Executive summary
sirupsen/napkin-math falls short of our standard for production, held back most by its Production Readiness lens, the way the code is tested, built, released and run. It scores 61 out of 100 and is rated Adequate, and all four of its critical findings are security problems in the build pipeline and in its code.
Production Readiness, at 52, is the weakest lens and counts most in the score. The best first step is adding automated security scanning, worth about 7 points. Recording design decisions comes next, worth about 5 points. Raising Production Readiness to 70 would lift the score to about 67.
Three pipeline tools are referenced by a changeable name, so the build pipeline can be tampered with. One place in the code runs text as code, which an attacker could use. Pinning each tool to an exact version and replacing text run as code with direct calls would close both risks.
The product code is 213 lines, too few for a meaningful rebuild estimate.
If Production Readiness rose from 52 to 70, the lowest score rated Strong, the score would rise from 61 to about 67.
New since the last survey: 3 findings
- Dependency Vulnerabilities · REDACTED
- Dependency Vulnerabilities · REDACTED
- Supply-chain Provenance & Signing · REDACTED
Fixed since the last survey: 59 findings
- Cognitive Complexity · napkin_math::tcp_read_write (cognitive 23) src/main.rs
- Cognitive Complexity · napkin_math::benchmark (cognitive 16) src/main.rs
- God Classes · FileTooLong: src/main.rs src/main.rs
- Code Duplication · Near-duplicate member family (4 members, 10 shared lines) go/main.go
- Code Duplication · Members sharing a duplicated core (5 members, 50+ identical tokens) go/main.go
- Code Duplication · Duplicated block (21–26 lines × 2) src/main.rs
- Code Duplication · Duplicated block (16 lines × 2) src/main.rs
- Code Duplication · Duplicated block (9–11 lines × 2) src/main.rs
- Code Duplication · Duplicated block (8 lines × 2) src/main.rs
- Code Duplication · Duplicated block (8 lines × 2) src/main.rs
- Code Duplication · Duplicated block (7 lines × 2) src/main.rs
- Code Duplication · Duplicated block (14 lines × 4) go/main.go
- Code Duplication · Duplicated block (14 lines × 2) go/main.go
- Code Duplication · Duplicated block (9 lines × 2) go/main.go
- Code Duplication · Duplicated block (5 lines × 4) go/main.go
- Code Duplication · Duplicated block (5 lines × 4) go/main.go
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Explicit Debt · TodoComment src/main.rs
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · High: watchdog-unverified-shell-installer-download script/provision.sh
- Static Analysis (SAST) · Medium: math-random-used go/main.go
- Dependency Vulnerabilities · Critical CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · Critical CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · High vulnerability: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · High CVE: [GHSA redacted] go/go.mod
- Dependency Vulnerabilities · Medium CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · Medium CVE: [GHSA redacted] REDACTED
- Dependency Vulnerabilities · Medium CVE: RUSTSEC-2024-0006 REDACTED
- Dependency Vulnerabilities · Medium advisory (unmaintained): RUSTSEC-2021-0127 REDACTED
- Dependency Vulnerabilities · Medium advisory (unmaintained): RUSTSEC-2024-0375 REDACTED
- Dependency Vulnerabilities · Medium advisory (unmaintained): RUSTSEC-2024-0384 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2021-0145 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2023-0055 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2023-0086 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2026-0097 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2026-0097 REDACTED
- Dependency Vulnerabilities · Medium advisory (unsound): RUSTSEC-2026-0253 REDACTED
- Dependency Vulnerabilities · Medium vulnerability: RUSTSEC-2023-0018 REDACTED
- Dependency Vulnerabilities · Medium CVE: GO-2022-0969 go/go.mod
- Knowledge Freshness · Orphaned knowledge src/main.rs
- Supply-chain Provenance & Signing REDACTED
- Observability · No structured logging
Top priorities
Diagnosis: what the measurements show together
At a glance — Code Health
At a glance — Architecture
At a glance — Maturity
At a glance — Readiness
At a glance — Security
At a glance — Performance
Security & Compliance — OWASP Top-10 mapping
| OWASP category | Findings | Severity |
|---|---|---|
| A05:2025 — Injection | 6 | High / Critical |
| A03:2025 — Software Supply Chain Failures | 5 | Medium |
Roadmap
First, integrate static analysis into the CI pipeline to automatically block security regressions before they merge. Second, establish a changelog to track release history and document key architectural decisions in a dedicated folder to preserve institutional knowledge. Third, enforce type safety by adopting a checker like Sorbet or Steep, progressively tightening types file by file while eliminating unsafe nil assertions. Finally, ensure the test suite runs explicitly in CI and serves as a mandatory gate for all merges.
| Do this | Helps | Effort | Dimension |
|---|---|---|---|
| Add a SAST step to CI running what this repository's stack ships: brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack — so a security regression fails the build instead of landing. | +6.9 pts | Medium | Security & performance tooling |
| Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them. | +4.9 pts | Medium | Architecture documentation |
| Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release. | +3.7 pts | Medium | Release Hygiene |
| Adopt a checker and raise it file by file: with Sorbet, `srb init` (or `bundle exec tapioca init`) commits `sorbet/config`, then move each file's sigil from `# typed: false` to `# typed: true` and on to `strict` as its methods get `sig`s — `spoom bump` does the moving; with Steep, write RBS signatures and `check` the product directories in the `Steepfile` under `D::Ruby.default` or `strict`, not `lenient`. Then pay down the assertions rather than adding to them: each `T.must` is a nil the checker could not rule out — narrow it (`return unless x`, `x&.`, `if (y = x)`), make the attribute non-nilable and set it in `initialize`, or change the method so the nil cannot arrive. | +2.9 pts | Medium | Nullable reference types |
| Run the test suite in CI via an explicit runner step for your stack, and gate merges on it. | +2.7 pts | Medium | CI/CD gates |
| Add a build/run (quick start) section to the root README — the first thing a newcomer needs. | +1.9 pts | Medium | Documentation (README) |
| Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root. | +1.9 pts | Medium | Folder & project structure |
| Resolve the 2 TodoComment finding(s) in Explicit Debt — start with REDACTED (2). | +0.3 pts | Low | Explicit Debt |
File quality
| File | Score | Band | Worst signal |
|---|---|---|---|
| REDACTED | 1.4 | Slop | Static Analysis (SAST): High: REDACTED |
| REDACTED | 4.5 | Mixed | Static Analysis (SAST): High: REDACTED |
| REDACTED | 5.9 | Mixed | Dependency Vulnerabilities: Medium advisory (unmaintained): REDACTED |
How the grades work
A definite problem that already costs you something and drags the score down: a missing authorisation check, a dependency with a known exploit, a build that does not reproduce. Failure here tends to cause failures elsewhere.
Likely wrong, but not failing yet. It degrades the codebase over a longer horizon and can cause failures elsewhere — not urgent this week, not something to carry for two years either.
Recorded, with no effect on how the codebase functions. Present so the survey is complete, not because it needs doing.
Something this survey could not settle from the outside, and which could be critical or serious. Either a control was required and no positive evidence of it exists in the repository — a backup job that nothing shows was ever restored from proves nothing about restores — or our own analysis could not run over that part of the tree. This is not a clean result. These are excluded from the score rather than awarded a pass, so the number on the cover neither rewards nor penalises them: if you act on this survey without resolving them, you carry that risk yourself. Each one is named under Limitations.
Methodology & how to trust this report
Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 46 of 46 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); none rely on LLM judgement. Overall confidence is 0.7 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.
What we checked — 46 dimensions across the health lenses
- Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 14 of 24 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line.
- Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
- Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.
Tools & methods
| Method | Backs | Version | Evaluator |
|---|---|---|---|
| Roslyn static analysis | Complexity, cohesion, coupling, dead code, API surface, layering | 5.3.0 | ✓ deterministic |
| Native secret scanner | Hardcoded secrets / credentials | 1.0.0 | ✓ deterministic |
| Watchdog duplication detector (in-process) | Code duplication | 1.0.0 | ✓ deterministic |
| Coverage (coverlet / dotnet-coverage) | Line & branch coverage | 10.0.400 | ✓ deterministic |
| NuGet / dotnet | Outdated, vulnerable & deprecated dependencies | 10.0.400 | ✓ deterministic |
| git / LibGit2Sharp | Churn hotspots, knowledge concentration, history | 2.43.0 · 0.31.0 | ✓ deterministic |
| gitleaks · semgrep · trivy | Secrets in history, SAST, CVEs, IaC & container, PII / GDPR | 1.86.0 · 0.69.3 | ✓ deterministic |
| LLM (sampled · advisory) | Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement | — | ◐ LLM · sampled · advisory |
Run transparency — what happened this run
- D1 Cyclomatic Complexity — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.rb) had no cyclomatic complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D2 Cognitive Complexity — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.rb) had no cognitive complexity computed for it: no method bodies were exposed for those file kinds by any language model this pass could load.
- D4 Code Duplication — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Most of this repository's production source (.rb) was not read by duplication detection: no source of those file kinds was exposed to the token comparison by any language model this pass could load.
- D5 Coupling — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- D8 Code Coverage — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Coverage NOT MEASURED: test source is present (.rs) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures. You can widen what we reach: optional: produce a coverage report in a standard format (lcov — `cargo install cargo-llvm-cov`, then `cargo llvm-cov --lcov --output-path lcov.info`) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures — then the real number is read on the next scan.
- D11 Test Reliability — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Test source is present (.rs) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.
- D14 License Compliance — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. This repository declares a Cargo manifest, but the licence verdict published here was taken over its gem dependencies. Nothing was read about its Cargo dependencies' licensing in either direction, and a clean score on this card must not be read as covering them.
- D15 Churn × Complexity Hotspots — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. A hotspot is churn × complexity. Churn was measured (8395 line(s) across the 90-day window), but no complexity could be computed for .rb, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.
- D16 Bus Factor — not measured this run — This is a true statement about the repository that carries nothing for its owner to act on, so it is reported here rather than as a defect in their code. Single-maintainer repository — bus factor is not applicable (9 contributor(s) across 204 commit(s) sampled, automation and bot accounts excluded). One of them holds 91% of the history; the other 8 hold 1.1% each on average, below the 5% at which there is somebody to hand the work to. That is a single maintainer with drive-by contributors, not a team whose knowledge has concentrated — so the bus factor is not applicable and there is nothing here for the owner to act on.
- D19 Documentation Quality — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. Each ecosystem's manifests (what makes a folder runnable or a published package) need their own proof before D19 judges its units. Until then those folders' READMEs are judged only as documents (boilerplate, structure), never counted as complete.
- D22 Internal API Consistency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. D22 identifies the intentionally-exposed surface from `IsPackable` and `.Contracts` project names, MSBuild conventions read off the loaded project set. This target exposed no such projects, so the probe never ran; this says nothing about whether the repository has a public API. This repository commits no C#/VB source at all, so there was never an MSBuild project set to read these conventions off. That is OUR side and it is an ADMISSION gap, not an environment fault: it declares a published package (Cargo.toml), but no published-package marker D22 reads admitted any project here. D22 DOES collect the public API of every language in this tree, and admits a project only when its manifest makes that ecosystem's publication act in a form the marker recognises — so what is missing is not a collector but an admission rule for the publication act this repository makes, if it makes one. The remedy is a better discriminator for that marker — not a collector, and no change to the scan image can close it. The marker's rules are measured to refuse applications, so one refused repository is the rule working as calibrated; several are the evidence that it is too strict.
- D24 Comment Value — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check's reader does not cover the language this repository's product is written in, so it had nothing of the product to read. That is a gap in this analyzer's language reach — not a finding about this repository.
- D26 Project Cohesion — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. Project size and spread are measured over build units (a .NET project, a Maven or Gradle module, an npm, Deno or JSR package, a Go module, a Cargo crate, a Python, Composer, Bundler, RubyGems, Mix, rebar3, sbt, SwiftPM or pub package, an OTP application, an Xcode project or XcodeGen spec, or a checkout that declares no build at all) whose source a code model reads. This repository's production source is in a language no model reads, or in units whose build tool D26 does not recognise. That is a gap in this analyzer's language reach — not a finding that the repository's projects are cohesive.
- AX2 Stateful singletons — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is implemented over the C# syntax tree, and no C# was loaded on this run, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- AX6 Interface segregation — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check is computed over the public interfaces this run's compilations declare, and none was loaded, so it had nothing to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
- C1 Data Protection — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysql2' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C3 Audit Trail — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysql2' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C4 Data Retention — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysql2' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- C5 Data-Subject Rights — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. 'mysql2' is imported (REDACTED:1), but no entity, schema, table or model declaration this check reads was found beside it, so whether personal data is stored could not be decided.
- ED5 Idempotency — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check finds retry-prone mutations by walking the repository's declared types, and NONE was loaded on this run, so it had nothing to look at. That is a limit of the analyzer's reach — neither a .NET project nor a language model of this repository's code reached it — not a finding that this repository has no command handlers or message consumers.
- P1 CI/CD gates — measured, with a gap in what it reached — Watchdog measured this, but not all of it. What it did not reach is a gap on our side — a collector, parser or image we have not built yet — so the numbers on that dimension cover less than the repository, and the part left out is not evidence that it would have passed. A CI pipeline exists and the word "test" appears, but no explicit test-runner invocation (your stack's test command, or a test job) was matched — so either the gate runs tests through a step this pass could not recognise, or "test" is incidental here (a path, "latest", a reporter). Which of the two it is cannot be settled from this dimension's evidence; the coverage dimensions report whether a suite exists at all. You can widen what we reach: name the test runner explicitly in the pipeline step (your stack's test command, or a job named for the suite) so the gate is unambiguous to a reader and to this pass.
- PF3 Async & latency hygiene — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. No function of a language this check models was read, so there was no async code to examine. That is a limit of the analyzer on this repository, not a finding about it.
- X7 Silent fallback defaults — not measured this run — Watchdog could not measure this here. That is a gap on our side — a collector, parser or image we have not built yet — and it is neither a defect in this repository nor evidence that the check would have passed. This check reads C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift and Dart syntax only, and no C#, Python, TypeScript/JavaScript, Rust, Go, Java, Kotlin, Scala, PHP, Ruby, Swift or Dart was loaded for this repository, so it had nothing of this repository's product to read. That is a gap in this analyzer's language reach — not a finding that the repository is free of what this check looks for.
Limitations & what we did not check
Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.
Per-dimension blind spots
- D12 Dependency Hygiene: Dependency health reads manifests and lockfiles — a vulnerability in a vendored/copied dependency, or risk from how a dependency is actually used, is outside this view.
- D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
- D14 License Compliance: License compatibility is checked against declared package metadata and a policy — mislabelled or missing license metadata, and obligations that depend on how you distribute, are not resolved here.
- D17 Explicit Debt: Acknowledged-debt signals (TODO/FIXME, suppressions, dead code) are textual — undocumented debt that nobody marked, and debt that lives in design rather than annotations, is invisible. Committed machine-written code (scaffolded migrations, designer/codegen output, generated stubs) is excluded — it is never the team's dead code to delete.
- D19 Documentation Quality: Documentation quality publishes two things only: a runnable or packaged unit with no example, and a multi-project root README that maps none of its parts. It does not judge clarity, and its other checks (overview, licence, boilerplate, structure, empty sections, XML-doc coverage) are withheld after adjudication: their candidates are counted in the card's gaps, not shown as rows. A false statement in a document is M4's; units are .NET projects only.
- D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
- D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
- D30 Dependency Vulnerabilities: CVE matching depends on accurate package/version metadata and on the advisory databases — a vulnerability with no published advisory, or in code not declared as a dependency, is not seen. Coverage needs a RESOLVED graph: an unpinned requirements.txt, or a pom without a resolved build, yields partial coverage rather than a clean verdict. An ecosystem the analyzer cannot scan is reported as unmeasured, never as clean.
- D34 Knowledge Freshness: Freshness is decayed commit RECENCY, not comprehension — code read often but rarely committed reads as orphaned, and stable code that genuinely needs no changes is penalised the same as forgotten code; bot/squash commits distort it like the bus factor.
- D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
- D43 Malicious Dependencies: Only packages some vulnerability database has already NAMED as malicious are seen — a compromise published in the last hours, or never reported at all, is invisible here, and this dimension reading 10 is not evidence that a dependency is trustworthy. There is no typosquat or dependency-confusion analysis: a package nobody has reported is simply absent from the feeds. Coverage is the dependency scan's: an ecosystem that could not be scanned is disclosed as unmeasured, never as clean.
- D44 Platform End-of-Life: The support table is FROZEN, so it goes out of date by losing RECALL: a release that ended support after the table was written is missed until the table is refreshed, and this dimension reading 10 is not evidence that a platform is current. Only platforms the repository DECLARES in a place this pass reads are seen — a runtime named only in a Dockerfile (D31's subject), in a CI workflow (D29's), or in a file this pass does not parse (go.mod, a Gemfile ruby directive) is invisible here, which is why a repository declaring none of them abstains rather than scoring. Only frameworks with a PUBLISHED support policy are tracked: React, Flask and Express publish none, so their age cannot be judged and their absence from a report is not a statement that they are supported.
- AX10 Code composition: Role is inferred from namespace/folder convention, not semantics — a domain concept living in a folder named "Services" reads as application, and the split is lines-of-code, not business value. The business-logic-share score is a SOFT, FLOORED signal: it contributes to the Architecture lens but is floored at the Critical gate, so an infrastructure-heavy design (a gateway, an ETL, a driver) is legitimately low without being nuked to zero.
- M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
- P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.
Dimensions
D12 · Dependency Hygiene
2 outdated direct gem(s), 0 pinning defect(s). 4 declaration(s) graded against rubygems.org, 4 of them against a version resolved in a committed Gemfile.lock. Whether any of these gems is DEPRECATED or YANKED is not graded — rubygems.org publishes no deprecation marker, and a yank removes a version rather than flagging it. Whether any is UNMAINTAINED is not graded either: no registry publishes a maintenance status, and release age does not stand in for one. Whether any is UNUSED is a source question, not a registry one. Known CVEs in this dependency graph are D30's question, read from the manifest there.
D13 · Secret Scanning
Secret scan ran and found no leaked secrets.
D14 · License Compliance
0 of 3 shipped gem(s) use a banned license. Licences were resolved from rubygems.org over the 3 gem(s) a consumer installs — this repository's runtime declarations closed transitively over its committed Gemfile.lock. Development-group and `add_development_dependency` gems are excluded: they are not distributed with this repository. ★ COVERAGE OF THIS VERDICT: it grades this repository's gem dependencies and nothing else. The repository also declares a Cargo manifest, and the licences of those dependencies were NOT read by this pass — a gap in this engine's coverage, not a statement about them. So this result says the graded closure carries no banned licence; it does NOT say this repository's licensing is clear.
D17 · Explicit Debt
2 deducted task-comment markers across 213 LoC (0.1/KLoC) → score 9.8. Task comments only: this repository's language is read without a compiler, so D17's suppression, dead-code and commented-out-code arms did not run and this score counts fewer marker kinds than a .NET repository's would.
What to do
- Resolve the 2 TodoComment finding(s) in Explicit Debt — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Enforce Explicit Debt in CI to reach Verified (currently Documented). — Hardens enforcement from Documented toward Prevented — provenance only; does not change the score.
D19 · Documentation Quality
1 of 1 documentation facets pass in full. 1 document(s) read across 1 unit(s).
D28 · Secrets (history)
gitleaks scanned the full history AND the current working tree and found no secrets.
D29 · Static Analysis (SAST)
6 finding(s): 0 critical, 4 high, 2 medium, 0 low. 3 unpinned-GitHub-Actions row(s) are reported here but scored by D36 (supply-chain provenance), which measures that posture as `pinned_actions` — one pinning decision is charged once, not once per lens.
What to do
- Resolve the 1 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED. — One of this dimension's main actionable groups (1 issue-level).
- Resolve the 2 REDACTED finding(s) in Static Analysis (SAST) — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- No action in Static Analysis (SAST) — all 3 REDACTED finding(s) are reported here at file:line but scored by D36 (supply-chain provenance), so none is charged to this dimension. — One of this dimension's main actionable groups (3 issue-level, 0 of them charged here).
D30 · Dependency Vulnerabilities
5 finding(s): 0 critical, 0 high, 5 medium, 0 low.
What to do
- Resolve the 2 Medium advisory (unmaintained) finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 2 Medium vulnerability finding(s) in Dependency Vulnerabilities — start with REDACTED (2). — One of this dimension's main actionable groups (2 warning-level).
- Resolve the 1 Medium advisory (unsound) finding(s) in Dependency Vulnerabilities — start with REDACTED. — One of this dimension's main actionable groups (1 warning-level).
D34 · Knowledge Freshness
Every significant source file has living knowledge — recently and meaningfully worked. Counted over 1 of the 4 production source files in this repository: the rest are under the ~2,400-byte size floor this dimension measures over.
D35 · Change Coupling
No strong hidden change-coupling between production files.
D43 · Malicious Dependencies
No dependency in any ecosystem this repository declares is published as malicious.
D44 · Platform End-of-Life
0 end-of-life runtime(s) and 0 end-of-life framework(s), read from 0 platform declaration(s) and 4 dependency declaration(s). This dimension reads what the repository says about ITSELF — a pinned target framework, a version file, a capped requires-python, a Rust toolchain pin, a framework major a constraint cannot move off. A FLOOR is deliberately never charged: `requires-python = ">=3.8"` states what the package SUPPORTS, not what it runs on, and a well-maintained library declares exactly that while running its own CI on a current release. The end-of-life facts are FROZEN and dated, so this dimension needs no network and answers identically inside a closed scan fence; as the table ages it loses recall and never precision, because a statement about support that ended in the past cannot become false. The OS layer of a container image is D31's question and the toolchain a CI workflow installs is D29's; this row is neither.
Frontend & cross-cutting dimensions
AX10 · Code composition
What to do
- The domain core is a small share of production code, but most of the rest matched no layer vocabulary at all — so this is not yet an anemic-domain finding. The namespace/path convention could not place that code, which makes the composition above a statement about the naming, not about the design. Name the layers (or check that the repository's conventions differ from the ones this check knows) before reading a thin domain into it.
AX3 · Project dependency cycles
AX4 · Dependency direction
GD1 · Unfinished & placeholder code
IC1 · Incompleteness & stubs
M1 · Documentation (README)
What to do
- Add a build/run (quick start) section to the root README — the first thing a newcomer needs.
- Explain in the README how to run the tests. Add a section called Testing to the README in the repository's top folder, saying how to run the test suite.
- Add an 'Architecture' / 'How it works' section to the root README — the high-level shape.
M2 · Architecture documentation
- No Architecture Decision Records found — no conventional ADR directory, no numbered `NNNN-title` documents in any markup this check reads, and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.
What to do
- Record your significant design decisions. Write one short document per decision, giving its date, the situation, the decision and its consequences, and keep them together with your other design documents. A docs/adr folder with each file named by number and title is the easiest place to find them.
M3 · Folder & project structure
- Production code isn't grouped under a src/ folder — it's spread across several top-level directories, so there's no one place that says 'this is the product'.
- Tests aren't where this ecosystem separates them — a `#[cfg(test)] mod tests` block beside the code it tests (with `tests/` reserved for integration tests) is the convention, and none is present.
What to do
- Group production code under src/ (or split deliberately, e.g. backend/ + frontend/) so production and tooling code aren't mixed at the root.
- Add `#[cfg(test)] mod tests` blocks beside the code they cover — the attribute keeps them out of the release build, a stronger separation than a folder — reserve `tests/` for black-box integration tests, and run `cargo test` in CI.
M4 · Documentation accuracy
P1 · CI/CD gates
- A CI pipeline exists but no build step was matched — changes may merge without the build ever running. A build step may be invoked directly as a command, or declared as a task that a runner named in the pipeline resolves.
What to do
- Run the test suite in CI via an explicit runner step for your stack, and gate merges on it.
- Add an explicit build step to your CI pipeline — your stack's own build command, or, if the pipeline delegates to a task runner, a build task that runner executes in CI — so every change is built before merge.
P3 · Security & performance tooling
- No static application security testing detected. For this repository's stack, add brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack as a CI step. What was searched, so you can tell an absence from a miss: the 302 CI workflow file(s) in this repository, and the scanner and linter configuration checked in beside them. A scan that runs outside CI, one configured in your forge's web UI rather than in a committed file, or a tool whose name is none of those this check carries, is not seen — if that is your case the row is wrong, and saying so is more useful than adding a second scanner.
What to do
- Add a SAST step to CI running what this repository's stack ships: brakeman for Rails apps, otherwise `semgrep --config=auto` or CodeQL's ruby pack — so a security regression fails the build instead of landing.
- Enable Dependabot/Renovate or a dependency-review gate.
- Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.
P6 · Release Hygiene
- No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)
What to do
- Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.
PF1 · Benchmark discipline
X1 · Async correctness
X12 · Unreachable branch
X13 · Undrained process stream
X14 · Bypassable address classification
X15 · Unvalidated length from an untrusted reader
X16 · Unfloored truncation loop
X17 · Uncapped recursion over a caller-supplied document
X18 · Disposal-pattern correctness
X19 · Unrestored process-global state
X21 · Side-effecting pattern guard
X22 · Contradicted release guard
X23 · Unguarded diagnostic materialisation
X24 · Document value interpolated into markup unescaped
X25 · Inert configuration knob
X26 · Unsynchronised callback handoff
X27 · Collection changed while being enumerated
X28 · Index access outside its own emptiness guard
X29 · Per-element action decided by a fixed element
X3 · Exception handling
X30 · Support guard that admits what it rejects
X5 · Nullable reference types
- This repository commits no Sorbet configuration (`sorbet/config`) and no `Steepfile`, so nothing type-checks its 3 Ruby product file(s): a nilable value reaches a method call silently and raises `NoMethodError: undefined method … for nil` the first time it is nil. A `# typed:` sigil does nothing without a `sorbet/config` beside the code; a Steep run configured only on a command line is not something this check can read.
What to do
- Adopt a checker and raise it file by file: with Sorbet, `srb init` (or `bundle exec tapioca init`) commits `sorbet/config`, then move each file's sigil from `# typed: false` to `# typed: true` and on to `strict` as its methods get `sig`s — `spoom bump` does the moving; with Steep, write RBS signatures and `check` the product directories in the `Steepfile` under `D::Ruby.default` or `strict`, not `lenient`. Then pay down the assertions rather than adding to them: each `T.must` is a nil the checker could not rule out — narrow it (`return unless x`, `x&.`, `if (y = x)`), make the attribute non-nilable and set it in `initialize`, or change the method so the nil cannot arrive.
Reference — by lens
| Lens | Score | Rating | Impact |
|---|---|---|---|
| Code Health | 73% | Adequate — gated by X5 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Maturity | 57% | Adequate — gated by M2 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Readiness | 52% | Adequate — gated by P3 | Capped at Fair by a Critical contributor — resolve it before relying on this lens. |
| Security | 93% | Exemplary | Strongest area. |
| Performance | 90% | Exemplary | Solid. |
Unscored — 1 check(s) recorded observations but carry no score
- D36 Supply-chain Provenance & Signing — 1 observation(s) recorded · The CI pipeline builds and tests but publishes no released artifact — no package publish, container push, GitHub release or deployment step. Supply-chain provenance, signing and SBOM attest RELEASED artifacts, so there is nothing to attest here. Add them to the release pipeline when this repo starts shipping artifacts (a published package, a container image, a deployed service or a tagged release). Build integrity and workflow-token hygiene are reported below: they describe what the CI runs and the token it runs with, neither of which is affected by whether the pipeline ships an artifact.
Not evidenced — 5 control(s) we could not find positive evidence for
- C3 Audit Trail — Not assessed: this repository stores data through 'mysql2' (REDACTED:1) but declares no persisted model this check reads (ActiveRecord and Sequel migration columns, db/schema.rb, Mongoid document fields). Personal data may be written through raw SQL or a hosted backend, so whether its changes need an audit trail could not be established, and the trail's absence is not scored.
- C4 Data Retention — Not assessed: this repository stores data through 'mysql2' (REDACTED:1) but declares no persisted model this check reads (ActiveRecord/Sequel migration and db/schema.rb columns, Mongoid document fields). Personal data may be written through raw SQL or a hosted backend, so whether a retention limit applies here could not be established, and its absence is not scored.
- C5 Data-Subject Rights — Not assessed: this repository stores data through 'mysql2' (REDACTED:1) but declares no persisted model this check reads (ActiveRecord migration and db/schema.rb columns, Sequel migration columns, Mongoid fields). Personal data may be written through raw SQL or a hosted backend, so whether data-subject rights apply here could not be established, and their absence is not scored.
- P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
- P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
Not included — 66 check(s) not relevant to this codebase
- AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
- AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
- AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
- AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
- AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
- AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
- AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
- AX1 Captive dependencies — Not applicable: this repository's Ruby imports no dependency-injection container and defines no container of its own — nothing that both registers and resolves bindings, and nothing that names two lifetimes — so nothing holds one lifetime's instance while handing out another's.
- AX2 Stateful singletons — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX5 Architecture & structure — not assessed — architecture style/structure is computed from a project graph (projects, types, module namespaces) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- AX7 Slice cohesion — not applicable — not a vertical-slice architecture
- AX8 Test isolation — no test/production split to check
- AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
- AXB1 Runtime evidence locked — no reproducible boot — This repository has nothing the runtime tiers could boot or serve — no markup, no UI framework or web-server dependency, no UI component source, no native UI project and no API definition — nothing here is a surface to boot — so runtime a11y/egress/header evidence has no subject here. Not applicable: this is neither a gap in the scan nor a finding about your code.
- C1 Data Protection — Not assessed: this repository stores data through 'mysql2' (REDACTED:1) but declares no persisted model this check reads (ActiveRecord migration and db/schema.rb columns, Sequel migration columns, Mongoid fields). Personal data may be written through raw SQL or a hosted backend, so the absence of a personal-data field here is not evidence that none is stored, and encryption at rest is not scored over a subject that could not be established.
- C2 Access Controls — No access-control surface detected in the analyzed source — this repository draws no route and defines no request handler (no Rails routes.draw or controller, no Sinatra, Roda or Grape application, no Hanami action). Access control is therefore N/A here — a gem is authorized by the application that mounts it, not by itself. If this codebase grows request handlers, the dimension reactivates and a default-deny posture is expected then.
- D1 Cyclomatic Complexity — cyclomatic complexity not measured — .rb exposed no member bodies
- D10 Test Quality — ~3151 lines of test source are present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- D11 Test Reliability — Test reliability not included — no .rs test runner
- D15 Churn × Complexity Hotspots — complexity unreadable for .rb — churn × complexity hotspots could not be measured
- D16 Bus Factor — single-maintainer repository — bus factor is not applicable
- D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
- D2 Cognitive Complexity — cognitive complexity not measured — .rb exposed no member bodies
- D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
- D21 Naming Consistency — N/A — no production C# declarations to compare.
- D22 Internal API Consistency — The exposed public-API surface could not be collected — no C#/VB projects loaded.
- D23 Boundary Type-Coupling — No bounded-context organisation was detected either — neither a context-shaped layout, nor 2+ sibling source directories each declaring an aggregate root, nor 2+ projects each declaring an entity of their own. Declaring this codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
- D24 Comment Value — D24 reads C# and Visual Basic comments only — this repository's production source is .rb, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D25 ADR Conformance — no ADRs to check
- D26 Project Cohesion — D26 measured no build unit over this repository's .rb source. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
- D3 God Classes — Most of this repository's production source (.rb) was not read by god-class detection, so class size was not assessed for the languages that are the product — whatever else this pass did read is not this repository's class size. Not scored — this is a gap in the analyzer, not a verdict about this repository.
- D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan.
- D32 Data Compliance (PII/GDPR) — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that.
- D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
- D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
- D4 Code Duplication — Duplication not measured — .rb not exposed to the token comparison
- D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
- D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
- D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
- D5 Coupling — D5 reads a .NET project-reference graph only — this repository's production source is .rb, which was left unread. Not scored: this is a gap in the analyzer, not a verdict about this repository.
- D6 Cohesion (LCOM4) — No production classes were analyzable, so cohesion (LCOM4) was not measured (the solution likely failed to load or has no production code).
- D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
- D8 Code Coverage — Coverage not included — suite not readable by the collector
- D9 Test Distribution — Test source is present (.rs) but no test cases reached the test census for this repository — no test root we could resolve declared them, or the files we read declare no cases in a test framework we recognise — so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
- DM1 Domain Modelling — not scored — this repository shows none of the 3 signals this lens looks for
- ED1 Event-Driven — not scored — this repository shows none of the 3 signals this lens looks for
- ED5 Idempotency — This check finds retry-prone mutations (command handlers and message/event consumers) by walking the repository's declared types, and none was loaded here, so it has nothing to report. That is a limit of the analyzer, not a finding about your code.
- ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this lens looks for
- P12 CI test-gate honesty — Reported, not scored — and nothing was matched here. The coverage check applies to any stack, and the automatic-re-run check to any GitHub-Actions workflow, but the checks for excluded tests, skipped tests and sleep-based synchronisation currently recognise only some ecosystems' test-runner idioms, so on a repository built with another stack the zeros below mean 'not checked', not 'clean'.
- P2 Observability — This repository's Ruby source (2 module(s), 4 file(s) read) declares no entry point and bootstraps no server, and nothing here deploys a service — it is a library, run inside whatever hosts it, so production observability (structured logging, tracing/metrics, health checks) is N/A. If it grows a binary or a service, the dimension reactivates.
- P7 Outbound HTTP resilience — not applicable — no HTTP server, API framework or worker entry point was found in the Ruby source, so there is no service whose uptime a failing dependency could take down
- P8 Schema migrations — no ORM, schema-migration tool or schema auto-create was found in this repository's dependency manifests or source, so there is no database schema for this check to judge
- P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (SimpleCov — `require "simplecov"` in your `spec_helper.rb`/`test_helper.rb`, which writes `coverage/.resultset.json` (or lcov via `simplecov-lcov`)) and commit it — a hosted scan measures a clone of the repository, so a report that exists only in a working tree, a CI runner's or your own, never reaches it; the artefact is commonly gitignored, so `git add -f` that one file (or un-ignore its path) and commit it alongside the code it measures, or wire coverage collection into CI, to enable this cross-layer check
- PF2 Allocation hygiene — Not applicable: Ruby runs on a garbage-collected runtime that gives a program no allocation-control idiom to choose on a hot path — no pools, stack allocation or value types — so allocation awareness is not something this code can be rated on.
- PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
- S1 Web-Security Posture — No web surface: 3 Ruby file(s) were read for weak hashes and ciphers, key material fixed in the source, disabled TLS certificate validation and obsolete TLS versions, and none was found. This repository serves no HTTP of its own — no `config.ru`, no web framework, Rack or server gem among its gemspec run-time dependencies or its Gemfile's production gems, and no Rails, Rack, Sinatra, Grape, Hanami, WEBrick, Puma or Falcon server defined or booted in its production source — so HTTPS enforcement, HSTS, cookie flags and input validation are N/A here, as they are for a C# library or worker. If this codebase starts serving HTTP, the dimension reactivates automatically.
- X10 Duplicated predicate — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X2 Cancellation propagation — no C# was loaded; this repository's Ruby was read, and no request in it can be cancelled by a caller — a Ruby request takes no token: Net::HTTP, Faraday and async-http are stopped from outside the call (Async::Task#stop, Thread#raise, Timeout), not through a parameter
- X20 Mistyped argument guard — This check asks whether an argument guard reports an EMPTY value as a NULL one, which needs a language that throws a null-specific argument exception — .NET's ArgumentNullException, the JVM's NullPointerException, Dart's ArgumentError.notNull. This repository contains none of those languages: the ones it is written in have a single exception for a bad argument, so there is no pair of exceptions to confuse and nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X32 Type resolved by simple name across every loaded assembly — This check is about how a .NET program searches the assemblies loaded into its process for a type, and this repository contains no .NET source, so there is nothing here for it to assess. Not a gap in the analyzer and not a finding about your code.
- X4 Structured logging — This check asks whether log calls keep a message's values apart from its text, which needs a logger that can carry them as fields. This repository's Ruby was read, and it logs through none: the standard library's Logger, which Rails.logger is, takes one finished message and no template arguments or fields (as log4net does in C#), so an interpolated message there loses nothing the API could have kept. The console gem (`Console.info`), SemanticLogger, Ougai and dry-logger would be judged.
- X6 Hand-rolled structured-format parsing — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
- X7 Silent fallback defaults — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
- X9 Subsumed condition operand — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
Appendix A — Findings (grouped)
Critical — 4 finding(s)
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Serious — 10 finding(s)
- TodoComment REDACTED:13
- TodoComment REDACTED:106
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
- REDACTED
Minor — 8 finding(s)
- REDACTED
- No ADRs
- No src/ separation
- No tests/ separation
- CI build step not evidenced
- No SAST
- No changelog
- Ruby's type checker does not check nil everywhere
Minor — 2 finding(s)
- Outdated: mysql2
- Outdated: pg
Appendix B — Reproduction & audit trail
| Dimension | Tool | Version | Command | Findings | Raw output |
|---|---|---|---|---|---|
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-cb1193ae233a4153b59b39f83c15ea71/history.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-history.json |
| D28 · Secrets (history) | gitleaks | — | gitleaks detect --no-git --no-banner --config /opt/gitleaks-rules/watchdog-gitleaks.toml --report-format json --report-path /tmp/watchdog-gitleaks-cb1193ae233a4153b59b39f83c15ea71/tree.json --exit-code 0 --source . | 0 | artifacts/raw/gitleaks-tree.json |
| D29 · Static Analysis (SAST) | semgrep | — | semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --config /opt/semgrep-rules/watchdog-sast.yml --json --quiet --timeout 10 --timeout-threshold 3 --metrics off --exclude *.arrow --exclude *.avro --exclude *.csv --exclude *.dat --exclude *.db --exclude *.feather --exclude *.geojson --exclude *.h5 --exclude *.hdf5 --exclude *.jsonl --exclude *.log --exclude *.ndjson --exclude *.npy --exclude *.npz --exclude *.orc --exclude *.parquet --exclude *.pickle --exclude *.pkl --exclude *.psv --exclude *.sqlite --exclude *.sqlite3 --exclude *.tfrecord --exclude *.tsv --exclude *.txt . | 6 | artifacts/raw/semgrep.json |
| D30 · Dependency Vulnerabilities | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 5 | artifacts/raw/osv-scanner.json |
| D31 · IaC & Container Security | trivy | — | trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Docker Compose, Terraform, Kubernetes/Helm, CloudFormation, ARM, Bicep, Ansible); nothing to scan. | 0 | — |
| D32 · Data Compliance (PII/GDPR) | semgrep | — | semgrep: not applicable — No personal data was found crossing a boundary the PII/GDPR ruleset checks — nothing written to a log or console sink, placed in a URL or query string, or persisted to browser storage. That is a clean result for the LEAK surface only: this ruleset detects personal data escaping, it does not inventory the personal data a repository holds, so it is not evidence that this repository has no personal-data surface. The personal-data map (Appendix C) and the C1-C5 compliance cards are what speak to that. | 0 | — |
| D37 · Vulnerability-disclosure Policy | disclosure | — | disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed. | 0 | — |
| D40 · Network Egress Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here. | 0 | — |
| D41 · Kernel & Syscall Confinement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here. | 0 | — |
| D42 · Runtime Threat Enforcement | runtime-hardening | — | runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here. | 0 | — |
| D43 · Malicious Dependencies | osv-scanner | — | osv-scanner --format json --recursive --experimental-disable-plugins transitivedependency/requirements --experimental-disable-plugins dotnet/csproj --experimental-disable-plugins dotnet/nugetcpm . | 0 | artifacts/raw/osv-scanner.json |