `run:` block read as shell). Those files WERE scanned and their other rows are unaffected; only those rules' view of those snippets is missing.
D30 · Dependency Vulnerabilities
5 finding(s): 0 critical, 3 high, 2 medium, 0 low.
What to do
- Resolve the 3 High CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (2), REDACTED. — One of this dimension's main actionable groups (3 issue-level).
- Resolve the 2 Medium CVE finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
D31 · IaC & Container Security
trivy and checkov found no infrastructure-as-code or container misconfigurations.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D36 · Supply-chain Provenance & Signing
1/4 supply-chain integrity signals present (provenance, signing, SBOM, pinned actions).
What to do
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
- Resolve the 1 REDACTED finding(s) in Supply-chain Provenance & Signing. — One of this dimension's main actionable groups (1 recommendation-level).
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
M1 · Documentation (README)
What to do
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure
M4 · Documentation accuracy
- docs/reference/hooks.md documents the setting `phase`, but no code or configuration file names `phase`. Checked without a model against the repository: its files and folders, the scripts and dependencies of every package.json, the projects, namespaces, package references and target frameworks of the .NET build, the SDK and Node pins, and the identifiers of every file that is not a document; the documents' own text never counts. A footprint generated at build time, read only by a platform, or living outside this repository is not seen, and this row is then wrong. — docs/reference/hooks.md:51
What to do
- Reconcile the README with reality: docs/reference/hooks.md documents the setting `phase`, but no code or configuration file names `phase`.
P1 · CI/CD gates
P10 · Library API & versioning
P2 · Observability
- Only 5/6 runnable modules use logging (modules with no entry point or server are excluded — they are libraries a runnable module hosts). Silent: `instrumentation/opentelemetry_phoenix`.
What to do
- Extend structured logging to the remaining runnable modules so everything you run is diagnosable in production.
- Add a health-check endpoint (a /health route in your Phoenix router or Plug) so orchestrators and load balancers can probe liveness/readiness.
P3 · Security & performance tooling
What to do
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P4 · Deployment & Rollback
P6 · Release Hygiene
X25 · Inert configuration knob
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
X3 · Exception handling
- `catch _:_` takes every exception and records none of it — the body neither logs it, rethrows it, nor even names it, so the failure is discarded as completely as by an empty catch and only the substituted value survives. Log it through whatever this codebase already uses to report problems, narrow the catch to the exception this call can actually raise, or say in a comment on the catch why the failure genuinely cannot matter. (×2) — instrumentation/opentelemetry_elli/src/otel_elli.erl:36, instrumentation/opentelemetry_elli/src/otel_elli.erl:44
What to do
- Swallowed exception (caught, then discarded)
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 67% | Adequate — gated by X3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Architecture | 97% | Exemplary | Strongest area. |
| Maturity | 65% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 76% | Adequate — gated by D13 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 82% | Adequate — gated by D36 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
Not evidenced — 4 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 80 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: the BEAM has no dependency-injection container — state lives in processes, and no process is handed an instance whose lifetime another one scopes; this repository's JavaScript imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — Not applicable: Elixir processes share no mutable memory — state lives in a process's own mailbox — so there is no shared object to race on. Erlang processes share no mutable memory — state lives in a process's own mailbox — so there is no shared object to race on. TypeScript/JavaScript runs each process's requests on one event loop, so no two requests write a shared object at the same instant (interleaving across an await is a different defect).
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- AXR1 Runtime accessibility — compose up failed (exit 18 — an image could not be pulled) — jaeger-all-in-one Pulling zipkin Pulling otel Pulling otel Error Get "https://registry-1.docker.io/v2/": Forbidden jaeger-all-in-one Error context canceled zipkin Error context canceled Error response from daemon: Get "https://registry-1.docker.io/v2/": Forbidden; the earlier `compose pull` step reported: elixir Skipped - No image to be pulled jaeger-all-in-one Pulling otel Pulling zipkin Pulling zipkin Error Get "https://registry-1.docker.io/v2/": Forbidden jaeger-all-in-one Error Get "https://registry-1.docker.io/v2/": Forbidden otel Error Get "https://registry-1.docker.io/v2/": Forbidden Error response from daemon: Get "https://registry-1.docker.io/v2/": Forbidden; the runtime sandbox reaches registries only through the in-fence pull-through mirror, so an image the mirror does not carry cannot be fetched — this is a limit of our sandbox, not of your stack; runtime evidence skipped This is a statement about this run, not a statement about your application: nothing here says the surface is inaccessible, only that it was never rendered.
- C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- D10 Test Quality — ~12573 lines of test source are present (.exs, .ex) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — no .exs test runner
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout nor 2+ sibling source directories each declaring an aggregate root. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — No inline comments to assess — comment value is not applicable here.
- D25 ADR Conformance — no ADRs to check
- D27 Navigability — D27 counts a call into the standard library or a dependency as unresolved for this repository's language (.ex), so too few call sites counted as resolved to assess navigability. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D34 Knowledge Freshness — knowledge concentrated in recent work — freshness signal contradicted by repo activity
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D44 Platform End-of-Life — Platform end-of-life not assessed — this repository declares no platform this pass reads
- D6 Cohesion (LCOM4) — cohesion (LCOM4) not measured — process state held outside a record or struct
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- D9 Test Distribution — Test source is present (.exs, .ex) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
- ES1 Event Sourcing — not scored — this repository shows only 1 of the 3 signals this lens looks for (an Elixir event-sourcing framework marker (use Commanded.Aggregate / EventStore))
- GD1 Unfinished & placeholder code — no source files were read — this check reads C#, F#, JavaScript/TypeScript, Dart, Ruby and Scala, and none was read for this repository's product. That is a limit of the analyzer, not a finding about your code.
- IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Elixir, Erlang source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (lcov — `mix test --cover` with `excoveralls` (`mix coveralls.lcov`)) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF1 Benchmark discipline — Not applicable: no benchmark suite was found. This check searched for Benchee jobs (the entries of a `Benchee.run` job map) or Benchfella `bench "…"` blocks under `use Benchfella` in any `.ex`/`.exs` file, or benchee or benchfella in a mix.exs, and for a `*benchmark*` script that this repository's CI runs. Benchmarks are credited as a bonus, so their absence is neither scored nor deducted.
- PF2 Allocation hygiene — Not applicable: Elixir and Erlang runs on a garbage-collected runtime that gives a program no allocation-control idiom to choose on a hot path — no pools, stack allocation or value types — so allocation awareness is not something this code can be rated on.
- PF3 Async & latency hygiene — Not applicable: Elixir and Erlang has no async/await function colour, so there is no asynchronous code for a blocking call to stall.
- S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
- SC1 Supply-chain hygiene — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X12 Unreachable branch — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X13 Undrained process stream — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X14 Bypassable address classification — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X15 Unvalidated length from an untrusted reader — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X16 Unfloored truncation loop — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X17 Uncapped recursion over a caller-supplied document — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X18 Disposal-pattern correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X19 Unrestored process-global state — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X21 Side-effecting pattern guard — Not applicable: this check looks for a pattern guard or `case` label that increments, decrements or assigns while the switch is deciding whether it matches, and in this repository's languages none can. An Elixir guard admits only guard-safe expressions — the compiler rejects anything else — and a bound value is never mutated in place. An Erlang guard admits only comparisons, arithmetic and guard BIFs — the compiler rejects anything with an effect — and a variable is bound exactly once. Not a gap in the analyzer and not a finding about your code.
- X22 Contradicted release guard — Not applicable: this check looks for a method whose returned value contradicts the flag its `finally` reads to decide whether to give back a lock it took, and in this repository's languages the body cannot set a flag that its cleanup reads. Elixir does not carry it across: a variable rebound inside `try do` is a new binding its `after` never sees, so the body cannot record a handoff where the cleanup can read it. Erlang will not compile it: a variable bound inside `try` is "unsafe" in its `after` clause, so the body cannot record a handoff where the cleanup can read it. Not a gap in the analyzer and not a finding about your code.
- X23 Unguarded diagnostic materialisation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X24 Document value interpolated into markup unescaped — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X26 Unsynchronised callback handoff — Not applicable: this check looks for a collection written by a callback on one thread while the body waiting on it touches it on another, and in this repository's languages no collection is reachable from two threads at once. Elixir processes share no heap: a value sent to another process arrives as a copy, so no collection is reachable from two processes at once. Erlang processes share no heap: a value sent to another process arrives as a copy, so no collection is reachable from two processes at once. Not a gap in the analyzer and not a finding about your code.
- X29 Per-element action decided by a fixed element — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X30 Support guard that admits what it rejects — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X31 Test-only surface in a production module — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X5 Nullable reference types — Not applicable: this check asks whether the null-typed discipline a language offers is switched on, and how much of that the assertion operator takes back, and in this repository's languages there is no such switch and no such operator. Elixir's `nil` is an atom in a dynamically typed language: `@spec`s are checked by an external analysis that has no nullability operator, so there is no null-typed discipline in the language to adopt. Erlang has no null: every variable is bound, absence is a value you pattern-match (`undefined`, `nil`, the error tuples), and there is no static type checker whose null warning could be turned on or off. Not a gap in the analyzer and not a finding about your code.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 14 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 29 finding(s)
- TodoComment instrumentation/opentelemetry_commanded/lib/commanded/process_manager.ex:54
- TodoComment instrumentation/opentelemetry_commanded/lib/commanded/event_handler.ex:54
- TodoComment instrumentation/opentelemetry_commanded/lib/commanded/process_manager.ex:56
- TodoComment instrumentation/opentelemetry_commanded/lib/commanded/event_handler.ex:56
- TodoComment instrumentation/opentelemetry_commanded/test/commanded/application_test.exs:44
- TodoComment instrumentation/opentelemetry_commanded/test/commanded/aggregate_test.exs:50
- TodoComment instrumentation/opentelemetry_elli/src/otel_elli_middleware.erl:50
- TodoComment instrumentation/opentelemetry_elli/src/otel_elli_middleware.erl:77
- TodoComment instrumentation/opentelemetry_oban/lib/opentelemetry_oban/plugin_handler.ex:124
- TodoComment instrumentation/opentelemetry_phoenix/lib/opentelemetry_phoenix.ex:187
- TodoComment instrumentation/opentelemetry_tesla/lib/middleware/opentelemetry_tesla_middleware.ex:436
- TodoComment instrumentation/opentelemetry_xandra/lib/opentelemetry_xandra.ex:109
- Unbounded dependency requirement: postgrex
- Unbounded dependency requirement: plug
- Unbounded dependency requirement: plug
- REDACTED
- REDACTED
- Swallowed exception (caught, then discarded) instrumentation/opentelemetry_elli/src/otel_elli.erl:36
- Swallowed exception (caught, then discarded) instrumentation/opentelemetry_elli/src/otel_elli.erl:44
- otel_http.extract_ip_port (cognitive 19) utilities/otel_http/src/otel_http.erl:334
- FileTooLong: task/supervisor.ex propagators/opentelemetry_process_propagator/lib/task/supervisor.ex
- REDACTED
- Duplicated block (22 lines × 2) instrumentation/opentelemetry_commanded/lib/commanded/aggregate.ex:41
- Duplicated block (19 lines × 2) instrumentation/opentelemetry_ecto/lib/opentelemetry_ecto.ex:304
- Duplicated block (10 lines × 2) instrumentation/opentelemetry_bandit/lib/opentelemetry_bandit.ex:478
- Duplicated block (7 lines × 2) instrumentation/opentelemetry_phoenix/lib/opentelemetry_phoenix.ex:318
- Duplicated block (8 lines × 2) instrumentation/opentelemetry_broadway/lib/opentelemetry_broadway.ex:368
- Duplicated block (10 lines × 4) instrumentation/opentelemetry_commanded/lib/commanded/aggregate.ex:85
- Duplicated block (7 lines × 3) instrumentation/opentelemetry_commanded/lib/commanded/application.ex:58
Minor — 9 finding(s)
- Off-boarding risk: anonymized user #1
- Further sole-owners (lower concentration)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- No ADRs
- README/code drift docs/reference/hooks.md:51
- Logging is not universal
Minor — 4 finding(s)
- Outdated: esbuild
- Outdated: phoenix
- Outdated: phoenix
- Outdated: phoenix_live_view
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-d305910488ed4a3888d3e95a0237d2e1/history.json --exit-code 0 --source . | 1 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-d305910488ed4a3888d3e95a0237d2e1/tree.json --exit-code 0 --source . | 1 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off . | 0 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 5 | artifacts/raw/trivy-fs.json |
| D31 · IaC & Container Security | trivy | — | trivy config --format json --quiet . | 0 | artifacts/raw/trivy-config.json |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | trivy | — | trivy fs --scanners vuln --format json --quiet --severity CRITICAL,HIGH,MEDIUM,LOW --skip-dirs **/bin/** --skip-dirs **/obj/** . --skip-db-update | 0 | artifacts/raw/trivy-fs.json |