archunit-junit5-kotlin — Watchdog Audit

Executive summary

Read through the Production lens — the standard calibration. *Green* means good enough to run in production. The score is absolute and comparable across repos.

spanierm42/archunit-junit5-kotlin is sound in substance but carries real gaps (53%). It is not in crisis, but the issues below raise the cost of changing it — friction its consumers ultimately inherit.

It is strongest in Code Health (100%) — the code is clean and low-risk to change. Security (100%) is solid too.

The area that most needs attention is Readiness (26%) — releases are harder to depend on — versioning, release notes and dependency hygiene are thin, so consumers can't easily tell what changed or trust an upgrade. Architecture (69%) is the next concern — the code resists change, so features cost more over time.

Leadership focus, highest impact first: CI workflow that builds and runs the test suite on every push/PR (CI/CD gates); Keep a changelog (e.g. Keep-a-Changelog) recording what shipped… (Release Hygiene); Record significant decisions one document per decision (Architecture documentation).

For scale: Hobby (~41 production lines); rebuilding it from scratch would take roughly ~0.1 person-years (~1 engineer). Approximate, ±~30%.

It builds on a genuinely strong Code Health foundation (100%); the priorities above are the highest-leverage way to bring the rest up to that level.

Code Health 100% ★ Exemplary Architecture 69% Adequate Maturity 76% Strong Readiness 26% Weak · gated by P1, P3 Security 100% ★ Exemplary

How the score is built — each lens's share of the headline Width is the lens's weight in the worst-heaviest fold (the weakest area pulls hardest); colour is that lens's own band. A lens fixes the score in proportion to its width.

Readiness 26% · 47% weightArchitecture 69% · 26% weightMaturity 76% · 14% weightCode Health 100% · 8% weightSecurity 100% · 4% weight

Raise Readiness 26 → 70 (the Healthy floor) ⇒ headline 53 → ~74.

Code composition — where the lines go

Tests 100%

Rebuild cost & value ~ Modeled — €42–€210

Cost to rebuild	€42–€210 (0.1 person-years (1–2 h), ~1 engineer)
Domain complexity	Standard — harder problems cost more per line
Quality factor	0.7× (at 53% quality) — the last 20% of quality is most of the work
Size & shape	Hobby · effort split not classified (source measured from disk; the effort-tier breakdown is a C#-only syntax walk)

How we model this: boilerplate at a scaffolding rate + logic × domain Standard (×1.2) — DDD/clean architecture × a 0.7× quality factor, at €60–95/h; indicative, ±~30% · size measured directly from source · effort from total production LoC as straight-line logic (the tier split is a C#-only syntax walk), a conservative lower bound. Indicative only — most sensitive to the hourly rate and the domain tier (both tunable in config).

Top priorities

The highest-leverage moves; the full ranked list is in the Roadmap below.

Add a CI workflow that builds and runs the test suite on every push/PR.

+25.8 pts · Medium effort · CI/CD gates

Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.

+22.3 pts · Medium effort · Release Hygiene

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

+3.4 pts · Medium effort · Architecture documentation

Diagnosis — what's actually going on

Highest-leverage move · Medium · Leverage

Of everything flagged, the best return on effort is: Add a CI workflow that builds and runs the test suite on every push/PR. The rest can wait behind it.

Evidence: priority ranking: top of 4 ranked by impact/effort

→ Add a CI workflow that builds and runs the test suite on every push/PR.

Architecture — module dependency matrix

7 modules, 7 dependencies — 1 dependency cycle, shown as the red cell(s) above the diagonal. Rows and columns are the same modules, ordered so that a module only depends on ones above it. A cell means the row depends on the column, and its number is how many type pairs create that dependency. Read one thing: is anything above the diagonal? A mark there is a dependency cycle. (A cycle is all this shows — an unusual but cycle-free dependency sits below the diagonal like any other.)

At a glance — Code Health · 100% · Exemplary

The Good

D3 · Kotlin God Classes 10.0 D4 · Kotlin Code Duplication 10.0

At a glance — Architecture · 69% · Adequate

The Good

D35 · Kotlin Change Coupling 10.0 AX5 · Repo Architecture & structure 10.0

At a glance — Maturity · 76% · Strong

The Good

D19 · Kotlin Documentation Quality 7.0 D21 · Kotlin Naming Consistency 10.0 M1 · Repo Documentation (README) 8.0 M3 · Repo Folder & project structure 10.0 M4 · Repo Documentation accuracy 10.0

The Bad

M2 · Repo Architecture documentation 5.0

At a glance — Readiness · 26% · Weak · gated by P1, P3

The Good

D13 · Kotlin Secret Scanning 10.0

The Bad

P6 · Repo Release Hygiene 5.0

The Ugly

P1 · Repo CI/CD gates 0.0 P3 · Repo Security & performance tooling 0.0

At a glance — Security · 100% · Exemplary

The Good

D28 · Kotlin Secrets (history) 10.0 D29 · Kotlin Static Analysis (SAST) 10.0

Roadmap

First, establish a CI/CD pipeline to automatically build the code and run tests with every push or pull request. Next, implement a changelog to clearly record what has been shipped in each release. Then, document significant architectural decisions in a dedicated folder, ensuring each record includes the context, decision, and consequences. Finally, improve the overall documentation quality by expanding the README to fully explain the architecture and testing approach.

Ranked by impact ÷ effort. "Helps" is the estimated gain on the 0–100 health score.

Do this	Helps	Effort	Dimension
Add a CI workflow that builds and runs the test suite on every push/PR.	+25.8 pts	Medium	CI/CD gates
Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.	+22.3 pts	Medium	Release Hygiene
Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).	+3.4 pts	Medium	Architecture documentation
Improve Documentation Quality — currently 7.0/10.	+2.2 pts	Medium	Documentation Quality
Enable measurement for Text alternatives.	unlocks measurement	Low	Text alternatives
Enable measurement for Forms & labels.	unlocks measurement	Low	Forms & labels
Enable measurement for Page structure.	unlocks measurement	Low	Page structure
Enable measurement for Keyboard semantics.	unlocks measurement	Low	Keyboard semantics

Methodology & how to trust this report

Watchdog is a deep, periodic assessment — run each sprint, monthly, or quarterly, taking the time to go wider and deeper than a quick check and surfacing in one coherent report what you'd otherwise piece together from a dozen separate tools. It scores deterministically: the same commit yields the same score, every run. 14 of 16 evaluated dimensions are computed purely by tools and static analysis (confidence 1.0); 2 documentation/naming judgement(s) are LLM-assisted and labelled advisory. Overall confidence is 0.3 — the weighted average across measured dimensions; it falls as more of the score leans on LLM-assisted judgement and rises when it's fully tool-backed.

Every figure here is one of three kinds, and we label which: ✓ Measured — a deterministic fact (LoC, complexity, coverage); ~ Modeled — an estimate from a stated model (cost, effort, value-at-risk), always a range with its assumptions, never a precise fact; ◐ Advisory — an LLM prose judgement. We never present a modelled estimate as if it were measured. Perfect or absent scores carry their provenance too (ADR-0011): ✓ Tool-verified means the property itself was measured across the surface; ○ Nothing flagged means the probes came back clean — a claim bounded by what a repository can show; ⊘ Not evidenced means a working control (a tested restore, an automated rollback) showed no positive evidence — absence of evidence is not evidence of a control, so it's excluded from the score rather than awarded a spurious 10; ◐ Sampled · advisory marks an LLM verdict over a bounded sample — advisory, never a deterministic measurement.

What we checked — 16 dimensions across the health lenses

D3D4D13D19D21D28D29D35AX5M1M2M3M4P1P3P6

Each chip is a dimension scored from real signals across architecture, testing, dependencies, security & compliance, documentation, git-history and code quality — in one coherent pass. A surface report typically covers a handful.

How to trust any code-health report — three questions

Can you open the finding? Real findings cite a repo-relative file and line you can open at the cited line — never an absolute scratch path. Here, 0 of 8 do; the remainder are repo-wide signals — a dimension-level measurement, not a single line. (Every path in this report is repo-relative by construction: paths are normalized at the producer and the report is rejected if any rooted path leaks through.)
Is there a tool behind the number? Every score below names the method that produced it — Roslyn, git, a scanner, or (for a handful of documentation/naming dimensions) an LLM labelled sampled · advisory — not a narrative.
Does re-running give the same result? Run it again on the same commit and the score — and this report, byte for byte — is identical. A report whose numbers move between runs is describing the run, not the code.

This report answers yes to all three. That's the bar to hold any assessment to.

Tools & methods

The actual versions used this run (captured at analysis time) — re-run on the same commit for the identical score.

Method	Backs	Version	Evaluator
Roslyn static analysis	Complexity, cohesion, coupling, dead code, API surface, layering	5.3.0	✓ deterministic
Native secret scanner	Hardcoded secrets / credentials	1.0.0	✓ deterministic
jscpd	Code duplication	—	✓ deterministic
Coverage (coverlet / dotnet-coverage)	Line & branch coverage	10.0.302	✓ deterministic
NuGet / dotnet	Outdated, vulnerable & deprecated dependencies	10.0.302	✓ deterministic
git / LibGit2Sharp	Churn hotspots, knowledge concentration, history	2.43.0 · 0.31.0	✓ deterministic
gitleaks · semgrep · trivy	Secrets in history, SAST, CVEs, IaC & container, PII / GDPR	1.86.0 · 0.69.3	✓ deterministic
LLM (sampled · advisory)	Documentation quality, ADR conformance, naming — sampled over a bounded sample; advisory, never a deterministic measurement	Local LLM	◐ LLM · sampled · advisory

Every finding is locatable in findings.md. Run 019fc9fc-a4f5-7ccc-aa48-d9c2c19bf48f.

The exact command behind every deep-scan dimension — tool, version, invocation and retained raw output — is in Appendix B — Reproduction & audit trail.

Run transparency — what happened this run

What ran differently this time — a tool absent, degraded, or that fell back to an estimate. Named openly, not folded silently into the scores. A degraded run also records its exact cause in diagnostics.md.

D30 Dependency Vulnerabilities — scanner not present in this environment — The backing tool was not installed where this scan ran, so this dimension was not scored. Install the tool (or run in the hosted environment, where it is always present) for a graded result.

Repo exclusion declarations (.gitattributes linguist-generated/vendored, .editorconfig generated_code): none declared — every source file was scored.

Limitations & what we did not check

Watchdog assesses the repository exactly as committed, and only the repository. By design it does not reach outside the source tree: the live cloud account, the running CI/CD pipeline, the host's branch-protection and approval rules, the production configuration, or a restore actually exercised against a backup are all out of scope. That boundary is a feature, not a gap — a repo-relative, deterministic scan re-runs identically on any commit and every finding opens at a real file and line, where a live audit can neither be reproduced nor traced. The visible consequence is that controls which leave no in-repo evidence are reported as "not evidenced" and excluded from the score rather than awarded a number a static scan cannot justify.

Per-dimension blind spots

For each dimension that was measured, what a static, repo-only scan structurally cannot see — the honest edge of the measurement, not a failure of it.

D3 God Classes: "God class" is sized by members and responsibilities visible in the type — a deliberately broad facade over a coherent subsystem can read the same as an accidental grab-bag. For front-end JS the file-length check is cohesion-aware (a single-responsibility module — one class/IIFE — earns a 3× threshold), but cohesion is approximated from top-level declarations, not true dependency structure.
D4 Code Duplication: Duplication is token-similarity (jscpd) — it finds copy-paste, not semantic duplication expressed differently. Committed machine-written code (scaffolded migrations, designer/codegen output, protobuf/OpenAPI stubs, model snapshots) is EXCLUDED — its repetition is the tool's, not the team's — so the score reflects hand-written duplication only.
D13 Secret Scanning: Secret detection is signature- and entropy-based on the current tree — a secret that does not match a known pattern, or one already rotated, will not be flagged (a clean scan is "nothing matched", not "no secrets exist").
D19 Documentation Quality: Documentation quality is judged by an LLM over a bounded sample of docs — it reads what is written, not whether the docs match the running system, and it is advisory, not a measurement.
D21 Naming Consistency: Naming quality is an LLM judgement over a bounded sample — it assesses clarity/consistency of the names it sees, not domain-correctness, and is advisory.
D28 Secrets (history): Secret-history scanning sweeps the git log for known patterns — a secret that predates the available history, or never matched a signature, is not found (clean means "nothing matched in the history we can see").
D29 Static Analysis (SAST): SAST findings are pattern-based (semgrep) — it finds classes of bug it has rules for; logic flaws, auth/authorization gaps and issues needing runtime context are out of reach (and clean means "no rule matched").
D35 Change Coupling: Change coupling is co-change in COMMITS — files split across separate commits, or coupled only through a shared config/build step, read as uncoupled, and a sweeping commit (rename/format) is excluded so it doesn't couple everything. It shows that files change together, not WHY: a high coupling can be a healthy cohesive pair as readily as a hidden leak.
M4 Documentation accuracy: Onboarding quality is an LLM read of the docs/setup present — it cannot run the onboarding or measure how long a real new joiner takes; the verdict is sampled and advisory.
P6 Release Hygiene: Rollback/observability controls are inferred from repo artefacts (pipelines, dashboards-as-code) — controls configured in external tooling, with no in-repo trace, cannot be credited.

The LLM boundary

LLM-set scores this run (3): D19, D21, M4 (model: Local LLM). For these, a model reads a bounded sample and sets the numeric score (documentation, ADR quality, naming, comment value, onboarding) — D25 sets the ADR-conformance fraction over sampled code, D22 judges API accuracy over a sample. These are sampled and advisory by design: they vary at the margins between runs and are never a deterministic measurement. Every other score in this report is tool-computed at confidence 1.0.

Dimensions

D3 · God Classes10.0 / 10Exemplary✓ Tool-verified

What it measures: Over-large classes that try to do too much ("god classes").

Method: God-class detection by line and method-count thresholds per logical type (partial classes unified), filtered for generated code and registration/contract false positives. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

0 god class(es) detected.

✓ On the Gold path — maintain.

Detailed fixes: d3_recommendation.md.

Do you agree with this assessment?

D4 · Code Duplication10.0 / 10Exemplary✓ Tool-verified

What it measures: Copy-pasted code that should be shared instead.

Method: Code duplication via token-stream sliding windows with type-aware normalization (locals masked, type names preserved), density-scored per KLoC of production code. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Verified

0 duplicated block group(s) detected.

✓ On the Gold path — maintain.

Detailed fixes: d4_recommendation.md.

Do you agree with this assessment?

D13 · Secret Scanning10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets (keys, tokens, passwords) have leaked into the code.

Method: In-process native secret scanner (entropy plus signature patterns) across all tracked files; no external tool. A clean result is a measured 10, not no-data zero. Deterministic.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Prevented

Secret scan ran and found no leaked secrets.

✓ On the Gold path — maintain.

Detailed fixes: d13_recommendation.md.

Do you agree with this assessment?

D19 · Documentation Quality / 10Strong◐ Sampled · advisory

What it measures: Whether the project's documentation is clear, complete, and useful.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic doc sample (READMEs plus first 25 architecture docs), with two-pass stability filtering. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Strong / 10 · rule-coverage 100% · ceiling Documented

The single README is a focused documentation of generic architecture tests written in Kotlin using Junit5 for the onion/ports-and-adapters architectural style. It begins with an authoritative definition of 'onion architecture' and names the test file plus its prerequisites (the root package's domain, application packages), then explains each layer with concrete examples before clipping mid-sentence. The outline is visible from the top: Generic Architecture Tests with ArchUnit; Onion Architecture; Usage and Contribution.

What to do

Improve Documentation Quality — currently 7.0/10. — The single README is a focused documentation of generic architecture tests written in Kotlin using Junit5 for the onion/ports-and-adapters architectural style. It begins with an authoritative definition of 'onion architecture' and names the test file plus its prerequisites (the root package's domain, application packages), then explains each layer with concrete examples before clipping mid-sentence. The outline is visible from the top: Generic Architecture Tests with ArchUnit; Onion Architecture; Usage and Contribution.

Detailed fixes: d19_recommendation.md.

Do you agree with this assessment?

D21 · Naming Consistency / 10Exemplary◐ Sampled · advisory

What it measures: Whether names — types, methods, variables — are clear and consistent.

Method: Judged by language model at low temperature (0.0-0.1) on a deterministic random symbol sample (fixed size, not exhaustive), with disclosed confidence band. Advisory, sampled.

Maturity: Documented → Verified → Prevented · effective Exemplary / 10 · rule-coverage 100% · ceiling Verified

0 naming inconsistencies across 0 sampled symbols.

✓ On the Gold path — maintain.

Detailed fixes: d21_recommendation.md.

Do you agree with this assessment?

D28 · Secrets (history)10.0 / 10Exemplary○ Nothing flagged

What it measures: Whether any secrets were ever committed — scanned across the full git history, not just now.

Method: Git-history secret scan via gitleaks detect over full history in an isolated checkout; each match flagged High. Exhaustive; degrades cleanly when tool absent.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

gitleaks scanned the full history AND the current working tree and found no secrets.

✓ On the Gold path — maintain.

Detailed fixes: d28_recommendation.md.

Do you agree with this assessment?

D29 · Static Analysis (SAST)10.0 / 10Exemplary○ Nothing flagged

What it measures: Real static-analysis (SAST) findings — likely security bugs in the code, any language.

Method: Polyglot static analysis via semgrep across the repo using the pinned, image-baked p/security-audit + p/owasp-top-ten rulesets (no scan-time registry fetch); severity rules (ERROR/WARNING/INFO) map to a full-band severity-weighted score. Exhaustive, deterministic; degrades on parse failure.

Coverage: semgrep pattern rules over all files — exhaustive for the rule set, blind to classes of bug without a rule (clean = no rule matched).

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

semgrep found no security issues.

✓ On the Gold path — maintain.

Detailed fixes: d29_recommendation.md.

Do you agree with this assessment?

D35 · Change Coupling10.0 / 10Exemplary✓ Tool-verified

What it measures: Whether files that change together actually belong together — pairs that repeatedly co-change in git history despite having no explicit code dependency, surfacing the hidden/logical coupling (and boundaries in the wrong place) a static scan can't see.

Method: Pairwise co-occurrence over the per-commit file sets in git history (production source only — tests and generated dropped): Degree-of-Coupling = shared ÷ min individual revisions, reported above noise floors (each file ≥10 revisions, ≥5 shared commits, ≥50% strength); sweeping commits excluded. Deterministic over fixed history.

Coverage: Population: PRODUCTION source files only — test and generated files are dropped before pairing, so a class co-changing with its own test (trivially ~100%) can't drown the real production↔production coupling. Pairs ranked by Degree-of-Coupling; coupling through a build step, config, or non-source file isn't seen.

Maturity: Documented → Verified → Prevented · effective 10.0 / 10 · rule-coverage 100% · ceiling Documented

No strong hidden change-coupling between production files.

git history depth insufficient

✓ On the Gold path — maintain.

Detailed fixes: d35_recommendation.md · top locations in Appendix A, every location in findings.md.

Do you agree with this assessment?

Frontend & cross-cutting dimensions

R = React/JS · M = Maturity · P = Readiness.

AX5 · Architecture & structure10.0 / 10Exemplary✓ Tool-verified

Other · Architecture — Whether the codebase has a recognisable, scale-appropriate structure (a named architectural style, or modular enough for its size) rather than being an ad-hoc ball of mud.

Method: Roslyn plus csproj analysis: architecture style detection (DDD, clean, vertical-slice, CQRS) and structure fitness for repo size. Deterministic.

Do you agree with this assessment?

M1 · Documentation (README)8.0 / 10Strong✓ Tool-verified

Maturity · Maturity — Whether the repo and its projects have a README, and whether it's substantive and current.

Method: Filesystem scan: README presence, word count, and headings for depth; git history for staleness. Exhaustive across root and project dirs, deterministic.

Do you agree with this assessment?

M2 · Architecture documentation5.0 / 10Adequate✓ Tool-verified

Maturity · Maturity — Whether key decisions (ADRs) and the high-level shape (C4/diagrams) are written down.

Method: Filesystem scan: ADR folder/naming conventions or content, plus Mermaid/PlantUML/C4/architecture.md discovery. Exhaustive, deterministic.

No Architecture Decision Records found — no conventional ADR directory, no `NNNN-title.md` documents and nothing ADR-shaped by content. Design rationale recorded elsewhere (a design-notes tree, a mailing list, pull-request discussion) is not visible to this check and is not re-findable per decision, so a future maintainer cannot ask why one choice was made and get an answer.

What to do

Record significant decisions one document per decision — dated, stating the context, the decision and its consequences — and keep them together wherever your design docs already live (a conventional `docs/adr/` tree with `NNNN-title.md` names is the most discoverable form).

Do you agree with this assessment?

M3 · Folder & project structure10.0 / 10Exemplary✓ Tool-verified

Maturity · Maturity — Whether the repo is organised deliberately — src/test separation and consistent project naming.

Method: Filesystem scan: src/test folder separation and namespace-prefix consistency (majority RootNamespace agreement). Exhaustive across projects, deterministic.

Do you agree with this assessment?

M4 · Documentation accuracy10.0 / 10Exemplary◐ Sampled · advisory

Maturity · Maturity — Whether the README actually describes the code that exists (LLM-judged, advisory).

Method: Judged by language model at low temperature: README accuracy versus actual projects, within a disclosed tolerance. Advisory, not a measured number.

Do you agree with this assessment?

P1 · CI/CD gates0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether an automated pipeline builds and tests every change.

Method: Filesystem scan: CI workflow files (.github/workflows, .gitlab-ci.yml, etc.) for build and test stages. Exhaustive, deterministic.

No CI workflow found (.github/workflows, azure-pipelines.yml, .gitlab-ci.yml, …) — changes aren't gated by an automated build/test.

What to do

Add a CI workflow that builds and runs the test suite on every push/PR.

Do you agree with this assessment?

P3 · Security & performance tooling0.0 / 10Critical✓ Tool-verified

Readiness · Readiness — Whether SAST, secret/dependency scanning and performance benchmarking are wired in (presence, not runtime).

Method: Filesystem scan: SAST configuration, dependency-update automation, secret scanning, and a benchmark harness or benchmark step — in this repository's own ecosystem. Exhaustive, deterministic.

No static application security testing detected. For this repository's stack, add spotbugs with find-sec-bugs (or `semgrep --config=auto`, which runs on any language) — this repository has no CI pipeline yet, so run it locally to clear the existing findings, then make it a step of the first workflow you add so a regression fails the build.

What to do

Run what this repository's stack ships: spotbugs with find-sec-bugs — or `semgrep --config=auto`, which runs on any language — — locally for now, since there is no CI pipeline here yet, and as a step of the first workflow you add so a security regression fails the build instead of landing.
Enable Dependabot/Renovate or a dependency-review gate.
Add gitleaks/trufflehog in CI to block PRs that introduce committed secrets.

Do you agree with this assessment?

P6 · Release Hygiene5.0 / 10Adequate✓ Tool-verified

Readiness · Readiness — Whether releases are traceable — a maintained changelog and explicit version stamping.

Method: Filesystem scan: changelog file presence and version tags in csproj or git tags. Exhaustive, deterministic.

No CHANGELOG/HISTORY/RELEASES file — what shipped when isn't easy to reconstruct for support or audit. (Versioning/tagging makes releases traceable, but a changelog records the what.)

What to do

Keep a changelog (e.g. Keep-a-Changelog) recording what shipped in each release.

Do you agree with this assessment?

Reference — by lens

The score is the rank-weighted fold of these lenses (worst-heaviest), each including its meta-dimensions; a lens with a Critical contributor is capped at Fair (its band reads "gated by …") and is never the strongest area however high its average.

Lens	Score	Rating	Impact
Code Health	100%	Exemplary	Strongest area.
Architecture	69%	Adequate	Acceptable, with room to improve.
Maturity	76%	Strong	Solid.
Readiness	26%	Weak — gated by P1, P3	Capped at Fair by a Critical contributor — resolve it before relying on this lens.
Security	100%	Exemplary	Solid.

Not included — 78 check(s) not relevant to this codebase

These checks had nothing to measure here (no tests, no git history, the codebase is small, or the architecture style doesn't apply), so they're omitted above rather than scored low.

AC1 Text alternatives — No web markup found — accessibility is not applicable to this repository.
AC2 Forms & labels — No web markup found — accessibility is not applicable to this repository.
AC3 Page structure — No web markup found — accessibility is not applicable to this repository.
AC4 Keyboard semantics — No web markup found — accessibility is not applicable to this repository.
AC5 ARIA correctness — No web markup found — accessibility is not applicable to this repository.
AC6 Visual & motion safety — No web markup found — accessibility is not applicable to this repository.
AC7 A11y enforcement — No web markup found — accessibility is not applicable to this repository.
AX1 Captive dependencies — no DI registrations detected
AX10 Code composition — not assessed — code composition is computed by ROLE over a document set that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX2 Stateful singletons — no singleton implementations detected
AX3 Project dependency cycles — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX4 Dependency direction — not assessed — project cycles and dependency direction are computed over a project-reference graph that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX6 Interface segregation — not assessed — interface segregation is computed over a type surface that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX7 Slice cohesion — not applicable — not a vertical-slice architecture
AX8 Test isolation — not assessed — test isolation is computed from a project graph (which projects are test projects, and what they reference) that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
AX9 CQS / query purity — no CQRS query handlers detected — query purity is not applicable to this codebase
AXB2 Runtime readiness — Advisory — this card reports evidence and never carries a score, so there is nothing missing here.
C1 Data Protection — Not assessed: these personal data controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks personal data controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C2 Access Controls — Not assessed: these authorization controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks authorization controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C3 Audit Trail — Not assessed: these audit controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks audit controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C4 Data Retention — Not assessed: these retention controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks retention controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
C5 Data-Subject Rights — Not assessed: these data-subject rights controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks data-subject rights controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
D1 Cyclomatic Complexity — Most of this repository's production source (.kt) had no cyclomatic complexity computed for it, so cyclomatic complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D10 Test Quality — ~66 lines of test source are present (.kt) but the test-quality collector reads C# only, so skipped/assertion-free tests couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
D11 Test Reliability — Test reliability not included
D12 Dependency Hygiene — Dependency hygiene not measured — dependency manifest found but not parsed for hygiene
D14 License Compliance — Not scored — this repository's package manifest is not parsed for licence data yet. A gap in the analyzer's language coverage, NOT a finding that the repository's licenses are compliant (a Gradle version catalogue), which this pass does not parse yet — so this dimension asserts nothing about this repository's licensing in either direction.
D15 Churn × Complexity Hotspots — complexity unreadable for .kt — churn × complexity hotspots could not be measured
D16 Bus Factor — early-stage repository — too few commits for a meaningful bus factor
D17 Explicit Debt — explicit-debt markers are read through a C# workspace today, so they were not read for this repository's language — this asserts nothing about how many markers the code carries. Not scored — this is a gap in the analyzer, not a finding about this repository
D18 Solution Shape — D18 scores the shape of a .NET solution; this repository has no .NET solution or project files, so the dimension does not apply.
D2 Cognitive Complexity — Most of this repository's production source (.kt) had no cognitive complexity computed for it, so cognitive complexity was not measured — whatever else this pass did read is not this repository's complexity. Not scored: no method bodies were exposed for those file kinds by any language model this pass could load. This is a gap in the analysis run, not a finding about this repository.
D20 ADR Quality — N/A — ADRs are expected on deployable products with a user-facing host, not consumed libraries; no ADR log is required here.
D22 Internal API Consistency — No exposed public API
D23 Boundary Type-Coupling — Production source is present (.kt) but bounded contexts are resolved over the C#/VB project set, which exposed none, so context scope could not be assessed. Not scored — this is a gap in the analyzer, not a verdict about this repository. Declaring the codebase's bounded contexts (≥2) would let cross-boundary type coupling be assessed — see the recommendation on this dimension for where. Declare them in `.codehealth/config.yaml` at the repository root (create it if absent), mapping each context name to the module-path or namespace prefixes that belong to it — e.g. `architecture:` → `contexts:` → `Billing: ["src/billing", "Acme.Billing"]`, `Catalog: ["src/catalog", "Acme.Catalog"]`.
D24 Comment Value — No inline comments to assess — comment value is not applicable here.
D25 ADR Conformance — no ADRs to check
D26 Project Cohesion — Project cohesion is assessed over the .NET project set; this target exposed no projects, so project size and spread could not be assessed. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D27 Navigability — No calls could be sampled, so navigability was not assessed — tracing effort is measured over resolved call sites and this target exposed none. Not scored — this is a gap in the analyzer's reach, not a verdict about this repository.
D30 Dependency Vulnerabilities — Not scored — no dependency manifest in a supported ecosystem was read for this repository. A gap in the analyzer's language coverage, NOT a finding that the repository is free of vulnerable dependencies (a Gradle version catalogue — not scanned yet) — where an OSV-supported manifest exists, dependency vulnerabilities for this repository are reported under D38 instead.
D31 IaC & Container Security — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.
D32 Data Compliance (PII/GDPR) — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.
D33 JS/npm Dependency Vulnerabilities — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.
D34 Knowledge Freshness — early-stage repository — too little history to judge knowledge freshness
D36 Supply-chain Provenance & Signing — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.
D37 Vulnerability-disclosure Policy — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.
D38 OSV Dependency Vulnerabilities — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.
D39 IL Efficiency — D39 measures the IL emitted by a .NET build; this repository has no .NET solution or project files, so the dimension does not apply.
D40 Network Egress Confinement — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.
D41 Kernel & Syscall Confinement — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.
D42 Runtime Threat Enforcement — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.
D5 Coupling — Inter-project coupling could not be assessed — no analyzable project graph was found for this repository. Not scored: a gap in the analyzer's reach, not a verdict about this repository. (Coupling here is Martin afferent/efferent/instability plus reference cycles across a project-reference graph, read today from .NET project files; other ecosystems' module graphs are not read yet.)
D6 Cohesion (LCOM4) — Cohesion (LCOM4) is measured over a C#/VB class graph, and this repository's production source is .kt, which this pass does not read — so no class could be assessed. Not scored — this is a gap in the analyzer, not a finding about this repository.
D7 Architectural Integrity — no checkable ADRs, and no project-reference graph for the cycle pass to read — so this dimension makes no claim about dependency cycles in either direction (where this repository's language has an import-cycle lens, cycles are reported there). Architectural integrity not assessed
D8 Code Coverage — Coverage not included — suite not readable by the collector
D9 Test Distribution — Test source is present (.kt) but the test-pyramid classifier reads C# only, so its unit/integration/BDD/E2E split couldn't be counted. Not scored — this is a gap in the analyzer, not a finding about this repository.
DM1 Domain Modelling — applicable but not scored (2 of 3 signals for this style — below the bar we score at): 2 value object(s); a Domain/Aggregates/ValueObjects layer
ED1 Event-Driven — not scored — this repository shows none of the 3 signals this check looks for
ED5 Idempotency — no mutating command handlers or message consumers detected — idempotency check not applicable
ES1 Event Sourcing — not scored — this repository shows none of the 3 signals this check looks for
GD1 Unfinished & placeholder code — no source files
IC1 Incompleteness & stubs — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P12 CI test-gate honesty — no CI workflow found
P2 Observability — Observability was not assessed: this check reads a source model that does not carry this repository's product — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of a logging idiom this check recognises is NOT evidence that this repo lacks structured logging (it may log through its own ecosystem's logger). This is a gap in the analyzer, not a finding about this repository.
P4 Deployment & Rollback — not evidenced — no deploy/rollback/approval signal in the repo; absence of evidence is not evidence of a manual release
P5 DR & Backup — not evidenced — repo shows no backup/RTO/RPO controls; absence of evidence is not evidence of a working control
P7 Outbound HTTP resilience — not measured — the application kind could not be determined for this repo
P8 Schema migrations — not assessed — schema-migration practice is read from a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
P9 Domain vs controller coverage — no coverage report found on disk — produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored, or wire coverage collection into CI, to enable this cross-layer check
PF1 Benchmark discipline — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF2 Allocation hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
PF3 Async & latency hygiene — Performance was not assessed: this lens reads a source model that was not loaded for this repository, because the repository is written in a language this lens does not yet model or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository — in particular it is NOT a statement that this repo is unpackaged or performance-careless.
S1 Web-Security Posture — Not assessed: these web-security controls are read from a source model (declarative annotations, request middleware, entity/column names, guard methods) that was not loaded for this repository — because the repository is written in a language this check does not yet model, or because its projects failed to load. Absence of an idiom this check recognises is NOT evidence that this repository lacks web-security controls: it may implement them entirely in its own ecosystem. This is a gap in the analyzer's language coverage, not a finding about this repository.
X1 Async correctness — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X2 Cancellation propagation — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X3 Exception handling — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X4 Structured logging — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository
X5 Nullable reference types — not analysed — these correctness checks read a source model that was not loaded for this repository, because the repository is written in a language this check does not yet model, or because its projects failed to load. This is a gap in the analyzer, not a finding about this repository

Appendix A — Findings (grouped)

The findings behind the scores, grouped by severity, then by dimension and kind. The high-severity issues are enumerated in full below; items per group are capped at 25 with any overflow stated explicitly per group, never silently truncated. The complete machine-readable list of every finding (all severities) is the companion findings.md in this report's bundle.

Recommendation — 5 finding(s)

D11 · Test Reliability · Test reliability not included · ×1

Test reliability not included — Test source is present (.kt) but the built-in reliability runner does not support this repository's ecosystem, so flakiness couldn't be assessed. Not scored — this is a gap in the analyzer's language coverage, not a finding about this repository.

D15 · Churn × Complexity Hotspots · complexity unreadable for .kt · ×1

complexity unreadable for .kt — churn × complexity hotspots could not be measured — A hotspot is churn × complexity. Churn was measured (0 line(s) across the 90-day window), but no complexity could be computed for .kt, which is most of this repository's production code — so every churned file would score as complexity 0 and the hotspot list would be empty no matter how tangled the code is. Not scored — this is a gap in the analysis run, not a finding about this repository.

D16 · Bus Factor · early-stage repository · ×1

early-stage repository — too few commits for a meaningful bus factor — early-stage repository — too few commits for a meaningful bus factor (3 author(s) across 19 commit(s) sampled).

D34 · Knowledge Freshness · early-stage repository · ×1

early-stage repository — too little history to judge knowledge freshness — early-stage repository — too little history to judge knowledge freshness (19 commit(s) sampled).

D8 · Code Coverage · Coverage not included · ×1

Coverage not included — suite not readable by the collector — Coverage NOT MEASURED: test source is present (.kt) but the built-in coverage collector has no runner for this repository's ecosystem — so this suite was never executed by it. Not scored — this is a gap in the analyzer's language coverage, not a defect in the repo. To have real coverage read, produce a coverage report in a standard format (JaCoCo XML — the Gradle `jacocoTestReport` task) into the repo working tree before the scan — a CI step is the usual place, since the artefact is commonly gitignored.

Info — 3 finding(s)

D12 · Dependency Hygiene · Dependency hygiene not measured · ×1

Dependency hygiene not measured — dependency manifest found but not parsed for hygiene — This repository's dependency manifest (a Gradle version catalogue) was found, but this pass cannot parse it for hygiene, so no package was assessed. Zero packages read is NOT a clean dependency tree, so this is NOT SCORED — a gap in the analyzer, not a verdict about this repository. This row is about dependency HYGIENE — outdated, deprecated or unmaintained direct dependencies; known CVEs in the same dependency graph are a separate question, reported under D38 wherever the manifest is OSV-readable.

D22 · Internal API Consistency · No exposed public API · ×1

No exposed public API — No intentionally-exposed types (IsPackable or .Contracts) to evaluate.

D35 · Change Coupling · git history depth insufficient · ×1

git history depth insufficient — git history depth insufficient — a full clone gives reliable change-coupling.

Appendix B — Reproduction & audit trail

Every external tool invocation behind a deep-scan dimension — the tool, its captured version, the exact command, how many findings it yielded, and a link to the retained raw output. To reproduce any finding: check out the same commit and run the command shown (repo-relative — never an absolute scratch path). The complete raw scanner output is retained verbatim under artifacts/raw/ (indexed in artifacts/raw/index.json); per-invocation exit codes and wall-clock durations are in sidecar.json — kept out of this table so the rendered report stays byte-identical across runs of the same commit.

Dimension	Tool	Version	Command	Raw output
D28 · Secrets (history)	gitleaks	—	gitleaks detect --no-banner --report-format json --report-path /dev/stdout --exit-code 0 --source .	artifacts/raw/gitleaks-history.json
D29 · Static Analysis (SAST)	semgrep	—	semgrep --config /opt/semgrep-rules/security-audit.yml --config /opt/semgrep-rules/owasp-top-ten.yml --json --quiet --timeout 0 --metrics off .	artifacts/raw/semgrep.json
D30 · Dependency Vulnerabilities	none (no readable dependency manifest)	—	none (no readable dependency manifest): not present in this environment	—
D31 · IaC & Container Security	trivy	—	trivy: not applicable — No Infrastructure-as-Code or container manifests found (Dockerfile, Terraform, Kubernetes/Helm, CloudFormation); nothing to scan.	—
D32 · Data Compliance (PII/GDPR)	semgrep	—	semgrep: not applicable — No PII/GDPR-handling patterns detected (p/gdpr ruleset) — no data-compliance surface to assess.	—
D33 · JS/npm Dependency Vulnerabilities	trivy	—	trivy: not applicable — No JS/npm manifest or lockfile found outside build output (package.json, package-lock.json, yarn.lock, pnpm-lock.yaml, bun.lockb); no JS dependencies to scan.	—
D36 · Supply-chain Provenance & Signing	provenance	—	provenance: not applicable — No CI/build pipeline found (.github/.forgejo/.gitea workflows, .gitlab-ci.yml, azure-pipelines*.yml, .pipelines/, .vsts-ci/, Jenkinsfile, .circleci); there is no build to attest provenance for.	—
D37 · Vulnerability-disclosure Policy	disclosure	—	disclosure: not applicable — No vulnerability-disclosure policy file found (SECURITY.md/.markdown/.rst/.txt at root or under .github/.forgejo/.gitea/docs, .well-known/security.txt). A coordinated-disclosure policy may live off-repo, so this is not evidenced rather than failed.	—
D38 · OSV Dependency Vulnerabilities	osv-scanner	—	osv-scanner: not applicable — No supported non-.NET dependency lockfile found outside build output (npm package-lock/yarn/pnpm/bun, Go go.mod, Rust Cargo.lock, Maven pom.xml, Gradle lockfiles, Python requirements.txt/poetry.lock/Pipfile.lock/pdm.lock, PHP composer.lock, Ruby Gemfile.lock, Elixir mix.lock, Dart pubspec.lock, Swift Package.resolved); nothing for OSV to scan. A NuGet-only repo stays NotApplicable — .NET CVEs are D30's domain.	—
D40 · Network Egress Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; network egress policy is a cluster-native control that may live at the platform/firewall layer, so there is nothing to assess here.	—
D41 · Kernel & Syscall Confinement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; seccomp/AppArmor/SELinux confinement is a workload-level control, so there is nothing to assess here.	—
D42 · Runtime Threat Enforcement	runtime-hardening	—	runtime-hardening: not applicable — No Kubernetes/orchestration workloads found in the repository manifests; runtime threat-detection and admission-control policy are cluster-level controls, so there is nothing to assess here.	—

Run 019fc9fc-a4f5-7ccc-aa48-d9c2c19bf48f · every finding is also locatable in findings.md, and the complete scoring record (with exit codes + durations) in sidecar.json.

Spanierm42/archunit-Junit5-Kotlin

Executive summary

Top priorities

Diagnosis — what's actually going on

Architecture — module dependency matrix

At a glance — Code Health · 100% · Exemplary

At a glance — Architecture · 69% · Adequate

At a glance — Maturity · 76% · Strong

At a glance — Readiness · 26% · Weak · gated by P1, P3

At a glance — Security · 100% · Exemplary

Roadmap

Methodology & how to trust this report

Tools & methods

Run transparency — what happened this run

Limitations & what we did not check

Per-dimension blind spots

The LLM boundary

Dimensions

Frontend & cross-cutting dimensions

Reference — by lens

Appendix A — Findings (grouped)

Appendix B — Reproduction & audit trail

Downloadable artifacts